STMicroelectronics

STM32L471QGI6 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics

MPN: STM32L471QGI6 ✓ সক্রিয়
1.71 V to 3.6 V Vdss 132-UFBGA (7 x 7 mm) Package 80 MHz Speed 1 MB (1M x 8) Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

STM32L471QGI6 সারাংশ

The STMicroelectronics STM32L471QGI6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 RISC core, operating at up to 80 MHz, with 1 MB of Flash memory and 128 KB of SRAM in a 132-pin UFBGA package measuring 7 x 7 mm. It supports a 1.71 V to 3.6 V supply range and is specified for -40°C to +85°C operation.

A microcontroller is a programmable system-on-chip that integrates a CPU, memory, peripheral interfaces, and clocking into one device. The STM32L4 family belongs to the hierarchy microcontroller -> embedded processor -> programmable controller -> semiconductor. Its low-power design and broad peripheral integration make this class of device useful for compact embedded products that must balance processing capability, energy efficiency, and board area.

Key features include the 80 MHz Arm Cortex-M4 core, 1 MB of Flash, 128 KB of SRAM, 12-bit conversion peripherals, and support for up to 109 I/O functions according to the listed product specifications. The STM32L471QGI6 also includes DFSDM capability, providing a digital filter for sigma-delta modulator-based signal acquisition. Its 132-UFBGA package supports a high pin count while occupying only 7 x 7 mm of board area.

The device operates from a 1.71 V to 3.6 V supply and combines an Arm Cortex-M4 processor with integrated Flash and SRAM for compact firmware storage and working memory. Its industrial temperature range covers -40°C to +85°C, supporting applications in consumer equipment, industrial controls, connected sensors, portable instrumentation, and compact automation products. The broad supply range also allows deployment from low-voltage battery-powered systems through conventional 3.3 V equipment.

Typical applications include low-power sensor nodes, industrial data-acquisition modules, portable measurement instruments, compact motor and process controllers, and connected embedded-control products. In each case, the 80 MHz processing rate supports responsive control and communication tasks, while DFSDM and the 12-bit conversion capabilities support analog-signal acquisition. The 7 x 7 mm UFBGA package is especially useful when component footprint and I/O density are important design constraints.

PCB design requires careful attention to the 132-pin UFBGA escape routing and thermal management. Follow the manufacturer's land pattern, pin table, and recommended decoupling arrangement exactly; assign every ball from the package drawing rather than relying on inferred pin functions. For low-power operation, select the appropriate clock, peripheral, and sleep configuration in firmware, and confirm timing at the minimum operating voltage and maximum temperature.

This product page consolidates the key device characteristics, sourcing information, application guidance, and engineering considerations needed to evaluate the STM32L471QGI6 before starting a compact embedded-control design.

এর জন্য ড্রপ-ইন বিকল্প STM32L471QGI6 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible STM32L471QGI6 (একই form factor এবং footprint) — পার্থক্য রয়েছে Operating Temperature Range, Package.

STMicroelectronics
Operating Temperature Range: -40C to +85C
Package: LQFP-144 (20 x 20 mm)
এর সাথে তুলনা করুন STM32L471QGI6 →

এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।

বিকল্প অনুরোধ করুন

STM32L471QGI6 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type 32-bit ultra-low-power microcontroller
Processor Core Arm Cortex-M4 with FPU
Architecture 32-bit RISC
Maximum CPU Frequency 80 MHz
Program Flash Memory 1 MB (1M x 8)
SRAM 128 KB
Operating Supply Voltage Range 1.71 V to 3.6 V
অপারেটিং তাপমাত্রার পরিসর -40°C to +85°C
ADC Resolution 12 bit
DAC Resolution 12 bit
I/O Functions 109
Digital Filter DFSDM support
প্যাকেজ 132-UFBGA (7 x 7 mm)
Package Type UFBGA
পিন সংখ্যা 132 pins
মাউন্টিং টাইপ Surface Mount
RoHS স্ট্যাটাস Compliant

STM32L471QGI6 ufbga পিন কনফিগারেশন গাইড

STM32L471QGI6 (ufbga প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

STM32L471QGI6-এর জন্য ufbga প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি STM32L471QGI6.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

STM32L471QGI6 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Battery-Powered Sensor Nodes, Industrial Data-Acquisition Modules, Portable Measurement Instruments, Compact Automation Controllers, Connected Sensor and IoT Gateways, Low-Power Audio and Signal Conditioning.

🧩

Battery-Powered Sensor Nodes

The STM32L471QGI6 fits battery-powered sensor nodes because it combines an Arm Cortex-M4 core operating up to 80 MHz with a 1.71 V to 3.6 V supply range and 1 MB of Flash. Firmware can acquire sensor data, apply local filtering, and manage low-power sleep intervals without requiring a separate processor or storage device. The 128 KB of SRAM supports working data and protocol buffers, while DFSDM can serve compatible sigma-delta acquisition paths. Battery life ultimately depends on the selected sleep modes, sensor duty cycle, leakage current, and regulator efficiency.

🏭

Industrial Data-Acquisition Modules

The STM32L471QGI6 is suitable for industrial data-acquisition modules that need local signal processing in a small board area. Its 12-bit ADC, 12-bit DAC, DFSDM capability, 109 I/O functions, and 80 MHz Cortex-M4 core support acquisition, filtering, control, and communication tasks in one device. The industrial temperature specification of -40°C to +85°C covers many deployed environments. Actual input bandwidth and channel count depend on the selected analog front end, pin multiplexing, and acquisition timing documented by STMicroelectronics.

📱

Portable Measurement Instruments

The STM32L471QGI6 supports portable measurement instruments where low voltage, local processing, and high component density are important. Its Cortex-M4 core can execute measurement algorithms at up to 80 MHz, while 1 MB of Flash provides room for calibration tables, communication stacks, and user-interface firmware. The 7 x 7 mm 132-UFBGA package reduces occupied area compared with many leaded or high-pin-count alternatives. Layout planning is critical because 132 balls require disciplined escape routing, adequate copper, and careful power-plane distribution.

🔧

Compact Automation Controllers

The STM32L471QGI6 is appropriate for compact automation controllers that combine digital I/O, analog monitoring, and local communications. Its 109 I/O functions provide substantial connectivity, and the 80 MHz Arm Cortex-M4 core can execute deterministic control logic and communication protocols. The 1 MB of Flash and 128 KB of SRAM are useful for more capable firmware than a basic low-end controller. Designers should map signal directions, debug functions, clock sources, and power pins directly from the official 132-UFBGA pin table before finalizing the layout.

🌐

Connected Sensor and IoT Gateways

The STM32L471QGI6 can serve as the control processor in a connected sensor or IoT gateway that must combine protocol handling with local acquisition. Its 80 MHz Cortex-M4 core, 1 MB of Flash, and 128 KB of SRAM support networking stacks, sensor aggregation, configuration storage, and local control. The low 1.71 V operating limit assists battery and energy-harvested designs, although the complete power architecture must account for radio load and regulator efficiency. DFSDM support is useful for compatible digital sensor interfaces and precision acquisition paths.

🎧

Low-Power Audio and Signal Conditioning

The STM32L471QGI6 can perform low-power signal conditioning when a system includes compatible digital sensor or sigma-delta front ends. The DFSDM function supports digital-filter workflows, while the 12-bit ADC and DAC provide additional analog conversion resources for control and test loops. At up to 80 MHz, the Cortex-M4 core can manage filtering, calibration, and interface tasks alongside the acquisition process. Signal integrity depends on analog grounding, reference quality, decoupling, and separating sensitive acquisition routes from switching and high-current signals.

What is the STM32L471QGI6?
The STM32L471QGI6 is an ultra-low-power, 32-bit Arm Cortex-M4 microcontroller rated for up to 80 MHz, with 1 MB of Flash, 128 KB of SRAM, and a 7 x 7 mm 132-UFBGA package. According to the STMicroelectronics STM32L471QG product page, the STM32L471xx devices use the high-performance Arm Cortex-M4 RISC core. It is intended for compact, low-power embedded systems that require substantial Flash storage, real-time processing, and extensive peripheral integration.
What are the key specifications of STM32L471QGI6 that engineers should know?
The STM32L471QGI6 combines an 80 MHz Arm Cortex-M4 core, 1 MB of Flash memory, 128 KB of SRAM, a 1.71 V to 3.6 V operating range, and 109 I/O functions in a 132-UFBGA package. The listed specifications also identify 12-bit ADC and DAC resolution plus DFSDM support. These figures place the device in the low-power STM32L4 portfolio and define its main design limits for storage, analog conversion, signal acquisition, and package routing.
What is the operating voltage of STM32L471QGI6?
The STM32L471QGI6 operates from 1.71 V to 3.6 V according to the STM32L471QGI6 product listing. This range supports low-voltage portable designs as well as conventional 3.3 V industrial and instrumentation equipment. The manufacturer product page identifies the STM32L471QG family as an ultra-low-power Arm Cortex-M4 platform. Confirm each external regulator's tolerance, startup behavior, and bypass requirements against the manufacturer datasheet before releasing the PCB.
What is the maximum clock frequency of STM32L471QGI6?
The STM32L471QGI6 supports an Arm Cortex-M4 core operating at up to 80 MHz. According to the STMicroelectronics STM32L471QG product page, the STM32L471xx family is built around a high-performance 32-bit RISC core with this maximum operating frequency. Actual clock behavior depends on the selected internal or external clock source, voltage conditions, firmware configuration, and peripheral clock requirements described in the manufacturer documentation.
How much Flash and SRAM does STM32L471QGI6 have?
The STM32L471QGI6 provides 1 MB of program Flash memory and 128 KB of SRAM. Its 1 MB Flash capacity is organized as 1M x 8, as stated in the product listings, while the SRAM provides working space for firmware, data, and peripherals. The STM32L471QG manufacturer page confirms the STM32L471xx family's low-power architecture. For firmware sizing, include bootloader, application code, update data, and configuration storage in the final Flash budget.
Where to download the STM32L471QGI6 datasheet PDF?
The official STM32L471QGI6 technical documents are reached through the STM32L471QG manufacturer product page at https://www.st.com/en/microcontrollers-microprocessors/stm32l471qg.html. From that page, select the associated datasheet and technical documentation for the complete electrical characteristics, 132-UFBGA pin table, package drawings, clock limits, and peripheral descriptions. The distributor datasheet page at https://www.datasheets.com/stmicroelectronics/stm32l471qgi6 is a secondary route, but STMicroelectronics remains the authoritative source.
Where can I find the STM32L471QGI6 pinout and package information?
The STM32L471QGI6 pinout is defined by its 132-UFBGA, 7 x 7 mm package drawing on the STMicroelectronics STM32L471QG product documentation. Use the manufacturer pin table when assigning power, ground, clock, debug, communications, and analog functions to the 132 balls. The public search results confirm the package identity and dimensions, but do not expose a complete verified ball-by-ball pin list. Start with the official package drawing and pin-description table before laying out escape traces.
What can replace STM32L471QGI6?
The STM32L471QGI6 should be replaced only with a device that has the same 132-UFBGA footprint, compatible ball assignments, equivalent power and clock requirements, and sufficiently close memory and peripheral characteristics. The targeted substitute search did not identify a defensible cross-manufacturer drop-in replacement for this exact package and pinout. The STM32L471QGI6TR appears in the listings, but it is a tape-and-reel order code for the same device rather than an engineering alternative. Use STMicroelectronics for an approved second source when available.
Is STM32L471QGI6 the same as STM32L471QGI6TR?
The STM32L471QGI6 and STM32L471QGI6TR refer to the same core 132-UFBGA microcontroller configuration, while the trailing TR identifies tape-and-reel delivery. The distributor listings describe both as 80 MHz Arm Cortex-M4 devices with 1 MB of Flash in a 132-UFBGA package. The TR version is therefore a packaging and order-code variation, not a different drop-in substitute with improved electrical performance. Confirm reel orientation, quantity, and the manufacturer's ordering information before changing the BOM.
When should I choose STM32L471QGI6 instead of another STM32L4 MCU?
Choose STM32L471QGI6 when the design needs the combination of an 80 MHz Cortex-M4 core, 1 MB of Flash, 128 KB of SRAM, DFSDM support, and a dense 132-UFBGA footprint. The package is appropriate when roughly 109 I/O functions justify a 7 x 7 mm ball-grid layout. Select a different STM32L4 variant when its package is simpler, its memory requirement is lower, or a different peripheral mix better matches the product. Package migration may require PCB changes even within the same device family.
Is STM32L471QGI6 suitable for battery-powered sensor applications?
The STM32L471QGI6 is suitable for battery-powered sensor applications when its low-power operating modes and 1.71 V minimum supply are used correctly. Its Arm Cortex-M4 core can handle local filtering and control, while the 1 MB of Flash avoids an external storage device for moderate firmware images. The DFSDM capability is also useful for compatible sigma-delta acquisition paths. Actual battery life depends on the sleep configuration, sensor duty cycle, radio activity, leakage, and regulator efficiency.
How does STM32L471QGI6 support industrial data acquisition?
The STM32L471QGI6 supports compact data-acquisition designs through its 12-bit ADC, 12-bit DAC, DFSDM capability, 80 MHz processing bandwidth, and 109 I/O functions. These resources allow a controller to collect sensor signals, perform digital filtering, drive analog outputs, and manage communications within one device. The -40°C to +85°C operating range supports industrial-temperature requirements. Signal bandwidth, channel count, acquisition latency, and analog front-end requirements must be checked in the detailed datasheet.
What is the best STMicroelectronics equivalent for STM32L471QGI6?
The closest defensible STMicroelectronics ordering option is STM32L471QGI6TR, which represents the same STM32L471QGI6 device supplied in tape-and-reel format. It retains the listed 80 MHz Cortex-M4 core, 1 MB Flash, and 132-UFBGA configuration, making it usable when the mechanical design already matches that footprint. It is not a distinct performance alternative. For a second-source MCU, verify the full pinout, electrical timing, peripheral mapping, firmware support, qualification, and supply conditions rather than treating a generic STM32L4 device as interchangeable.
Where to buy STM32L471QGI6 online?
Use the Request a Quote form on this page to request STM32L471QGI6 availability, order quantity, lead time, and current commercial terms. The component is listed by STMicroelectronics as an 80 MHz Cortex-M4 MCU with 1 MB of Flash in a 132-UFBGA package, and the manufacturer product page is linked above. Buyers should include the required package form, tray or reel delivery preference, production quantity, and target delivery date when requesting the quotation.
What is the price and lead time of STM32L471QGI6?
The current price and lead time for STM32L471QGI6 should be requested through the Request a Quote form on this page because commercial terms can change with quantity, package form, and market conditions. The public listings identify the exact 132-UFBGA device, but they do not provide a qualifying quantity-break table for this response. Include the required order quantity, whether the delivery format is tray or tape-and-reel, and the desired production schedule to obtain an actionable quotation.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা STM32L471QGI6 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the STM32L471QGI6 when a compact design needs the combination of an 80 MHz Arm Cortex-M4 core, 1 MB of Flash, 128 KB of SRAM, 12-bit conversion resources, DFSDM support, and 109 I/O functions. Its 132-UFBGA package is attractive for dense industrial, acquisition, connected-sensing, and portable-instrument products, but it increases PCB-layout complexity and demands careful escape routing. The STM32L471QGI6TR is the appropriate same-device selection when the required production form is tape-and-reel rather than a tray; it does not provide a different performance level. Consider another STM32 family member when the design can use a simpler package, requires different peripheral resources, or needs qualification for a specific market program. Do not substitute a generic STM32L4 MCU solely by matching flash size, because ball assignments, voltage timing, peripheral mapping, and pin multiplexing can differ.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য
Package 132-UFBGA (7 x 7 mm)
Brand STMicroelectronics
Processor Core Arm Cortex-M4
Maximum CPU Frequency 80 MHz
Program Flash Memory 1 MB
SRAM 128 KB
Operating Supply Voltage Range 1.71 V to 3.6 V
Operating Temperature Range -40°C to +85°C
ADC Resolution 12 bit
Digital Filter Support DFSDM

মূল পার্থক্যসমূহ

  • Combines high-density integration with substantial embedded memory (বনামSTM32L471QGI6TR)
  • Supports precision signal-acquisition designs (বনামSTM32L471QGI6TR)
  • Fits substantial I/O requirements into a compact package (বনামSTM32L471QGI6TR)

ডিজাইন নোট

Use the official STM32L471QGI6 132-UFBGA land pattern and pin-description table without altering pad geometry or ball assignments. A 7 x 7 mm package leaves little room for arbitrary escape routing, so establish board layers, fanout strategy, and return paths before placing decoupling capacitors. Provide a continuous ground reference beneath the device where the recommended footprint permits it, and route high-speed or sensitive analog signals away from switching-node and digital-clock currents.

Place the regulator, local bulk capacitance, and high-frequency decoupling network so the power loop remains small and follows the manufacturer's recommended topology. Verify startup across the full 1.71 V to 3.6 V supply range and account for peripheral load changes, especially when radio, displays, or actuators share the supply. Low-voltage operation and transient response must both be validated; a regulator that starts correctly at 3.3 V may not provide adequate margin at 1.71 V.

The compact UFBGA package can concentrate heat around the die, so thermal performance depends on board construction, exposed thermal features, copper area, and surrounding airflow. Estimate worst-case dissipation from the actual clock rate, active peripherals, I/O loading, and supply voltage rather than relying on a nominal operating mode. Validate junction-temperature margin at the maximum -40°C to +85°C specification boundary and under sustained processing load rather than at idle conditions.

Preserve a continuous return path beneath analog and high-speed signals, separate analog inputs from switching and high-current outputs, and place analog filtering components close to their associated pins. If DFSDM or the ADC is used, confirm source impedance, sampling timing, reference stability, and the required anti-aliasing network. Changes to clock frequency, GPIO drive settings, or peripheral clocks can affect signal integrity, so review the final configuration with an oscilloscope.

কমপ্লায়েন্স তথ্য

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The STM32L471QGI6 product listing identifies RoHS compliance. The manufacturer product page and available listings do not establish REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for this exact order code.

ডেটা যাচাই করা হয়েছে: 2026-11-14 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

STM32L471QGI6 datasheet STM32L471QGI6 pinout STM32L471QGI6 datasheet pdf STM32L471QGI6 specifications STM32L471QGI6 equivalent STM32L471QGI6 replacement STM32L471QGI6 cross reference STM32L471QGI6 price STM32L471QGI6 stock STMicroelectronics STM32L471QGI6 STM32L471QGI6 132 UFBGA STM32L471QGI6 80MHz Cortex-M4 STM32L471QGI6 DFSDM application STM32L471QGI6 vs STM32L471QGI6TR STM32L471QGI6 footprint

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

STMicroelectronics STM32L471QGI6 STM32L471QGI6TR STM32L471QG Arm Arm Cortex-M4 Cortex-M4 FPU STM32L4 microcontroller embedded processor programmable controller semiconductor 1 MB Flash 128 KB SRAM 80 MHz DFSDM 12-bit ADC 12-bit DAC 132-UFBGA UFBGA ball-grid array surface mount RoHS industrial data acquisition battery-powered sensor node
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন