STM32L471QGI6 - 80MHz Cortex-M4 1MB MCU | STMicroelectronics
MPN: STM32L471QGI6 ✓ 啟用中STM32L471QGI6 概覽
A microcontroller is a programmable system-on-chip that integrates a CPU, memory, peripheral interfaces, and clocking into one device. The STM32L4 family belongs to the hierarchy microcontroller -> embedded processor -> programmable controller -> semiconductor. Its low-power design and broad peripheral integration make this class of device useful for compact embedded products that must balance processing capability, energy efficiency, and board area.
Key features include the 80 MHz Arm Cortex-M4 core, 1 MB of Flash, 128 KB of SRAM, 12-bit conversion peripherals, and support for up to 109 I/O functions according to the listed product specifications. The STM32L471QGI6 also includes DFSDM capability, providing a digital filter for sigma-delta modulator-based signal acquisition. Its 132-UFBGA package supports a high pin count while occupying only 7 x 7 mm of board area.
The device operates from a 1.71 V to 3.6 V supply and combines an Arm Cortex-M4 processor with integrated Flash and SRAM for compact firmware storage and working memory. Its industrial temperature range covers -40°C to +85°C, supporting applications in consumer equipment, industrial controls, connected sensors, portable instrumentation, and compact automation products. The broad supply range also allows deployment from low-voltage battery-powered systems through conventional 3.3 V equipment.
Typical applications include low-power sensor nodes, industrial data-acquisition modules, portable measurement instruments, compact motor and process controllers, and connected embedded-control products. In each case, the 80 MHz processing rate supports responsive control and communication tasks, while DFSDM and the 12-bit conversion capabilities support analog-signal acquisition. The 7 x 7 mm UFBGA package is especially useful when component footprint and I/O density are important design constraints.
PCB design requires careful attention to the 132-pin UFBGA escape routing and thermal management. Follow the manufacturer's land pattern, pin table, and recommended decoupling arrangement exactly; assign every ball from the package drawing rather than relying on inferred pin functions. For low-power operation, select the appropriate clock, peripheral, and sleep configuration in firmware, and confirm timing at the minimum operating voltage and maximum temperature.
This product page consolidates the key device characteristics, sourcing information, application guidance, and engineering considerations needed to evaluate the STM32L471QGI6 before starting a compact embedded-control design.
直接替換替代品,適用於 STM32L471QGI6 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: STM32L471QGI6 (相同外形與佔位) — 差異在於 Operating Temperature Range, Package.
此產品無可直接替換的替代品。
申請替代品STM32L471QGI6 最大額定值與電氣特性
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M4 with FPU |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 80 MHz |
| Program Flash Memory | 1 MB (1M x 8) |
| SRAM | 128 KB |
| Operating Supply Voltage Range | 1.71 V to 3.6 V |
| 工作溫度範圍 | -40°C to +85°C |
| ADC Resolution | 12 bit |
| DAC Resolution | 12 bit |
| I/O Functions | 109 |
| Digital Filter | DFSDM support |
| 封裝 | 132-UFBGA (7 x 7 mm) |
| Package Type | UFBGA |
| 腳位數 | 132 pins |
| 安裝類型 | Surface Mount |
| RoHS 狀態 | Compliant |
STM32L471QGI6 ufbga 腳位配置指南
STM32L471QGI6(ufbga 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: STM32L471QGI6.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32L471QGI6 適用於 6 應用s: Battery-Powered Sensor Nodes, Industrial Data-Acquisition Modules, Portable Measurement Instruments, Compact Automation Controllers, Connected Sensor and IoT Gateways, Low-Power Audio and Signal Conditioning.
Battery-Powered Sensor Nodes
The STM32L471QGI6 fits battery-powered sensor nodes because it combines an Arm Cortex-M4 core operating up to 80 MHz with a 1.71 V to 3.6 V supply range and 1 MB of Flash. Firmware can acquire sensor data, apply local filtering, and manage low-power sleep intervals without requiring a separate processor or storage device. The 128 KB of SRAM supports working data and protocol buffers, while DFSDM can serve compatible sigma-delta acquisition paths. Battery life ultimately depends on the selected sleep modes, sensor duty cycle, leakage current, and regulator efficiency.
推薦
Industrial Data-Acquisition Modules
The STM32L471QGI6 is suitable for industrial data-acquisition modules that need local signal processing in a small board area. Its 12-bit ADC, 12-bit DAC, DFSDM capability, 109 I/O functions, and 80 MHz Cortex-M4 core support acquisition, filtering, control, and communication tasks in one device. The industrial temperature specification of -40°C to +85°C covers many deployed environments. Actual input bandwidth and channel count depend on the selected analog front end, pin multiplexing, and acquisition timing documented by STMicroelectronics.
推薦
Portable Measurement Instruments
The STM32L471QGI6 supports portable measurement instruments where low voltage, local processing, and high component density are important. Its Cortex-M4 core can execute measurement algorithms at up to 80 MHz, while 1 MB of Flash provides room for calibration tables, communication stacks, and user-interface firmware. The 7 x 7 mm 132-UFBGA package reduces occupied area compared with many leaded or high-pin-count alternatives. Layout planning is critical because 132 balls require disciplined escape routing, adequate copper, and careful power-plane distribution.
推薦
Compact Automation Controllers
The STM32L471QGI6 is appropriate for compact automation controllers that combine digital I/O, analog monitoring, and local communications. Its 109 I/O functions provide substantial connectivity, and the 80 MHz Arm Cortex-M4 core can execute deterministic control logic and communication protocols. The 1 MB of Flash and 128 KB of SRAM are useful for more capable firmware than a basic low-end controller. Designers should map signal directions, debug functions, clock sources, and power pins directly from the official 132-UFBGA pin table before finalizing the layout.
推薦
Connected Sensor and IoT Gateways
The STM32L471QGI6 can serve as the control processor in a connected sensor or IoT gateway that must combine protocol handling with local acquisition. Its 80 MHz Cortex-M4 core, 1 MB of Flash, and 128 KB of SRAM support networking stacks, sensor aggregation, configuration storage, and local control. The low 1.71 V operating limit assists battery and energy-harvested designs, although the complete power architecture must account for radio load and regulator efficiency. DFSDM support is useful for compatible digital sensor interfaces and precision acquisition paths.
推薦
Low-Power Audio and Signal Conditioning
The STM32L471QGI6 can perform low-power signal conditioning when a system includes compatible digital sensor or sigma-delta front ends. The DFSDM function supports digital-filter workflows, while the 12-bit ADC and DAC provide additional analog conversion resources for control and test loops. At up to 80 MHz, the Cortex-M4 core can manage filtering, calibration, and interface tasks alongside the acquisition process. Signal integrity depends on analog grounding, reference quality, decoupling, and separating sensitive acquisition routes from switching and high-current signals.
推薦
推薦產品摘要
工程參考資料,適用於 STM32L471QGI6 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Package | 132-UFBGA (7 x 7 mm) |
| Brand | STMicroelectronics |
| Processor Core | Arm Cortex-M4 |
| Maximum CPU Frequency | 80 MHz |
| Program Flash Memory | 1 MB |
| SRAM | 128 KB |
| Operating Supply Voltage Range | 1.71 V to 3.6 V |
| Operating Temperature Range | -40°C to +85°C |
| ADC Resolution | 12 bit |
| Digital Filter Support | DFSDM |
主要差異化特點
- Combines high-density integration with substantial embedded memory (對比STM32L471QGI6TR)
- Supports precision signal-acquisition designs (對比STM32L471QGI6TR)
- Fits substantial I/O requirements into a compact package (對比STM32L471QGI6TR)
設計說明
Use the official STM32L471QGI6 132-UFBGA land pattern and pin-description table without altering pad geometry or ball assignments. A 7 x 7 mm package leaves little room for arbitrary escape routing, so establish board layers, fanout strategy, and return paths before placing decoupling capacitors. Provide a continuous ground reference beneath the device where the recommended footprint permits it, and route high-speed or sensitive analog signals away from switching-node and digital-clock currents.
Place the regulator, local bulk capacitance, and high-frequency decoupling network so the power loop remains small and follows the manufacturer's recommended topology. Verify startup across the full 1.71 V to 3.6 V supply range and account for peripheral load changes, especially when radio, displays, or actuators share the supply. Low-voltage operation and transient response must both be validated; a regulator that starts correctly at 3.3 V may not provide adequate margin at 1.71 V.
The compact UFBGA package can concentrate heat around the die, so thermal performance depends on board construction, exposed thermal features, copper area, and surrounding airflow. Estimate worst-case dissipation from the actual clock rate, active peripherals, I/O loading, and supply voltage rather than relying on a nominal operating mode. Validate junction-temperature margin at the maximum -40°C to +85°C specification boundary and under sustained processing load rather than at idle conditions.
Preserve a continuous return path beneath analog and high-speed signals, separate analog inputs from switching and high-current outputs, and place analog filtering components close to their associated pins. If DFSDM or the ADC is used, confirm source impedance, sampling timing, reference stability, and the required anti-aliasing network. Changes to clock frequency, GPIO drive settings, or peripheral clocks can affect signal integrity, so review the final configuration with an oscilloscope.
合規資訊
The STM32L471QGI6 product listing identifies RoHS compliance. The manufacturer product page and available listings do not establish REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for this exact order code.