STM32L475VCT6 - 80MHz Cortex-M4 MCU | STMicroelectronics
MPN: STM32L475VCT6 ✓ সক্রিয়STM32L475VCT6 সারাংশ
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The STM32L4 family belongs to the Arm Cortex-M4 microcontroller hierarchy, combining real-time control performance with low-power operation. Within this family, the STM32L475VC device targets applications requiring a balance of processing throughput, memory capacity, connectivity, and analog signal acquisition.
The Cortex-M4 core operates at up to 80 MHz and supports single-precision floating-point calculations and a full set of DSP instructions. Its 256 KB Flash memory provides 256K x 8 storage, while the integrated USB OTG interface supports connected USB applications. DFSDM capability is useful for direct digital conversion of signals from sigma-delta modulators, reducing the need for separate analog front-end components.
The STM32L475VCT6 combines conventional MCU processing with dedicated communication and signal-processing peripherals. USB OTG supports dual-role, device, or host-oriented designs when the board design and firmware support the required configuration. DFSDM can reduce signal-chain size in precision acquisition systems, while the Cortex-M4 DSP and FPU instructions accelerate filtering and control calculations. These features support an efficient architecture without requiring a separate DSP or communications processor.
Typical uses include industrial monitoring, portable medical instruments, low-power sensor nodes, USB-connected data acquisition, embedded control systems, and consumer devices with local signal processing. The device is particularly suitable when firmware must perform control-loop work, data conditioning, and USB communication in a single microcontroller. Its 100-pin LQFP package also provides a practical choice for prototype boards and designs requiring a generous pin count.
PCB implementation should preserve the LQFP-100 land pattern, power and decoupling topology, clock stability, and exposed signal-routing clearances described by the manufacturer. Use the pin-description and alternate-function tables in the manufacturer datasheet when assigning ports, communication signals, analog inputs, and debug functions. Firmware migration is simplified within supported STM32L4 toolchains, but board-level peripheral assignments still require verification against the final schematic.
This page consolidates the principal device characteristics, package information, qualified drop-in alternatives, and practical design guidance into one engineering reference. It also identifies where detailed electrical limits or pin assignments must be confirmed in the official STM32L475xx datasheet before a production design is released.
এর জন্য ড্রপ-ইন বিকল্প STM32L475VCT6 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible STM32L475VCT6 (একই form factor এবং footprint) — পার্থক্য রয়েছে Flash Memory, Package, SRAM, USB, Performance.
STM32L476VCT6
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
STM32L476VET6
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
STM32L475VGT6
✅ ড্রপ-ইন✗ স্টকে নেই
$5.2 / ইউনিট
ডেটাশিট দেখুন →STM32L4S5VIT6
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →STM32F372VCT6
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
STM32L475VCT6 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | Ultra-low-power 32-bit microcontroller |
| Processor Core | Arm Cortex-M4 |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 80 MHz |
| Embedded Flash Memory | 256 KB (256K x 8) |
| Floating-Point Unit | Single precision |
| DSP Instruction Support | Supported |
| USB Interface | USB OTG |
| Digital Filter for Sigma-Delta Modulators | DFSDM |
| সাপ্লাই ভোল্টেজ | 3.3 V |
| Package Type | 100-lead LQFP |
| Package Dimensions | 14 x 14 mm |
| মাউন্টিং টাইপ | Surface mount |
| Shipping Format | Tray |
STM32L475VCT6 14 x 14 mm পিন কনফিগারেশন গাইড
STM32L475VCT6 (14 x 14 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি STM32L475VCT6.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
STM32L475VCT6 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Monitoring, USB Data Acquisition, Portable Medical Monitoring, Low-Power Sensor Node, DFSDM Precision Acquisition, Embedded Control System.
Industrial Sensor Monitoring
The STM32L475VCT6 fits industrial sensor nodes that require local filtering, configurable I/O, and efficient low-power operation. Its 80 MHz Arm Cortex-M4 core executes control and signal-conditioning routines, while the single-precision FPU and DSP instructions accelerate arithmetic-intensive filtering. The 256 KB embedded Flash holds application firmware and local parameters without requiring an external memory device. USB OTG can provide configuration, logging, or data transfer over a wired connection. Designers should confirm the required digital and analog inputs, communication peripherals, and operating-temperature range against the final sensor-node specification.
সুপারিশকৃত
USB Data Acquisition
The STM32L475VCT6 is appropriate for compact USB data-acquisition equipment that combines signal processing with a direct host interface. Its Cortex-M4 processor operates at up to 80 MHz and includes hardware support for single-precision floating-point and DSP instructions, reducing processing load for filters and calibration calculations. USB OTG simplifies a connected instrument architecture by supporting peripheral roles such as USB device. The 3.3 V supply and 256 KB Flash suit compact embedded instruments, while the 100-lead LQFP package provides access to the device’s I/O and peripheral resources. Validation should include signal bandwidth, USB suspend behavior, clock accuracy, and host compatibility.
সুপারিশকৃত
Portable Medical Monitoring
The STM32L475VCT6 can serve portable monitoring equipment that combines sensor acquisition, digital filtering, and a compact communications link. DFSDM is useful for interfacing suitable sigma-delta converters, while the Cortex-M4 FPU and DSP instructions support running filtering and signal analysis locally. The device’s 256 KB Flash provides room for firmware without an external memory component, and its low-power architecture is appropriate for battery-operated operation. A medical design must still address the required input accuracy, patient-safety isolation, regulatory validation, and operating-temperature limits. Use the DFSDM timing and analog front-end recommendations in the manufacturer documentation when constructing the acquisition chain.
সুপারিশকৃত
Low-Power Sensor Node
The STM32L475VCT6 suits low-power sensor nodes where processing capability, digital interfaces, and energy efficiency must coexist in one package. Its ultra-low-power STM32L4 architecture can handle sampling, thresholding, and local data preparation, while the 80 MHz Cortex-M4 core can handle more demanding control functions without moving them to a separate processor. USB OTG enables configuration or periodic data transfer where a wired interface is available, and DFSDM supports compatible low-rate high-resolution acquisition channels. The final power budget should be evaluated in each sleep, run, and communication mode because peripheral activity and leakage determine the achievable battery life.
সুপারিশকৃত
DFSDM Precision Acquisition
The STM32L475VCT6 is designed for systems that can use DFSDM to acquire signals from sigma-delta modulators. The peripheral performs digital filtering and decimation before transferring data to the processor, reducing the processing burden and potentially simplifying the analog signal chain. The 80 MHz Cortex-M4 core then handles calibration, interpretation, control, and communications, with single-precision floating-point and DSP instructions accelerating numerical operations. Because DFSDM channel timing, modulator characteristics, and digital-filter configuration determine accuracy, the source impedance and clocking must be designed according to the manufacturer’s application guidance. This architecture is especially relevant to compact precision measurement instruments.
সুপারিশকৃত
Embedded Control System
The STM32L475VCT6 fits embedded controllers that need deterministic real-time performance, digital I/O, communications, and moderate local program storage. Its Cortex-M4 architecture executes at up to 80 MHz and provides DSP and single-precision floating-point instructions for motor algorithms, filter calculations, or process-control loops. The 256 KB Flash supports a substantial application, and USB OTG can add service, logging, or configuration connectivity. The 100-lead LQFP package offers a broad pin count without requiring a fine-pitch BGA assembly. Designers should partition real-time tasks appropriately, verify peripheral interrupt priorities, and confirm that all required timer, serial, and analog resources are available for the target control topology.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা STM32L475VCT6 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | STM32L476VCT6 | STM32L476VET6 | STM32L475VGT6 | STM32L4S5VIT6 | STM32F372VCT6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 100-lead LQFP (14 x 14 mm) | 100-lead LQFP - same package | 100-lead LQFP - same package | 100-lead LQFP - same package | 100-lead LQFP - same package | 100-lead LQFP - same package |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Floating-Point Unit | Single precision | Single precision | Single precision | Single precision | Single precision | Single precision |
মূল পার্থক্যসমূহ
- Maintains the original 256 KB memory class in a closely related 100-LQFP replacement (বনামSTM32L476VCT6)
- Offers four times the Flash capacity without changing the LQFP-100 footprint (বনামSTM32L475VGT6)
- Combines 80 MHz Cortex-M4 processing with USB OTG and DFSDM (বনামSTM32F372VCT6)
ডিজাইন নোট
Assign all 100 LQFP lands using the package drawing and pin-description tables in the manufacturer datasheet. Keep USB differential routing short and geometry-controlled, provide the required series resistance and ESD protection, and avoid routing high-speed or switching signals beneath the device where avoidable. Because many pins are multiplexed, freeze the alternate-function assignment early and verify that PCB routing remains compatible with the selected peripheral instances.
Follow the STM32L475xx power-supply and decoupling recommendations, including the correct supply range, power sequencing, and capacitor placement. Place each required bypass capacitor close to its corresponding supply pin and use a low-impedance ground reference. USB transceiver, analog, and digital supply domains should be separated according to the datasheet layout guidance so switching noise and current transients do not degrade USB or DFSDM signal quality.
Do not treat package equivalence as automatic firmware equivalence. Before substituting an STM32L476, STM32L4S5, or STM32F372 device, compare the clock tree, interrupt vector table, bootloader, USB implementation, DFSDM channels, pin multiplexing, flash organization, and low-power modes. Re-run hardware validation for peripheral timing, USB enumeration, analog acquisition, brownout behavior, and production programming after any substitution.
Plan the external clock and DFSDM signal paths carefully. Keep clock routing short, return the reference ground continuously beneath the route, and keep noisy switching nodes away from high-impedance acquisition inputs. DFSDM performance depends on modulator timing and filter configuration as well as board layout, so validate the complete acquisition chain with the intended modulator rather than relying only on nominal MCU specifications.
The LQFP-100 package is suitable for conventional surface-mount assembly, but total self-heating depends on processor load, clock rate, supply voltage, ambient temperature, and copper area. For sustained maximum-frequency operation, provide a continuous ground plane and adequate copper around the package where layout rules allow. Estimate junction temperature using the package thermal data and board conditions, then verify it in the final enclosure and worst-case operating mode.
কমপ্লায়েন্স তথ্য
AEC-Q100 qualification is not applicable to this general-purpose microcontroller. Detailed environmental and material-compliance declarations should be confirmed with the manufacturer for the exact orderable part.