SY89295UMI - 1024-Tap Precision Delay Line | Microchip Technology
MPN: SY89295UMI ✓ সক্রিয়SY89295UMI সারাংশ
A programmable delay line is a timing integrated circuit that provides multiple evenly spaced delay taps along a signal path. By selecting one of the available taps, a designer can shift a digital signal by a controlled interval. In the system hierarchy, the SY89295UMI is a delay-line IC, a clock-and-timing component, and a semiconductor used for signal-delay management. It is particularly useful where one signal must be aligned with another without changing the clock source or redesigning the surrounding digital logic.
The defining feature of the SY89295UMI is its 1024-tap architecture. A large tap count provides fine-grained delay selection, while the 3.2 ns to 14.8 ns range supports precision timing adjustments. The 2.5 V and 3.3 V operating options make the device relevant to compact, high-speed electronic systems where controlled delay, compact packaging, and direct digital control are important design objectives.
From an architectural perspective, the part combines a programmable delay path, selectable output taps, and a small exposed-pad package. The exposed thermal pad supports heat transfer from the IC into the PCB, although final thermal performance depends on copper area, airflow, ambient temperature, and switching activity. The manufacturer datasheet remains the controlling reference for pin assignments, propagation-delay limits, input-output characteristics, control logic, and recommended application circuits.
Typical uses include clock-deskew circuits, data alignment, pulse-width timing, phase adjustment, synchronous-interface conditioning, and laboratory or communications equipment. In these applications, the delay line allows an engineer to compensate for unequal trace, connector, or component propagation delays. It can also create deliberate timing offsets for testing clock domains or synchronizing sampled data.
A critical design practice is to route the device as a high-speed, controlled-impedance network. Keep tap connections short, provide solid ground and power planes, and follow the manufacturer’s recommended decoupling and layout guidance. Because signal integrity, supply return current, and parasitic capacitance can affect edge behavior, PCB stack-up and component placement should be reviewed alongside the nominal delay range rather than treated as separate concerns.
This product record combines the exact 1024-tap and 3.2 ns to 14.8 ns timing characteristics, package information, family alternatives, application guidance, comparison parameters, and practical PCB design notes. It is intended to accelerate part identification, qualification, replacement assessment, and first-pass schematic planning for precision timing designs.
এর জন্য ড্রপ-ইন বিকল্প SY89295UMI — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible SY89295UMI (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Product Type, Supply Voltage Options.
SY89295UMI-TR
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
SY89295UMG
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →SY89295UTG
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →SY89296UMG
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →SY89297UMG
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →SY89295UMI বিশেষণ
| Product Type | Programmable delay-line integrated circuit |
| Number of Taps | 1024 taps |
| Minimum Available Total Delay | 3.2 ns |
| Maximum Available Total Delay | 14.8 ns |
| Supply Voltage Options | 2.5 V or 3.3 V |
| Signal Family | LVPECL |
| Maximum Operating Frequency | 1.5 GHz |
| প্যাকেজ | 32-VFQFN exposed pad, 32-MLF, 5 mm x 5 mm |
| মাউন্টিং টাইপ | Surface mount |
| Delay to First Tap | 3.2 ns |
SY89295UMI 32-vfqfn exposed pad, 32-mlf, 5 mm x 5 mm পিন কনফিগারেশন গাইড
SY89295UMI (32-vfqfn exposed pad, 32-mlf, 5 mm x 5 mm প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি SY89295UMI.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
SY89295UMI এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Clock Deskew and Alignment, Data-to-Clock Alignment, Pulse-Width Conditioning, Synchronous Communications Interface, Test and Measurement Timing, Semiconductor Test and Characterization.
Clock Deskew and Alignment
The SY89295UMI fits clock-deskew circuits because it offers 1024 taps spanning 3.2 ns to 14.8 ns. An engineer can select a tap to compensate for unequal clock propagation through PCB traces, connectors, or differing logic devices. The LVPECL implementation is appropriate when the design already uses 2.5 V or 3.3 V PECL clocking and requires deterministic, finely adjustable delay. Use the manufacturer control-interface timing when driving the tap-selection logic, and keep the delay output over controlled-impedance routing to preserve edge quality and minimize reflection.
সুপারিশকৃত
Data-to-Clock Alignment
The SY89295UMI can align a data event with a clock edge by introducing a controlled interval between the two paths. Its 1024 taps and 3.2 ns to 14.8 ns range are useful when component or trace delays leave a small timing margin that must be corrected. The device is best applied to LVPECL interfaces where signal levels and timing are compatible. Designers should budget the selected tap delay against the complete data path, including logic, connectors, and board routing, rather than treating the delay-line setting as the only propagation-time contribution.
সুপারিশকৃত
Pulse-Width Conditioning
The SY89295UMI can be used to condition pulse timing by placing a selectable delay between a pulse source and its receiving circuit. Its fine 1024-tap granularity helps produce smaller timing adjustments than a coarse RC delay network. For LVPECL systems operating from 2.5 V or 3.3 V, this provides a compact way to vary edge timing while retaining a dedicated delay function. Validate the input pulse width, output edge rate, and receiver setup-and-hold requirements because the nominal 3.2 ns to 14.8 ns range does not describe every timing tolerance or signal-quality limit.
সুপারিশকৃত
Synchronous Communications Interface
The SY89295UMI is suitable for communications equipment that needs a small, adjustable timing offset between high-speed LVPECL signals. Its 1024 taps and compact 32-VFQFN exposed-pad package support dense timing implementations, while the 3.2 ns to 14.8 ns span targets fine rather than long delay adjustments. In a communications design, the delay can compensate for skew introduced by different board regions or interface components. Controlled-impedance traces, short tap connections, and a continuous ground reference are essential for preserving signal integrity.
সুপারিশকৃত
Test and Measurement Timing
The SY89295UMI can provide a calibrated programmable offset in test and measurement systems where two events must be compared with controlled timing. The 1024 taps allow an instrument to explore small delay increments, and the 3.2 ns to 14.8 ns range is useful for synchronizing sampling boundaries or delay-line calibration. LVPECL operation suits high-speed backplane-style interconnections. For precise measurements, characterize the complete channel and temperature range rather than assuming that the programmed tap value alone defines absolute propagation time.
সুপারিশকৃত
Semiconductor Test and Characterization
The SY89295UMI can be inserted into a semiconductor test fixture to create a deliberate timing shift between a stimulus and a response. Its 1024 taps permit fine exploration of setup-and-hold margins, while the 3.2 ns to 14.8 ns range covers compact board-level timing offsets. The 5 mm by 5 mm 32-MLF package supports high-density test hardware, but exposed-pad layout and adequate grounding must follow the manufacturer drawing. Confirm pin-compatible operation, control timing, and electrical limits before reusing the fixture with a related family member.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা SY89295UMI — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | SY89295UMI-TR | SY89295UMG | SY89295UTG | SY89296UMG | SY89297UMG |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 32-VFQFN exposed pad, 32-MLF, 5 mm x 5 mm | 32-VFQFN exposed pad, 32-MLF | 32-VFQFN exposed pad, 32-MLF | 32-VFQFN exposed pad, 32-MLF | 32-VFQFN exposed pad, 32-MLF | 32-VFQFN exposed pad, 32-MLF |
মূল পার্থক্যসমূহ
- Fine-grained programmable adjustment (বনামSY89296UMG)
- Directly identified ordering-code match (বনামSY89295UMI-TR)
- Documented dual operating-voltage capability (বনামSY89295UMG)
ডিজাইন নোট
Treat the delay path as a controlled-impedance signal. Keep connections to the selected tap short, provide an uninterrupted ground reference, avoid stubs and test-pad discontinuities where possible, and route away from noisy power-converter nodes. The 3.2 ns to 14.8 ns range represents nominal available delay, so propagation stability also depends on trace geometry, return paths, loading, and the output state used in the design.
Follow the manufacturer’s supply and decoupling requirements for 2.5 V or 3.3 V operation. Place low-inductance bypass capacitance close to the supply and ground terminals, and provide a low-impedance ground plane so switching current does not add supply disturbance to the delayed signal. Account for the logic-compatible termination requirements of the surrounding LVPECL interface rather than assuming conventional single-ended termination applies unchanged.
The exposed pad is not only a mechanical feature; it is the primary thermal path from the die to the PCB. Follow the manufacturer land pattern for solder-mask and paste geometry and preserve as much uninterrupted copper as practical. Estimated junction temperature cannot be calculated without confirmed switching activity, ambient conditions, and board thermal data, so evaluate the exposed-pad temperature using the manufacturer’s thermal information and the actual assembly.
Do not substitute a family member solely because it has the same 32-MLF package. Verify tap count, delay range, control-code behavior, supply voltage, I/O levels, and ordering suffix against the target design. The UMI and UMI-TR listings explicitly match the 1024-tap, 3.2 ns to 14.8 ns configuration, whereas the published comparison pages for other family members do not quantify all of those electrical attributes.
কমপ্লায়েন্স তথ্য
Compliance status is not stated in the manufacturer-derived listing information. A comparison page mentions RoHS and REACH status, but it does not provide a definitive manufacturer declaration for the target.