Microchip Technology

SY89295UMI - 1024-Tap Precision Delay Line | Microchip Technology

Teilenummer: SY89295UMI ✓ Aktiv
2.5 V or 3.3 V Vdss 32-VFQFN exposed pad, 32-MLF, 5 mm x 5 mm Package 1.5 GHz Speed
MOQ: 1 |

SY89295UMI Übersicht

The Microchip Technology SY89295UMI is a programmable precision delay-line integrated circuit with 1024 taps, a selectable total-delay range of 3.2 ns to 14.8 ns, and operation from 2.5 V or 3.3 V. The device is housed in a 32-VFQFN exposed-pad package identified as the 5 mm by 5 mm 32-MLF package. Its principal function is to provide controlled propagation delay for clock, data, and pulse-alignment circuits.

A programmable delay line is a timing integrated circuit that provides multiple evenly spaced delay taps along a signal path. By selecting one of the available taps, a designer can shift a digital signal by a controlled interval. In the system hierarchy, the SY89295UMI is a delay-line IC, a clock-and-timing component, and a semiconductor used for signal-delay management. It is particularly useful where one signal must be aligned with another without changing the clock source or redesigning the surrounding digital logic.

The defining feature of the SY89295UMI is its 1024-tap architecture. A large tap count provides fine-grained delay selection, while the 3.2 ns to 14.8 ns range supports precision timing adjustments. The 2.5 V and 3.3 V operating options make the device relevant to compact, high-speed electronic systems where controlled delay, compact packaging, and direct digital control are important design objectives.

From an architectural perspective, the part combines a programmable delay path, selectable output taps, and a small exposed-pad package. The exposed thermal pad supports heat transfer from the IC into the PCB, although final thermal performance depends on copper area, airflow, ambient temperature, and switching activity. The manufacturer datasheet remains the controlling reference for pin assignments, propagation-delay limits, input-output characteristics, control logic, and recommended application circuits.

Typical uses include clock-deskew circuits, data alignment, pulse-width timing, phase adjustment, synchronous-interface conditioning, and laboratory or communications equipment. In these applications, the delay line allows an engineer to compensate for unequal trace, connector, or component propagation delays. It can also create deliberate timing offsets for testing clock domains or synchronizing sampled data.

A critical design practice is to route the device as a high-speed, controlled-impedance network. Keep tap connections short, provide solid ground and power planes, and follow the manufacturer’s recommended decoupling and layout guidance. Because signal integrity, supply return current, and parasitic capacitance can affect edge behavior, PCB stack-up and component placement should be reviewed alongside the nominal delay range rather than treated as separate concerns.

This product record combines the exact 1024-tap and 3.2 ns to 14.8 ns timing characteristics, package information, family alternatives, application guidance, comparison parameters, and practical PCB design notes. It is intended to accelerate part identification, qualification, replacement assessment, and first-pass schematic planning for precision timing designs.

Drop-in-Alternativen für SY89295UMI – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit SY89295UMI (gleiche Bauform und Footprint) – abweichend in Package, Product Type, Supply Voltage Options.

Microchip Technology
Package: 32-pin TQFP, 7 mm × 7 mm
Vergleichen mit SY89295UMI →
Microchip Technology
Package: 32-pin QFN, 5 mm x 5 mm
Product Type: Programmable delay line
Vergleichen mit SY89295UMI →
Microchip Technology
Package: 24-pin QFN with exposed pad
Product Type: Programmable dual-channel delay line IC
Supply Voltage Options: 2.5V or 3.3V
Vergleichen mit SY89295UMI →

SY89295UMI-TR

✅ Drop-In
📦 32-VFQFN exposed pad, 32-MLF, 5 mm x 5 mm
Same listed 1024 taps and 3.2 ns to 14.8 ns delay range, with 0% difference in those two timing attributes; ordering suffix differs.

📋 Referenzalternative (nicht im Katalog)

SY89295UMG

✅ Drop-In
Microchip Technology
📦 32-VFQFN exposed pad, 32-MLF, 5 mm x 5 mm
Programmable delay line IC · 1024 taps · 3.2 ns to 14.8 ns · 10 ps · 1.5 GHz · 2.5 V ±5% · 3.3 V ±10% · LVPECL

Preis auf Anfrage

Datenblatt ansehen →

SY89295UTG

✅ Drop-In
Microchip Technology
📦 32-VFQFN exposed pad, 32-MLF, 5 mm x 5 mm
Programmable LVPECL delay line · 1024 taps · 3.2 ns · 14.8 ns · 10 ps · LVPECL · 2.5 V ±5% · 3.3 V ±10%

Preis auf Anfrage

Datenblatt ansehen →

SY89296UMG

✅ Drop-In
Microchip Technology
📦 32-VFQFN exposed pad, 32-MLF, 5 mm x 5 mm
Programmable delay line · 3.2 ns to 14.8 ns · 1024 taps · 10 ps per tap · Approximately 40 ps · 2.5 V or 3.3 V · PECL · Digital control signal with voltage-based continuous adjustment

Preis auf Anfrage

Datenblatt ansehen →

SY89297UMG

✅ Drop-In
Microchip Technology
📦 32-VFQFN exposed pad, 32-MLF, 5 mm x 5 mm
Programmable dual-channel delay line IC · 2 independent channels · 3.2 Gbps per channel · 2.5V or 3.3V · 2 ns to 7 ns per channel · 5 ps · 5 ns · 1024 taps

Preis auf Anfrage

Datenblatt ansehen →

SY89295UMI Technische Daten

Product Type Programmable delay-line integrated circuit
Number of Taps 1024 taps
Minimum Available Total Delay 3.2 ns
Maximum Available Total Delay 14.8 ns
Supply Voltage Options 2.5 V or 3.3 V
Signal Family LVPECL
Maximum Operating Frequency 1.5 GHz
Gehäuse 32-VFQFN exposed pad, 32-MLF, 5 mm x 5 mm
Montageart Surface mount
Delay to First Tap 3.2 ns

SY89295UMI 32-vfqfn exposed pad, 32-mlf, 5 mm x 5 mm Pinbelegungsleitfaden

Pinbelegung für SY89295UMI (32-vfqfn exposed pad, 32-mlf, 5 mm x 5 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für SY89295UMI im 32-vfqfn exposed pad, 32-mlf, 5 mm x 5 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für SY89295UMI.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

SY89295UMI ist geeignet für 6 Anwendungs: Clock Deskew and Alignment, Data-to-Clock Alignment, Pulse-Width Conditioning, Synchronous Communications Interface, Test and Measurement Timing, Semiconductor Test and Characterization.

🌐

Clock Deskew and Alignment

The SY89295UMI fits clock-deskew circuits because it offers 1024 taps spanning 3.2 ns to 14.8 ns. An engineer can select a tap to compensate for unequal clock propagation through PCB traces, connectors, or differing logic devices. The LVPECL implementation is appropriate when the design already uses 2.5 V or 3.3 V PECL clocking and requires deterministic, finely adjustable delay. Use the manufacturer control-interface timing when driving the tap-selection logic, and keep the delay output over controlled-impedance routing to preserve edge quality and minimize reflection.

🖥️

Data-to-Clock Alignment

The SY89295UMI can align a data event with a clock edge by introducing a controlled interval between the two paths. Its 1024 taps and 3.2 ns to 14.8 ns range are useful when component or trace delays leave a small timing margin that must be corrected. The device is best applied to LVPECL interfaces where signal levels and timing are compatible. Designers should budget the selected tap delay against the complete data path, including logic, connectors, and board routing, rather than treating the delay-line setting as the only propagation-time contribution.

⚡

Pulse-Width Conditioning

The SY89295UMI can be used to condition pulse timing by placing a selectable delay between a pulse source and its receiving circuit. Its fine 1024-tap granularity helps produce smaller timing adjustments than a coarse RC delay network. For LVPECL systems operating from 2.5 V or 3.3 V, this provides a compact way to vary edge timing while retaining a dedicated delay function. Validate the input pulse width, output edge rate, and receiver setup-and-hold requirements because the nominal 3.2 ns to 14.8 ns range does not describe every timing tolerance or signal-quality limit.

🌐

Synchronous Communications Interface

The SY89295UMI is suitable for communications equipment that needs a small, adjustable timing offset between high-speed LVPECL signals. Its 1024 taps and compact 32-VFQFN exposed-pad package support dense timing implementations, while the 3.2 ns to 14.8 ns span targets fine rather than long delay adjustments. In a communications design, the delay can compensate for skew introduced by different board regions or interface components. Controlled-impedance traces, short tap connections, and a continuous ground reference are essential for preserving signal integrity.

🔧

Test and Measurement Timing

The SY89295UMI can provide a calibrated programmable offset in test and measurement systems where two events must be compared with controlled timing. The 1024 taps allow an instrument to explore small delay increments, and the 3.2 ns to 14.8 ns range is useful for synchronizing sampling boundaries or delay-line calibration. LVPECL operation suits high-speed backplane-style interconnections. For precise measurements, characterize the complete channel and temperature range rather than assuming that the programmed tap value alone defines absolute propagation time.

🏭

Semiconductor Test and Characterization

The SY89295UMI can be inserted into a semiconductor test fixture to create a deliberate timing shift between a stimulus and a response. Its 1024 taps permit fine exploration of setup-and-hold margins, while the 3.2 ns to 14.8 ns range covers compact board-level timing offsets. The 5 mm by 5 mm 32-MLF package supports high-density test hardware, but exposed-pad layout and adequate grounding must follow the manufacturer drawing. Confirm pin-compatible operation, control timing, and electrical limits before reusing the fixture with a related family member.

What is the SY89295UMI?
The SY89295UMI is a programmable precision LVPECL delay-line integrated circuit with 1024 taps and an available total-delay range of 3.2 ns to 14.8 ns. According to the Micrel manufacturer datasheet, it operates from 2.5 V or 3.3 V and is intended for clock, data, and pulse-timing applications. It is packaged in a 32-VFQFN exposed-pad configuration, also described as a 5 mm by 5 mm 32-MLF package.
How many taps does the SY89295UMI provide?
The SY89295UMI provides 1024 selectable taps. According to the Micrel manufacturer datasheet, this high tap count supports fine delay adjustment within the device’s 3.2 ns to 14.8 ns total-delay range. Engineers use the tap structure when clock or data paths require small, incremental timing adjustments that cannot be obtained reliably through software or ordinary propagation-delay compensation.
What is the delay range of SY89295UMI?
The SY89295UMI supports total delays from 3.2 ns to 14.8 ns, with the delay to the first tap listed as 3.2 ns. According to the Micrel manufacturer datasheet, the device is a programmable 1024-tap LVPECL delay line. Exact tap-delay tolerances, control-code mapping, and operating-condition limits should be taken from the timing table and electrical-characteristics section of the manufacturer datasheet.
What voltage does the SY89295UMI operate at?
The SY89295UMI operates from either 2.5 V or 3.3 V. According to the Micrel manufacturer datasheet, it is a precision LVPECL programmable delay line with 1024 taps. This voltage range supports systems built around compact, high-speed logic, although the designer must observe the supply sequencing, decoupling, termination, and input-output level requirements specified for the selected operating condition.
What package does the SY89295UMI use?
The SY89295UMI uses a 32-VFQFN exposed-pad package, identified as a 32-MLF package measuring 5 mm by 5 mm. The Micrel manufacturer datasheet describes the package as surface mount. Its exposed pad provides a thermal and electrical connection to the PCB, so the land pattern, paste layout, solder mask, and copper thermal area should follow the package drawing exactly.
Where can I download the SY89295UMI datasheet PDF?
The SY89295UMI datasheet is available through the Micrel document linked on the product’s datasheet page, and a manufacturer-derived PDF index is also accessible from the document listing. The datasheet covers the 1024-tap architecture, 3.2 ns to 14.8 ns delay range, LVPECL characteristics, and the 32-VFQFN exposed-pad package. Use the PDF’s pin-description and electrical-characteristics tables when releasing a PCB or selecting operating limits.
Where can I find the SY89295UMI pinout?
The SY89295UMI pinout is located in the pin-description table and package drawing in the Micrel manufacturer datasheet. The device uses a 32-VFQFN exposed-pad package, so the 32 perimeter pins and exposed thermal pad must be distinguished during schematic capture and layout. Use the datasheet’s terminal numbering and power and ground assignments rather than inferring connections from another member of the SY89295 family.
What can replace SY89295UMI?
The closest identified drop-in-family options are SY89295UMI-TR, SY89295UMG, SY89295UTG, SY89296UMG, and SY89297UMG, but each must be checked against the required tap count, delay range, control interface, and ordering code before substitution. The SY89295UMI-TR listing explicitly identifies the same 1024-tap, 3.2 ns to 14.8 ns delay-line configuration in a 32-VFQFN exposed-pad package.
Is SY89295UMI the same as SY89295UMI-TR?
SY89295UMI and SY89295UMI-TR are the same 1024-tap, 3.2 ns to 14.8 ns programmable delay line in a 32-VFQFN exposed-pad package according to their product listings. The difference is the manufacturer ordering suffix, which can encode a distinct shipping or packaging format. Confirm the reel, cut-tape, or other delivery format required by production before treating the two order codes as interchangeable.
What is the best Microchip Technology equivalent for SY89295UMI?
The best directly identified Microchip Technology equivalent is SY89295UMI-TR because its listing states the same 1024 taps, 3.2 ns to 14.8 ns delay range, and 32-VFQFN exposed-pad package. SY89295UMG and SY89295UTG are additional family candidates, while SY89296UMG and SY89297UMG require comparison of their delay ranges and control interfaces. No separate cross-brand drop-in device is confirmed.
SY89295UMI vs SY89295UMG: which should be selected?
Choose SY89295UMI when the exact 1024-tap, 3.2 ns to 14.8 ns configuration and ordering format are required; choose SY89295UMG only after confirming its electrical characteristics and ordering options match. Both belong to the Microchip Technology SY89295 family, and the product data identifies UMG as a 2.5 V or 3.3 V PECL delay line. The final decision should be based on delay range, tap count, package, and supply code.
When should I choose the SY89295UMI over another delay-line IC?
Choose the SY89295UMI when a design needs fine timing adjustment from a 1024-tap programmable delay path covering 3.2 ns to 14.8 ns at 2.5 V or 3.3 V. It is particularly appropriate for LVPECL clock and data-alignment circuits where a compact 32-VFQFN package and dedicated delay function simplify implementation. Select another device when its voltage, logic family, tap count, or delay span better matches the system.
Is SY89295UMI suitable for clock and data alignment?
Yes, the SY89295UMI is suitable for clock and data alignment because it provides 1024 programmable taps across a 3.2 ns to 14.8 ns delay range. According to the Micrel manufacturer datasheet, the device is a precision LVPECL delay line. Its usefulness depends on implementing the specified logic levels, termination, control interface, and controlled-impedance routing correctly.
Where can I buy SY89295UMI online?
Use the Request a Quote form on this page to request availability, lead time, and an order quote for the exact SY89295UMI ordering code. The device is identified as a Microchip Technology 1024-tap, 3.2 ns to 14.8 ns LVPECL delay line in a 32-VFQFN exposed-pad package. Include your required delivery format, annual usage, and target date so the sourcing response reflects the actual production need.
What is the price and lead time of SY89295UMI?
Submit the SY89295UMI request through the Request a Quote form on this page for current pricing, stock confirmation, minimum order quantity, and lead time. The listing confirms the exact 1024-tap, 3.2 ns to 14.8 ns device in a 32-VFQFN exposed-pad package, but it does not provide a qualifying quantity-break price table. The quote form is the appropriate route for current commercial terms.

Technische Referenzdaten für SY89295UMI – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the SY89295UMI when a design requires a dedicated LVPECL programmable delay line with 1024 taps, a 3.2 ns to 14.8 ns nominal total-delay range, and a compact 32-VFQFN exposed-pad package. It is a strong fit for fine clock deskew, data alignment, pulse conditioning, and test-fixture timing where the system operates at 2.5 V or 3.3 V. Select SY89295UMI-TR when that exact electrical configuration is required but the production ordering or delivery format calls for the -TR suffix. Consider SY89295UMG or SY89295UTG only after confirming the delay range, tap count, control interface, and exact package. Treat SY89296UMG and SY89297UMG as comparison candidates rather than automatic substitutions because their published comparison data does not establish equivalent timing parameters. No cross-brand drop-in replacement is confirmed.

Vergleich mit Alternativen

Parameter Dieses Produkt SY89295UMI-TR SY89295UMG SY89295UTG SY89296UMG SY89297UMG
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 32-VFQFN exposed pad, 32-MLF, 5 mm x 5 mm 32-VFQFN exposed pad, 32-MLF 32-VFQFN exposed pad, 32-MLF 32-VFQFN exposed pad, 32-MLF 32-VFQFN exposed pad, 32-MLF 32-VFQFN exposed pad, 32-MLF

Wichtigste Unterscheidungsmerkmale

  • Fine-grained programmable adjustment (vs. SY89296UMG)
  • Directly identified ordering-code match (vs. SY89295UMI-TR)
  • Documented dual operating-voltage capability (vs. SY89295UMG)

Designhinweise

Treat the delay path as a controlled-impedance signal. Keep connections to the selected tap short, provide an uninterrupted ground reference, avoid stubs and test-pad discontinuities where possible, and route away from noisy power-converter nodes. The 3.2 ns to 14.8 ns range represents nominal available delay, so propagation stability also depends on trace geometry, return paths, loading, and the output state used in the design.

Follow the manufacturer’s supply and decoupling requirements for 2.5 V or 3.3 V operation. Place low-inductance bypass capacitance close to the supply and ground terminals, and provide a low-impedance ground plane so switching current does not add supply disturbance to the delayed signal. Account for the logic-compatible termination requirements of the surrounding LVPECL interface rather than assuming conventional single-ended termination applies unchanged.

The exposed pad is not only a mechanical feature; it is the primary thermal path from the die to the PCB. Follow the manufacturer land pattern for solder-mask and paste geometry and preserve as much uninterrupted copper as practical. Estimated junction temperature cannot be calculated without confirmed switching activity, ambient conditions, and board thermal data, so evaluate the exposed-pad temperature using the manufacturer’s thermal information and the actual assembly.

Do not substitute a family member solely because it has the same 32-MLF package. Verify tap count, delay range, control-code behavior, supply voltage, I/O levels, and ordering suffix against the target design. The UMI and UMI-TR listings explicitly match the 1024-tap, 3.2 ns to 14.8 ns configuration, whereas the published comparison pages for other family members do not quantify all of those electrical attributes.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Compliance status is not stated in the manufacturer-derived listing information. A comparison page mentions RoHS and REACH status, but it does not provide a definitive manufacturer declaration for the target.

Ähnliche Suchanfragen

SY89295UMI datasheet SY89295UMI pinout SY89295UMI datasheet pdf SY89295UMI specifications SY89295UMI equivalent SY89295UMI replacement SY89295UMI price SY89295UMI stock Microchip Technology SY89295UMI SY89295 1024 tap delay line SY89295UMI 32-VFQFN SY89295UMI vs SY89295UMG

Verwandte Bauteile & Begriffe

Microchip Technology Micrel SY89295UMI SY89295UMI-TR SY89295UMG SY89295UTG SY89296UMG SY89297UMG programmable delay line delay-line IC clock and timing IC semiconductor LVPECL precision timing 1024 taps 3.2 ns to 14.8 ns 2.5 V 3.3 V clock deskew data alignment pulse conditioning 32-VFQFN 32-MLF exposed pad controlled-impedance routing
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen