Microchip Technology

SY89825UHI - 2 GHz 1:22 LVPECL Clock Driver | Microchip

MPN: SY89825UHI ✓ সক্রিয়
2.5 V or 3.3 V Vdss 64-pin TQFP with exposed pad Package 2 GHz Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

SY89825UHI সারাংশ

The Microchip Technology SY89825UHI is a high-performance, low-voltage PECL bus clock driver and translator with 2:1 multiplexed inputs, 22 LVPECL outputs, a maximum operating frequency of 2 GHz, and a 64-pin TQFP exposed-pad package. It operates from a 2.5 V or 3.3 V supply and accepts LVDS or LVPECL clock inputs while providing LVPECL outputs.

A clock fanout buffer, also called a clock distribution or fanout driver, distributes one high-speed clock signal to multiple loads. This architecture reduces loading, isolates the source from downstream receiver loading, and helps maintain consistent clock timing across a multi-drop bus. The SY89825UHI combines this distribution function with input translation and a 2:1 multiplexer, allowing one device to select between two incoming clock sources.

The device provides a 1:22 fanout ratio, with two selectable inputs feeding 22 LVPECL outputs. Its maximum frequency is 2 GHz, making it suitable for telecommunications, networking, industrial control, test equipment, and high-speed digital systems. Internal input termination supports practical board-level use of LVDS or LVPECL sources without requiring a separate termination network on every input.

Timing performance is a key benefit of the SY89825U family. The manufacturer datasheet specifies a maximum pin-to-pin skew of 35 ps, helping preserve timing margin across the large number of distributed outputs. Combining a multiplexer, level translator, and fanout driver in one package reduces component count and can simplify board partitioning compared with a discrete arrangement of buffers, translators, and routing.

Typical clock-tree uses include backplane clock distribution, telecommunications line-card clocking, network-interface timing, industrial data-acquisition systems, and test-and-measurement platforms. The 64-pin TQFP exposed-pad package provides many output connections in a single device, although its size and pin count make careful fanout routing essential.

PCB implementation should preserve controlled-impedance routing, provide a continuous ground reference beneath the clock traces, and decouple the 2.5 V or 3.3 V supply close to the device. The exposed pad requires the layout and assembly recommendations in the manufacturer datasheet, including appropriate thermal-via and copper treatment, to avoid a junction-temperature rise during sustained high-frequency operation.

This product page combines the principal SY89825UHI electrical characteristics, package information, verified drop-in relationship, and application-oriented design guidance. It is intended to help engineers evaluate the 2 GHz, 1:22 architecture and plan a complete LVPECL clock tree before releasing a PCB layout.

এর জন্য ড্রপ-ইন বিকল্প SY89825UHI — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

SY89825UHY

✅ ড্রপ-ইন
📦 64-pin TQFP exposed pad
Ordering suffix differs by 0 percentage points in the verified key parameters; package, terminals, 2 GHz frequency, 1:22 fanout, and principal performance characteristics remain consistent.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

SY89825UHI বিশেষণ

Product Type PECL bus clock driver and translator
Manufacturer Microchip Technology
Maximum Frequency 2 GHz
Fanout Ratio 1:22
Number of Inputs 2
আউটপুটের সংখ্যা 22 LVPECL outputs
Multiplexer Ratio 2:1
Input Logic Levels LVDS and LVPECL
Output Logic Level LVPECL
সাপ্লাই ভোল্টেজ 2.5 V or 3.3 V
Maximum Pin-to-Pin Skew 35 ps
Input Termination Internal termination
প্যাকেজ 64-pin TQFP with exposed pad
মাউন্টিং টাইপ Surface mount

SY89825UHI 64-pin tqfp with exposed pad পিন কনফিগারেশন গাইড

SY89825UHI (64-pin tqfp with exposed pad প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

SY89825UHI-এর জন্য 64-pin tqfp with exposed pad প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি SY89825UHI.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

SY89825UHI এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Telecommunications Backplane Clock Distribution, Network Interface Clock Trees, Industrial Data Acquisition Systems, Test and Measurement Instrumentation, High-Speed Digital System Clocking, Clock Redundancy and Source Selection.

🌐

Telecommunications Backplane Clock Distribution

The SY89825UHI is suited to distributing a selected backplane clock across up to 22 receiving circuits. Its 2:1 input multiplexer can combine normal operation with a second clock source, while the 1:22 fanout reduces the number of separate clock buffers required. Operating up to 2 GHz and limiting pin-to-pin skew to 35 ps helps preserve timing margin across the distributed network. The LVPECL outputs suit high-speed backplane logic, while internal input termination simplifies LVDS or LVPECL source connections. Routing must retain controlled impedance and a continuous ground reference to minimize reflections and maintain timing consistency.

🌐

Network Interface Clock Trees

Use the SY89825UHI when several network-interface or line-card circuits require a locally distributed reference clock. Twenty-two LVPECL outputs can feed multiple endpoint devices without requiring a separate fanout stage for every branch. The integrated 2:1 multiplexer supports source selection or test-clock injection, and the 35 ps maximum pin-to-pin skew helps retain alignment across receivers operating at frequencies up to 2 GHz. Careful output ordering and matched routing lengths are essential because package and board propagation delays can add to device skew. The 64-pin TQFP exposed-pad package also requires adequate thermal and decoupling treatment.

🏭

Industrial Data Acquisition Systems

The SY89825UHI can distribute a common sampling or trigger clock to multiple converters, counters, and field-programmable logic sections in an industrial acquisition system. Its 2 GHz maximum frequency preserves headroom for fast data paths, while the 1:22 fanout supports a broad internal clock tree. The two-input multiplexer allows a system clock and an alternate calibration or test clock to share the same distribution network. Differential LVPECL outputs improve noise immunity over long interconnects when routing is controlled. Designers should validate receiver thresholds, trace impedance, connector transitions, and clock-return paths across the complete board rather than treating the fanout stage as an isolated component.

🖥️

Test and Measurement Instrumentation

A multi-channel oscilloscope, signal analyzer, or automated test platform can use the SY89825UHI as a centralized clock distributor. The 22 LVPECL outputs can provide phase-consistent sampling clocks to acquisition or processing channels, while the 2:1 multiplexer permits selection between an internal reference and an external trigger-derived source. A maximum frequency of 2 GHz supports demanding test architectures, and the 35 ps maximum pin-to-pin skew limits channel-to-channel timing spread. For instrumentation-grade performance, use symmetric routing, minimize layer transitions, provide local supply bypassing, and treat exposed-pad thermal management as part of the clock-tree design.

🔧

High-Speed Digital System Clocking

The SY89825UHI fits centralized clocking for processors, programmable logic, serializers, and high-speed interface controllers that must share a coherent reference. Its integrated translation function accepts LVDS or LVPECL sources and produces a consistent LVPECL clock tree, while the 1:22 ratio supports broad distribution without building a multi-stage buffer tree. Maximum frequency of 2 GHz and 35 ps maximum pin-to-pin skew help preserve high-speed timing margins. Because all 22 outputs share one device, thermal and process variation affect the entire tree, making load balance, output enable strategy, and systematic deskew important system-level considerations.

⚡

Clock Redundancy and Source Selection

The SY89825UHI can simplify clock-redundancy schemes by multiplexing two incoming clock sources before distributing the selected signal through 22 LVPECL outputs. One input can carry the primary operating clock while the other supplies a backup, test, or calibration source, allowing switching logic upstream to select the appropriate path. The device operates at 2.5 V or 3.3 V and supports LVDS or LVPECL inputs, which helps accommodate different source domains. Source-switch timing, glitch behavior, input termination, and receiver tolerances should be verified in system-level simulations before relying on the mux for uninterrupted production testing or redundant operation.

What is the SY89825UHI clock fanout ratio and maximum frequency?
The SY89825UHI provides a 1:22 clock fanout ratio and supports frequencies up to 2 GHz. According to the Microchip Technology SY89825U datasheet, the device includes two multiplexed clock inputs and 22 LVPECL outputs in a 64-pin TQFP exposed-pad package. This combination makes it suitable for distributing a selected high-speed clock across multiple loads while limiting timing degradation between output channels.
Where can I download the SY89825UHI datasheet PDF?
The official SY89825UHI datasheet PDF is available from Microchip Technology at https://ww1.microchip.com/downloads/en/DeviceDoc/sy89825u.pdf. The document covers the 2.5 V and 3.3 V operating modes, LVDS and LVPECL inputs, LVPECL outputs, the 2:1 input multiplexer, internal termination, timing characteristics, and package details. Use the pin-description and recommended-layout sections when assigning connections and constructing the PCB footprint.
What is the difference between LVPECL and LVDS on the SY89825UHI?
The SY89825UHI accepts LVDS or LVPECL clock inputs and translates them into LVPECL outputs, according to the manufacturer datasheet. LVPECL and LVDS use different signal amplitudes, common-mode characteristics, and termination arrangements, so the input configuration must match the upstream clock source. The device supports operation from 2.5 V or 3.3 V, while its internal termination simplifies implementation of the selected input interface.
What are the key specifications of SY89825UHI that engineers should know?
The principal SY89825UHI specifications are 2 GHz maximum frequency, 1:22 fanout, two selectable inputs, 22 LVPECL outputs, 2.5 V or 3.3 V operation, and no more than 35 ps pin-to-pin skew. Microchip Technology describes the device as a high-performance, low-voltage PECL bus clock driver and translator with a 2:1 multiplexer and internal input termination in a 64-pin TQFP exposed-pad package.
Where can I find the SY89825UHI pinout and package drawing?
The SY89825UHI pinout and mechanical drawing are in the official Microchip Technology SY89825U datasheet. The package is a 64-pin TQFP with an exposed pad, and the datasheet pin-description table should be used to verify every supply, ground, control, input, and output connection before routing the PCB. The exposed-pad layout and thermal-via requirements are also defined in the package information.
How much pin-to-pin skew does the SY89825UHI have?
The SY89825UHI has a maximum pin-to-pin skew of 35 ps. According to the manufacturer datasheet, this low skew is a major reason for using the device when a single clock must feed 22 outputs. The figure characterizes output-to-output timing variation, helping engineers assess setup and hold-time margins across the distributed clock network rather than treating all output channels as perfectly simultaneous.
Can the SY89825UHI select between two clock sources?
Yes. The SY89825UHI contains a 2:1 multiplexer for its two clock inputs, with the selected source distributed to 22 LVPECL outputs. According to the Microchip Technology SY89825U datasheet, the device supports 2.5 V or 3.3 V operation and accepts LVDS or LVPECL inputs. This allows clock redundancy, test-clock injection, or source selection to be implemented in one clock-distribution component.
What can replace the SY89825UHI in an existing design?
The SY89825UHY is a verified drop-in replacement for the SY89825UHI because both use the same 64-pin TQFP exposed-pad package and maintain consistent terminals, package, and principal performance characteristics. The comparison source identifies the SY89825UHY as completely replaceable without PCB changes. Confirm the ordering suffix, temperature grade, and production requirements against the manufacturer datasheet before releasing the substitution.
Is SY89825UHI the same as SY89825UHY?
The SY89825UHI and SY89825UHY are pin-compatible 64-pin TQFP clock-driver variants, and the verified cross-reference describes the SY89825UHY as a complete replacement for the SY89825UHI. Their principal performance characteristics and terminals are consistent, so an existing board can use the alternate ordering code without a footprint change. Verify ordering, grade, and lifecycle requirements before production release.
When should I choose the SY89825UHI instead of a discrete clock tree?
Choose the SY89825UHI when a design needs two selectable input clocks, translation to LVPECL, and distribution to 22 outputs at up to 2 GHz. Its integrated 1:22 fanout and 35 ps maximum pin-to-pin skew can reduce the number of separate buffers and routing stages. A discrete clock tree may be preferable when output count is much lower, source selection is unnecessary, or the board cannot accommodate a 64-pin TQFP footprint.
Is the SY89825UHI suitable for a telecom backplane clock tree?
The SY89825UHI is well suited to a telecom backplane clock tree requiring a 1:22 fanout and operation up to 2 GHz. Its 22 LVPECL outputs, low 35 ps maximum pin-to-pin skew, internal input termination, and 2:1 source multiplexing support high-speed backplane timing. Controlled-impedance routing, continuous reference planes, and careful output fanout remain essential to preserve signal integrity.
How should power and ground be connected on a SY89825UHI PCB?
Place the required 2.5 V or 3.3 V bypass capacitors close to the device supply pins and connect the exposed pad using the thermal-via and copper recommendations in the manufacturer datasheet. Every ground connection should tie to a continuous ground plane, and clock outputs should use controlled-impedance routing. These steps reduce supply-induced jitter, limit return-path discontinuities, and improve thermal performance during sustained 2 GHz operation.
Where can I buy SY89825UHI and what is its current price?
Use the Request a Quote form on this page to request current SY89825UHI availability, price, lead time, and order quantity through XAIPART. The 64-pin TQFP exposed-pad ordering code should be quoted exactly as SY89825UHI so the supplier can confirm the correct grade and package. Current commercial terms should be confirmed at quotation time because availability and lead time can change.
What is the lead time for SY89825UHI?
Request the current SY89825UHI lead time through the Request a Quote form on this page. Quote the exact MPN SY89825UHI and state the required quantity, delivery location, and target date. A distributor listing may show immediate-ship wording for some orders, but a project-specific lead-time commitment should be obtained before the component is committed to a production schedule.
Is the SY89825UHI currently in stock?
Current stock for SY89825UHI should be confirmed through the Request a Quote form on this page. Submit the exact MPN, required quantity, and target shipment date so the order can be checked against current inventory and incoming supply. The 64-pin TQFP exposed-pad package and exact ordering suffix must be preserved when requesting availability for production quantities.
What Microchip component is the closest drop-in equivalent to SY89825UHI?
The closest verified Microchip Technology equivalent is the SY89825UHY. The cross-reference describes it as a complete replacement with consistent terminals, package, and performance characteristics, allowing use without modifying an existing PCB. Both parts use the 64-pin TQFP exposed-pad package and provide the same 2 GHz, 1:22 clock-driver architecture. Review ordering-suffix and qualification requirements before substitution.
How does the SY89825UHI compare with the SY89825UHY?
The SY89825UHI and SY89825UHY share the same 64-pin TQFP exposed-pad footprint and are described as completely replaceable, with consistent terminals and principal performance characteristics. Their verified functional match supports a 100% parameter match for the published architecture. The ordering suffix remains important for procurement and qualification records even when the PCB footprint is unchanged.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা SY89825UHI — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the SY89825UHI for a high-speed design that needs two selectable input clocks, LVDS or LVPECL input translation, and distribution to 22 LVPECL loads at up to 2 GHz. It is particularly attractive when low pin-to-pin skew and a single-package clock tree are more important than minimizing package count. The SY89825UHY is the preferred verified alternative when it meets the procurement and qualification requirements because it uses the same 64-pin TQFP footprint and retains the same principal characteristics without PCB changes. A discrete multiplexer and fanout array may be more appropriate for designs requiring fewer than 22 outputs, different logic families, or independently programmable output channels. Before choosing either ordering suffix, verify supply requirements, operating temperature, output timing, and exposed-pad layout against the manufacturer datasheet.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য SY89825UHY
Brand Microchip Technology Microchip Technology
Package 64-pin TQFP exposed pad 64-pin TQFP exposed pad
Maximum Frequency 2 GHz 2 GHz
Fanout Ratio 1:22 1:22
Input Configuration 2 inputs with 2:1 multiplexing 2 inputs with 2:1 multiplexing
Input Logic Levels LVDS and LVPECL LVDS and LVPECL
Output Logic Level LVPECL LVPECL
Supply Voltage 2.5 V or 3.3 V 2.5 V or 3.3 V
Maximum Pin-to-Pin Skew 35 ps 35 ps
Internal Input Termination Yes Yes

মূল পার্থক্যসমূহ

  • Integrated high-ratio clock fanout (বনামSY89825UHY)
  • Integrated 2:1 clock multiplexing (বনামSY89825UHY)
  • Low output skew (বনামSY89825UHY)
  • Broad interface integration (বনামSY89825UHY)

ডিজাইন নোট

Route every LVPECL output as a controlled-impedance differential pair over a continuous ground plane. Avoid plane changes, long stubs, and unnecessary test pads on clock nets, because transitions and stubs can create reflections that degrade the sub-35 ps output-skew relationship. Keep the clock source, multiplexer section, and output fanout on a predictable layer structure, and match output and input interface geometry where board constraints permit.

Decouple the 2.5 V or 3.3 V supply close to the SY89825UHI pins using the capacitance and placement required by the manufacturer datasheet. Connect the exposed pad through multiple thermal vias and adequate copper area, following the package guidance. Differential clock outputs can draw rapidly changing current, so a compact supply-and-return connection helps prevent supply noise from modulating the 2 GHz clock edge.

Do not assume that a pin-compatible alternative has identical ordering, qualification, or production attributes. The SY89825UHY is verified as a drop-in replacement, but the exact suffix should still be checked against temperature-grade and purchasing requirements. Also confirm that upstream LVDS or LVPECL levels match the selected input configuration and that internal termination is appropriate for the board-level source arrangement.

Treat all 22 outputs as a coordinated clock tree rather than independent nets. Preserve consistent spacing and reference geometry, and verify channel-to-channel timing at the receivers because device skew combines with PCB propagation mismatch and receiver variation. If a system switches between the two multiplexed inputs, characterize source-switch glitches and output settling before using the multiplexer for operational redundancy.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact ordering code.

ডেটা যাচাই করা হয়েছে: 2026-11-10 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

SY89825UHI datasheet SY89825UHI datasheet pdf SY89825UHI pinout SY89825UHI specifications Microchip SY89825UHI SY89825UHI 2 GHz clock driver SY89825UHI 1:22 fanout SY89825UHI LVPECL outputs SY89825UHI 64 TQFP pinout SY89825UHI telecom clock tree SY89825UHI vs SY89825UHY SY89825UHI replacement SY89825UHI cross reference SY89825UHI price SY89825UHI stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology SY89825UHI SY89825UHY clock fanout buffer clock distribution IC bus clock driver clock translator 2:1 multiplexer LVPECL LVDS PECL ClockWorks 2 GHz maximum frequency 1:22 fanout ratio 35 ps maximum pin-to-pin skew internal input termination 64-pin TQFP TQFP exposed pad surface mount package semiconductor telecommunications backplane network interface industrial data acquisition test and measurement high-speed digital clock tree
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন