SY89825UHI - 2 GHz 1:22 LVPECL Clock Driver | Microchip
N.º de pieza: SY89825UHI ✓ ActivoSY89825UHI Descripción general
A clock fanout buffer, also called a clock distribution or fanout driver, distributes one high-speed clock signal to multiple loads. This architecture reduces loading, isolates the source from downstream receiver loading, and helps maintain consistent clock timing across a multi-drop bus. The SY89825UHI combines this distribution function with input translation and a 2:1 multiplexer, allowing one device to select between two incoming clock sources.
The device provides a 1:22 fanout ratio, with two selectable inputs feeding 22 LVPECL outputs. Its maximum frequency is 2 GHz, making it suitable for telecommunications, networking, industrial control, test equipment, and high-speed digital systems. Internal input termination supports practical board-level use of LVDS or LVPECL sources without requiring a separate termination network on every input.
Timing performance is a key benefit of the SY89825U family. The manufacturer datasheet specifies a maximum pin-to-pin skew of 35 ps, helping preserve timing margin across the large number of distributed outputs. Combining a multiplexer, level translator, and fanout driver in one package reduces component count and can simplify board partitioning compared with a discrete arrangement of buffers, translators, and routing.
Typical clock-tree uses include backplane clock distribution, telecommunications line-card clocking, network-interface timing, industrial data-acquisition systems, and test-and-measurement platforms. The 64-pin TQFP exposed-pad package provides many output connections in a single device, although its size and pin count make careful fanout routing essential.
PCB implementation should preserve controlled-impedance routing, provide a continuous ground reference beneath the clock traces, and decouple the 2.5 V or 3.3 V supply close to the device. The exposed pad requires the layout and assembly recommendations in the manufacturer datasheet, including appropriate thermal-via and copper treatment, to avoid a junction-temperature rise during sustained high-frequency operation.
This product page combines the principal SY89825UHI electrical characteristics, package information, verified drop-in relationship, and application-oriented design guidance. It is intended to help engineers evaluate the 2 GHz, 1:22 architecture and plan a complete LVPECL clock tree before releasing a PCB layout.
Alternativas directas para SY89825UHI — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
SY89825UHY
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
SY89825UHI Especificaciones
| Product Type | PECL bus clock driver and translator |
| Manufacturer | Microchip Technology |
| Maximum Frequency | 2 GHz |
| Fanout Ratio | 1:22 |
| Number of Inputs | 2 |
| Número de salidas | 22 LVPECL outputs |
| Multiplexer Ratio | 2:1 |
| Input Logic Levels | LVDS and LVPECL |
| Output Logic Level | LVPECL |
| Tensión de alimentación | 2.5 V or 3.3 V |
| Maximum Pin-to-Pin Skew | 35 ps |
| Input Termination | Internal termination |
| Encapsulado | 64-pin TQFP with exposed pad |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de SY89825UHI 64-pin tqfp with exposed pad
Configuración de pines para SY89825UHI (encapsulado 64-pin tqfp with exposed pad). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para SY89825UHI.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
SY89825UHI es adecuado para 6 aplicacións: Telecommunications Backplane Clock Distribution, Network Interface Clock Trees, Industrial Data Acquisition Systems, Test and Measurement Instrumentation, High-Speed Digital System Clocking, Clock Redundancy and Source Selection.
Telecommunications Backplane Clock Distribution
The SY89825UHI is suited to distributing a selected backplane clock across up to 22 receiving circuits. Its 2:1 input multiplexer can combine normal operation with a second clock source, while the 1:22 fanout reduces the number of separate clock buffers required. Operating up to 2 GHz and limiting pin-to-pin skew to 35 ps helps preserve timing margin across the distributed network. The LVPECL outputs suit high-speed backplane logic, while internal input termination simplifies LVDS or LVPECL source connections. Routing must retain controlled impedance and a continuous ground reference to minimize reflections and maintain timing consistency.
Network Interface Clock Trees
Use the SY89825UHI when several network-interface or line-card circuits require a locally distributed reference clock. Twenty-two LVPECL outputs can feed multiple endpoint devices without requiring a separate fanout stage for every branch. The integrated 2:1 multiplexer supports source selection or test-clock injection, and the 35 ps maximum pin-to-pin skew helps retain alignment across receivers operating at frequencies up to 2 GHz. Careful output ordering and matched routing lengths are essential because package and board propagation delays can add to device skew. The 64-pin TQFP exposed-pad package also requires adequate thermal and decoupling treatment.
Industrial Data Acquisition Systems
The SY89825UHI can distribute a common sampling or trigger clock to multiple converters, counters, and field-programmable logic sections in an industrial acquisition system. Its 2 GHz maximum frequency preserves headroom for fast data paths, while the 1:22 fanout supports a broad internal clock tree. The two-input multiplexer allows a system clock and an alternate calibration or test clock to share the same distribution network. Differential LVPECL outputs improve noise immunity over long interconnects when routing is controlled. Designers should validate receiver thresholds, trace impedance, connector transitions, and clock-return paths across the complete board rather than treating the fanout stage as an isolated component.
Test and Measurement Instrumentation
A multi-channel oscilloscope, signal analyzer, or automated test platform can use the SY89825UHI as a centralized clock distributor. The 22 LVPECL outputs can provide phase-consistent sampling clocks to acquisition or processing channels, while the 2:1 multiplexer permits selection between an internal reference and an external trigger-derived source. A maximum frequency of 2 GHz supports demanding test architectures, and the 35 ps maximum pin-to-pin skew limits channel-to-channel timing spread. For instrumentation-grade performance, use symmetric routing, minimize layer transitions, provide local supply bypassing, and treat exposed-pad thermal management as part of the clock-tree design.
High-Speed Digital System Clocking
The SY89825UHI fits centralized clocking for processors, programmable logic, serializers, and high-speed interface controllers that must share a coherent reference. Its integrated translation function accepts LVDS or LVPECL sources and produces a consistent LVPECL clock tree, while the 1:22 ratio supports broad distribution without building a multi-stage buffer tree. Maximum frequency of 2 GHz and 35 ps maximum pin-to-pin skew help preserve high-speed timing margins. Because all 22 outputs share one device, thermal and process variation affect the entire tree, making load balance, output enable strategy, and systematic deskew important system-level considerations.
Clock Redundancy and Source Selection
The SY89825UHI can simplify clock-redundancy schemes by multiplexing two incoming clock sources before distributing the selected signal through 22 LVPECL outputs. One input can carry the primary operating clock while the other supplies a backup, test, or calibration source, allowing switching logic upstream to select the appropriate path. The device operates at 2.5 V or 3.3 V and supports LVDS or LVPECL inputs, which helps accommodate different source domains. Source-switch timing, glitch behavior, input termination, and receiver tolerances should be verified in system-level simulations before relying on the mux for uninterrupted production testing or redundant operation.
Datos de referencia de ingeniería para SY89825UHI — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | SY89825UHY |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 64-pin TQFP exposed pad | 64-pin TQFP exposed pad |
| Maximum Frequency | 2 GHz | 2 GHz |
| Fanout Ratio | 1:22 | 1:22 |
| Input Configuration | 2 inputs with 2:1 multiplexing | 2 inputs with 2:1 multiplexing |
| Input Logic Levels | LVDS and LVPECL | LVDS and LVPECL |
| Output Logic Level | LVPECL | LVPECL |
| Supply Voltage | 2.5 V or 3.3 V | 2.5 V or 3.3 V |
| Maximum Pin-to-Pin Skew | 35 ps | 35 ps |
| Internal Input Termination | Yes | Yes |
Diferenciadores clave
- Integrated high-ratio clock fanout (frente a SY89825UHY)
- Integrated 2:1 clock multiplexing (frente a SY89825UHY)
- Low output skew (frente a SY89825UHY)
- Broad interface integration (frente a SY89825UHY)
Notas de diseño
Route every LVPECL output as a controlled-impedance differential pair over a continuous ground plane. Avoid plane changes, long stubs, and unnecessary test pads on clock nets, because transitions and stubs can create reflections that degrade the sub-35 ps output-skew relationship. Keep the clock source, multiplexer section, and output fanout on a predictable layer structure, and match output and input interface geometry where board constraints permit.
Decouple the 2.5 V or 3.3 V supply close to the SY89825UHI pins using the capacitance and placement required by the manufacturer datasheet. Connect the exposed pad through multiple thermal vias and adequate copper area, following the package guidance. Differential clock outputs can draw rapidly changing current, so a compact supply-and-return connection helps prevent supply noise from modulating the 2 GHz clock edge.
Do not assume that a pin-compatible alternative has identical ordering, qualification, or production attributes. The SY89825UHY is verified as a drop-in replacement, but the exact suffix should still be checked against temperature-grade and purchasing requirements. Also confirm that upstream LVDS or LVPECL levels match the selected input configuration and that internal termination is appropriate for the board-level source arrangement.
Treat all 22 outputs as a coordinated clock tree rather than independent nets. Preserve consistent spacing and reference geometry, and verify channel-to-channel timing at the receivers because device skew combines with PCB propagation mismatch and receiver variation. If a system switches between the two multiplexed inputs, characterize source-switch glitches and output settling before using the multiplexer for operational redundancy.
Información de cumplimiento
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact ordering code.