TCA8424RHAR - 24-Bit I2C Keypad Scanner | Texas Instruments
MPN: TCA8424RHAR ✗ জীবনকালের সমাপ্তিTCA8424RHAR সারাংশ
A keypad scanner is an interface integrated circuit that converts the electrical state of a matrix of switches into a compact digital status value. In the system hierarchy, it belongs to the interface-controller family within integrated circuits, alongside I2C and SMBus peripherals, GPIO expanders, and human-interface-device controllers. The TCA8424RHAR is designed to sit between a mechanical keypad matrix and an embedded host such as a microcontroller, leaving the host to interpret recognized key events and perform application-specific actions.
The principal feature is support for an 8×16 matrix, providing 128 scanning positions in a compact physical footprint. Its 24-bit key-state register provides a defined digital representation of the matrix, while the interrupt signal supports event-driven host communication. Operation from 1.65 V to 3.6 V makes the scanner suitable for low-voltage embedded systems, and the 1 MHz interface capability allows it to operate on a faster shared serial bus when host timing and bus capacitance permit.
The device combines matrix scanning with an I2C/SMBus-compliant host interface and HID-oriented keyboard-scanner functionality. These characteristics make it useful where a conventional matrix requires many host GPIO pins or where a dedicated serial keypad controller simplifies firmware. The scanner limits the host interface to the serial bus and interrupt line rather than requiring one GPIO input for every key position. Configuration and status reporting are handled through the serial interface, while the interrupt output indicates that the matrix state requires attention.
Typical applications include consumer keypads, security-access panels, industrial control membranes, portable instruments, and compact human-interface panels. A product with 128 possible switch positions can use the full scanner capacity, while systems with fewer switches can leave unused matrix positions unconnected according to the manufacturer's implementation guidance. The device can also complement a touchscreen controller by providing physical-key input alongside touch input when a product requires both interaction methods.
Layout planning should account for the 40-pin VQFN footprint, exposed thermal pad, decoupling requirements, and signal integrity of the I2C bus. Place the input and interface bypass capacitors close to their corresponding pins, route the interrupt trace away from high-current switching nodes, and confirm pull-up values against the bus voltage, capacitance, and operating speed. Because the 1 MHz rating is a maximum interface capability rather than a requirement for every design, use a conservative bus rate when signal-integrity margins are limited.
This product page combines the manufacturer’s device capabilities with package, sourcing, interface, and design information in one engineering-focused reference. It also identifies the limits of the available substitution evidence: no same-package, pin-to-pin replacement is asserted unless its electrical characteristics and land pattern have been independently confirmed.
এর জন্য ড্রপ-ইন বিকল্প TCA8424RHAR — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।
বিকল্প অনুরোধ করুনTCA8424RHAR বিশেষণ
| Device Type | 8×16 keyboard scanner |
| Key Matrix Capacity | 128 keys |
| Key-State Register Width | 24 bits |
| অপারেটিং সাপ্লাই ভোল্টেজ | 1.65 V to 3.6 V |
| Maximum I2C/SMBus Interface Frequency | 1 MHz |
| Host Interface | I2C/SMBus-compatible |
| Interrupt Output | Present |
| Package Type | 40-pin VQFN |
| Package Dimensions | 6 mm × 6 mm |
| মাউন্টিং টাইপ | Surface mount |
TCA8424RHAR 6 mm × 6 mm পিন কনফিগারেশন গাইড
TCA8424RHAR (6 mm × 6 mm প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি TCA8424RHAR.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
TCA8424RHAR এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Consumer Security Keypad, Industrial Control Membrane, Portable Test Instrument, Human-Interface Control Panel, Appliance Control Panel, Portable Medical or Diagnostic Panel.
Consumer Security Keypad
The TCA8424RHAR fits a numeric access keypad that requires many keys without consuming a separate host pin for every switch position. Its 8×16 architecture supports as many as 128 matrix positions, while the 24-bit key-state register provides a compact serialized representation of the keypad. The 1.65 V to 3.6 V operating range also fits many low-voltage embedded access-control systems. Place the controller beside the keypad connector, use the interrupt output to wake the host after a key event, and keep the I2C route away from motor and relay switching nodes. Firmware should debounce according to the switch characteristics and the scanner behavior described by Texas Instruments.
সুপারিশকৃত
Industrial Control Membrane
A membrane keypad in an industrial controller can use the TCA8424RHAR to monitor a large switch field through a compact serial interface. Supporting 128 possible key positions allows the panel to combine function keys, navigation controls, and numeric entry without assigning 128 microcontroller GPIO inputs. The I2C/SMBus-compatible interface operates up to 1 MHz, while the interrupt output supports event-driven host processing and can reduce unnecessary polling in a control panel with infrequent user activity. Designers should verify voltage levels, incorporate bus pull-ups appropriate to the operating frequency, and provide local filtering near long or electrically noisy membrane traces.
সুপারিশকৃত
Portable Test Instrument
The TCA8424RHAR is appropriate for a compact measurement instrument whose front panel contains an 8×16 key matrix. The dedicated scanner keeps matrix wiring organized and presents key state to the host over I2C/SMBus, leaving the controller available for measurement and display functions. The 1.65 V to 3.6 V supply range supports low-voltage portable equipment, and the interrupt signal allows the host to suspend active measurement tasks until a control is pressed. For battery-operated instruments, validate standby behavior and leakage against the complete power budget. The 40-pin VQFN also requires careful thermal-pad and trace-layout planning within a densely populated handheld enclosure.
সুপারিশকৃত
Human-Interface Control Panel
A human-interface control panel can use the TCA8424RHAR to consolidate physical navigation and function keys into an 8×16 matrix. This is useful when the product needs more than a handful of buttons but should avoid a large GPIO footprint. The interrupt output provides a direct signal for waking the application processor, while the 24-bit register supplies the scanned state over the serial bus. In mixed display-and-keypad products, the scanner can operate alongside a display interface and touch controller, provided the firmware assigns independent host resources. Firmware should establish a stable key-event model and verify debounce timing under both fast presses and simultaneous key combinations.
সুপারিশকৃত
Appliance Control Panel
The TCA8424RHAR can serve as the input controller for an appliance panel containing a dense membrane keypad. Its 128-key matrix capability allows designers to combine numeric entry, mode selection, and dedicated function keys behind one serial peripheral. The 1.65 V to 3.6 V operating range accommodates low-voltage control electronics, while the interrupt capability reduces the need for continuous host scanning. The interface should be isolated from high-current motor-control and switching-supply regions, with the I2C pull-ups placed close to the bus and the keypad traces routed away from noisy power stages. Production testing should include bounce, stuck-key, and intermittent-connector fault coverage.
সুপারিশকৃত
Portable Medical or Diagnostic Panel
A compact diagnostic instrument can use the TCA8424RHAR for a physical keypad that complements display-based operation. The dedicated scanner supports an 8×16 matrix, giving designers up to 128 switch positions without requiring equivalent GPIO capacity on the main controller. The interrupt output supports prompt host response, and the low 1.65 V to 3.6 V operating range is compatible with embedded power systems. Because medical or diagnostic equipment may combine sensitive analog measurement circuits with touch displays, keypad and I2C routing should remain away from high-impedance inputs. Confirm electromagnetic-immunity requirements, connector debounce behavior, and the risk-control process before using this obsolete catalog part in a new regulated design.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা TCA8424RHAR — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য |
|---|---|
| Device Type | 8×16 keyboard scanner |
| Brand | Texas Instruments |
| Package | 40-pin VQFN, 6 mm × 6 mm |
| Key Capacity | 128 keys |
| Key-State Register | 24 bits |
| Operating Supply Voltage | 1.65 V to 3.6 V |
| Maximum Interface Frequency | 1 MHz |
| Host Interface | I2C/SMBus-compatible |
| Interrupt Output | Present |
মূল পার্থক্যসমূহ
- Large matrix capacity in a compact interface IC (বনামDirect microcontroller GPIO matrix scanning)
- Event-driven host integration (বনামPeriodic software key polling)
- Compact serial interface footprint (বনামDiscrete GPIO matrix implementation)
ডিজাইন নোট
Treat the TCA8424RHAR as a 40-pin VQFN rather than a generic QFN. Follow the Texas Instruments land pattern and exposed-pad recommendations for the 6 mm × 6 mm package, including the required via arrangement and solderable thermal area. Place input, interface, and reference decoupling capacitors close to their associated pins to minimize loop area. Confirm the final footprint against the package drawing before releasing PCB artwork.
The interface can operate at up to 1 MHz, but the usable bus rate depends on bus capacitance, pull-up strength, clock stretching, and trace topology. Calculate the pull-up network for the actual voltage and load, keep the I2C route short, and provide a continuous ground reference beneath the pair. Reduce the switching rate or add series damping if edge overshoot or ringing appears on long PCB routes.
Do not interpret the 1 MHz rating as proof that every bus can run at 1 MHz. Verify the host controller, pull-ups, capacitance, and peripheral timing, then select a lower rate when system margin is limited. Also account for switch bounce when interpreting the 24-bit key-state register, and use the interrupt output with a host debounce strategy rather than assuming every electrical transition represents a deliberate user action.
Keep the keypad matrix and I2C traces away from switching regulators, relay drivers, motor outputs, and high-current return paths. A continuous ground plane beneath the controller can reduce coupling, but avoid routing matrix signals directly above a noisy power stage. Where the keypad cable is long or the environment contains an inverter or motor, use the shortest practical connection, provide a solid reference plane, and validate the complete panel for susceptibility and false key events.
কমপ্লায়েন্স তথ্য
The Texas Instruments product page and package listings do not provide explicit compliance declarations for this MPN. The RHAR ordering suffix identifies the packaged device but does not independently establish RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals status.