Texas Instruments

THS1206CDA - 12-Bit 6 MSPS Quad-Channel ADC | Texas Instruments

MPN: THS1206CDA ✓ সক্রিয়
4.75 V to 5.25 V Vdss 32-pin TSSOP (DA) Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

THS1206CDA সারাংশ

The Texas Instruments THS1206CDA is a 12-bit, 6 MSPS, four-channel configurable analog-to-digital converter in a 32-pin TSSOP (DA) package. It supports simultaneous sampling of four single-ended signals, two differential signals, or a combination of differential and single-ended inputs. The converter operates from a single 4.75 V to 5.25 V supply and supports a commercial temperature range of 0°C to 70°C.

An ADC is a data-converter IC that translates an analog voltage into a digital code for processing, measurement, or communication. The THS1206 belongs to the wider ADC and data-converter IC hierarchy, combining input acquisition, conversion, parallel digital output, and an integrated 16-word FIFO. Its four-channel architecture is useful when several sensors or signal sources must be sampled within the same acquisition interval rather than sequentially by a multiplexer.

Key features include 12-bit resolution, a 6 MSPS conversion rate, four configurable analog inputs, and a pipelined conversion architecture. The device supports simultaneous sampling of four single-ended channels or two differential channels and can combine both input types. Its 16-word FIFO helps buffer parallel conversion data and reduce processor handshaking overhead. The specified differential nonlinearity is ±1 LSB, integral nonlinearity is ±1.5 LSB, and signal-to-noise and distortion ratio is 68 dB.

The THS1206CDA uses a parallel interface to transfer converted data to a digital processor or programmable logic. Its configurable input architecture allows a board to handle higher signal integrity demands through differential conversion while retaining flexibility for single-ended sources. Because it is a pipelined converter, system timing must account for the latency between command sampling and the corresponding output code.

Typical applications include industrial process measurement, communications infrastructure, DSP or microprocessor interface circuits, multichannel instrumentation, and embedded control systems that require synchronized analog acquisition. The integrated FIFO is particularly valuable in systems where the host processor cannot accept every parallel conversion result without buffering.

Design the input network to keep analog and digital return paths separated, place bypass capacitance close to the supply pins, and route the parallel bus away from high-slew-rate inputs. Account for input settling time, acquisition timing, conversion latency, and the relationship between analog input range and digital output codes when defining the signal chain.

This product page combines the manufacturer’s device description with practical interface guidance, parameter comparisons, application patterns, and design notes. These resources help engineers evaluate the THS1206CDA for 12-bit multichannel acquisition without repeating the work required to interpret the complete datasheet.

এর জন্য ড্রপ-ইন বিকল্প THS1206CDA — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

THS1206IDARG4

✅ ড্রপ-ইন
📦 TSSOP-32 (DA)
Same THS1206 family and 32-pin DA package; extended-temperature ordering code differs, with the available comparison not quantifying electrical differences.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

THS1206CDAR

✅ ড্রপ-ইন
📦 TSSOP-32 (DA)
Same THS1206CDA device and TSSOP-32 DA package; the ordering suffix denotes a different reel packing format rather than an electrical change.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

THS1206CDA সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

রেজোলিউশন 12 bit
Conversion Rate 6 MSPS
Analog Input Channels 4 channels
Single-Ended Sampling 4 simultaneous single-ended inputs
Differential Sampling 2 simultaneous differential inputs
Supply Voltage Range 4.75 V to 5.25 V
অপারেটিং তাপমাত্রার পরিসর 0°C to 70°C
Differential Nonlinearity Error ±1 LSB
Integral Nonlinearity Error ±1.5 LSB
Signal-to-Noise and Distortion Ratio 68 dB
FIFO Depth 16 words
Conversion Architecture 1 pipelined
Digital Interface Parallel
Channel Configuration Configurable
Channel Autoscan Supported
প্যাকেজ 32-pin TSSOP (DA)
Package Body Size 6.1 mm
মাউন্টিং টাইপ Surface mount
RoHS স্ট্যাটাস Compliant

THS1206CDA 6.1 mm পিন কনফিগারেশন গাইড

THS1206CDA (6.1 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

THS1206CDA-এর জন্য 6.1 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি THS1206CDA.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

THS1206CDA এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Process Measurement, Communications IF Interface, DSP and Microprocessor Acquisition, Multichannel Test and Measurement, Synchronized Sensor Acquisition, Embedded Control and Monitoring.

🏭

Industrial Process Measurement

The THS1206CDA fits multichannel process instrumentation because it samples up to four single-ended inputs or two differential inputs simultaneously at 6 MSPS. This allows pressure, temperature, level, or current-sense signals to be captured within the same acquisition interval instead of being scanned sequentially. Its 12-bit resolution provides 4096 code levels, while the specified ±1 LSB differential nonlinearity and ±1.5 LSB integral nonlinearity support consistent readings across the configured range. The integrated 16-word FIFO can buffer parallel results, reducing the frequency at which the host processor must service the converter. Use differential inputs where sensor wiring can introduce common-mode noise.

🌐

Communications IF Interface

The THS1206CDA can serve as the ADC stage in a communications intermediate-frequency signal chain where a 12-bit, 6 MSPS conversion rate and parallel digital output are useful. Four configurable inputs allow multiple receiver channels or related signal paths to be sampled concurrently. A downstream DSP can consume the converted codes through the parallel bus, while the internal 16-word FIFO provides limited decoupling between sample production and host processing. The 4.75 V to 5.25 V single-supply range simplifies interface planning for conventional digital logic. Designers should preserve the acquisition and conversion timing defined in the manufacturer datasheet.

🖥️

DSP and Microprocessor Acquisition

The THS1206CDA is appropriate for a DSP or microprocessor interface that requires deterministic parallel conversion data and multiple simultaneous inputs. At 6 MSPS, it can provide a 12-bit code every 166.7 ns, making the interface timing a central part of system design. The 16-word FIFO helps the receiving processor manage bursts of data, although it does not eliminate the need to observe conversion timing and FIFO status. The configurable channel architecture supports single-ended or differential acquisition without changing the converter package. Designers should use the manufacturer timing diagrams to align conversion control, output data, and host read cycles.

🔧

Multichannel Test and Measurement

The THS1206CDA can support multichannel instrumentation in which several analog quantities must be captured consistently and converted for analysis. Simultaneous sampling is valuable when phase, delay, or time-correlated comparisons matter because all four single-ended channels share the same sampling interval. Its 6 MSPS rate provides useful temporal resolution, and the 12-bit output offers a balance between conversion speed and resolution. The 16-word FIFO assists with host synchronization, but buffer-depth monitoring remains essential. For high-accuracy measurement, use the characterized input ranges, reference behavior, and acquisition timing from the manufacturer datasheet rather than assuming ideal converter linearity.

🧩

Synchronized Sensor Acquisition

The four-channel architecture makes the THS1206CDA suitable for synchronized sensor acquisition where physical relationships between measurements must be preserved. For example, multiple bridge or transducer outputs can be sampled together, reducing timing skew that would arise from sequential multiplexing. The converter can accept four single-ended sensor signals or two differential pairs, and its 6 MSPS rate captures rapid transients more effectively than a lower-rate converter. Differential operation generally improves rejection of common-mode noise, while single-ended operation simplifies sensor interfacing. The selected sensor bandwidth, input drive impedance, and converter acquisition time must be evaluated together.

⚡

Embedded Control and Monitoring

The THS1206CDA supports embedded monitoring systems that combine several analog measurements with real-time control decisions. Four simultaneous channels can represent actuator feedback, supply conditions, sensor inputs, and diagnostic signals, while the parallel bus integrates naturally with programmable logic or a microcontroller. The integrated FIFO can reduce processor interrupt frequency by grouping conversion results. At the same time, designers should avoid treating the FIFO as unlimited storage and must check its status before conversion results are overwritten. The commercial 0°C to 70°C rating should be checked against enclosure temperature, especially in power converters and motor-control equipment.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

THS1041IDW Texas Instruments ব্যবহৃত হয়: Industrial Process Measurement, Multichannel Test and Measurement THS1040IDW Texas Instruments ব্যবহৃত হয়: Industrial Process Measurement THS7316DR Texas Instruments ব্যবহৃত হয়: Industrial Process Measurement, Communications IF Interface TAS5508PAGR Texas Instruments ব্যবহৃত হয়: Communications IF Interface TAS5504PAGR Texas Instruments ব্যবহৃত হয়: Communications IF Interface STM32G431G8U6TR Microcontroller platform for parallel ADC acquisition ব্যবহৃত হয়: DSP and Microprocessor Acquisition STM32G474VET6TR STMicroelectronics ব্যবহৃত হয়: DSP and Microprocessor Acquisition, Synchronized Sensor Acquisition EFM32TG842F12U8U Microcontroller platform for embedded acquisition ব্যবহৃত হয়: DSP and Microprocessor Acquisition THS1031IDW Texas Instruments ব্যবহৃত হয়: Multichannel Test and Measurement INA240A1PW Texas Instruments ব্যবহৃত হয়: Multichannel Test and Measurement INA149AIDR Texas Instruments ব্যবহৃত হয়: Synchronized Sensor Acquisition INA240A3DR Texas Instruments ব্যবহৃত হয়: Synchronized Sensor Acquisition STM32G071GBU6TR STMicroelectronics ব্যবহৃত হয়: Embedded Control and Monitoring STM32G031G6U6TR STMicroelectronics ব্যবহৃত হয়: Embedded Control and Monitoring TAS5086DBTR Texas Instruments ব্যবহৃত হয়: Embedded Control and Monitoring
What is the THS1206CDA?
The THS1206CDA is a 12-bit, 6 MSPS, four-channel configurable ADC with an integrated 16-word FIFO and parallel interface. Texas Instruments specifies it for simultaneous sampling of four single-ended signals, two differential signals, or a combination of both. It operates from a single 4.75 V to 5.25 V supply and is packaged in a 32-pin TSSOP. According to the TI product page, the device is intended for DSP, microprocessor, communications-interface, and industrial signal-acquisition applications.
How many analog input channels does THS1206CDA have?
The THS1206CDA provides four configurable analog input channels and supports simultaneous sampling at 6 MSPS. The manufacturer describes four possible single-ended inputs, two possible differential inputs, or a combination of differential and single-ended configurations. Its pipelined architecture acquires multiple channels concurrently, making it more useful for synchronized measurements than a single-channel converter. According to the TI THS1206 product page, the four-channel architecture is configurable rather than limited to one fixed input arrangement.
What is the conversion rate and resolution of THS1206CDA?
The THS1206CDA converts at up to 6 MSPS with 12-bit resolution. This produces one 12-bit conversion result every 166.7 ns at the maximum conversion rate. The 6 MSPS specification applies to the device family described by Texas Instruments, while the integrated 16-word FIFO buffers parallel results for downstream processing. According to the TI product page, the device is positioned as a low-power, configurable ADC for DSP, microprocessor, and communications-interface applications.
Where can I download the THS1206CDA datasheet PDF?
The official THS1206CDA datasheet is available through the Texas Instruments THS1206 product page at https://www.ti.com/product/THS1206, where ordering information, technical parameters, and device documentation are published. The part-specific ordering page is https://www.ti.com/product/THS1206/part-details/THS1206CDA. Use the manufacturer PDF for the complete pin descriptions, timing diagrams, electrical characteristics, and application guidance before assigning the 32-pin TSSOP layout.
Where can I find the THS1206CDA pinout?
The THS1206CDA pinout is documented in the pin configuration and pin-description tables of the Texas Instruments manufacturer datasheet. The exact MPN uses a 32-pin TSSOP (DA) package, so the PCB footprint must follow the DA-package pin numbering rather than a generic 32-pin TSSOP drawing. The product page identifies the package and pin count, while the manufacturer datasheet provides the authoritative signal names, analog connections, supply pins, digital outputs, and control pins.
Does THS1206CDA support differential and single-ended inputs?
Yes. The THS1206CDA supports four single-ended inputs, two differential inputs, or a combination of both. Its flexible configuration allows a board to compare paired signals differentially when common-mode noise or signal integrity is important while retaining channels for single-ended transducers. The TI product description identifies the device as a four-channel configurable ADC, and the manufacturer datasheet contains the recommended input-connection configurations for each channel arrangement.
Where can I buy THS1206CDA online?
Use the Request a Quote form on this page to request THS1206CDA availability, pricing, lead time, and the exact quantity needed. The form allows the request to match the manufacturer ordering code THS1206CDA without requiring a static price that may become outdated. Texas Instruments identifies the part as a 32-pin TSSOP device rated from 0°C to 70°C, so the request should specify the required package, commercial temperature grade, and delivery quantity.
What is the price of THS1206CDA?
Current THS1206CDA pricing is handled through the Request a Quote form on this page because pricing and availability can change with quantity, market conditions, and packaging requirements. Submit the required order quantity and delivery location for a current quotation. The device is the 32-pin TSSOP version of TI’s 12-bit, 6 MSPS THS1206 ADC, so include THS1206CDA exactly when requesting the quotation.
What is the lead time for THS1206CDA?
Request the current THS1206CDA lead time through the Request a Quote form on this page. Lead time can depend on order quantity, packaging configuration, and supply availability, so it should be confirmed for each procurement event rather than assumed from a historical listing. The manufacturer part code is THS1206CDA, and it identifies the commercial-temperature, 32-pin TSSOP configuration intended for normal industrial and commercial operating conditions.
Is THS1206CDA in stock?
Current THS1206CDA stock status should be requested through the Request a Quote form on this page. The form accepts the required quantity and can be used to confirm availability for the exact manufacturer ordering code. Texas Instruments publishes the part as a 12-bit, 6 MSPS, four-channel configurable ADC with a 16-word FIFO in a 32-pin TSSOP package, so no alternate package or temperature grade needs to be substituted when checking supply.
When should I choose THS1206CDA for an ADC design?
Choose the THS1206CDA when a design needs simultaneous acquisition from up to four analog sources at 6 MSPS, 12-bit resolution, and a parallel interface. It is especially suitable when multiple channels must share one sampling interval or when the integrated 16-word FIFO can reduce host-processor data-handling pressure. According to Texas Instruments, the configurable input architecture supports single-ended, differential, and mixed arrangements, providing flexibility across DSP, microprocessor, communications, and instrumentation systems.
THS1206CDA vs THS1206IDARG4 - which is better for a commercial-temperature design?
The THS1206CDA is the appropriate choice for a design explicitly limited to the 0°C to 70°C commercial temperature range. The THS1206IDARG4 appears as an extended-temperature family comparison, but the available cross-reference excerpt does not provide its complete electrical or package specification. According to Texas Instruments, THS1206CDA uses a 32-pin TSSOP and supports 4.75 V to 5.25 V operation. Confirm the full ordering details for THS1206IDARG4 in its manufacturer documentation before treating it as a replacement.
What is the best drop-in replacement for THS1206CDA?
No fully verified drop-in replacement can be recommended from the available cross-reference information. The identified THS1206IDARG4 comparison concerns the same converter family, but the technical excerpt does not establish every pin, timing, temperature, and electrical parameter required for drop-in qualification. A defensible replacement must retain the 32-pin TSSOP footprint, 12-bit parallel interface, 6 MSPS conversion rate, configurable four-channel input architecture, and required operating-temperature range. Review the manufacturer datasheet and validate timing and analog performance before substitution.
What can replace THS1206CDA without changing the PCB?
A PCB-compatible replacement must use the same 32-pin TSSOP DA footprint and preserve pin-to-pin signal functions, supply connections, analog input ranges, conversion timing, and output coding. No cross-brand equivalent is established by the available replacement results, so the THS1206IDARG4 family member should be treated as a candidate rather than a confirmed substitute. Use Texas Instruments’ cross-reference search and compare the manufacturer pin and electrical tables. PCB compatibility alone is insufficient if acquisition timing or input configuration differs.
What are the key specifications of THS1206CDA that engineers should know?
The essential THS1206CDA specifications are 12-bit resolution, a 6 MSPS conversion rate, four configurable channels, a 16-word FIFO, and a parallel interface in a 32-pin TSSOP package. The supply range is 4.75 V to 5.25 V, and the commercial operating range is 0°C to 70°C. Texas Instruments also specifies ±1 LSB differential nonlinearity, ±1.5 LSB integral nonlinearity, and a 68 dB signal-to-noise and distortion ratio. These parameters jointly determine acquisition rate, signal fidelity, timing, and thermal design.
Is THS1206CDA suitable for industrial measurement and communications systems?
The THS1206CDA is suitable for industrial measurement and communications-interface systems that need 12-bit, 6 MSPS multichannel sampling. Its four configurable inputs can support synchronized single-ended or differential measurements, while the 16-word FIFO helps buffer parallel output data. According to the TI product page, the THS1206 is intended for DSP, microprocessor, and communications-interface systems. Industrial suitability must also be evaluated against the specified 0°C to 70°C commercial temperature limit and the facility’s ambient requirements.
What Texas Instruments equivalent is available for THS1206CDA?
THS1206IDARG4 is the principal Texas Instruments family comparison identified for THS1206CDA, but the available material does not prove that every pin and timing parameter is interchangeable. The TI comparison page explicitly pairs THS1206CDA with THS1206IDARG4, while the manufacturer describes THS1206CDA as a 12-bit, 6 MSPS, four-channel configurable ADC in a 32-pin TSSOP package. Use the TI cross-reference search and manufacturer ordering tables to confirm electrical, temperature, and package compatibility before treating it as a drop-in replacement.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা THS1206CDA — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose THS1206CDA when the design needs a 12-bit, 6 MSPS ADC with four configurable inputs, simultaneous sampling, a parallel data bus, and a 16-word FIFO in a 32-pin TSSOP package. It is particularly suitable for synchronized industrial measurements, DSP and processor interfaces, and communications IF acquisition. THS1206CDAR offers the same device architecture and electrical ordering code with a different reel packing suffix, so use it when supply packaging requires that format. Consider THS1206IDARG4 when its extended-temperature ordering code addresses the enclosure environment, but verify its complete electrical limits, pin functions, and timing against the manufacturer datasheet before substituting it. Do not choose any candidate solely because it uses a 32-pin TSSOP footprint; input configuration, conversion latency, output coding, reference behavior, and FIFO control must also match.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য THS1206IDARG4 THS1206CDAR
Brand Texas Instruments Texas Instruments Texas Instruments
Package TSSOP-32 (DA) TSSOP-32 (DA) TSSOP-32 (DA)
Resolution 12 bit 12 bit 12 bit
Conversion Rate 6 MSPS 6 MSPS 6 MSPS
Analog Input Configuration 4 configurable channels; 4 single-ended or 2 differential inputs Same THS1206 family architecture 4 configurable channels; 4 single-ended or 2 differential inputs
Operating Temperature Range 0°C to 70°C Extended-temperature ordering code; exact range not stated in the available comparison 0°C to 70°C
FIFO Depth 16 words 16 words 16 words
Digital Interface Parallel Parallel Parallel

মূল পার্থক্যসমূহ

  • Four-channel simultaneous acquisition (বনামTHS1206CDAR)
  • Integrated data buffering (বনামTHS1206IDARG4)
  • Configurable analog input architecture (বনামTHS1206CDAR)

ডিজাইন নোট

Use the manufacturer’s recommended analog input and reference network, and place each bypass capacitor directly beside its associated supply pin. Route analog inputs away from the 12-bit parallel output bus and clock/control traces. Differential inputs can reduce sensitivity to common-mode noise, but their common-mode voltage, source impedance, and settling time must remain inside the device limits. PCB return paths should be continuous under the TSSOP rather than split across analog and digital sections.

Estimated: the converter’s analog and digital supply requirements must be met by a low-noise 5 V source with decoupling placed at the package pins. If the supply varies, the permitted operating range is 4.75 V to 5.25 V. Avoid placing the converter directly behind long, impedance-controlled traces or shared supply stubs without local bypass capacitance. Confirm the reference voltage, supply sequencing, and digital input thresholds in the manufacturer electrical-characteristics tables.

Do not treat the 16-word FIFO as permission to ignore its status or overflow behavior. The host must retrieve results before the FIFO reaches its capacity, and it must account for pipelined-conversion latency between the sample command and the corresponding output code. Also distinguish simultaneous four-channel sampling from sequential multiplexing. These distinctions affect phase accuracy and the timing needed by a DSP or microprocessor interface.

Assign the 32-pin DA-package footprint from the manufacturer drawing, including pin-1 orientation, lead pitch, and solder-mask details. Follow the datasheet’s parallel-output layout recommendations to minimize simultaneous output switching. Keep clock and data routing short, use a continuous ground reference, and avoid test-point stubs on high-speed data nets. Validate signal integrity with the actual host timing, output load, and board stack-up used in production.

কমপ্লায়েন্স তথ্য

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The JLCPCB product result identifies THS1206CDA as RoHS compliant. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement is present in the available manufacturer and distributor information.

ডেটা যাচাই করা হয়েছে: 2026-11-16 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

THS1206CDA datasheet THS1206CDA specifications THS1206CDA pinout THS1206CDA datasheet pdf THS1206CDA equivalent THS1206CDA replacement THS1206CDA vs THS1206IDARG4 THS1206CDA footprint THS1206CDA application circuit THS1206CDA price THS1206CDA stock Texas Instruments THS1206CDA THS1206 12 bit ADC THS1206 TSSOP-32 pinout THS1206 6 MSPS ADC

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments THS1206CDA THS1206 THS1206IDARG4 THS1206CDAR analog-to-digital converter ADC data-converter IC semiconductor 12-bit resolution 6 MSPS conversion rate configurable analog input single-ended input differential input parallel interface 16-word FIFO pipelined ADC TSSOP-32 DA package surface-mount package integrated circuit industrial process measurement communications IF DSP interface RoHS
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন