THS1206CDA - 12-Bit 6 MSPS Quad-Channel ADC | Texas Instruments
Référence : THS1206CDA ✓ ActifTHS1206CDA Présentation
An ADC is a data-converter IC that translates an analog voltage into a digital code for processing, measurement, or communication. The THS1206 belongs to the wider ADC and data-converter IC hierarchy, combining input acquisition, conversion, parallel digital output, and an integrated 16-word FIFO. Its four-channel architecture is useful when several sensors or signal sources must be sampled within the same acquisition interval rather than sequentially by a multiplexer.
Key features include 12-bit resolution, a 6 MSPS conversion rate, four configurable analog inputs, and a pipelined conversion architecture. The device supports simultaneous sampling of four single-ended channels or two differential channels and can combine both input types. Its 16-word FIFO helps buffer parallel conversion data and reduce processor handshaking overhead. The specified differential nonlinearity is ±1 LSB, integral nonlinearity is ±1.5 LSB, and signal-to-noise and distortion ratio is 68 dB.
The THS1206CDA uses a parallel interface to transfer converted data to a digital processor or programmable logic. Its configurable input architecture allows a board to handle higher signal integrity demands through differential conversion while retaining flexibility for single-ended sources. Because it is a pipelined converter, system timing must account for the latency between command sampling and the corresponding output code.
Typical applications include industrial process measurement, communications infrastructure, DSP or microprocessor interface circuits, multichannel instrumentation, and embedded control systems that require synchronized analog acquisition. The integrated FIFO is particularly valuable in systems where the host processor cannot accept every parallel conversion result without buffering.
Design the input network to keep analog and digital return paths separated, place bypass capacitance close to the supply pins, and route the parallel bus away from high-slew-rate inputs. Account for input settling time, acquisition timing, conversion latency, and the relationship between analog input range and digital output codes when defining the signal chain.
This product page combines the manufacturer’s device description with practical interface guidance, parameter comparisons, application patterns, and design notes. These resources help engineers evaluate the THS1206CDA for 12-bit multichannel acquisition without repeating the work required to interpret the complete datasheet.
Alternatives de remplacement direct pour THS1206CDA — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
THS1206IDARG4
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
THS1206CDAR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
THS1206CDA Valeurs maximales et caractéristiques électriques
| Résolution | 12 bit |
| Conversion Rate | 6 MSPS |
| Analog Input Channels | 4 channels |
| Single-Ended Sampling | 4 simultaneous single-ended inputs |
| Differential Sampling | 2 simultaneous differential inputs |
| Supply Voltage Range | 4.75 V to 5.25 V |
| Plage de température de fonctionnement | 0°C to 70°C |
| Differential Nonlinearity Error | ±1 LSB |
| Integral Nonlinearity Error | ±1.5 LSB |
| Signal-to-Noise and Distortion Ratio | 68 dB |
| FIFO Depth | 16 words |
| Conversion Architecture | 1 pipelined |
| Digital Interface | Parallel |
| Channel Configuration | Configurable |
| Channel Autoscan | Supported |
| Boîtier | 32-pin TSSOP (DA) |
| Package Body Size | 6.1 mm |
| Type de montage | Surface mount |
| Statut RoHS | Compliant |
Guide de configuration des broches du THS1206CDA 6.1 mm
Configuration des broches du THS1206CDA (boîtier 6.1 mm). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour THS1206CDA.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
THS1206CDA convient pour 6 applications: Industrial Process Measurement, Communications IF Interface, DSP and Microprocessor Acquisition, Multichannel Test and Measurement, Synchronized Sensor Acquisition, Embedded Control and Monitoring.
Industrial Process Measurement
The THS1206CDA fits multichannel process instrumentation because it samples up to four single-ended inputs or two differential inputs simultaneously at 6 MSPS. This allows pressure, temperature, level, or current-sense signals to be captured within the same acquisition interval instead of being scanned sequentially. Its 12-bit resolution provides 4096 code levels, while the specified ±1 LSB differential nonlinearity and ±1.5 LSB integral nonlinearity support consistent readings across the configured range. The integrated 16-word FIFO can buffer parallel results, reducing the frequency at which the host processor must service the converter. Use differential inputs where sensor wiring can introduce common-mode noise.
Recommandé
Communications IF Interface
The THS1206CDA can serve as the ADC stage in a communications intermediate-frequency signal chain where a 12-bit, 6 MSPS conversion rate and parallel digital output are useful. Four configurable inputs allow multiple receiver channels or related signal paths to be sampled concurrently. A downstream DSP can consume the converted codes through the parallel bus, while the internal 16-word FIFO provides limited decoupling between sample production and host processing. The 4.75 V to 5.25 V single-supply range simplifies interface planning for conventional digital logic. Designers should preserve the acquisition and conversion timing defined in the manufacturer datasheet.
Recommandé
DSP and Microprocessor Acquisition
The THS1206CDA is appropriate for a DSP or microprocessor interface that requires deterministic parallel conversion data and multiple simultaneous inputs. At 6 MSPS, it can provide a 12-bit code every 166.7 ns, making the interface timing a central part of system design. The 16-word FIFO helps the receiving processor manage bursts of data, although it does not eliminate the need to observe conversion timing and FIFO status. The configurable channel architecture supports single-ended or differential acquisition without changing the converter package. Designers should use the manufacturer timing diagrams to align conversion control, output data, and host read cycles.
Recommandé
Multichannel Test and Measurement
The THS1206CDA can support multichannel instrumentation in which several analog quantities must be captured consistently and converted for analysis. Simultaneous sampling is valuable when phase, delay, or time-correlated comparisons matter because all four single-ended channels share the same sampling interval. Its 6 MSPS rate provides useful temporal resolution, and the 12-bit output offers a balance between conversion speed and resolution. The 16-word FIFO assists with host synchronization, but buffer-depth monitoring remains essential. For high-accuracy measurement, use the characterized input ranges, reference behavior, and acquisition timing from the manufacturer datasheet rather than assuming ideal converter linearity.
Recommandé
Synchronized Sensor Acquisition
The four-channel architecture makes the THS1206CDA suitable for synchronized sensor acquisition where physical relationships between measurements must be preserved. For example, multiple bridge or transducer outputs can be sampled together, reducing timing skew that would arise from sequential multiplexing. The converter can accept four single-ended sensor signals or two differential pairs, and its 6 MSPS rate captures rapid transients more effectively than a lower-rate converter. Differential operation generally improves rejection of common-mode noise, while single-ended operation simplifies sensor interfacing. The selected sensor bandwidth, input drive impedance, and converter acquisition time must be evaluated together.
Recommandé
Embedded Control and Monitoring
The THS1206CDA supports embedded monitoring systems that combine several analog measurements with real-time control decisions. Four simultaneous channels can represent actuator feedback, supply conditions, sensor inputs, and diagnostic signals, while the parallel bus integrates naturally with programmable logic or a microcontroller. The integrated FIFO can reduce processor interrupt frequency by grouping conversion results. At the same time, designers should avoid treating the FIFO as unlimited storage and must check its status before conversion results are overwritten. The commercial 0°C to 70°C rating should be checked against enclosure temperature, especially in power converters and motor-control equipment.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour THS1206CDA — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | THS1206IDARG4 | THS1206CDAR |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | TSSOP-32 (DA) | TSSOP-32 (DA) | TSSOP-32 (DA) |
| Resolution | 12 bit | 12 bit | 12 bit |
| Conversion Rate | 6 MSPS | 6 MSPS | 6 MSPS |
| Analog Input Configuration | 4 configurable channels; 4 single-ended or 2 differential inputs | Same THS1206 family architecture | 4 configurable channels; 4 single-ended or 2 differential inputs |
| Operating Temperature Range | 0°C to 70°C | Extended-temperature ordering code; exact range not stated in the available comparison | 0°C to 70°C |
| FIFO Depth | 16 words | 16 words | 16 words |
| Digital Interface | Parallel | Parallel | Parallel |
Principaux différenciateurs
- Four-channel simultaneous acquisition (vs THS1206CDAR)
- Integrated data buffering (vs THS1206IDARG4)
- Configurable analog input architecture (vs THS1206CDAR)
Notes de conception
Use the manufacturer’s recommended analog input and reference network, and place each bypass capacitor directly beside its associated supply pin. Route analog inputs away from the 12-bit parallel output bus and clock/control traces. Differential inputs can reduce sensitivity to common-mode noise, but their common-mode voltage, source impedance, and settling time must remain inside the device limits. PCB return paths should be continuous under the TSSOP rather than split across analog and digital sections.
Estimated: the converter’s analog and digital supply requirements must be met by a low-noise 5 V source with decoupling placed at the package pins. If the supply varies, the permitted operating range is 4.75 V to 5.25 V. Avoid placing the converter directly behind long, impedance-controlled traces or shared supply stubs without local bypass capacitance. Confirm the reference voltage, supply sequencing, and digital input thresholds in the manufacturer electrical-characteristics tables.
Do not treat the 16-word FIFO as permission to ignore its status or overflow behavior. The host must retrieve results before the FIFO reaches its capacity, and it must account for pipelined-conversion latency between the sample command and the corresponding output code. Also distinguish simultaneous four-channel sampling from sequential multiplexing. These distinctions affect phase accuracy and the timing needed by a DSP or microprocessor interface.
Assign the 32-pin DA-package footprint from the manufacturer drawing, including pin-1 orientation, lead pitch, and solder-mask details. Follow the datasheet’s parallel-output layout recommendations to minimize simultaneous output switching. Keep clock and data routing short, use a continuous ground reference, and avoid test-point stubs on high-speed data nets. Validate signal integrity with the actual host timing, output load, and board stack-up used in production.
Informations de conformité
The JLCPCB product result identifies THS1206CDA as RoHS compliant. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement is present in the available manufacturer and distributor information.