THS1230CPW - 12-Bit 30-MSPS Parallel ADC | Texas Instruments
MPN: THS1230CPW ✓ সক্রিয়THS1230CPW সারাংশ
An ADC is a data-converter IC that samples an analog voltage and converts it into a digital number. The THS1230 belongs to the pipelined ADC family, a multistage converter architecture that supports high sampling rates while providing a 12-bit output word. In the broader electronics hierarchy, it is an ADC, then a data converter, then a mixed-signal semiconductor used for measurement and signal acquisition.
The principal features of the THS1230CPW are its 12-bit resolution, 30 MSPS conversion rate, single analog input, parallel data output, and low-power 3.3 V operation. A 28-bit parallel word represents each conversion result. The pipelined architecture can introduce a conversion latency, so downstream logic should account for the timing relationship between sample acquisition and output data.
The device uses a proprietary conversion method and CMOS technology. Parallel output exposes the 12 result bits directly to digital circuitry instead of serializing them through a serial interface. This reduces output-data handling complexity at high sample rates, but it requires a PCB with sufficient routing space, controlled clock distribution, and careful treatment of digital return currents near the analog input and reference circuitry.
Typical uses include communications-channel digitization, industrial signal acquisition, waveform capture, closed-loop control, and digital oscilloscope or data-acquisition subsystems. Its single-channel architecture favors applications with one high-rate analog signal rather than simultaneous multichannel sampling. System designers should also allow suitable analog drive and source-impedance networks to preserve conversion accuracy at the operating sample rate.
A key design consideration is power and signal integrity. Place decoupling capacitance close to the supply pins, provide a low-impedance clock source, and route analog and digital return currents so switching activity does not disturb the sampled input. Verify the input range, reference arrangement, acquisition timing, and output latency against the manufacturer datasheet before finalizing the PCB and firmware.
This product page consolidates the THS1230CPW electrical identity, package information, sourcing path, family comparisons, and practical implementation guidance into one engineering reference. It also distinguishes verified drop-in family options from devices that require a package redesign.
এর জন্য ড্রপ-ইন বিকল্প THS1230CPW — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible THS1230CPW (একই form factor এবং footprint) — পার্থক্য রয়েছে Input Type, AEC-Q100 Qualification, Architecture, Number of Channels, Operating Temperature Range.
THS1230IPW
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →THS1230CPW সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| ADC Type | Pipelined analog-to-digital converter |
| রেজোলিউশন | 12 bit |
| স্যাম্পলিং রেট | 30 MSPS |
| Number of Channels | 1 channel |
| Input Type | 1 analog input |
| Output Interface | 12-bit parallel |
| সাপ্লাই ভোল্টেজ | 3.3 V |
| Linearity Error | 0.0488% |
| Process Technology | CMOS |
| প্যাকেজ | 28-pin TSSOP |
| Package Type | PDSO28 |
| মাউন্টিং টাইপ | Surface mount |
| অপারেটিং তাপমাত্রার পরিসর | 0°C to +70°C |
| Power-Down Function | Yes |
| RoHS স্ট্যাটাস | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
THS1230CPW pdso28 পিন কনফিগারেশন গাইড
THS1230CPW (pdso28 প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি THS1230CPW.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
THS1230CPW এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Communications Channel Digitization, Industrial Waveform Acquisition, Closed-Loop Control Systems, Digital Oscilloscope Front End, Test and Measurement Signal Capture, Audio and Control Signal Analysis.
Communications Channel Digitization
The THS1230CPW fits communications-channel digitization because it samples one analog waveform at up to 30 MSPS and presents each 12-bit sample directly on a parallel bus. That interface allows an FPGA or capture logic to process samples without adding a serial deserializer. Place the converter close to the RF or IF conditioning stage, provide a low-jitter sampling clock, and keep digital output routing away from the analog input. The 3.3 V supply and 28-pin TSSOP package support compact mixed-signal boards, although the external analog bandwidth must be checked against the required signal bandwidth.
সুপারিশকৃত
Industrial Waveform Acquisition
The THS1230CPW is suitable for industrial waveform acquisition when a rapid transient must be digitized at high resolution. Its 12-bit, 30 MSPS conversion capability captures 768 million sample decisions per second while allowing the host processor or FPGA to receive each result through a parallel interface. A practical design should use an analog front end with suitable gain and bandwidth, a low-impedance clock source, and separate analog and digital return paths. The single input also makes it straightforward to allocate one converter to each high-priority sensor channel.
সুপারিশকৃত
Closed-Loop Control Systems
The THS1230CPW can serve as the feedback element in a closed-loop control system that must observe a fast analog control variable. Its 30 MSPS sampling rate provides substantially more frequent observations than a general-purpose slow ADC, while the 12-bit parallel result can feed a digital controller or FPGA without serial framing overhead. The design must account for pipeline latency and acquisition timing, and the front-end sensor or amplifier must drive the input consistently. Verify the input range and reference requirements in the manufacturer datasheet before closing the control loop.
সুপারিশকৃত
Digital Oscilloscope Front End
The THS1230CPW is appropriate for the acquisition front end of a digital oscilloscope or high-speed measurement instrument requiring parallel sample delivery. At 30 MSPS and 12 bits, it provides a useful balance between temporal resolution and amplitude detail, while its 28-pin TSSOP package supports compact instrument designs. A scope implementation should synchronize the sampling clock with the trigger system, buffer the parallel outputs where necessary, and isolate high-current processor and display circuitry from the analog input. Calibration also depends on the selected reference and input-conditioning circuitry.
সুপারিশকৃত
Test and Measurement Signal Capture
The THS1230CPW can convert repetitive or transient test signals into parallel digital data for analysis by FPGA or logic instrumentation. Its 30 MSPS rate supports sampling of higher-frequency behavior than typical general-purpose ADCs, and the 12-bit word provides 4096 numerical codes across the converter range. The acquisition chain should include controlled gain, input-range selection, and an anti-alias filter. Because the output is parallel, the receiving device must be positioned to avoid long data buses, or an intermediate latch should be used to preserve timing margin.
সুপারিশকৃত
Audio and Control Signal Analysis
The THS1230CPW may be used in specialized audio or control-signal analysis systems that require faster sampling than conventional audio converters provide. A 30 MSPS sampling rate allows direct capture of substantially higher-frequency content, and the parallel output can feed real-time processing hardware. However, the analog input must be conditioned to the converter's permitted range, and the design should include appropriate anti-alias filtering. Clock jitter, source impedance, and return-path separation are especially important when extracting small signals from a mixed-signal control board.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা THS1230CPW — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | THS1230IPW |
|---|---|---|
| Package | 28-pin TSSOP | 28-pin TSSOP |
| Brand | Texas Instruments | Texas Instruments |
| Resolution | 12 bit | 12 bit |
| Sampling Rate | 30 MSPS | 30 MSPS |
| Number of Channels | 1 channel | 1 channel |
| Supply Voltage | 3.3 V | 3.3 V |
| Output Interface | 12-bit parallel | 12-bit parallel |
| Converter Architecture | Pipelined, proprietary method | Pipelined, proprietary method |
| Power-Down Function | Yes | Yes |
মূল পার্থক্যসমূহ
- High-speed parallel conversion (বনামTHS1230IPW)
- Single 3.3 V supply architecture (বনামTHS1230IPW)
- Same-footprint family sourcing option (বনামTHS1230IDWRG4)
ডিজাইন নোট
Keep the analog input path short and place the ADC close to its source amplifier. Use a low-impedance, low-jitter clock and route clock and digital output returns away from the analog input and reference nets. Because the converter supports 30 MSPS, discontinuities, adjacent-source crosstalk, and switching return currents can affect sampling accuracy even when the parallel digital interface operates correctly.
Place the required bypass capacitors directly beside the analog and digital supply pins, and keep the 3.3 V distribution path sufficiently low in impedance. Provide clean power to the analog section and separate noisy digital return currents from the input reference node. Verify the converter's supply sequencing and power-down requirements in the manufacturer datasheet before using shutdown controls in a mixed-signal system.
Do not treat a family member with the same function as a drop-in replacement without checking its complete orderable suffix. In particular, the THS1230IDWRG4 uses a VQFN-48 package and therefore requires a different PCB footprint. For the THS1230IPW, compare the 28-pin assignments, temperature grade, electrical limits, and timing table before replacing the THS1230CPW in production.
The 12-bit parallel output creates twelve simultaneous data-transition paths at each conversion rate. Route these outputs consistently to the receiver, avoid stubs and unnecessary test pads, and provide a clear clock relationship between sampling and output capture. If routing area is constrained, use a nearby latch or capture FPGA rather than allowing long unmatched parallel buses to increase timing risk.
কমপ্লায়েন্স তথ্য
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for this exact orderable MPN. AEC-Q100 is not applicable because the THS1230CPW is a commercial-temperature converter rather than an automotive-qualified variant.