Texas Instruments

THS1230CPW - 12-Bit 30-MSPS Parallel ADC | Texas Instruments

N.º de pieza: THS1230CPW ✓ Activo
3.3 V Vdss 28-pin TSSOP Package
MOQ: 1 |

THS1230CPW Descripción general

Texas Instruments THS1230CPW is a 12-bit, 30-MSPS, single-channel pipelined analog-to-digital converter with parallel output and a 28-pin TSSOP package. It operates from a 3.3 V supply, accepts one analog input, and provides 0.0488% linearity error according to the product data. Its high-speed parallel interface makes the device suitable for capturing rapidly changing analog waveforms in communication, industrial measurement, and signal-processing systems.

An ADC is a data-converter IC that samples an analog voltage and converts it into a digital number. The THS1230 belongs to the pipelined ADC family, a multistage converter architecture that supports high sampling rates while providing a 12-bit output word. In the broader electronics hierarchy, it is an ADC, then a data converter, then a mixed-signal semiconductor used for measurement and signal acquisition.

The principal features of the THS1230CPW are its 12-bit resolution, 30 MSPS conversion rate, single analog input, parallel data output, and low-power 3.3 V operation. A 28-bit parallel word represents each conversion result. The pipelined architecture can introduce a conversion latency, so downstream logic should account for the timing relationship between sample acquisition and output data.

The device uses a proprietary conversion method and CMOS technology. Parallel output exposes the 12 result bits directly to digital circuitry instead of serializing them through a serial interface. This reduces output-data handling complexity at high sample rates, but it requires a PCB with sufficient routing space, controlled clock distribution, and careful treatment of digital return currents near the analog input and reference circuitry.

Typical uses include communications-channel digitization, industrial signal acquisition, waveform capture, closed-loop control, and digital oscilloscope or data-acquisition subsystems. Its single-channel architecture favors applications with one high-rate analog signal rather than simultaneous multichannel sampling. System designers should also allow suitable analog drive and source-impedance networks to preserve conversion accuracy at the operating sample rate.

A key design consideration is power and signal integrity. Place decoupling capacitance close to the supply pins, provide a low-impedance clock source, and route analog and digital return currents so switching activity does not disturb the sampled input. Verify the input range, reference arrangement, acquisition timing, and output latency against the manufacturer datasheet before finalizing the PCB and firmware.

This product page consolidates the THS1230CPW electrical identity, package information, sourcing path, family comparisons, and practical implementation guidance into one engineering reference. It also distinguishes verified drop-in family options from devices that require a package redesign.

Alternativas directas para THS1230CPW — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con THS1230CPW (mismo factor de forma y huella) — difiere en Input Type, AEC-Q100 Qualification, Architecture, Number of Channels, Operating Temperature Range.

Texas Instruments
Input Type: Differential / Single-Ended
Architecture: Pipelined
Number of Channels: 1
Comparar con THS1230CPW →
Texas Instruments
Input Type: Single analog input
AEC-Q100 Qualification: Not applicable
Architecture: Pipelined ADC
Comparar con THS1230CPW →

THS1230IPW

✅ Sustitución directa
Texas Instruments
📦 28-pin TSSOP
12 bit · 30 MSPS · 1 channel · Differential · 3.3 V · Pipelined ADC · 12-bit parallel · Single analog input

Consulte el precio

Ver hoja de datos →

THS1230CPW Valores máximos y características eléctricas

ADC Type Pipelined analog-to-digital converter
Resolución 12 bit
Frecuencia de muestreo 30 MSPS
Number of Channels 1 channel
Input Type 1 analog input
Output Interface 12-bit parallel
Tensión de alimentación 3.3 V
Linearity Error 0.0488%
Process Technology CMOS
Encapsulado 28-pin TSSOP
Package Type PDSO28
Tipo de montaje Surface mount
Rango de temperatura de funcionamiento 0°C to +70°C
Power-Down Function Yes
Estado RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

Guía de configuración de pines de THS1230CPW pdso28

Configuración de pines para THS1230CPW (encapsulado pdso28). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado pdso28 para THS1230CPW

No hay datos detallados de patillaje disponibles para THS1230CPW.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

THS1230CPW es adecuado para 6 aplicacións: Communications Channel Digitization, Industrial Waveform Acquisition, Closed-Loop Control Systems, Digital Oscilloscope Front End, Test and Measurement Signal Capture, Audio and Control Signal Analysis.

🌐

Communications Channel Digitization

The THS1230CPW fits communications-channel digitization because it samples one analog waveform at up to 30 MSPS and presents each 12-bit sample directly on a parallel bus. That interface allows an FPGA or capture logic to process samples without adding a serial deserializer. Place the converter close to the RF or IF conditioning stage, provide a low-jitter sampling clock, and keep digital output routing away from the analog input. The 3.3 V supply and 28-pin TSSOP package support compact mixed-signal boards, although the external analog bandwidth must be checked against the required signal bandwidth.

🏭

Industrial Waveform Acquisition

The THS1230CPW is suitable for industrial waveform acquisition when a rapid transient must be digitized at high resolution. Its 12-bit, 30 MSPS conversion capability captures 768 million sample decisions per second while allowing the host processor or FPGA to receive each result through a parallel interface. A practical design should use an analog front end with suitable gain and bandwidth, a low-impedance clock source, and separate analog and digital return paths. The single input also makes it straightforward to allocate one converter to each high-priority sensor channel.

🔧

Closed-Loop Control Systems

The THS1230CPW can serve as the feedback element in a closed-loop control system that must observe a fast analog control variable. Its 30 MSPS sampling rate provides substantially more frequent observations than a general-purpose slow ADC, while the 12-bit parallel result can feed a digital controller or FPGA without serial framing overhead. The design must account for pipeline latency and acquisition timing, and the front-end sensor or amplifier must drive the input consistently. Verify the input range and reference requirements in the manufacturer datasheet before closing the control loop.

📺

Digital Oscilloscope Front End

The THS1230CPW is appropriate for the acquisition front end of a digital oscilloscope or high-speed measurement instrument requiring parallel sample delivery. At 30 MSPS and 12 bits, it provides a useful balance between temporal resolution and amplitude detail, while its 28-pin TSSOP package supports compact instrument designs. A scope implementation should synchronize the sampling clock with the trigger system, buffer the parallel outputs where necessary, and isolate high-current processor and display circuitry from the analog input. Calibration also depends on the selected reference and input-conditioning circuitry.

📡

Test and Measurement Signal Capture

The THS1230CPW can convert repetitive or transient test signals into parallel digital data for analysis by FPGA or logic instrumentation. Its 30 MSPS rate supports sampling of higher-frequency behavior than typical general-purpose ADCs, and the 12-bit word provides 4096 numerical codes across the converter range. The acquisition chain should include controlled gain, input-range selection, and an anti-alias filter. Because the output is parallel, the receiving device must be positioned to avoid long data buses, or an intermediate latch should be used to preserve timing margin.

🎧

Audio and Control Signal Analysis

The THS1230CPW may be used in specialized audio or control-signal analysis systems that require faster sampling than conventional audio converters provide. A 30 MSPS sampling rate allows direct capture of substantially higher-frequency content, and the parallel output can feed real-time processing hardware. However, the analog input must be conditioned to the converter's permitted range, and the design should include appropriate anti-alias filtering. Clock jitter, source impedance, and return-path separation are especially important when extracting small signals from a mixed-signal control board.

Resumen de productos recomendados

THS1230IPW Texas Instruments Se usa en: Communications Channel Digitization, Industrial Waveform Acquisition, Closed-Loop Control Systems, Digital Oscilloscope Front End, Test and Measurement Signal Capture, Audio and Control Signal Analysis THS1230IDWRG4 Functionally similar family device requiring a different package Se usa en: Communications Channel Digitization, Industrial Waveform Acquisition, Closed-Loop Control Systems, Digital Oscilloscope Front End, Test and Measurement Signal Capture, Audio and Control Signal Analysis
What is the THS1230CPW?
The THS1230CPW is a single-channel, 12-bit, 30-MSPS pipelined ADC with a parallel output interface and a 28-pin TSSOP package. Texas Instruments describes it as a low-power 3.3 V analog-to-digital converter, making it appropriate for high-speed signal acquisition where a parallel data path is preferable to a serial interface. The manufacturer datasheet is the authoritative source for electrical limits and timing.
What are the key specifications of THS1230CPW that engineers should know?
The key THS1230CPW specifications are 12-bit resolution, a 30 MSPS sampling rate, one analog input, a 12-bit parallel output, and a 3.3 V supply. The converter uses a proprietary pipelined method and CMOS technology, with 0.0488% linearity error listed for the device. It is packaged in a 28-pin TSSOP, and the published operating-temperature range is 0°C to +70°C.
Where can I download the THS1230CPW datasheet PDF?
The THS1230CPW datasheet PDF is available through the Texas Instruments document linked on this page at https://media.digikey.com/pdf/Data%20Sheets/Texas%20Instruments%20PDFs/THS1230_Apr3_2009_ds.pdf. It covers the 3.3 V, 12-bit, 30-MSPS converter and should be used for pin assignments, timing, electrical characteristics, and application-circuit details before board release.
Where can I find the THS1230CPW pinout?
The THS1230CPW pinout is documented in the manufacturer datasheet and identifies the parallel digital outputs, analog and digital supplies, reference connections, clock, control, and power-down functions across the 28-pin TSSOP. Use the pin-description table and package drawing in that document when assigning PCB nets; do not infer pin functions from the connector position alone.
Is THS1230CPW suitable for high-speed waveform acquisition?
Yes, the THS1230CPW is suitable for high-speed waveform acquisition because it samples at 30 MSPS and returns each result as a 12-bit parallel word. That rate supports acquisition of substantially faster analog waveforms than a low-rate general-purpose ADC. The source impedance, front-end bandwidth, clock jitter, and PCB signal integrity must still be designed for the required signal bandwidth.
What is the difference between THS1230CPW and THS1230IPW?
The THS1230CPW and THS1230IPW are members of the same THS1230 family, but their exact orderable temperature and packaging options should be checked individually. The THS1230CPW is identified as a 28-TSSOP device, while the THS1230IPW is a family variant listed in comparison results. Confirm the complete suffix, temperature grade, pinout, and lifecycle status against the manufacturer datasheet before substitution.
Is THS1230CPW pin-compatible with THS1230IDWRG4?
No, the THS1230IDWRG4 is not a pin-compatible drop-in replacement for the THS1230CPW because the listed package is VQFN-48 rather than 28-pin TSSOP. The change in lead count and footprint requires a PCB redesign. It may still be useful as a functionally similar family option when a new layout is acceptable and its electrical specifications meet the application.
What is the best drop-in replacement for THS1230CPW?
The THS1230IPW is the closest supported same-family option identified for a same-package replacement review, but it should not be installed without checking its complete ordering code and temperature grade. No additional drop-in alternatives with a verified 28-pin TSSOP footprint and confirmed electrical compatibility were found. Use the manufacturer cross-reference search and compare the pin and timing tables before approving a replacement.
What can replace THS1230CPW without changing the PCB?
A no-PCB-change replacement must use the same 28-pin TSSOP footprint and preserve the required pin functions, 3.3 V supply, 12-bit parallel interface, and 30 MSPS timing. The THS1230IPW is the principal family candidate to investigate because it appears in a direct THS1230 comparison, but its exact suffix and ratings must be verified. The THS1230IDWRG4 cannot replace it without a layout change.
When should I choose THS1230CPW over a serial-output ADC?
Choose the THS1230CPW when the receiving FPGA or logic device can accept a 12-bit parallel word directly and the system benefits from avoiding serial-data serialization overhead. It is particularly useful at 30 MSPS, where parallel capture can simplify timing and throughput. A serial ADC may be preferable when connector count, PCB routing area, clocking, or system-level serialization is more restrictive.
Is THS1230IPW the same as THS1230CPW?
No, the THS1230IPW should not be treated as automatically identical to the THS1230CPW despite their common family name. Orderable suffixes can indicate different temperature grades, packaging, or qualification conditions. The THS1230CPW is specified as a 28-pin TSSOP device; verify the THS1230IPW package, temperature range, electrical limits, and lifecycle status before treating it as interchangeable.
Where can I buy THS1230CPW online?
Use the Request a Quote form on this page to request current THS1230CPW availability, lead time, and a quotation for the exact 28-pin TSSOP package. The suffix matters, so quote THS1230CPW precisely rather than accepting an unverified substitute. Current inventory and commercial terms can change and should be confirmed through the form before placing an order.
What is the price of THS1230CPW?
Current commercial pricing for THS1230CPW is handled through the Request a Quote form on this page. The form allows a request for the exact MPN and package without presenting a static unit price that may be obsolete. Supply the required quantity, delivery location, and packaging preference so the quotation reflects the intended order.
What is the lead time for THS1230CPW?
The current lead time for THS1230CPW should be requested through the Request a Quote form on this page. Lead time can depend on quantity, tube packaging, and current component availability. The THS1230CPW listing indicates an active sourcing path, so the form is the appropriate place to confirm a firm delivery commitment for production quantities.
Is THS1230CPW in stock?
The THS1230CPW is listed as a purchasable active part, but stock quantity and allocation should be confirmed through the Request a Quote form on this page. The search result uses a promotional availability statement and does not establish a guaranteed quantity for every order. Ask for the current on-hand quantity, factory tube quantity, and expected dispatch timing.
How should the THS1230CPW power and analog layout be designed?
Place supply decoupling close to the device, use a low-impedance clock connection, and keep analog-input and reference routing away from high-current digital return paths. Because the ADC supports 30 MSPS, trace discontinuities and crosstalk can affect conversion performance even when the digital interface is correct. Follow the reference-layout guidance in the manufacturer datasheet and verify the completed design with the intended analog source.

Datos de referencia de ingeniería para THS1230CPW — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the THS1230CPW when the design needs one analog channel sampled at up to 30 MSPS and can receive 12-bit parallel data directly. It is a strong fit for FPGA-based communications, industrial waveform capture, and high-speed test systems where avoiding serial deserialization simplifies timing. Review the THS1230IPW when a same-family, 28-pin TSSOP device is needed, but confirm its exact temperature grade, suffix, electrical limits, and lifecycle status before approving it as a drop-in replacement. The THS1230IDWRG4 is useful only in a redesigned converter stage because its VQFN-48 package is incompatible with the THS1230CPW footprint. Regardless of variant, validate the analog input range, reference arrangement, pipeline timing, source impedance, and power sequencing against the manufacturer datasheet before release.

Comparación con alternativas

Parámetro Este producto THS1230IPW
Package 28-pin TSSOP 28-pin TSSOP
Brand Texas Instruments Texas Instruments
Resolution 12 bit 12 bit
Sampling Rate 30 MSPS 30 MSPS
Number of Channels 1 channel 1 channel
Supply Voltage 3.3 V 3.3 V
Output Interface 12-bit parallel 12-bit parallel
Converter Architecture Pipelined, proprietary method Pipelined, proprietary method
Power-Down Function Yes Yes

Diferenciadores clave

  • High-speed parallel conversion (frente a THS1230IPW)
  • Single 3.3 V supply architecture (frente a THS1230IPW)
  • Same-footprint family sourcing option (frente a THS1230IDWRG4)

Notas de diseño

Keep the analog input path short and place the ADC close to its source amplifier. Use a low-impedance, low-jitter clock and route clock and digital output returns away from the analog input and reference nets. Because the converter supports 30 MSPS, discontinuities, adjacent-source crosstalk, and switching return currents can affect sampling accuracy even when the parallel digital interface operates correctly.

Place the required bypass capacitors directly beside the analog and digital supply pins, and keep the 3.3 V distribution path sufficiently low in impedance. Provide clean power to the analog section and separate noisy digital return currents from the input reference node. Verify the converter's supply sequencing and power-down requirements in the manufacturer datasheet before using shutdown controls in a mixed-signal system.

Do not treat a family member with the same function as a drop-in replacement without checking its complete orderable suffix. In particular, the THS1230IDWRG4 uses a VQFN-48 package and therefore requires a different PCB footprint. For the THS1230IPW, compare the 28-pin assignments, temperature grade, electrical limits, and timing table before replacing the THS1230CPW in production.

The 12-bit parallel output creates twelve simultaneous data-transition paths at each conversion rate. Route these outputs consistently to the receiver, avoid stubs and unnecessary test pads, and provide a clear clock relationship between sampling and output capture. If routing area is constrained, use a nearby latch or capture FPGA rather than allowing long unmatched parallel buses to increase timing risk.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified for this exact orderable MPN. AEC-Q100 is not applicable because the THS1230CPW is a commercial-temperature converter rather than an automotive-qualified variant.

Datos verificados el: 2026-11-20 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

THS1230CPW datasheet THS1230CPW pinout THS1230CPW datasheet pdf THS1230CPW equivalent THS1230CPW replacement THS1230CPW drop-in substitute THS1230CPW price THS1230CPW stock Texas Instruments THS1230CPW THS1230CPW vs THS1230IPW THS1230 12-bit 30 MSPS ADC THS1230 28-pin TSSOP pinout THS1230CPW signal acquisition THS1230CPW schematic

Componentes & términos relacionados

Texas Instruments THS1230CPW THS1230IPW THS1230IDWRG4 analog-to-digital converter ADC pipelined ADC data converter mixed-signal IC 12-bit resolution 30 MSPS 3.3 V power supply parallel output interface 28-pin TSSOP TSSOP family surface-mount package CMOS proprietary conversion method waveform acquisition communications digitization industrial signal acquisition closed-loop control digital oscilloscope RoHS REACH
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ