Texas Instruments

THS7530PWP - 300 MHz Fully Differential VGA | Texas Instruments

MPN: THS7530PWP ✓ সক্রিয়
5.5 V Vdss 37 mA Id 14-pin HTSSOP (PWP) with exposed pad Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

THS7530PWP সারাংশ

The Texas Instruments THS7530PWP is a fully differential, continuously variable gain amplifier featuring a 300 MHz bandwidth, DC-coupled operation, and a 14-pin HTSSOP package with an exposed thermal pad. It accepts a single-ended or differential supply and combines high-impedance differential inputs, low-impedance differential outputs, voltage-controlled gain, output common-mode control, and output voltage clamping.

A variable gain amplifier, or VGA, is an amplifier whose gain changes under electronic control. A VGA belongs to the broader family of amplifiers, which in turn forms part of the analog and mixed-signal semiconductor hierarchy. Unlike a fixed-gain amplifier, a VGA allows a receiver, imaging system, or instrumentation channel to vary signal amplitude without changing the surrounding circuit topology. The fully differential architecture preserves a balanced signal path and reduces sensitivity to common-mode disturbances.

Key features include a 300 MHz small-signal bandwidth, voltage-controlled continuous gain adjustment, differential input and differential output operation, and separate control of output common mode. The device operates from a single 5.5 V supply or from split supplies of ±2.75 V. Its 14-pin HTSSOP package exposes a thermal pad for improved heat dissipation, and the specified operating temperature range is -40 °C to 85 °C.

Internally, the THS7530 uses Texas Instruments' BiCom III silicon-germanium complementary bipolar process. That process supports the high-speed operation required by the device while preserving DC coupling and low-impedance differential outputs. The gain-control and common-mode inputs are high-bandwidth control paths, so their routing and impedance matter as much as the signal inputs when system settling time is important.

Typical uses include ultrasound and medical imaging front ends, communications receivers, instrumentation amplifiers, oscilloscope and test-equipment input chains, and other wideband analog systems that require adjustable attenuation or gain. Differential signaling is particularly useful when the source produces a small differential voltage across a common-mode range that a single-ended amplifier would not accommodate cleanly.

For PCB design, use the exposed thermal pad as a heat-spreading and low-inductance connection rather than leaving it electrically unconnected. Place input, output, gain-control, and common-mode routing away from high-current switching nodes. Terminate differential pairs symmetrically and follow the pin-description table in the manufacturer datasheet when assigning tracks and ground connections.

This page combines the manufacturer device information, orderable-package details, practical PCB guidance, and a constrained drop-in comparison for engineers who need a 300 MHz fully differential VGA in the HTSSOP PWP footprint. Use the Request a Quote form on this page for current commercial availability, minimum order quantity, and lead-time confirmation.

এর জন্য ড্রপ-ইন বিকল্প THS7530PWP — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

THS7530QPWPRQ1

✅ ড্রপ-ইন
📦 HTSSOP-14 (PWP) with exposed pad
Automotive-qualified Q1 ordering variant; bandwidth remains 300 MHz, with no quantified performance delta stated in the verified listing

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

THS7530PWPRG4

✅ ড্রপ-ইন
📦 HTSSOP-14 (PWP) with exposed pad
RoHS/green ordering variant with the same 14-pin HTSSOP footprint and 300 MHz amplifier function

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

THS7530PWPG4

✅ ড্রপ-ইন
📦 HTSSOP-14 (PWP) with exposed pad
Green/RoHS ordering variant with the same 14-pin HTSSOP footprint and 300 MHz amplifier function

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

THS7530PWP সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Device Type Fully differential, continuously variable gain amplifier
Amplifier Configuration 1 circuit, differential input and differential output
Small-Signal Bandwidth 300 MHz
Gain Control Continuous, voltage controlled
Signal Coupling DC-coupled
Single-Supply Range 5.5 V
Split-Supply Range ±2.75 V
Input Impedance High impedance, differential
Output Impedance Low impedance, differential
Output Common-Mode Control Yes
Output Voltage Clamp Yes
Process Technology BiCom III SiGe complementary bipolar
অপারেটিং তাপমাত্রার পরিসর -40 °C to 85 °C
প্যাকেজ 14-pin HTSSOP (PWP) with exposed pad
মাউন্টিং টাইপ Surface mount
সাপ্লাই কারেন্ট 37 mA
RoHS স্ট্যাটাস RoHS compliant

THS7530PWP 14-pin htssop (pwp) with exposed pad পিন কনফিগারেশন গাইড

THS7530PWP (14-pin htssop (pwp) with exposed pad প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

THS7530PWP-এর জন্য 14-pin htssop (pwp) with exposed pad প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি THS7530PWP.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

THS7530PWP এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Medical and Ultrasound Imaging Front Ends, Communications Receiver Signal Conditioning, Precision Instrumentation and Measurement, Oscilloscope and Test Equipment Input, Optical and Sensor Interface Amplification, Automotive Vision and Radar Electronics.

💊

Medical and Ultrasound Imaging Front Ends

The THS7530PWP fits high-speed imaging channels where signal amplitude varies across the scanned field and must be normalized without swapping external attenuators. Its 300 MHz bandwidth preserves the temporal detail needed by ultrasonic and medical imaging systems, while the continuously variable gain control allows a controller to adjust amplitude in real time. The fully differential input and output architecture supports balanced source and downstream converter connections. A practical trade-off is that a wideband VGA is not the lowest-power choice: the device draws 37 mA and dissipates heat through its exposed pad, so the PCB must provide a thermal path and the system must control signal swing to avoid unnecessary dissipation.

🌐

Communications Receiver Signal Conditioning

The THS7530PWP is applicable to wideband receiver chains that require continuous gain adjustment close to the antenna or sensor interface. Its 300 MHz bandwidth accommodates high-rate intermediate-frequency or baseband signals, and the differential signal path helps reject common-mode noise picked up between the source and amplifier. Voltage-controlled gain also supports automatic gain control, distance compensation, or calibration loops. The system designer must verify the gain-control bandwidth against the required loop settling time and keep the control trace short, because a long control route can degrade adjustment speed even when the main signal bandwidth is adequate.

🏭

Precision Instrumentation and Measurement

The THS7530PWP supports instrumentation channels that compare small sensor outputs against a large common-mode range and need programmable attenuation before conversion or comparison. Its DC-coupled differential input preserves low-frequency information that an AC-coupled amplifier would lose, while the 300 MHz bandwidth leaves margin for fast transients and test fixtures. The low-impedance differential output can drive downstream circuitry through controlled routing, and the common-mode control adds flexibility in system-level signaling. Designers should confirm the gain-control input range and settling behavior against the required measurement sequence, because continuous gain does not imply instantaneous correction.

🖥️

Oscilloscope and Test Equipment Input

The THS7530PWP can serve as an adjustable front-end element in oscilloscopes, signal analyzers, and automated test systems that must handle inputs spanning widely different amplitudes. The 300 MHz bandwidth supports high-speed edge capture, while continuous gain control allows a single analog path to replace multiple switched attenuator positions. Differential routing preserves signal integrity when the source is balanced, and the exposed-pad HTSSOP package provides a practical thermal path in compact instrumentation. Validation should include gain accuracy, control settling, output clamping, and thermal rise under the highest expected input condition; these details determine whether calibration can correct amplitude without excessive correction bandwidth.

🧩

Optical and Sensor Interface Amplification

The THS7530PWP is suitable for sensor-interface amplifiers where a weak differential signal is followed by a larger processing stage and gain must track source amplitude or calibration conditions. Its 300 MHz bandwidth allows the same amplifier to handle sensor signals with meaningful edge content, while DC coupling preserves slow baseline information. The fully differential topology is advantageous when the sensor and cable introduce common-mode noise. To obtain predictable performance, use balanced source impedances, short input traces, and a symmetric output arrangement. Also verify that the gain-control range covers the attenuation required without pushing the amplifier into saturation or an unstable operating region.

🚗

Automotive Vision and Radar Electronics

The automotive-qualified THS7530QPWPRQ1 ordering variant is the relevant option for automotive electronics, while the standard THS7530PWP serves industrial and commercial versions of the same high-speed VGA function. Both use the 14-pin HTSSOP PWP footprint and support a 300 MHz differential signal path, making the architecture relevant to camera, radar, and high-speed interface conditioning where adjustable gain helps normalize changing signal levels. Automotive designs require careful review of qualification documentation, temperature expectations, transient conditions, and supply sourcing. The exposed pad remains thermally important because the 37 mA supply current and output-drive dissipation both contribute to junction heating.

What is the THS7530PWP?
The THS7530PWP is a Texas Instruments fully differential, continuously variable gain amplifier with a 300 MHz bandwidth. It provides DC-coupled high-impedance differential inputs, low-impedance differential outputs, voltage-controlled gain, output common-mode control, and output voltage clamping in a 14-pin HTSSOP package. According to the THS7530 manufacturer datasheet, the device is intended for instrumentation systems that require adjustable signal gain at high frequency.
What is the bandwidth of the THS7530PWP?
The THS7530PWP has a 300 MHz bandwidth and supports high-speed gain adjustment through a wideband voltage-controlled gain path. The manufacturer identifies it as a high-speed, fully differential, continuously variable gain amplifier implemented with the BiCom III SiGe complementary bipolar process. This bandwidth makes it suitable for wideband instrumentation, communications, imaging, and test-and-measurement signal chains.
What supply voltage does the THS7530PWP require?
The THS7530PWP can operate from a single 5.5 V supply or from split supplies of ±2.75 V. Its differential signal path remains DC-coupled in both configurations. According to the THS7530 manufacturer datasheet, the single- and split-supply options allow the amplifier to fit systems with different rail structures while retaining fully differential operation.
Where can I download the THS7530PWP datasheet PDF?
The official THS7530PWP datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ths7530.pdf. The device page at https://www.ti.com/product/THS7530 provides ordering information, part details, and supporting documentation. Use the pin-description table and electrical-characteristics tables in the manufacturer datasheet when assigning PCB nets or designing the gain-control network.
Where can I find the THS7530PWP pinout?
The THS7530PWP pinout is defined in the pin-configuration section of the THS7530 manufacturer datasheet. The package is a 14-pin HTSSOP designation PWP with an exposed thermal pad, so the exposed pad must be identified separately from the 14 numbered terminals. Use the pin-description table for exact terminal names, control functions, and the recommended pad connection rather than relying on a generic package drawing.
What can replace the THS7530PWP?
The closest confirmed same-family replacement is the automotive-qualified THS7530QPWPRQ1, which uses the same 14-pin HTSSOP PWP footprint and retains the 300 MHz variable-gain amplifier function. Confirm ordering codes, qualification requirements, and control-pin behavior against the manufacturer datasheet before substitution. The THS7530PWPR and THS7530PWPRG4 ordering variants are related but add less functional differentiation than a distinct drop-in device.
Is THS7530QPWPRQ1 a drop-in replacement for THS7530PWP?
The THS7530QPWPRQ1 is the strongest confirmed drop-in candidate because it shares the 14-pin HTSSOP PWP package and the 300 MHz fully differential variable-gain amplifier function. The Q1 designation indicates an automotive-qualified ordering option, so verify AEC-Q100 documentation and your application requirements. This comparison assumes that the electrical pin functions and control interface match the THS7530 family datasheet.
When should I choose THS7530PWP over a fixed-gain amplifier?
Choose the THS7530PWP when the receiver must adjust gain continuously through a control voltage while preserving a fully differential 300 MHz signal path. A fixed-gain amplifier is simpler and may cost less, but it cannot provide the same continuous gain adjustment or dedicated output common-mode control. The THS7530PWP is appropriate when dynamic range, calibration, ranging, or signal normalization must be handled inside the analog channel.
Is the THS7530PWP suitable for medical imaging applications?
The THS7530PWP is suitable for high-speed analog front ends that need adjustable gain, including medical and ultrasound imaging signal chains. Its 300 MHz bandwidth and fully differential architecture support wideband amplification with balanced signal routing. Because the exposed pad conducts heat, use the package thermal guidance in the manufacturer datasheet and verify the temperature rise at the maximum expected output swing and load.
What are the key specifications of THS7530PWP that engineers should know?
The key THS7530PWP specifications are a 300 MHz bandwidth, continuous voltage-controlled gain, DC-coupled fully differential I/O, 5.5 V single-supply or ±2.75 V split-supply operation, and a -40 °C to 85 °C temperature range. It also provides output common-mode control, output voltage clamping, and a 37 mA supply current. The 14-pin HTSSOP PWP package includes an exposed pad for heat removal.
How should the THS7530PWP exposed pad be handled on a PCB?
The THS7530PWP exposed pad should be used as a thermal and low-impedance connection according to the land pattern and electrical guidance in the manufacturer datasheet. Connect it with multiple thermal vias to the appropriate plane, and do not treat it as an unused mechanical feature. Keep the pad connection away from high-current switching paths and maintain a short, symmetric return path beneath the device.
Does the THS7530PWP need a single-ended or differential input?
The THS7530PWP is designed around a fully differential signal path and accepts high-impedance differential inputs while delivering low-impedance differential outputs. Converting a single-ended source into differential signals generally requires a separate input driver or transformer. Use symmetric source impedances and matched routing to preserve balance across the usable frequency range.
What is the difference between THS7530PWP and THS7530QPWPRQ1?
The THS7530PWP and THS7530QPWPRQ1 both provide a 300 MHz fully differential continuously variable gain amplifier in the 14-pin HTSSOP PWP footprint. The principal documented distinction is the Q1 automotive ordering qualification for THS7530QPWPRQ1. Confirm temperature grade, qualification status, and exact terminal functions in the TI product documentation before treating either orderable part as interchangeable.
Where can I buy THS7530PWP online?
Use the Request a Quote form on this page to request current THS7530PWP pricing, stock, minimum order quantity, and lead time. Quote requests are handled directly through the page rather than through a static price table, so the response reflects current channel conditions. For production planning, include the required package, operating temperature grade, quantity, and target shipment date.
Is the THS7530PWP currently in stock?
Current inventory for THS7530PWP changes with order volume and market conditions, so stock should be confirmed through the Request a Quote form on this page. Provide your required quantity, target shipment date, and whether reel or tube presentation is acceptable. The Request a Quote response is the appropriate source for a current availability commitment and lead-time confirmation.
How much does the THS7530PWP cost?
The current commercial price for THS7530PWP depends on order quantity, package form, and supply conditions. Submit a request through the Request a Quote form on this page to receive a current quotation for the exact MPN and quantity. For cost engineering, request quantity breaks that cover prototype, pilot-production, and scheduled high-volume demand.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা THS7530PWP — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the THS7530PWP when the design needs continuous voltage-controlled gain in a fully differential 300 MHz signal path, especially for instrumentation, communications, imaging, or test-and-measurement channels. It is preferable to a fixed-gain amplifier when signal amplitude must change during operation, since the control can support ranging, calibration, or automatic gain control without switching external gain stages. The THS7530QPWPRQ1 is the preferred option when automotive qualification is required. The THS7530PWPRG4 and THS7530PWPG4 ordering variants are practical when purchasing or regulatory documentation specifically calls for those codes, but they provide less functional differentiation than the Q1 variant. In every case, verify the gain range, control settling, input/output swing, thermal rise, and exact exposed-pad connection in the manufacturer datasheet before committing to a PCB revision.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য THS7530QPWPRQ1 THS7530PWPRG4 THS7530PWPG4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package HTSSOP-14 (PWP) with exposed pad HTSSOP-14 (PWP) with exposed pad HTSSOP-14 (PWP) with exposed pad HTSSOP-14 (PWP) with exposed pad
Device Function Fully differential, continuously variable gain amplifier Fully differential, continuously variable gain amplifier Fully differential, continuously variable gain amplifier Fully differential, continuously variable gain amplifier
Bandwidth 300 MHz 300 MHz 300 MHz 300 MHz
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit
Supply Voltage 5.5 V single or ±2.75 V split supply 5.5 V single or ±2.75 V split supply 5.5 V single or ±2.75 V split supply 5.5 V single or ±2.75 V split supply
Automotive Qualification Not indicated Automotive-qualified Q1 ordering option Not indicated Not indicated
Signal Coupling DC-coupled DC-coupled DC-coupled DC-coupled
Output Common-Mode Control Yes Yes Yes Yes

মূল পার্থক্যসমূহ

  • Continuously adjustable gain in a fully differential high-speed amplifier (বনামTHS7530QPWPRQ1)
  • Wideband gain and common-mode control within one device (বনামTHS7530PWPRG4)
  • Single-supply and split-supply operation (বনামTHS7530PWPG4)

ডিজাইন নোট

Follow the PWP land pattern in the manufacturer datasheet and connect the exposed pad with multiple thermal vias to a solid plane. Treat the pad as an electrical and thermal feature, not as unused package area. Keep input, output, gain-control, and common-mode routes short, and avoid routing them beside switching-node or high-current return paths. Symmetrical routing is especially important for the differential input and output pairs because unmatched geometry can degrade common-mode rejection and disturb gain or phase performance.

Give the gain-control and output common-mode inputs dedicated, low-impedance routing. These are wideband control paths, so excessive trace resistance, capacitance, or nearby high-current switching edges can slow control settling and introduce coupling into the signal channel. Use a compact control network and provide a quiet return beneath the device. If the control source is remote, buffer it close to the amplifier rather than extending a long analog control trace across the board.

Estimated: using the stated 37 mA supply current at 5.5 V, supply power is approximately 0.204 W before output-load dissipation. Junction temperature will additionally rise with output drive and signal swing, so calculate the complete worst-case dissipation rather than using supply power alone. Verify the result against the manufacturer thermal information and the actual PCB copper area. Increase exposed-pad copper and via count if the estimated junction temperature approaches the device limit.

Do not treat the 300 MHz small-signal bandwidth as permission to route the differential signal with arbitrary long traces or large impedance discontinuities. Terminate the source and destination impedances consistently, maintain symmetric spacing between differential pairs, and place return vias alongside signal vias where the stackup permits. Also confirm that the gain-control voltage remains inside its operating region during startup and power-sequencing transients; otherwise the amplifier may settle incorrectly or enter an unintended operating condition.

কমপ্লায়েন্স তথ্য

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

RoHS-compliant ordering variants are identified for the THS7530 family. The standard THS7530PWP is not identified as an automotive-qualified ordering code; use THS7530QPWPRQ1 when automotive qualification is required. REACH, halogen-free, lead-free, and conflict-minerals declarations are not established by the available product information.

ডেটা যাচাই করা হয়েছে: 2026-11-20 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

THS7530PWP datasheet THS7530PWP pinout THS7530PWP datasheet pdf Texas Instruments THS7530PWP THS7530PWP 300 MHz VGA THS7530PWP HTSSOP-14 THS7530PWP drop-in replacement THS7530PWP vs THS7530QPWPRQ1 THS7530PWP medical imaging amplifier THS7530PWP instrumentation front end THS7530PWP equivalent THS7530PWP price THS7530PWP stock THS7530PWP exposed pad layout THS7530 differential variable gain amplifier

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments THS7530PWP THS7530 THS7530QPWPRQ1 THS7530PWPRG4 THS7530PWPG4 variable gain amplifier VGA fully differential amplifier differential amplifier voltage-controlled gain common-mode rejection ratio DC-coupled amplifier BiCom III silicon-germanium SiGe complementary bipolar process 300 MHz bandwidth HTSSOP-14 PWP package exposed thermal pad surface mount SMD RoHS medical imaging
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন