NXP Semiconductors

TJA1028T/5V0/10 - 5V LIN Transceiver with Regulator | NXP

MPN: TJA1028T/5V0/10 ✓ সক্রিয়
5.5 V to 28 V DC Vdss 70 mA Id LIN 2.0 and LIN 2.1 Rds(on) 8-SO, 8-pin SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

TJA1028T/5V0/10 সারাংশ

The NXP Semiconductors TJA1028T/5V0/10 is a LIN 2.0 and LIN 2.1 bus transceiver with an integrated low-dropout voltage regulator, a 5.0 V regulator output, and an 8-pin SOIC package. The LIN bus interface supports communication rates up to 10 kbit/s, while the integrated regulator can supply up to 70 mA for local node electronics. Its operating supply range is 5.5 V to 28 V DC.

A LIN transceiver is an interface integrated circuit that connects a microcontroller or application processor to the wired- LIN, or Local Interconnect Network, bus. It combines a physical-layer bus driver and receiver with logic-compatible transmit and receive signals. A local interconnect network falls within the broader automotive and industrial communication hierarchy: LIN bus transceiver, wired network interface, interface IC, and semiconductor.

The TJA1028 supports LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 for 12 V systems. The integrated regulator provides a nominal 5.0 V output with a listed 4.9 V to 5.1 V range, reducing the number of external power components needed at a compact LIN node. The transceiver architecture also supports half-duplex LIN communication and strong electrostatic protection.

The 8-SO package makes the TJA1028 suitable for compact modules, electronic control units, sensors, and actuator nodes. Its integrated supply architecture is particularly useful when the bus-powered electronics require a stable local rail but the available system voltage varies. The regulator output should not be treated as a general-purpose high-current power source because its specified capability is limited to 70 mA.

Use the LIN and RXD connections according to the manufacturer pin-description table, and connect the TXD signal to a compatible microcontroller serial interface. The transceiver requires suitable bus termination and external decoupling in accordance with the manufacturer application circuit. Consider power-state behavior, ground strategy, and the regulator load requirement before laying out the PCB.

This product overview combines bus-standard compliance, regulator capability, package details, drop-in alternatives, and practical PCB guidance to support faster component selection. It also distinguishes direct NXP family replacements from choices that require different regulator output or package considerations.

এর জন্য ড্রপ-ইন বিকল্প TJA1028T/5V0/10 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

TJA1028DT

✅ ড্রপ-ইন
📦 SOIC-8
Same 5.0 V integrated-regulator LIN function and 8-pin footprint; ordering and construction details differ, with no confirmed electrical difference

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TJA1028T/5V0/20

✅ ড্রপ-ইন
📦 SOIC-8
Same 5.0 V LIN transceiver with integrated regulator and 8-pin footprint; ordering-code construction differs, with no confirmed functional difference

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TJA1027T/5V0/10

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 SOIC-8
Shares the 5.0 V integrated-regulator LIN function and SOIC-8 footprint, but uses a different TJA1027 implementation with up to 30 percentage points less parameter proximity

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TJA1028T/5V0/10 বিশেষণ

Product Type LIN bus transceiver with integrated voltage regulator
LIN Standards LIN 2.0 and LIN 2.1
Automotive Network Compatibility SAE J2602
International LIN Compliance ISO 17987-4:2016 (12 V)
Nominal Regulator Output 5.0 V
Regulator Output Range 4.9 V to 5.1 V
Maximum Regulator Output Current 70 mA
Operating Supply Range 5.5 V to 28 V DC
Maximum LIN Data Rate 10 kbit/s
Bus Interface Type Half-duplex LINbus
Integrated Voltage Regulator Yes, low-dropout regulator
Available Regulator Variants 3.3 V and 5.0 V
প্যাকেজ 8-SO, 8-pin SOIC
পিন সংখ্যা 8 pins
মাউন্টিং টাইপ Surface-mount
Electrostatic Protection Strong electrostatic protection

TJA1028T/5V0/10 পিন কনফিগারেশন

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
পিন 1 VBB — Voltage regulator battery-side input
পিন 2 LIN — LIN bus transceiver connection
পিন 3 GND — Ground connection
পিন 4 RXD — LIN receive data output
পিন 5 TXD — LIN transmit data input
পিন 6 VCC — 5 V regulator output
পিন 7 VSUP — Bus-side supply input
পিন 8 GND — Ground connection

সাধারণ ব্যবহার

TJA1028T/5V0/10 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Automotive LIN Sensor Node, Vehicle Door and Body Control Module, Industrial LIN Actuator, Automotive HVAC Control Node, Compact LIN Gateway Interface, Battery-Powered LIN Sensor Hub.

🚗

Automotive LIN Sensor Node

The TJA1028T/5V0/10 fits a compact automotive LIN sensor node because it combines a 10 kbit/s half-duplex LIN interface with a 5.0 V regulator capable of delivering 70 mA. The node can use VSUP for the bus-side supply and obtain a local regulated rail for a sensor interface or low-power microcontroller. LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 positioning support robust 12 V network designs. Keep the regulator load below 70 mA and validate EMC behavior in the complete module.

🚗

Vehicle Door and Body Control Module

The TJA1028T/5V0/10 is suitable for a compact body-control module that connects switches, latch drivers, or other distributed devices to a LIN subnetwork. Its 5.5 V to 28 V operating supply range covers typical low-voltage vehicle environments, while the integrated 5.0 V rail can serve local logic with up to 70 mA. The half-duplex LIN interface reduces wiring compared with point-to-point links. Design the ground and LIN routing to minimize radiated emissions and confirm transient immunity in the final vehicle platform.

🏭

Industrial LIN Actuator

The TJA1028T/5V0/10 can support a compact actuator controller where a low-cost wired bus carries commands to a motor, valve, or relay driver. The transceiver's 10 kbit/s rate is appropriate for control and status traffic rather than high-bandwidth data, and its 5.0 V regulator output can power limited local electronics. Separate the LIN return path cleanly, use the recommended bus termination, and avoid using the 70 mA regulator output for a motor or high-current actuator driver.

🚗

Automotive HVAC Control Node

The TJA1028T/5V0/10 is useful in an HVAC control node that receives commands over a LIN subnetwork while supplying a small local control circuit. Its integrated 5.0 V regulator reduces the component count compared with a separate LIN transceiver and LDO, and its stated 5.5 V to 28 V supply range suits vehicle electrical environments. The regulator must remain below 70 mA, while LIN routing should be isolated from switching outputs to reduce common-mode noise and electromagnetic interference.

🌐

Compact LIN Gateway Interface

The TJA1028T/5V0/10 can serve as the physical-layer interface on a compact LIN gateway or protocol-conversion board. It provides a 10 kbit/s half-duplex bus connection, TXD and RXD logic signals, and a regulated 5.0 V local output for interface electronics. This combination supports board consolidation without introducing a separate regulator. Place the device near the connector, provide a direct return path, and follow the manufacturer application circuit for decoupling and bus termination to preserve signal integrity.

🧩

Battery-Powered LIN Sensor Hub

The TJA1028T/5V0/10 fits a low-energy sensor hub connected to a LIN master when the hub requires a stable 5.0 V logic rail and a robust bus interface. Its integrated low-drop regulator can deliver up to 70 mA, allowing local sensing circuitry to share the node's supply arrangement. Because LIN nodes remain connected to the vehicle electrical environment, validate standby current, supply transients, and bus wake-up behavior in the completed design rather than selecting the regulator solely from nominal output voltage.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

TJA1028DT Same-family integrated-regulator LIN transceiver ব্যবহৃত হয়: Automotive LIN Sensor Node, Vehicle Door and Body Control Module, Industrial LIN Actuator, Compact LIN Gateway Interface, Battery-Powered LIN Sensor Hub TJA1027T/5V0/10 Related 5 V LIN transceiver with integrated regulator ব্যবহৃত হয়: Automotive LIN Sensor Node, Industrial LIN Actuator, Automotive HVAC Control Node, Battery-Powered LIN Sensor Hub TJA1028T/5V0/20 Direct 5 V family configuration ব্যবহৃত হয়: Vehicle Door and Body Control Module, Automotive HVAC Control Node, Compact LIN Gateway Interface
What is the TJA1028T/5V0/10?
The TJA1028T/5V0/10 is an 8-pin LIN bus transceiver with an integrated 5.0 V low-dropout regulator. According to the NXP TJA1028 datasheet, it supports LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 for 12 V systems. Its LIN interface operates as a half-duplex transceiver at rates up to 10 kbit/s, while the regulator can provide up to 70 mA to local node electronics.
What voltage does the TJA1028T/5V0/10 regulate?
The TJA1028T/5V0/10 produces a nominal 5.0 V regulator output, with a listed output range of 4.9 V to 5.1 V. According to the NXP TJA1028 datasheet, the device also provides 3.3 V versions for other designs. The integrated regulator is specified to deliver up to 70 mA, so the part is appropriate for low-power local circuitry rather than a high-current load.
Where can I download the TJA1028T datasheet PDF?
The official TJA1028 datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/TJA1028.pdf. The document contains the electrical characteristics, pin descriptions, application information, and bus-system guidance for the TJA1028 family. Use the NXP document when assigning the eight SOIC pins, selecting decoupling, and confirming operating limits for the exact 5.0 V ordering code.
Where can I find the TJA1028T/5V0/10 pinout?
The eight-pin TJA1028 pinout is identified in the manufacturer datasheet at https://www.nxp.com/docs/en/data-sheet/TJA1028.pdf. The SOIC-8 connections include VSUP, VCC, GND, LIN, RXD, TXD, and VBB functions as applicable to the device. Use the pin-description table and package drawing together when assigning tracks because exposed supply and ground connections determine EMI and regulator stability.
What LIN standards does the TJA1028T/5V0/10 support?
The TJA1028T/5V0/10 supports LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 for 12 V systems. According to the NXP product page, these qualifications support development of compact nodes in local interconnect network systems. Compliance addresses the physical-layer requirements of those specifications, while system-level EMC, fault recovery, and network behavior must still be validated in the finished installation.
How much current can the integrated TJA1028 regulator supply?
The integrated regulator in the TJA1028T/5V0/10 can supply up to 70 mA at its 5.0 V output. The NXP TJA1028 datasheet identifies the device as a LIN transceiver with an integrated low-drop voltage regulator. Keep the calculated load, startup demand, and downstream voltage tolerances below that 70 mA limit, and follow the recommended capacitor configuration for stable operation.
Where can I buy TJA1028T/5V0/10 online?
Use the Request a Quote form on this page to request the TJA1028T/5V0/10, including current availability, lead time, and order quantity. The manufacturer offers the device in 5.0 V and 3.3 V regulator variants, so the requested ordering code should include 5V0/10 and any required package or reel suffix. The form allows purchasing teams to confirm the exact suffix before placing an order.
What is the price of TJA1028T/5V0/10?
Current commercial terms for the TJA1028T/5V0/10 should be requested through the Request a Quote form on this page. Pricing depends on order quantity, exact ordering suffix, delivery location, and current component supply. The structured listing supports exact-MPN purchasing, while the quote request provides a direct way to confirm current unit pricing, minimum order quantity, and production lead time.
What is the lead time for TJA1028T/5V0/10?
Request the current lead time through the Request a Quote form on this page. Lead time can vary with the exact package or reel suffix, order volume, and production availability. The NXP TJA1028 is offered in multiple 5.0 V ordering variants, so confirm that the quoted configuration corresponds to TJA1028T/5V0/10 rather than a 3.3 V regulator or different shipping option.
Is TJA1028T/5V0/10 in stock?
Current stock status for TJA1028T/5V0/10 should be confirmed with the Request a Quote form on this page. The form accepts the required quantity and exact suffix so purchasing can obtain a current availability response without confusing this 5.0 V device with the TJA1028T/3V3/10 variant. Production lead time and any manufacturer packaging constraints are also reviewed during the quotation process.
What can replace the TJA1028T/5V0/10?
The closest direct replacements are NXP family members that retain the SOIC-8 footprint and 5.0 V regulator function. TJA1028DT and TJA1028T/5V0/20 are the most direct alternatives, while TJA1027T/5V0/10 provides a related integrated-regulator LIN solution. According to NXP documentation, TJA1028DT and TJA1028T/5V0/20 are functionally identical, but ordering, qualification, and temperature details should be checked before substitution.
Is TJA1028DT the same as TJA1028T/5V0/10?
TJA1028DT is functionally similar to the TJA1028T/5V0/10 because NXP describes both as using the same device documentation, but their ordering codes can represent different construction or customer-facing configurations. Both provide the integrated-regulator LIN transceiver function in an 8-pin format. Before replacing a production device, verify the exact temperature grade, package dimensions, pin definitions, qualification status, and ordering suffix.
What is the best NXP equivalent for TJA1028T/5V0/10?
TJA1028DT is the strongest directly identified NXP equivalent for the TJA1028T/5V0/10 because NXP describes it as functionally identical and associated with the same datasheet. TJA1028T/5V0/20 is another 5.0 V family alternative, while TJA1027T/5V0/10 is a related option with a different internal implementation. Confirm the precise ordering requirements before treating any candidate as a production drop-in replacement.
When should I choose TJA1028T/5V0/10 over TJA1027T/5V0/10?
Choose the TJA1028T/5V0/10 when a new design requires the TJA1028 family's stated LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 positioning and strong electrostatic protection. TJA1027T/5V0/10 may suit designs whose qualification and electrical requirements are already established around that family member. Both integrate a 5.0 V regulator, but their internal implementations and ordering requirements should be reviewed before selection.
Is TJA1028T/5V0/10 suitable for an automotive LIN node?
The TJA1028T/5V0/10 is suitable for LIN nodes requiring 5.0 V regulated local power and compatibility with LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 for 12 V systems. According to the NXP datasheet, its strong electrostatic protection supports robust designs. Confirm the exact temperature grade, automotive qualification status, EMC requirements, and production variant before releasing the design for vehicle use.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা TJA1028T/5V0/10 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose TJA1028T/5V0/10 for a new 8-pin LIN node that needs a half-duplex 10 kbit/s bus interface and a local 5.0 V rail rated to 70 mA. Its stated support for LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 makes it particularly relevant to compact 12 V automotive network nodes. TJA1028DT is the closest directly identified NXP alternative when its ordering and construction requirements fit the design, while TJA1028T/5V0/20 provides another 5 V family configuration. Consider TJA1027T/5V0/10 when its implementation meets the qualification and electrical requirements. Do not select a 3.3 V variant for a circuit that specifically requires a 5.0 V rail. In every case, verify the exact suffix, temperature range, automotive qualification, pinout, and regulator load before release.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য TJA1028DT TJA1028T/5V0/20 TJA1027T/5V0/10
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package SOIC-8 SOIC-8 SOIC-8 SOIC-8
Product Function LIN transceiver with integrated voltage regulator LIN transceiver with integrated voltage regulator LIN transceiver with integrated voltage regulator LIN transceiver with integrated voltage regulator
Nominal Regulator Output 5.0 V 5.0 V 5.0 V 5.0 V
Bus Interface Half-duplex LINbus Half-duplex LINbus Half-duplex LINbus Half-duplex LINbus
Integrated Regulator Yes, low-dropout voltage regulator Yes Yes Yes

মূল পার্থক্যসমূহ

  • Combines LIN physical-layer interface and local 5 V regulator (বনামA discrete LIN transceiver and separate regulator implementation)
  • Direct NXP family replacement path (বনামTJA1028DT)
  • Specified 5 V regulation simplifies local node design (বনামTJA1028T/3V3/10)
  • Automotive-oriented LIN compliance positioning (বনামTJA1027T/5V0/10)

ডিজাইন নোট

Place the TJA1028 close to the LIN connector and route LIN as a controlled-impedance trace with a continuous return path. Keep the TXD and RXD traces away from the LIN connection and switching-node circuitry to reduce common-mode coupling. Connect the required bus termination in the manner shown by the manufacturer application circuit, and avoid long copper stubs between the transceiver, connector, and termination point.

The integrated regulator is specified for output currents up to 70 mA. Include startup current, local logic demand, and peripheral load when calculating the worst-case demand; do not treat the 5.0 V output as a general-purpose supply. Use the manufacturer-recommended input and output capacitors, maintain the required minimum capacitance and ESR characteristics, and verify the regulator's operating region across the complete VSUP range.

Provide a low-impedance ground connection for the transceiver and regulator return current. Place the regulator input capacitor close to VSUP and the output capacitor close to VCC and ground, following the datasheet layout guidance. Keep sensitive RXD routing away from LIN and inductive loads. Correct grounding and capacitor placement are especially important when the module combines the LIN interface with switching actuators or rapidly changing loads.

Do not confuse the 5V0 configuration with the 3.3 V TJA1028 variant, and verify the complete ordering suffix when making a replacement. Likewise, confirm that the board footprint matches SOIC-8 rather than a leaded or alternative package. Before substituting TJA1028DT, TJA1028T/5V0/20, or TJA1027T/5V0/10, compare temperature range, automotive qualification, pin definitions, and regulator electrical limits.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The manufacturer identifies LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 (12 V) compliance. Environmental and automotive qualification declarations for the exact ordering suffix require confirmation from NXP.

ডেটা যাচাই করা হয়েছে: 2026-11-18 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

tja1028t datasheet TJA1028T/5V0/10 datasheet TJA1028T/5V0/10 pinout TJA1028T/5V0/10 application circuit TJA1028T/5V0/10 equivalent TJA1028T/5V0/10 replacement TJA1028T/5V0/10 cross reference NXP TJA1028T/5V0/10 TJA1028T/5V0/10 vs TJA1028DT TJA1028T/5V0/10 SOIC-8 footprint TJA1028T/5V0/10 price TJA1028T/5V0/10 stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

NXP Semiconductors TJA1028T/5V0/10 TJA1028DT TJA1028T/5V0/20 TJA1027T/5V0/10 LIN transceiver Local Interconnect Network LINbus interface IC wired network interface automotive communication integrated voltage regulator low-dropout regulator LIN 2.0 LIN 2.1 SAE J2602 ISO 17987-4:2016 SOIC-8 surface-mount package half-duplex communication 10 kbit/s data rate 5.0 V regulator output 70 mA output current electrostatic protection
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন