NXP Semiconductors

TJA1040T/VM - 1Mbit CAN Transceiver | NXP | Automotive

MPN: TJA1040T/VM ✗ জীবনকালের সমাপ্তি
5 V Vdss 8-SO package, 8 leads Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

TJA1040T/VM সারাংশ

The NXP TJA1040T/VM is a high-speed CAN physical-layer transceiver rated for data rates up to 1 Mbaud, operating from a 5 V supply, and packaged in an 8-pin SO small-outline package. It provides the differential transmitter and receiver interface between a CAN protocol controller and the physical CAN bus, making it suitable for passenger-car and other high-speed Controller Area Network systems.

A CAN transceiver is an interface IC within the broader hierarchy of CAN interface devices, bus transceivers, wired-network interfaces, and semiconductors. It translates logic-level TXD and RXD signals into the differential CANH and CANL bus conductors and converts received bus differential voltage back into a logic-compatible RXD signal. This physical-layer function separates CAN protocol processing in a controller from the electrical drive, receive, and bus-failure behavior implemented by the transceiver.

The TJA1040 supports high-speed CAN operation up to 1 Mbaud, making it appropriate for engine, chassis, body, and other automotive networks operating within that bandwidth. Its 5 V supply arrangement matches conventional automotive CAN interface environments. The device also provides power-down and standby operating states, allowing a system to reduce activity when communication is not required. The listed 8-SO package supports compact surface-mount PCB layouts.

The transceiver architecture combines a differential CAN output stage with a differential input receiver. TXD is the controller-facing transmit input, while RXD is the controller-facing receive output. CANH and CANL provide the physical connection to the bus, VCC supplies the transceiver, VIO supports the interface voltage domain, and EN provides operating-state control. These functions allow a CAN controller to communicate through a multi-conductor differential bus while keeping protocol handling separate from bus signaling.

Typical applications include passenger-car CAN networks, automotive body and chassis control modules, powertrain control equipment, industrial CAN equipment operating at compatible bus speeds, and embedded CAN gateways. In each application, the controller generates TXD and receives RXD, while the TJA1040 handles the physical bus interface. Board design must preserve the transceiver's supply, reference-ground, input, and bus-connection requirements to maintain signal integrity.

When laying out the PCB, place the transceiver and its local decoupling capacitor close to the associated CAN controller, keep CANH and CANL routing compact and symmetrical, and provide the bus termination and common-mode network required by the selected CAN topology. Differential routing reduces sensitivity to external noise, while correct termination prevents excessive reflections from degrading communication at the maximum supported data rate.

This product page combines the NXP device description with package, interface, application, comparison, and layout guidance. It also distinguishes verified source facts from engineering choices that depend on bus topology, termination strategy, controller supply voltage, and EMC validation.

এর জন্য ড্রপ-ইন বিকল্প TJA1040T/VM — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible TJA1040T/VM (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Product Type, Standby Control.

NXP Semiconductors
Package: 8-pin SO (SOIC-8), surface mount
Product Type: High-speed CAN transceiver with standby mode
Standby Control: Dedicated standby (STB) pin
NXP Semiconductors
Package: 8-pin SOIC
Product Type: High-speed CAN transceiver
Standby Control: STB input

TJA1040T/CM,118

✅ ড্রপ-ইন
📦 SOIC-8
Retains the 1 Mbaud CAN transceiver class in the same 8-SO footprint; ordering suffix and associated variant characteristics differ.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TJA1042T/3,1

✅ ড্রপ-ইন
📦 SOIC-8
Matches the 8-SO CAN-transceiver footprint; bus-fault, standby, and implementation-specific electrical behavior differ from the 1 Mbaud TJA1040.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TJA1044T

✅ ড্রপ-ইন
NXP Semiconductors
📦 SOIC-8
High-speed CAN transceiver with standby mode · CAN (Controller Area Network), 2-wire differential bus · 1 Mbit/s · Mantis high-speed CAN transceiver family · 1/1 transceiver (TXD and RXD), half CANbus

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

SN65HVDA1040A

✅ ড্রপ-ইন
📦 SOIC-8
Identified as a direct TJA1040 replacement candidate with the same 8-pin class and high-speed CAN role; manufacturer-specific electrical behavior differs.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TJA1040T/VM বিশেষণ

Product Type CAN physical-layer transceiver
Maximum CAN Data Rate 1 Mbaud
সাপ্লাই ভোল্টেজ 5 V
Transceiver Configuration Half CANbus transceiver
Transmit Capability Differential
Receive Capability Differential
Operating Modes Power-down and standby
প্যাকেজ 8-SO package, 8 leads
মাউন্টিং টাইপ Surface mount
Primary Application Passenger-car high-speed CAN networks
Controller Interface TXD input and RXD output
CAN Bus Interface CANH and CANL differential conductors

TJA1040T/VM পিন কনফিগারেশন

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
পিন 1 TXD — Transmit data input from the CAN controller
পিন 2 GND — Ground connection
পিন 3 VIO — Input and output logic voltage reference
পিন 4 EN — Enable input for operating-state control
পিন 5 CANL — CAN low bus output and input
পিন 6 CANH — CAN high bus output and input
পিন 7 VCC — Transceiver supply connection
পিন 8 RXD — Receive data output to the CAN controller

সাধারণ ব্যবহার

TJA1040T/VM এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Passenger-Car CAN Networks, Automotive Body-Control Modules, Chassis and Powertrain Control, Industrial CAN Control Equipment, Embedded CAN Gateways, CAN Test and Measurement.

🚗

Passenger-Car CAN Networks

The TJA1040T/VM fits a passenger-car CAN network because the NXP TJA1040 family is intended for high-speed CAN communication up to 1 Mbaud. The transceiver sits between the CAN controller and CANH/CANL, while TXD and RXD connect directly to the controller's digital interface. In a body, chassis, or powertrain module, this separation keeps protocol processing outside the physical driver. The 8-SO package also supports compact surface-mount layouts. Existing automotive programs should retain the exact component qualification, EMC validation, and bus-network configuration rather than changing devices solely for availability.

🚗

Automotive Body-Control Modules

A body-control module can use the TJA1040T/VM as the physical interface to a 1 Mbaud CAN network carrying door, lighting, climate, or centralized body-control traffic. TXD accepts the controller's transmit command, while RXD presents the received bus state to the controller. CANH and CANL connect to the harness through the board's bus interface and protection network. The 5 V supply arrangement fits conventional controller environments, but production deployment still requires confirmation of the exact operating-temperature grade, automotive qualification, ESD strategy, and electromagnetic-immunity performance for the vehicle program.

🏭

Chassis and Powertrain Control

The TJA1040T/VM can provide the CAN physical layer for chassis or powertrain-control electronics that exchange high-speed messages with other vehicle nodes. At the supported bus rate of up to 1 Mbaud, the differential CANH/CANL interface helps carry logic signals reliably across a multi-node harness while the controller manages message scheduling and diagnostics. The circuit must be designed around the exact bus topology, including termination, common-mode components, protection, and grounding. Validate transient immunity, radiated emissions, and fault behavior in the final ECU because those system-level outcomes depend on the surrounding harness and board implementation.

🏭

Industrial CAN Control Equipment

The TJA1040T/VM can serve in industrial CAN control equipment that uses a 1 Mbaud-compatible bus for machine control, diagnostics, or distributed I/O. The transceiver provides the differential physical layer between a CAN controller and a long printed-circuit-board or cable network, while the 8-SO package keeps the interface compact. Because industrial systems may use different wiring lengths, isolation arrangements, and fault requirements, verify the common-mode range, termination, isolation strategy, and surge exposure against the manufacturer limits. The CAN protocol and bus topology should remain compatible with the device's stated 1 Mbaud capability.

🖥️

Embedded CAN Gateways

An embedded gateway can use the TJA1040T/VM as the physical-layer endpoint between a host processor or microcontroller and a CAN field bus. The controller's TXD signal drives the differential bus, and the transceiver's RXD signal reports received activity to the host. This arrangement is useful when the host does not integrate a CAN physical layer and requires a discrete 8-SO transceiver. Design the PCB with a short return path, local supply bypassing, defined bus termination, and protection appropriate to the external wiring. Confirm the controller's I/O voltage against VIO and retest timing at the maximum intended bus load.

🔧

CAN Test and Measurement

The TJA1040T/VM can form the bus-side interface of a CAN test fixture, protocol analyzer, or diagnostic interface operating at a compatible rate up to 1 Mbaud. TXD allows the tester to generate bus traffic, while RXD allows a controller to observe received frames. The differential CANH/CANL arrangement provides a standard physical layer for connecting the fixture to a vehicle or industrial CAN network. For bench equipment, include switchable termination, protected bus connectors, and a controlled ground strategy. Verify recessive and dominant voltage levels with the production load because the logic thresholds and bus-driver implementation determine measurement margins.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

TJA1040T/CM,118 Same-family 8-SO CAN transceiver alternative ব্যবহৃত হয়: Passenger-Car CAN Networks, Automotive Body-Control Modules, Industrial CAN Control Equipment, CAN Test and Measurement TJA1057GTK/3Z NXP Semiconductors ব্যবহৃত হয়: Passenger-Car CAN Networks TJA1044T NXP Semiconductors ব্যবহৃত হয়: Automotive Body-Control Modules, Industrial CAN Control Equipment, CAN Test and Measurement TJA1042T/3,1 8-SO high-speed CAN transceiver redesign option ব্যবহৃত হয়: Chassis and Powertrain Control, Embedded CAN Gateways SN65HVDA1040A Cross-manufacturer direct-replacement candidate ব্যবহৃত হয়: Chassis and Powertrain Control, Embedded CAN Gateways
What is the maximum CAN data rate supported by TJA1040T/VM?
The NXP TJA1040T/VM supports CAN communication at up to 1 Mbaud. According to the NXP TJA1040 manufacturer product page, the device is primarily intended for high-speed applications in passenger cars, making it suitable for automotive CAN networks operating at or below that specified rate. The 1 Mbaud figure is the maximum bus data rate, not the CAN controller's protocol-processing throughput.
What type of device is the TJA1040T/VM?
The TJA1040T/VM is a single-channel high-speed CAN transceiver with differential transmit and receive capability. The NXP TJA1040 manufacturer datasheet identifies it as the interface between a CAN protocol controller and the physical bus. It is packaged in an 8-SO surface-mount package and operates from a 5 V supply, with separate TXD, RXD, CANH, CANL, supply, ground, and control-related connections.
Where can I download the TJA1040T datasheet PDF?
The official TJA1040 datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/TJA1040.pdf. The document contains the device description, pin configuration, electrical characteristics, application information, and recommended bus interface details for the TJA1040 family. Use the NXP document rather than third-party copies when validating limits, timing, and application circuits for the TJA1040T/VM.
Where can I find the TJA1040T pinout?
The TJA1040T pinout is shown in the NXP TJA1040 manufacturer datasheet and in the 8-SO package drawing. The TJA1040T/VM uses eight leads: TXD, GND, VIO, EN, CANL, CANH, VCC, and RXD. Assign PCB tracks from the pin-description table in the datasheet and use the manufacturer package outline to maintain correct lead orientation and exposed-pad requirements where applicable.
What is the TJA1040T/VM supply voltage?
The TJA1040T/VM operates from a 5 V supply. The Mouser product listing identifies the NXP device as a 5 V CAN interface IC supporting rates up to 1 Mbaud. The TXD and RXD logic levels are associated with the transceiver's VIO domain, so confirm that the VIO voltage in the manufacturer datasheet matches the connected CAN controller before using the device in a new design.
How does the TJA1040T/VM connect to a CAN controller?
Connect the CAN controller's transmit signal to TXD and its receive signal to RXD. The TJA1040T/VM converts the TXD logic state into differential CANH and CANL bus activity and converts received differential bus voltage into RXD. The NXP TJA1040 manufacturer datasheet describes this division between protocol control and physical-layer signaling, allowing the controller and transceiver to operate as separate functional blocks on the same PCB.
Where can I buy TJA1040T/VM and what is the current lead time?
Use the Request a Quote form on this page to ask for TJA1040T/VM availability, current lead time, and an order quotation. The manufacturer is NXP Semiconductors, and the device is an 8-lead CAN transceiver for operation up to 1 Mbaud. Because this part is identified as obsolete, confirm lifecycle status and whether an authentic, traceable original or an approved NXP successor is required before placing production demand.
Is TJA1040T/VM in stock?
Stock status for TJA1040T/VM should be confirmed through the Request a Quote form on this page. Public distributor listings identify the part as an NXP 8-SO CAN transceiver, but a listing page alone does not establish guaranteed inventory, traceability, or an allocation for a production order. Ask for the current on-hand quantity, lead time, condition, and lot traceability when requesting the quotation.
What is the price of TJA1040T/VM?
Request the current TJA1040T/VM quotation through the Request a Quote form on this page. Because the device is identified as obsolete, the quotation should confirm authentic source, packaging condition, traceability, and lead time as well as the unit price. No fixed commercial price is stated in customer-facing guidance because availability and sourcing conditions can change for legacy components.
TJA1040T/VM vs TJA1040T/CM,118 - which one is the drop-in choice?
The TJA1040T/CM,118 is the closest same-manufacturer alternative identified for a drop-in consideration because it retains the 1 Mbaud CAN transceiver function in the 8-SO format. The primary difference is the orderable suffix and associated device variant rather than a change in CAN speed. Confirm pin names, VIO behavior, electrical limits, and qualification against the NXP datasheets before substituting either packaged ordering code.
What is the difference between TJA1040T/VM and TJA1042T/3,1?
Both devices occupy the 8-SO high-speed CAN transceiver format, but their implementation-specific electrical characteristics and control-pin behavior can differ. The TJA1040T/VM is rated for 1 Mbaud, while detailed TJA1042T/3,1 limits were not established by the cited comparison material. Treat the TJA1042T/3/1 as a conditional drop-in candidate and verify CANH, CANL, EN, VIO, standby, fault-protection, and timing requirements against both manufacturer datasheets.
When should I choose TJA1040T/VM instead of TJA1042T/3,1?
Choose the TJA1040T/VM when an existing design specifically requires the legacy TJA1040 1 Mbaud behavior, established board qualification, and an 8-SO footprint already validated with this device. Consider the TJA1042T/3,1 only after checking its pin behavior, bus protection, standby characteristics, and electrical limits against the original design. For a new high-speed design, newer transceivers may offer broader operating options, but they are not automatically drop-in replacements.
Is TJA1040T/VM suitable for automotive CAN networks?
The TJA1040T/VM is suitable for high-speed passenger-car CAN networks at rates up to 1 Mbaud when the system meets the device's electrical and qualification requirements. The NXP manufacturer page explicitly describes passenger cars as a primary application. For a new automotive production design, confirm the exact ordering variant, AEC-Q100 status, temperature range, EMC behavior, and current NXP lifecycle roadmap before releasing the design.
What can replace TJA1040T/VM?
The TJA1040T/CM,118 is the leading same-manufacturer replacement candidate identified for an 8-SO, 1 Mbaud-class CAN transceiver, while TJA1042T/3/1 and TJA1044T are conditional functional alternatives. The SN65HVDA1040A is identified as a direct replacement candidate in a TI engineering discussion. No substitute should be approved without checking pin functions, VIO voltage, standby logic, bus fault behavior, loopback support, and qualification.
Is the SN65HVDA1040A the same as TJA1040T/VM?
The SN65HVDA1040A is identified as a direct replacement candidate for the TJA1040 family, but it is a different manufacturer's implementation and should not be treated as electrically identical without review. Both devices use an 8-pin CAN-transceiver arrangement, while implementation-specific differences can affect pin usage, bus behavior, and protection. Compare the complete NXP and Texas Instruments datasheets and repeat EMC and system-level CAN testing after substitution.
What are the key specifications of TJA1040T/VM that engineers should know?
The key TJA1040T/VM specifications are a 1 Mbaud maximum CAN rate, 5 V supply operation, differential transmit and receive capability, power-down and standby modes, and an 8-SO surface-mount package. The NXP TJA1040 manufacturer datasheet and product page establish the core interface and speed specifications. VIO range, supply current, bus thresholds, common-mode limits, temperature limits, and qualification details must be taken from the exact datasheet revision for the production ordering code.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা TJA1040T/VM — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the TJA1040T/VM when maintaining an existing 1 Mbaud CAN design whose PCB uses the 8-SO footprint and whose qualification, timing, and EMC behavior are already established. TJA1040T/CM,118 is the closest same-manufacturer candidate for an 8-SO drop-in review, but confirm the exact ordering variant and electrical limits. Consider TJA1042T/3,1 or TJA1044T only after comparing EN behavior, standby operation, bus-fault response, VIO range, and protection with the original device. SN65HVDA1040A is a cross-manufacturer candidate identified as a direct replacement, yet its implementation-specific electrical characteristics still require full datasheet and system validation. For a completely new design, evaluate current lifecycle alternatives rather than starting with an obsolete transceiver.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য TJA1040T/CM,118 TJA1042T/3,1 TJA1044T SN65HVDA1040A
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors Texas Instruments
Package SOIC-8 SOIC-8 - same package SOIC-8 - same package SOIC-8 - same package SOIC-8 - same package
Product Type CAN physical-layer transceiver CAN physical-layer transceiver CAN physical-layer transceiver CAN physical-layer transceiver CAN physical-layer transceiver
Maximum Data Rate 1 Mbaud 1 Mbaud Not stated in cited comparison material Not stated in cited comparison material High-speed CAN class
Transmit Interface Differential CANH/CANL Differential CANH/CANL Differential CANH/CANL Differential CANH/CANL Differential CANH/CANL
Receive Interface Differential RXD output Differential RXD output Differential RXD output Differential RXD output Differential RXD output
Power-Down and Standby Supported Supported Not stated in cited comparison material Not stated in cited comparison material Not stated in cited comparison material
Supply Voltage 5 V Not stated in cited comparison material Not stated in cited comparison material Not stated in cited comparison material Not stated in cited comparison material
Controller Interface TXD and RXD TXD and RXD TXD and RXD TXD and RXD TXD and RXD
Lifecycle Status Obsolete Not stated in cited comparison material Not stated in cited comparison material Not stated in cited comparison material Not stated in cited comparison material

মূল পার্থক্যসমূহ

  • Established 1 Mbaud TJA1040 interface (বনামTJA1042T/3,1)
  • Same-manufacturer 8-SO alternative with 1 Mbaud class (বনামTJA1040T/CM,118)
  • Documented power-down and standby operation (বনামSN65HVDA1040A)

ডিজাইন নোট

Place the TJA1040T/VM close to the CAN controller and place its local supply-decoupling capacitor at the VCC and ground pins. Keep CANH and CANL as a compact, closely coupled differential pair, with a continuous ground reference beneath the pair where the board stackup permits. Route the pair away from switching nodes, high-current edges, and unrelated clocks. Correct differential geometry reduces radiated emissions and improves immunity to external bus noise.

Do not assume that every 8-SO CAN transceiver is automatically interchangeable. Before substituting an alternative, compare TXD and RXD thresholds against the controller voltage, VIO behavior, EN polarity, standby or sleep timing, CANH/CANL output levels, common-mode range, bus-fault protection, and loopback implementation. A package match alone does not guarantee timing or electrical compatibility. Record the exact datasheet revision and validate the candidate in the complete CAN network.

Apply the termination network specified for the complete CAN topology rather than adding termination blindly at every node. Keep the termination components close to the transceiver or bus connector, and keep the CANH-to-CANL loop area small. Provide the required common-mode network near the bus interface and use a ground strategy that minimizes common-mode conversion. Confirm that chassis, shield, and signal-ground connections follow the vehicle or industrial network architecture.

The listed operating supply is 5 V, while VIO establishes the logic domain used by TXD and RXD. Verify the exact VIO range from the manufacturer datasheet and ensure it matches the CAN controller's I/O voltage. Provide local high-frequency bypassing at VCC and a clean ground return. Confirm startup, standby, and power-down sequencing so the controller does not interpret an uncontrolled bus or pin state as valid traffic during reset.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The cited manufacturer and distributor snippets do not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for the exact TJA1040T/VM ordering code. Consult the current NXP product page and the applicable NXP material declaration before production release.

ডেটা যাচাই করা হয়েছে: 2026-11-14 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

tja1040t datasheet tja1040t pdf datasheet tja1040t pdf tja1040t cm 118 datasheet nxp tja1040t TJA1040T/VM datasheet TJA1040T/VM pinout TJA1040T/VM equivalent TJA1040T/VM replacement TJA1040T/VM price TJA1040T/VM stock TJA1040T vs TJA1042T/3,1

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

NXP Semiconductors TJA1040T/VM TJA1040T/CM,118 TJA1042T/3,1 TJA1044T SN65HVDA1040A CAN transceiver Controller Area Network CAN physical layer CAN interface IC bus transceiver wired-network interface semiconductor differential CANH/CANL TXD RXD 1 Mbaud 5 V supply power-down mode standby mode 8-SO package SOIC-8 surface-mount package passenger-car CAN network automotive CAN
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন