শেষবার কেনার নোটিশ: TJA1041AT/N এন্ড-অফ-লাইফের কাছাকাছি। শেষ অর্ডারের তারিখ: আমাদের সাথে যোগাযোগ করুন. উপলব্ধ বিকল্প পার্ট দেখুন →
NXP Semiconductors

TJA1041AT/N - 1 Mbit/s High-Speed CAN Transceiver | NXP

MPN: TJA1041AT/N ✗ জীবনকালের সমাপ্তি
5 V Vdss 14-pin SO package Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

TJA1041AT/N সারাংশ

The NXP Semiconductors TJA1041AT/N is a high-speed CAN bus transceiver for automotive applications operating at data rates up to 1 Mbit/s. It provides a physical-layer interface between a CAN protocol controller and the differential CAN bus, offering differential transmit and receive functions in a 14-pin SO package. Its nominal 5 V supply range is 4.75 V to 5.25 V.

A CAN transceiver, also called a CAN physical-layer interface, converts logic-level signals from a CAN controller into differential bus signals and converts the received bus state back into a logic signal. Within the automotive electronics hierarchy, the TJA1041AT/N belongs to the CAN interface IC class, connecting the protocol-control layer to the physical communication bus.

The principal feature of the TJA1041AT/N is its support for high-speed CAN communication up to 1 Mbit/s. Differential CAN signaling improves immunity to electromagnetic noise, while the transceiver's transmit and receive paths integrate the controller and bus into one physical-layer solution. The device is specifically intended for automotive high-speed CAN nodes, where robust differential signaling, compact packaging, and predictable interoperability are important.

The TJA1041A family uses a nominal 5 V operating environment, with the documented supply range of 4.75 V to 5.25 V. The 14-pin SO package supports surface-mount PCB assembly and provides the CANH and CANL bus connections together with controller-facing TXD, RXD, and error-status signaling. Exact pin functions, absolute maximum ratings, loop-delay limits, and output-stage characteristics should be taken from the manufacturer datasheet.

Typical deployments include automotive body and comfort modules, powertrain controllers, gateway units, cluster electronics, infotainment systems, and industrial CAN equipment that implements a compatible high-speed CAN physical layer. In these systems, the transceiver replaces discrete driver and receiver circuitry around the CAN controller while keeping the PCB layout compact.

When laying out the circuit, place the transceiver close to the bus connector and route CANH and CANL as a matched differential pair. Keep the connection from CANH and CANL through the connector as short as practical, follow the datasheet recommendations for termination, and use the pin-description table in the manufacturer datasheet when assigning PCB tracks. The NXP product page identifies TJA1041AT as end of life, so new designs should confirm the recommended successor before committing the footprint.

This page combines the manufacturer's product information, datasheet links, distributor records, lifecycle information, and packaging details with practical application guidance, comparison parameters, and board-level design notes. It is intended to accelerate component selection and design-in work while keeping the final engineering decisions anchored to the official NXP documentation.

এর জন্য ড্রপ-ইন বিকল্প TJA1041AT/N — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

TJA1041AT/CM,118

✅ ড্রপ-ইন
📦 SOIC-14
Adds documented standby and sleep-mode options; data rate remains up to 1 Mbit/s and supply remains 4.75 V to 5.25 V

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TJA1041AT/N,112

✅ ড্রপ-ইন
📦 SOIC-14
Same TJA1041AT family and 1 Mbit/s CAN performance; ordering suffix differs, so confirm packing configuration

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TJA1041AT/N,118

✅ ড্রপ-ইন
📦 SOIC-14
Same TJA1041AT family and 14-pin footprint; ordering suffix differs in packing or delivery configuration

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TJA1041AT/V,518

✅ ড্রপ-ইন
📦 SOIC-14
Same 14-pin TJA1041AT physical-layer family; ordering code and delivery configuration require verification

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TJA1041AT/H/V,518

✅ ড্রপ-ইন
📦 SOIC-14
Same TJA1041AT family footprint with an additional ordering suffix; verify lead-free, delivery, and environmental options

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TJA1041T/C

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 SOIC-14
Same high-speed CAN transceiver family and footprint, with different low-power or ordering options and potentially 70% parameter proximity

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TJA1041AT/N বিশেষণ

Product Type High-speed CAN transceiver
Maximum CAN Data Rate 1 Mbit/s
Nominal Supply Voltage 5 V
Supply Voltage Range 4.75 V to 5.25 V
Bus Interface Differential CANH and CANL
Controller Interface Differential transmit and receive capability
প্যাকেজ 14-pin SO package
Package Type SOIC-14
মাউন্টিং টাইপ Surface mount
পিনের সংখ্যা 14 pins
Primary Application Automotive high-speed CAN nodes
Transmit Output Type Differential
Receive Output Type Differential receive
Protocol Compatibility Controller Area Network (CAN)
লাইফসাইকেল স্ট্যাটাস End of Life
Manufacturer NXP Semiconductors

TJA1041AT/N soic-14 পিন কনফিগারেশন গাইড

TJA1041AT/N (soic-14 প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

TJA1041AT/N-এর জন্য soic-14 প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি TJA1041AT/N.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

TJA1041AT/N এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Automotive Body Control Module, Powertrain CAN Gateway, Vehicle Infotainment CAN Interface, Industrial CAN Control Equipment, Diagnostic and Service Gateway, CAN-Based Sensor Network.

🚗

Automotive Body Control Module

The TJA1041AT/N fits an automotive body controller that exchanges switch, lighting, and door-state data over a high-speed CAN bus. Its 1 Mbit/s capability matches the TJA1041A family's documented automotive focus, while the 4.75 V to 5.25 V supply range supports conventional 5 V CAN nodes. Place it beside the CAN controller, connect CANH and CANL to the routed bus pair, and verify that the selected ordering code satisfies the vehicle program's qualification requirements.

⚡

Powertrain CAN Gateway

A gateway between automotive CAN domains can use the TJA1041AT/N as the physical-layer device on a high-speed CAN segment. Its differential transmit and receive functions isolate the controller from the bus and support communication up to 1 Mbit/s. The 14-pin SOIC footprint also permits a conventional surface-mount layout with short bus routes to the connector. Confirm transceiver timing, fault handling, and the end-of-life replacement plan against the system requirements.

📺

Vehicle Infotainment CAN Interface

The TJA1041AT/N can provide the physical bus interface for infotainment head units, instrument clusters, or display controllers that participate in a high-speed CAN network. At up to 1 Mbit/s, the device addresses the classic CAN network used for vehicle status and control information. Its compact 14-pin SOIC package leaves board area for display and processing circuitry, while CANH and CANL should be routed as a controlled differential pair away from switching nodes.

🏭

Industrial CAN Control Equipment

The TJA1041AT/N is also applicable to industrial equipment that uses a 5 V high-speed CAN physical layer, including sensor controllers, machine interfaces, and remote monitoring units. The documented 4.75 V to 5.25 V operating range suits regulated 5 V designs, and the 1 Mbit/s rate covers many controller-area-network applications. Designers should confirm bus topology, termination strategy, fault handling, and qualification expectations before adapting an automotive-origin transceiver to industrial service.

🖥️

Diagnostic and Service Gateway

A diagnostic gateway can use the TJA1041AT/N as the high-speed CAN physical-layer interface when forwarding requests and responses between a service tool, a vehicle network, and other embedded controllers. The differential bus interface supports communication up to 1 Mbit/s, while TXD and RXD connect directly to the CAN controller functions. Route the bus pair toward the diagnostic connector with minimal stubs, and validate the complete termination network under worst-case bus faults.

🧩

CAN-Based Sensor Network

Distributed sensors, actuators, and acquisition nodes can use the TJA1041AT/N where a wired CAN bus is preferred for noise-tolerant, multi-node communication. The device's differential signaling and 1 Mbit/s data-rate capability suit moderate-speed control and monitoring networks. Its nominal 5 V supply range allows integration with conventional embedded controllers, but the system designer must provide correct bus termination, common-mode behavior, and grounding consistent with the manufacturer's reference layout.

What is the TJA1041AT/N used for?
The TJA1041AT/N is a high-speed CAN transceiver that connects a CAN protocol controller to a Controller Area Network bus. According to the NXP TJA1041 datasheet, it provides differential transmit capability to the bus and differential receive capability to the controller. The device supports automotive CAN nodes operating at rates up to 1 Mbit/s and uses a 14-pin SOIC package.
What is the maximum data rate of the TJA1041AT/N?
The TJA1041AT/N supports CAN data rates up to 1 Mbit/s. The NXP product page describes the TJA1041A as an interface between the protocol controller and the physical bus in a CAN node, primarily intended for automotive high-speed CAN applications. Its differential transmit and receive paths are designed for that high-speed automotive communication role.
What is the supply voltage range of the TJA1041AT/N?
The TJA1041AT/N operates from 4.75 V to 5.25 V, corresponding to a nominal 5 V supply. This operating range appears in the TJA1041A technical information and is suitable for conventional 5 V automotive CAN physical layers. Check the manufacturer's absolute maximum ratings and decoupling requirements before applying the device in a new design.
Where can I download the TJA1041AT datasheet PDF?
The official NXP TJA1041 datasheet is available at https://www.nxp.com/docs/en/data-sheet/TJA1041.pdf. It describes the general characteristics, application interface, electrical specifications, operating information, and pin arrangements for the TJA1041 family. Use the NXP product page for lifecycle notices, successor information, and current purchasing options.
Where can I find the TJA1041AT/N pinout?
The TJA1041AT/N pin assignment is published in the pin-configuration section of the NXP TJA1041 datasheet. The device is supplied in a 14-pin SO package with controller-side, error-status, supply, ground, and differential CAN bus connections. Use that table for PCB track assignment and confirm the ordering-code suffix before treating any mechanical drawing as authoritative.
Is TJA1041AT/N still active?
No. The NXP product page lists TJA1041AT as End of Life. Existing designs can continue using the documented TJA1041A electrical and pin characteristics, but new production designs should consult the NXP shipping-discontinuance and replacement information before investing in layout or production tooling. Lifecycle status can change, so verify the current notice with NXP.
What is the best drop-in replacement for TJA1041AT/N?
The closest same-family choices are the TJA1041T and TJA1041A ordering variants that retain the 14-pin CAN transceiver footprint, but controller sleep, standby, and environmental options must be compared before substitution. The NXP product page provides the shipping-discontinuance and replacement details for TJA1041AT. Confirm pin compatibility, supply range, loop delay, and qualification with the manufacturer before releasing a drop-in design.
Can the TJA1041AT/N replace a TJA1041AT/CM,118?
The TJA1041AT/N and TJA1041AT/CM,118 use the same 14-pin high-speed CAN transceiver family, but their ordering codes can indicate different standby, sleep, or environmental options. The Mouser record describes the CM,118 version as a high-speed CAN transceiver with standby and sleep mode. Compare those functional options and the exact package configuration before treating the substitution as drop-in.
When should I choose TJA1041AT/N instead of a TJA1041T variant?
Choose TJA1041AT/N when an existing qualified automotive design specifically requires the TJA1041A ordering variant and its 5 V, 14-pin physical-layer implementation. Choose a TJA1041T variant when its documented low-power or sleep behavior better matches the target CAN node and it has been qualified for that use. The meaningful distinctions are feature set and qualification, not package size.
Is the TJA1041AT/N suitable for automotive applications?
Yes. The NXP product documentation identifies the TJA1041A as a transceiver primarily intended for automotive high-speed CAN applications up to 1 Mbit/s. It supplies differential bus transmit and receive functions from a 4.75 V to 5.25 V source in a surface-mount 14-pin SO package. Automotive suitability for a specific vehicle program still depends on the exact ordering code and qualification status.
What can replace the TJA1041AT/N?
The TJA1041AT/N can be replaced by a pin-compatible 14-pin TJA1041 family member only after its standby, sleep, qualification, and ordering-code differences are resolved. NXP publishes the approved discontinuation and replacement path on the TJA1041AT product page. Use that manufacturer guidance rather than assuming that every similarly named CAN transceiver has identical electrical behavior.
Is the TJA1041AT/N the same as the TJA1041AT/N,118?
The NXP TJA1041AT/N and TJA1041AT/N,118 belong to the same device family and are shown in distributor records as 14-pin CAN transceivers, but the complete ordering code can identify different packing or delivery details. Use the manufacturer ordering-information table to distinguish the suffixes. For PCB compatibility, the 14-pin pin configuration is the controlling requirement.
What are the key specifications of TJA1041AT/N that engineers should know?
The TJA1041AT/N is a 5 V high-speed CAN transceiver rated for operation from 4.75 V to 5.25 V and data rates up to 1 Mbit/s. It provides differential transmit and receive functions between a CAN controller and the CANH/CANL bus, uses a 14-pin surface-mount SO package, and is identified by NXP as end of life. Additional electrical limits must be taken from the official datasheet.
Where can I buy the TJA1041AT/N online?
Use the Request a Quote form on this page to request the TJA1041AT/N, current availability, lot traceability, and delivery terms. Because NXP lists the TJA1041AT as end of life, a confirmed manufacturer replacement should be considered for new projects. Requesting a quotation on this page also allows the exact suffix and required package configuration to be matched before an order is placed.
What is the lead time for the TJA1041AT/N?
The current lead time for an end-of-life TJA1041AT/N depends on remaining factory inventory, authorized supply, and the requested delivery quantity. Request the current lead time and minimum order quantity through the Request a Quote form on this page. For a new production program, also request NXP's recommended replacement and any last-time-buy information.
What is the price of the TJA1041AT/N?
Use the Request a Quote form on this page for a current quotation covering the exact TJA1041AT/N ordering code and required quantity. Because the device is end of life, availability and volume pricing may vary with remaining stock and lot traceability. The quotation request is the appropriate route for confirming current commercial terms without relying on stale historical pricing.
Does the TJA1041AT/N support CAN FD?
The TJA1041AT/N is documented as a high-speed CAN transceiver for operation up to 1 Mbit/s. CAN FD operation requires both the controller and the physical-layer transceiver to support the higher signaling rates and data-stuffing characteristics, so this classic high-speed CAN transceiver should not be treated as a CAN FD device without explicit manufacturer confirmation.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা TJA1041AT/N — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the TJA1041AT/N for an existing 5 V high-speed CAN design that specifically uses the TJA1041AT ordering variant and retains its qualified footprint. It supports bus rates up to 1 Mbit/s and a 4.75 V to 5.25 V supply range, but NXP identifies TJA1041AT as end of life, so new programs should review the manufacturer's replacement path before committing to production.

Use the TJA1041AT/CM,118 when standby and sleep-mode options are explicitly required and the exact ordering code meets the product specification. The TJA1041AT/N,112, TJA1041AT/N,118, TJA1041AT/V,518, and TJA1041AT/H/V,518 provide same-family ordering choices that preserve the 14-pin footprint, but their suffixes must be checked for packing, delivery, environmental, and power-management distinctions. Consider the TJA1041T/C only after confirming that its low-power behavior and qualification match the target design. For every substitution, verify the pin configuration, supply range, timing limits, bus-fault behavior, and lifecycle status rather than relying on the package name alone.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য TJA1041AT/CM,118 TJA1041AT/N,112 TJA1041AT/N,118 TJA1041AT/V,518 TJA1041AT/H/V,518 TJA1041T/C
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package SOIC-14 SOIC-14 - same SOIC-14 - same SOIC-14 - same SOIC-14 - same SOIC-14 - same SOIC-14 - same
Product Type High-speed CAN transceiver High-speed CAN transceiver High-speed CAN transceiver High-speed CAN transceiver High-speed CAN transceiver High-speed CAN transceiver High-speed CAN transceiver
Maximum Data Rate 1 Mbit/s 1 Mbit/s 1 Mbit/s 1 Mbit/s 1 Mbit/s 1 Mbit/s 1 Mbit/s
Supply Voltage Range 4.75 V to 5.25 V 4.75 V to 5.25 V 4.75 V to 5.25 V 4.75 V to 5.25 V 4.75 V to 5.25 V 4.75 V to 5.25 V 4.75 V to 5.25 V
Bus Interface Differential CANH/CANL Differential CANH/CANL Differential CANH/CANL Differential CANH/CANL Differential CANH/CANL Differential CANH/CANL Differential CANH/CANL
Low-Power Feature TJA1041AT/N ordering options Standby and sleep mode documented Confirm exact ordering suffix Confirm exact ordering suffix Confirm exact ordering suffix Confirm exact ordering suffix TJA1041T family low-power options
Lifecycle Status End of Life Verify current NXP lifecycle status Verify current NXP lifecycle status Verify current NXP lifecycle status Verify current NXP lifecycle status Verify current NXP lifecycle status Verify current NXP lifecycle status

মূল পার্থক্যসমূহ

  • Documented low-power feature set in the ordering variant (বনামTJA1041AT/CM,118)
  • Direct family continuity with the same 14-pin footprint (বনামTJA1041AT/N,118)
  • Established automotive high-speed CAN positioning (বনামTJA1041T/C)

ডিজাইন নোট

Route CANH and CANL as a closely coupled differential pair from the transceiver to the bus connector. Avoid routing the pair over split ground planes or across high-current switching paths. Keep the bus connection short, minimize stubs, and follow the pin-configuration and application-layout guidance in the NXP datasheet. Maintain a continuous return path beneath the pair so differential currents encounter a substantially lower loop area.

Do not assume that ordering codes ending in N, CM, V, H/V, 112, or 118 are electrically identical. Confirm the exact standby, sleep, qualification, lead-free, packing, and delivery options against the NXP ordering table before substitution. A shared 14-pin footprint is necessary for PCB reuse, but low-power behavior and environmental qualification must also match the system requirements.

Provide a clean 4.75 V to 5.25 V supply to the transceiver and place its required bypass capacitors close to the supply pins with short ground returns. Avoid sharing noisy supply paths with actuators or switching regulators. Review the datasheet's supply-current and power-up specifications, then include the device's quiescent and operating current when sizing the regulator and the thermal budget of the module.

Termination placement must follow the physical CAN network topology rather than a fixed rule applied to every node. A 120-ohm termination is normally effective only at the two ends of the bus. Check the bus configuration, node count, cable length, and fault behavior during validation, and use the manufacturer's guidance when measuring recessive and dominant voltage levels.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The NXP product page identifies TJA1041AT as End of Life. No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was present in the referenced listings, so these fields remain unknown.

ডেটা যাচাই করা হয়েছে: 2026-11-14 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

tja1041at datasheet nxp tja1041at TJA1041AT/N datasheet pdf TJA1041AT/N pinout TJA1041AT/N specifications TJA1041AT/N replacement TJA1041AT/N equivalent TJA1041AT/N cross reference TJA1041AT/N SOIC-14 TJA1041AT/N automotive CAN TJA1041AT/N price TJA1041AT/N stock NXP TJA1041AT/N price

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

NXP Semiconductors TJA1041AT/N TJA1041A TJA1041T/C Controller Area Network CAN transceiver high-speed CAN physical-layer interface protocol controller differential signaling CANH CANL 1 Mbit/s 4.75 V to 5.25 V SOIC-14 surface mount automotive electronics bus termination standby mode sleep mode electromagnetic immunity CAN FD end of life RoHS REACH
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন