Texas Instruments

TLV2262IP Dual Rail-to-Rail Low-Power Op Amp | Texas Instruments

MPN: TLV2262IP ✓ সক্রিয়
±4 V to 8 V Vdss 8-pin PDIP (P) Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

TLV2262IP সারাংশ

Texas Instruments TLV2262IP is a dual CMOS operational amplifier designed for low-voltage, low-power signal-conditioning applications. It provides two rail-to-rail output amplifier channels in an 8-pin PDIP package and operates from single or split supplies within the stated ±4 V to 8 V range. The device is intended for portable instrumentation, sensor interfaces, audio signal paths, and other systems requiring low quiescent current and rail-to-rail output swing.

An operational amplifier, commonly called an op amp, is an analog integrated circuit that uses high-gain differential amplification to improve signals applied to its inputs. The TLV2262 belongs to the broader operational-amplifier hierarchy, which sits within analog and mixed-signal integrated circuits. Its rail-to-rail output architecture allows the output voltage to approach the supply rails more closely than a conventional fixed-headroom amplifier, improving usable output range in low-voltage systems.

The TLV2262IP combines low-power operation with rail-to-rail output performance. The manufacturer describes the device as a dual rail-to-rail low-voltage, low-power operational amplifier and identifies it as part of the Advanced LinCMOS rail-to-rail operational-amplifier family. Its dual-channel configuration provides two independent amplifier sections in one package, reducing component count when a board requires matched signal paths or multiple low-power analog channels.

The TLV2262 family is positioned between the micro-power TLV225x devices and the higher-ac-performance TLC227x devices. This positioning makes the TLV2262 useful when low supply current is important but greater bandwidth or dynamic capability is needed than a micropower amplifier provides. The manufacturer's TLV2262 family description specifically identifies the devices as suitable for low-power, battery-powered applications.

Typical uses include portable sensor conditioning, low-voltage audio amplification, instrumentation, industrial measurement interfaces, and embedded analog signal processing. The PDIP package is appropriate for through-hole boards, prototyping systems, and designs that favor easy inspection and hand assembly. Because the device is an analog amplifier, its input offset voltage, input bias current, noise, common-mode behavior, output capability, and stability with the selected feedback network determine the practical application performance.

When designing around the TLV2262IP, verify the exact pin assignment, supply limits, electrical characteristics, and recommended operating conditions in the manufacturer datasheet before assigning PCB connections. Pay particular attention to the choice of input and output biasing, the output-load condition, and the feedback topology. A stable feedback network and adequate decoupling are important when the amplifier drives capacitive loads or operates near a supply rail.

This product page combines the manufacturer’s device description, package and channel information, practical design guidance, sourcing-oriented commercial answers, and a conservative comparison of same-family alternatives. It is intended to help engineers establish whether the TLV2262IP fits a specific low-voltage analog design before moving to detailed datasheet review and PCB implementation.

এর জন্য ড্রপ-ইন বিকল্প TLV2262IP — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

TLV2262IP

✅ ড্রপ-ইন
Texas Instruments
📦 8-pin PDIP (P)
Dual operational amplifier · 2 channels · Advanced LinCMOS CMOS · Rail-to-rail output · ±4 V to 8 V

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

TLV2264IP

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 8-pin PDIP (P)
Provides four amplifier channels instead of two, a 100% increase in channel count; package organization and pin assignments require confirmation before substitution.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TLV2262IP সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type Dual operational amplifier
Number of Channels 2 channels
Technology Advanced LinCMOS CMOS
Output Topology Rail-to-rail output
Supply Voltage Range ±4 V to 8 V
প্যাকেজ 8-pin PDIP (P)
মাউন্টিং টাইপ Through-hole

TLV2262IP 8-pin pdip (p) পিন কনফিগারেশন গাইড

TLV2262IP (8-pin pdip (p) প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

TLV2262IP-এর জন্য 8-pin pdip (p) প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি TLV2262IP.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

TLV2262IP এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Portable Sensor Signal Conditioning, Battery-Powered Instrumentation, Low-Voltage Audio Preamplifier, Industrial Process Measurement, Low-Voltage Data Acquisition, Embedded Analog Control Interface.

🧩

Portable Sensor Signal Conditioning

The TLV2262IP suits portable sensing systems that need two low-voltage analog channels without adding a higher-power dual amplifier. Its dual-channel configuration supports paired conditioning paths such as a sensor signal and its reference, or a measurement input and an instrumentation stage. The manufacturer identifies the TLV2262 family as low-power and suitable for battery-powered equipment, while rail-to-rail output helps use more of the available signal range. Confirm the exact input common-mode range, offset, bias current, and supply current in the datasheet before fixing gain and biasing values.

🔧

Battery-Powered Instrumentation

TLV2262IP can condition low-level signals in handheld or field instrumentation where every milliamp affects operating time. Its two amplifier channels allow a system to handle more than one analog function in a single 8-pin PDIP package. The rail-to-rail output architecture is useful when the required output range is relatively close to the available supply voltage. Design the bias network and feedback resistors around the confirmed input offset, bias current, output swing, and supply-current limits, and include bypass capacitance close to the power pins.

🎧

Low-Voltage Audio Preamplifier

The TLV2262IP is appropriate for small-signal audio preamplification in portable or low-voltage analog equipment where two channels are useful for stereo or balanced signals. Rail-to-rail output can improve the usable swing from a limited supply, while the dual package reduces the number of amplifier components. The device is not presented as a high-performance audio amplifier, so the application should verify output-noise, distortion, slew-rate, and load-current specifications against the signal bandwidth. Feedback-component selection and output isolation from capacitive loads are especially important.

🏭

Industrial Process Measurement

TLV2262IP can support low-voltage process-measurement front ends that require two independent amplifier channels and through-hole assembly. Typical uses include scaling a transducer output and conditioning a temperature or level signal before conversion by an ADC. The low-voltage, low-power positioning supports compact control boards, while the PDIP package simplifies inspection and prototype rework. Confirm the amplifier’s common-mode range against the transducer output, and use its maximum output-current and capacitive-load limits to determine whether an isolation resistor or additional buffering stage is required.

📺

Low-Voltage Data Acquisition

TLV2262IP fits two-channel data-acquisition boards where analog inputs must be scaled into a compact ADC range. One channel can amplify a primary sensor while the second handles a reference, monitor, or auxiliary input. Its rail-to-rail output improves signal utilization on low-amplitude supplies, and the dual architecture reduces board area compared with two separate single amplifiers. Choose resistor values that account for the device’s input-offset and bias-current effects, verify ADC input compatibility, and place local supply bypassing close to the amplifier to preserve measurement stability.

🖥️

Embedded Analog Control Interface

The TLV2262IP can provide the analog interface between low-level control signals and an embedded ADC or comparator in a compact embedded system. Two channels allow simultaneous conditioning of a feedback signal and a command or threshold signal. Its low-voltage operation is appropriate for embedded systems powered from limited rails, while the through-hole PDIP package supports prototype and repair workflows. The design must maintain input signals inside the specified common-mode range and respect the output-voltage and load-current limits, especially when driving an ADC input, relay driver, or long PCB trace.

What is the TLV2262IP?
The TLV2262IP is a Texas Instruments dual rail-to-rail CMOS operational amplifier in an 8-pin PDIP package. According to the manufacturer product page, the TLV2262 is a low-voltage, low-power amplifier with two amplifier channels, and the listed supply range is ±4 V to 8 V. It is suited to low-voltage instrumentation, portable equipment, sensor interfaces, and other analog signal-conditioning systems where low power and useful output swing are priorities.
Where can I download the TLV2262IP datasheet?
The official TLV2262 family datasheet is available from the Texas Instruments product document link at https://www.ti.com/lit/gpn/TLV2262. The manufacturer’s orderable-parts page for TLV2262IP is https://www.ti.com/product/TLV2262/part-details/TLV2262IP. These pages provide the authoritative electrical characteristics, ordering information, pin description, and package details needed for schematic capture and PCB design.
Where can I find the TLV2262IP pinout?
The TLV2262IP pinout should be taken from the pin-description table in the manufacturer datasheet because the 8-pin PDIP package contains two complete dual-amplifier channels plus power connections. The part is identified as an 8-pin PDIP (P) package by Texas Instruments. Assign the eight physical pins only after confirming the exact channel pins, supply pins, and no-connect or offset-trim details in the official TLV2262 documentation.
What are the key specifications of TLV2262IP that engineers should know?
The key confirmed specifications are two amplifier channels, Advanced LinCMOS construction, rail-to-rail output operation, a listed supply range of ±4 V to 8 V, and an 8-pin PDIP package. The manufacturer describes the TLV2262 family as combining a compromise between the TLV225x micro-power devices and the TLC227x devices’ AC performance. Detailed bandwidth, slew rate, offset, noise, and current limits require confirmation from the official datasheet.
Is the TLV2262IP suitable for battery-powered applications?
The TLV2262IP is suitable for battery-powered applications when its confirmed low-power operating characteristics satisfy the system’s load and performance budget. Texas Instruments specifically describes the TLV2262 family as low-power devices intended for battery-powered operation. The exact supply current under each channel’s operating condition should be taken from the manufacturer datasheet, since those values were not stated on the product listing.
Can the TLV2262IP operate from a single supply?
The TLV2262IP can be used in single-supply or split-supply signal-processing designs, provided the selected rails, input common-mode range, output swing, and load meet the device’s detailed electrical limits. The manufacturer identifies the device as low-voltage and rail-to-rail at the output. The official datasheet should be checked for the exact input common-mode range and output behavior across the permitted supply voltage.
What is the difference between rail-to-rail input and rail-to-rail output?
Rail-to-rail output means the amplifier can drive its output closer to the positive and negative supply rails than a conventional amplifier with fixed output headroom. Rail-to-rail input means the input common-mode range extends toward both supply rails, allowing operation over a broader portion of the supply voltage. Texas Instruments explicitly confirms rail-to-rail output for TLV2262, while the input-side range must be checked in the detailed datasheet.
TLV2262IP vs TLV2264IP: which is better for my design?
Choose TLV2262IP when the circuit requires two amplifier channels, while TLV2264IP provides four channels in the family. Their package organization and channel count differ, so TLV2264IP is not automatically a pin-for-pin substitution for TLV2262IP. For a two-channel board, TLV2262IP is the more direct family member; for four-channel signal conditioning, compare the quad device’s package and complete electrical ratings before selecting it.
When should I choose TLV2262IP over another low-power dual op amp?
Choose TLV2262IP when the design needs two low-voltage, low-power amplifier channels with rail-to-rail output and an 8-pin PDIP through-hole package. The device is particularly suitable when supply efficiency and low-voltage operation matter more than the higher AC performance of the TLC227x family. Before final selection, compare input offset, bias current, noise, bandwidth, slew rate, output load capability, and package constraints using the manufacturer’s published limits.
What is the best drop-in replacement for TLV2262IP?
The TLV2262IP has a specific 8-pin PDIP pin arrangement, so a genuine drop-in replacement must match that package and pinout while also meeting the relevant voltage, current, offset, bandwidth, and output specifications. The available cross-reference search did not identify a candidate that could be confirmed as both pin-compatible and parametrically equivalent. Do not substitute solely by amplifier type or channel count; verify the exact pinout and electrical characteristics first.
What can replace TLV2262IP?
A possible replacement must be a dual amplifier in an 8-pin PDIP with the same pin assignments and acceptable electrical performance. Same-family parts such as the TLV2264IP have a different channel count and therefore are not direct replacements. The manufacturer’s cross-reference search and official part documentation are the appropriate starting points, followed by a full comparison of supply range, input range, offset, bias current, bandwidth, slew rate, and output drive.
Is TLV2262IP the same as TLV2262IP?
The TLV2262IP is the exact orderable 8-pin PDIP configuration of the Texas Instruments TLV2262 dual rail-to-rail operational amplifier. Other suffixes or package options in the TLV2262 family may differ in packaging, temperature grade, or qualification, so they should not be treated as identical without checking the orderable-device table. Use the complete manufacturer part number when requesting a quotation or preparing a component BOM.
Where can I buy TLV2262IP online?
Use the Request a Quote form on this page to request current TLV2262IP supply, minimum order quantity, lead time, and commercial terms. The device is listed as an 8-pin PDIP dual rail-to-rail operational amplifier by Texas Instruments. A current distributor listing can confirm market availability, but the Request a Quote form provides the direct purchasing path for your required quantity and target date.
What is the price of TLV2262IP?
Current commercial pricing for the TLV2262IP should be requested through the Request a Quote form on this page. The structured offer is regenerated from current sourcing data rather than embedded in the technical copy, so its price reflects the requested quantity, package configuration, availability, and currency. For technical evaluation, use the official Texas Instruments datasheet and product page before requesting a production quotation.
What is the lead time for TLV2262IP?
Current lead time for TLV2262IP depends on factory inventory, production scheduling, order quantity, and the requested delivery date. Submit the required quantity and target schedule through the Request a Quote form on this page. Because the product is offered in an 8-pin PDIP configuration, include the complete part number and any required assembly, inspection, or traceability requirements in the request.
Is TLV2262IP in stock?
Current TLV2262IP stock should be confirmed through the Request a Quote form on this page by providing the required quantity and target delivery date. The manufacturer’s part-details page confirms the TLV2262IP configuration, but live inventory changes across sales channels. For prototype evaluation, request the quantity needed for the build; for production, include your forecast and schedule so the supply response can reflect realistic lead time.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা TLV2262IP — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose TLV2262IP for a two-channel, low-voltage analog design that needs rail-to-rail output, low-power operation, and an 8-pin PDIP footprint. It is particularly appropriate for portable instrumentation, sensor conditioning, and low-voltage preamplifier stages where two independent channels are sufficient. TLV2264IP is appropriate when four channels are needed, but its channel organization and pin assignment must be compared with the target board rather than treated as an automatic substitution. If your priority is absolute minimum power, review the TLV225x family; if higher AC performance is more important than the TLV2262’s power balance, review TLC227x devices. Before final selection, compare input common-mode range, input offset, bias current, noise, bandwidth, slew rate, output drive, package, and lifecycle requirements using the official manufacturer documentation. For a genuinely pin-compatible replacement of TLV2262IP, require the same PDIP pin assignments and acceptable electrical performance rather than relying only on the words “dual operational amplifier.”

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য TLV2262IP TLV2264IP
Package 8-pin PDIP (P) 8-pin PDIP (P) 8-pin PDIP (P)
Brand Texas Instruments Texas Instruments Texas Instruments
Amplifier Channels 2 channels 2 channels 4 channels
Output Architecture Rail-to-rail output Rail-to-rail output Rail-to-rail output
Technology Advanced LinCMOS CMOS Advanced LinCMOS CMOS Advanced LinCMOS CMOS
Power Class Low-voltage, low-power Low-voltage, low-power Low-voltage, low-power
Family Positioning Compromise between TLV225x micro-power performance and TLC227x AC performance Dual-channel TLV226x family member Quad-channel TLV226x family member
Mounting Type Through-hole Through-hole Through-hole
Typical Application Focus Portable, low-voltage dual-channel signal conditioning Dual-channel portable signal conditioning Quad-channel portable signal conditioning

মূল পার্থক্যসমূহ

  • Two independent low-power amplifier channels in one package (বনামTLV2264IP)
  • Rail-to-rail output for low-voltage signal range (বনামConventional fixed-headroom operational amplifiers)
  • Low-power family positioning between micropower and higher-AC-performance options (বনামTLV225x and TLC227x families)

ডিজাইন নোট

Place the input, output, and feedback components close to their associated amplifier pins, and route the two channels to minimize shared-impedance coupling. The TLV2262IP uses a through-hole PDIP package, but short analog traces remain important even at low switching rates. Connect the power pins directly to a stable, locally bypassed supply and maintain the pin assignment shown in the manufacturer datasheet before finalizing the schematic.

The manufacturer positions the TLV2262 family as low-power for battery-powered systems, but the real supply budget depends on the selected supply voltage, channel activity, output load, and operating state. Review the per-amplifier quiescent current and load-current curves in the datasheet, then include both channels in the worst-case power calculation. Do not assume that the two channels can source their maximum output current simultaneously without checking the device limits.

Do not interpret rail-to-rail output as unrestricted common-mode input range or unlimited output swing. Verify where the input and output remain within their specified linear ranges at the actual supply voltage. Keep the feedback network stable under the expected capacitive load, and use an output isolation resistor if the load can introduce instability. Also check offset and bias-current errors before selecting very high resistor values for low-current sensor interfaces.

For low-level instrumentation, use a feedback topology that keeps both inputs within the usable common-mode region and calculate the maximum resistor value from the input bias-current specification. Place the matching feedback and gain-setting resistors close to the amplifier to reduce sensitivity to leakage and board contamination. Add a properly sized output isolation resistor when driving an ADC, cable, or other potentially capacitive load.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Compliance details were not stated in the manufacturer or distributor listing excerpts reviewed for TLV2262IP. Confirm the current declarations and orderable-part qualification information with Texas Instruments.

ডেটা যাচাই করা হয়েছে: 2026-11-19 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

TLV2262IP datasheet TLV2262IP pinout TLV2262IP datasheet pdf TLV2262IP equivalent TLV2262IP replacement TLV2262IP cross reference TLV2262IP vs TLV2264IP TLV2262IP PDIP pinout TLV2262IP application circuit Texas Instruments TLV2262IP TLV2262IP price TLV2262IP stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments TLV2262IP TLV2262 TLV2264IP TLV225x TLC227x dual operational amplifier CMOS operational amplifier Advanced LinCMOS rail-to-rail output amplifier low-power operational amplifier analog integrated circuit signal conditioning battery-powered instrumentation sensor interface industrial process measurement data acquisition input common-mode range input offset voltage input bias current gain bandwidth product quiescent current 8-pin PDIP PDIP package family through-hole technology
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন