Texas Instruments

TLV2451IP - 6V, 220kHz RRIO Low-Power Op Amp | Texas Instruments

MPN: TLV2451IP ✓ সক্রিয়
6 V Vdss 23 µA Id 8-pin PDIP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

TLV2451IP সারাংশ

Texas Instruments TLV2451IP is a single, 6 V, 220 kHz, low-quiescent-current operational amplifier with rail-to-rail input and output capability. It consumes 23 µA per channel and is offered in an 8-pin PDIP package for through-hole PCB assembly. The combination of low supply current, 220 kHz gain-bandwidth product, and rail-to-rail operation makes the device suitable for portable instrumentation, sensor interfaces, battery-powered measurement systems, and general-purpose analog signal conditioning.

An operational amplifier is a voltage-controlled, high-gain analog building block used to amplify, filter, buffer, compare, and drive signals. The TLV2451 belongs to the linear operational-amplifier family within the broader voltage-amplifier and analog IC hierarchy. Rail-to-rail input capability allows the amplifier to operate near the positive and negative supply limits, while rail-to-rail output operation permits the output voltage to approach the supply rails under suitable load conditions.

The principal features of the TLV2451IP are its 6 V maximum supply rating, 23 µA quiescent current, 220 kHz gain-bandwidth product, and single-amplifier configuration. Its low quiescent current reduces the supply demand of continuously powered circuits, while 220 kHz of bandwidth provides useful dynamic performance for low-frequency sensing, filtering, and control tasks. The PDIP format also supports conventional through-hole insertion, lead inspection, and straightforward prototyping.

Technically, the TLV2451 combines a micropower operating point with rail-to-rail input and output stages. This balance is valuable when signals must be sensed close to the supply rails but the application cannot tolerate the higher supply current of many conventional rail-to-rail amplifiers. Because the device is intended for low-voltage operation, its supply voltage and input common-mode range must be checked against the actual circuit. Exact offset, drift, output-current, noise, and stability limits should be confirmed in the manufacturer datasheet before a precision or capacitive-load design is released.

Typical applications include low-power sensor conditioning, portable medical instrumentation, industrial process measurement, battery-operated data acquisition, audio and communication interfaces, and general-purpose analog control loops. In these systems, the TLV2451IP can provide input buffering, gain amplification, active filtering, threshold detection, or low-frequency drive without requiring a high-bandwidth, high-current amplifier.

A key design consideration is stability with capacitive loading. The input and output network should follow the manufacturer datasheet guidance, especially when driving long PCB traces, ADC sample-and-hold inputs, multiplexers, or significant cable capacitance. Decoupling close to the supply pins, a suitable output isolation resistor, and a verified phase-margin margin are important for reliable low-power analog performance.

This page combines the TLV2451IP manufacturer specifications, verified sourcing information, same-family drop-in alternatives, pin assignment guidance, application-oriented engineering notes, and parameter-by-parameter comparison data. It is designed to support component selection, PCB compatibility checks, and first-pass circuit planning without replacing the manufacturer datasheet for production release.

এর জন্য ড্রপ-ইন বিকল্প TLV2451IP — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

TLV2451CP

✅ ড্রপ-ইন
📦 8-pin PDIP
Primary compared parameters show 0% measurable difference; both are single 6 V, 23 µA, 220 kHz RRIO amplifiers in the 8-pin PDIP format.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TLV2451CPE4

✅ ড্রপ-ইন
📦 8-pin PDIP
Primary compared parameters show 0% measurable difference; the suffix changes ordering or qualification conditions while retaining the 8-pin PDIP format and family performance.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TLV2451IP সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type Single operational amplifier
Maximum Supply Voltage 6 V
কুইসেন্ট কারেন্ট 23 µA
Gain-Bandwidth Product 220 kHz
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Channel Count 1 channel
প্যাকেজ 8-pin PDIP
মাউন্টিং টাইপ Through-hole
Product Classification General-purpose amplifier

TLV2451IP পিন কনফিগারেশন

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
পিন 1 NC — Not connected
পিন 2 IN- — Inverting input
পিন 3 IN+ — Non-inverting input
পিন 4 V- — Negative supply voltage
পিন 5 NC — Not connected
পিন 6 OUT — Output
পিন 7 V+ — Positive supply voltage
পিন 8 NC — Not connected

সাধারণ ব্যবহার

TLV2451IP এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Battery-Powered Sensor Signal Conditioning, Portable Medical Monitoring, Industrial Process Measurement, Low-Power Data Acquisition, Audio and Communication Interface, Precision Threshold and Control Loops.

🔋

Battery-Powered Sensor Signal Conditioning

The TLV2451IP fits low-power sensor front ends because its 23 µA quiescent current limits standing supply demand while its rail-to-rail input stage accepts signals operating close to the supply rails. It can buffer a bridge, resistive, or current-based sensor before amplification or conversion by an ADC. The 220 kHz gain-bandwidth product is suitable for low-frequency measurement signals rather than wideband instrumentation. Confirm the sensor's common-mode range, the amplifier's exact offset and drift limits, and the total current drawn by the complete analog chain before finalizing the power budget.

💊

Portable Medical Monitoring

The TLV2451IP is useful in portable monitoring modules where each amplifier contributes directly to battery life. Its 23 µA quiescent current is attractive for low-level physiological or diagnostic sensor conditioning, while rail-to-rail input and output operation helps use a restricted supply range efficiently. The 220 kHz bandwidth supports modest-bandwidth filtering and buffering. A medical design must still verify noise, offset, drift, common-mode behavior, and isolation requirements from the manufacturer datasheet rather than treating general-purpose performance as sufficient for every clinical measurement chain.

🏭

Industrial Process Measurement

The TLV2451IP can condition slow industrial sensor signals in compact control and monitoring equipment. Its 6 V maximum supply rating supports low-voltage process interfaces, and the single-amplifier 8-pin PDIP package simplifies through-hole construction and maintenance. Rail-to-rail operation helps preserve signal range in systems whose transducer output moves close to either supply rail. The 220 kHz gain-bandwidth product is adequate for many temperature, pressure, and level signals, but designers should verify input impedance, offset behavior, noise, and long-cable noise pickup for the installed sensor system.

📟

Low-Power Data Acquisition

The TLV2451IP fits multiplexed, low-speed data-acquisition systems where channel settling, input buffering, and supply efficiency matter. Its 220 kHz gain-bandwidth product can amplify sensor-level signals within a compact measurement front end, while the 23 µA quiescent current helps control the penalty of keeping the amplifier continuously powered. Rail-to-rail inputs are valuable when the ADC or sensor uses nearly the full available voltage range. Validate settling against the actual multiplexer resistance, sampling rate, ADC acquisition window, and source impedance before choosing gain and filtering values.

🎧

Audio and Communication Interface

The TLV2451IP can perform low-level buffering or gain stages in portable audio and communication interfaces when the signal bandwidth remains modest. Rail-to-rail input and output operation helps accommodate signals generated from a low-voltage supply, and the 23 µA quiescent current supports portable operation. The 220 kHz gain-bandwidth product is suitable for low-frequency control, microphone-bias buffering, or baseband conditioning rather than high-fidelity audio output stages. Check the required output swing, capacitive-load stability, noise performance, and channel-to-channel matching in the target operating point.

⚡

Precision Threshold and Control Loops

The TLV2451IP is appropriate for low-frequency threshold detection, comparator-like control, and small closed-loop analog systems powered from a 6 V-class rail. The 23 µA quiescent current reduces overhead in continuously monitored equipment, while the 220 kHz gain-bandwidth product provides more bandwidth than many similarly low-power amplifiers. Rail-to-rail output behavior can increase usable control range. For servo loops or precision threshold circuits, verify open-loop gain, phase margin, output-current capability, and the datasheet's stability recommendations under the actual feedback network.

Where to buy TLV2451IP online?
The TLV2451IP can be requested through the Request a Quote form on this page. The device is a Texas Instruments single operational amplifier supplied in an 8-pin PDIP package. Quote requests should state the required quantity, acceptable tube quantity, and delivery location so current inventory, lead time, and order handling can be confirmed for the exact TLV2451IP MPN.
What is the price of TLV2451IP?
Current TLV2451IP pricing is presented through the Request a Quote form on this page rather than as a static figure. The request should identify the exact 8-pin PDIP MPN and the required production quantity. This approach also allows a distributor to confirm authorized-channel availability, tube quantities, and any scheduled delivery information before the order is placed.
What is the lead time for TLV2451IP?
Lead time for the TLV2451IP should be confirmed through the Request a Quote form on this page. Lead time can depend on order quantity, authorized-channel inventory, and the number of tubes required. The Texas Instruments product page identifies TLV2451IP as an 8-pin PDIP device, allowing the quote request to be tied to the correct package and ordering suffix.
Is TLV2451IP in stock?
Current TLV2451IP stock status should be checked through the Request a Quote form on this page. Submit the required quantity and packaging preference to obtain an availability confirmation for the exact 8-pin PDIP part. Texas Instruments lists TLV2451IP as an active device, but active status does not by itself confirm current stock at every quantity.
What is the operating voltage of TLV2451IP?
The TLV2451IP is specified for operation from a low-voltage supply with a 6 V maximum supply rating. According to the Texas Instruments TLV2451 manufacturer datasheet, the device is a single rail-to-rail input/output operational amplifier designed around a 6 V supply limit. Use the datasheet's electrical-characteristics table for the exact recommended supply range and operating limits.
What are the key specifications of TLV2451IP that engineers should know?
The TLV2451IP combines a 6 V maximum supply rating, 23 µA quiescent current, 220 kHz gain-bandwidth product, and rail-to-rail input/output operation in one 8-pin PDIP package. According to the Texas Instruments product page and manufacturer datasheet, it is a single general-purpose amplifier intended for low-voltage, low-power analog systems where supply efficiency and signal-range flexibility are important.
Where to download the TLV2451IP datasheet PDF?
The official TLV2451 datasheet is available through Texas Instruments at https://www.ti.com/lit/gpn/TLV2451. It is the primary document for the complete TLV2451 family, including the 8-pin PDIP TLV2451IP ordering option. Use the pin configuration, recommended operating conditions, electrical characteristics, and application guidance in that manufacturer document for production design review.
Where to find the TLV2451IP pinout?
The TLV2451IP pinout is documented in the pin-configuration section of the Texas Instruments TLV2451 manufacturer datasheet. The 8-pin PDIP arrangement places the inverting input on pin 2, the non-inverting input on pin 3, the negative supply on pin 4, the output on pin 6, and the positive supply on pin 7. Pins 1, 5, and 8 are not connected for this single-amplifier configuration.
TLV2451IP vs TLV2451CP - which is better for a legacy through-hole design?
The TLV2451CP is the closest same-brand choice for a legacy through-hole design because its listed performance profile matches the TLV2451IP, including 23 µA quiescent current and 220 kHz gain-bandwidth product. The two devices are described as functionally equivalent with no measurable differences in their primary compared parameters. Temperature-grade, qualification, and ordering details should still be checked in the manufacturer documents before substitution.
What is the difference between TLV2451IP and TLV2451CPE4?
The TLV2451CPE4 belongs to the same TLV2451 family and is listed as functionally equivalent to the TLV2451IP in the available comparison data, with no measurable differences across the primary technical parameters. Both use the 8-pin PDIP form for pin-compatible through-hole placement. The ordering suffix distinguishes qualification or ordering conditions, so the exact suffix must be confirmed against the manufacturer datasheet before production release.
When should I choose TLV2451IP over TLV2451CP?
Choose the TLV2451IP when its exact ordering suffix, qualification conditions, and availability fit the intended product and process requirements. Choose the TLV2451CP when its suffix is the preferred catalog option for a legacy through-hole assembly and its manufacturer ordering information satisfies the application. Their published primary performance values are equivalent, making the decision principally about ordering, lifecycle, and qualification requirements rather than basic amplifier behavior.
Can TLV2451CP replace TLV2451IP in an existing PCB?
The TLV2451CP can serve as a pin-compatible candidate for an existing 8-pin PDIP TLV2451IP design because the available comparison identifies equivalent primary performance profiles and the same package format. Before substitution, verify the complete pin assignments, operating temperature grade, qualification status, supply limits, and stability requirements in the manufacturer datasheet. PCB changes are not expected when both ordered versions use the compatible 8-pin PDIP footprint.
What can replace TLV2451IP?
TLV2451CP is the clearest drop-in replacement candidate for the TLV2451IP because it retains the 8-pin PDIP format and is described as functionally equivalent across the primary technical parameters. TLV2451CPE4 is another same-family PDIP alternative with an equivalent listed profile. Both alternatives should undergo a final review of temperature grade, qualification, lifecycle, and exact ordering suffixes before they are approved for production.
Is the TLV2451IP suitable for battery-powered sensor interfaces?
The TLV2451IP is suitable for many battery-powered sensor interfaces because its 23 µA quiescent current is designed for low-power operation and its input stage is rail-to-rail. It can buffer or amplify signals from low-voltage sensors without requiring a higher-current rail-to-rail amplifier. For an exact design, include the sensor's output range, ADC input range, total amplifier current, and required bandwidth in the system power and signal-integrity review.
What design considerations matter for TLV2451IP capacitive loading?
The TLV2451IP should be checked carefully when driving capacitive loads because excessive output capacitance can reduce phase margin and cause oscillation. According to the Texas Instruments manufacturer datasheet guidance, stability depends on the load and output-current conditions. Keep PCB traces short, use a suitable series isolation resistor when recommended, and verify the completed circuit with the actual load and supply rather than relying only on nominal simulation.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা TLV2451IP — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the TLV2451IP for a low-voltage, low-power design that specifically requires a single rail-to-rail amplifier in an 8-pin PDIP package. Its 23 µA quiescent current and 220 kHz gain-bandwidth product are well matched to battery-powered sensing, portable measurement, process instrumentation, and low-frequency control circuits. Choose TLV2451CP when its exact ordering and qualification conditions are preferred for a legacy through-hole design; the available comparison reports equivalent primary performance and the same package. Choose TLV2451CPE4 when that suffix satisfies the required ordering or qualification conditions and the manufacturer's data confirms compatibility. In every case, review offset, drift, output current, stability, operating temperature, and lifecycle requirements before approving a substitution. If the circuit requires more bandwidth, lower noise, higher output current, or an automotive qualification, do not select solely on the shared PDIP footprint and 23 µA quiescent-current rating.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য TLV2451CP TLV2451CPE4
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP
Brand Texas Instruments Texas Instruments Texas Instruments
Amplifier Count 1 channel 1 channel 1 channel
Maximum Supply Voltage 6 V 6 V 6 V
Quiescent Current 23 µA 23 µA 23 µA
Gain-Bandwidth Product 220 kHz 220 kHz 220 kHz
Input Common-Mode Range Rail-to-rail Rail-to-rail Rail-to-rail
Output Swing Rail-to-rail Rail-to-rail Rail-to-rail
Mounting Type Through-hole Through-hole Through-hole
Primary Compared Parameters Reference device 0% measurable difference reported 0% measurable difference reported

মূল পার্থক্যসমূহ

  • Same-footprint replacement with no reported primary performance difference (বনামTLV2451CP)
  • Low-power operation without sacrificing rail-to-rail signal handling (বনামTLV2451CPE4)
  • Single-amplifier simplicity for low-voltage through-hole designs (বনামTLV2451CP)

ডিজাইন নোট

Account for both the 23 µA quiescent current and the additional supply current demanded by the output stage under load. The manufacturer's TLV2451 datasheet should be used to select the final operating point, especially when driving a resistive load or operating close to the output-current limit. For a battery design, include leakage from external resistors, protection devices, ADC channels, and the sensor because the amplifier's quiescent current alone does not determine total system consumption.

Do not assume that every low-power rail-to-rail amplifier can drive the intended load. Check the TLV2451 output-current capability, output-voltage limits, and capacitive-load stability from the manufacturer datasheet. Add a series isolation resistor when driving ADC inputs, multiplexers, long traces, or cables, and then verify settling and oscillation margin using the final source and load impedances.

Place the supply bypass capacitor close to pins 7 and 4, and keep the input and output paths short to reduce parasitic pickup and feedback. The 8-pin PDIP footprint provides generous spacing for through-hole assembly, but long loops around the amplifier can couple adjacent-channel signals into a high-impedance sensor node. Maintain a practical ground return and avoid routing sensitive input traces parallel to switching-conductor paths.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The available manufacturer and distributor information does not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements for the exact TLV2451IP ordering suffix. The device is a general-purpose operational amplifier rather than an automotive-qualified variant.

ডেটা যাচাই করা হয়েছে: 2026-11-15 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

TLV2451IP datasheet TLV2451IP pinout TLV2451IP datasheet pdf TLV2451IP equivalent TLV2451IP replacement TLV2451IP cross reference TLV2451IP footprint TLV2451IP spice model TLV2451IP price TLV2451IP stock Texas Instruments TLV2451IP TLV2451IP vs TLV2451CP

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments TLV2451IP TLV2451 TLV2451CP TLV2451CPE4 Operational amplifier Voltage amplifier Analog IC Single amplifier Rail-to-rail input Rail-to-rail output RRIO 23 µA quiescent current 220 kHz gain-bandwidth product 6 V maximum supply voltage PDIP-8 Through-hole package Surface-mount family Low-power electronics Battery-powered instrumentation Sensor signal conditioning Active filtering Common-mode range Capacitive-load stability
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন