Texas Instruments

TLV2470ID - 6V, 2.8MHz RRIO Op Amp | Texas Instruments

MPN: TLV2470ID ✓ সক্রিয়
6 V Vdss 600 µA/channel Id 8-pin SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

TLV2470ID সারাংশ

Texas Instruments TLV2470ID is a single, low-power, rail-to-rail input/output operational amplifier with shutdown, designed for a 6 V maximum supply and packaged in an 8-pin SOIC. Its three headline characteristics are a 2.8 MHz gain-bandwidth product, 600 µA/channel supply current, and rail-to-rail input and output operation. These characteristics place the TLV2470ID in the operational-amplifier hierarchy of analog ICs, signal-chain ICs, and general-purpose amplifiers.

A rail-to-rail input/output operational amplifier is designed to accept input voltages near either supply rail and to produce output voltages close to the positive or negative rail. This is useful in battery-powered and low-voltage systems where usable signal range is limited by the supply voltage. The TLV2470ID combines that input and output range with a shutdown function, allowing a system designer to reduce supply consumption when the amplifier is not needed.

The principal performance features include a 2.8 MHz gain-bandwidth product, 600 µA/channel supply current, and a CMOS input stage with a 2.5 pA bias current. Its high-drive capability supports applications where the amplifier must drive a relatively demanding capacitive or resistive load. Rail-to-rail operation also reduces the need for separate input and output range calculations when signals can approach either supply rail.

The TLV2470ID belongs to the TLV247x family of single and dual rail-to-rail operational amplifiers. According to the Texas Instruments TLV2470 family description, the family combines low power consumption with comparatively high AC performance for its operating class. The single amplifier in the 8-pin SOIC is suitable for general-purpose precision signal conditioning when a design needs one amplifier rather than a dual package.

Typical applications include portable sensor interfaces, low-voltage filter stages, audio input conditioning, battery-powered instrumentation, and general analog signal amplification. The shutdown pin is particularly useful in portable equipment because it can disable the amplifier when the system is inactive. Rail-to-rail inputs help preserve signal fidelity when sensor outputs approach the supply rails.

Designers should verify the required output-current capability, capacitive-load stability, input common-mode range, and operating temperature range for the selected ordering code. Place bypass capacitance close to the supply pins and keep feedback routing short because high-speed amplifiers can amplify trace resistance and parasitic capacitance into stability problems.

This page combines the TLV2470ID's core technical characteristics with package guidance, sourcing answers, application analysis, and same-family replacement considerations. It also identifies where a direct substitute requires verification of pinout, electrical limits, temperature grade, and shutdown behavior before PCB reuse.

এর জন্য ড্রপ-ইন বিকল্প TLV2470ID — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible TLV2470ID (একই form factor এবং footprint).

TLV2470AID

✅ ড্রপ-ইন
📦 8-pin SOIC
Retains the 6 V, 2.8 MHz, and 600 µA/channel headline ratings, a 0% difference in those three core parameters; revision-specific electrical limits still require comparison

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TLV2470AIP

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 8-pin SOIC
Same-family 6 V, 2.8 MHz, and 600 µA/channel ratings with 0% headline-parameter difference; the ordering temperature grade differs from TLV2470ID

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

TLV2470IP

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Texas Instruments
📦 8-pin SOIC
সামঞ্জস্যপূর্ণ স্পেসিফিকেশন

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

TLV2470ID সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type Single operational amplifier
Number of Circuits 1 circuit
Maximum Supply Voltage 6 V
Gain-Bandwidth Product 2.8 MHz
Supply Current per Channel 600 µA/channel
Input Bias Current 2.5 pA
Rail-to-Rail Input Yes
Rail-to-Rail Output Yes
Shutdown Control Yes
High-Drive Capability 600 mA/channel family description
প্যাকেজ 8-pin SOIC
মাউন্টিং টাইপ Surface mount

TLV2470ID 8-pin soic পিন কনফিগারেশন গাইড

TLV2470ID (8-pin soic প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

TLV2470ID-এর জন্য 8-pin soic প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি TLV2470ID.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

TLV2470ID এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Battery-Powered Sensor Interface, Low-Voltage Audio Input Conditioning, Portable Medical Sensor Signal Conditioning, Industrial Control Signal Amplification, Low-Power Active Filter, IoT Node Analog Interface.

📱

Battery-Powered Sensor Interface

The TLV2470ID fits low-voltage sensor front ends that need rail-to-rail input and output operation with low amplifier bias current. Its 2.5 pA CMOS input bias minimizes disturbance to high-impedance sensors, while rail-to-rail input capability helps preserve signals near the supply rails. The 600 µA/channel operating current also limits amplifier-related consumption in portable equipment. Place the device close to the sensor connector and bypass the supply pins locally; verify that input capacitance, source impedance, and the required noise gain do not compromise stability.

🎧

Low-Voltage Audio Input Conditioning

The TLV2470ID can amplify audio or microphone signals in a compact, low-voltage design because its input and output stages operate rail to rail. The 2.8 MHz gain-bandwidth product provides more bandwidth than the audio band requires, while the 600 µA/channel supply current supports power-conscious portable equipment. The shutdown function can disable the amplifier when the audio path is inactive. Confirm output-current capability into the next stage and check capacitive-load stability before adding headphone, microphone, or line-level loads.

💊

Portable Medical Sensor Signal Conditioning

The TLV2470ID is applicable to low-level signal conditioning in portable medical equipment when its input bias, bandwidth, and supply-current characteristics meet the sensing chain requirements. The 2.5 pA bias current is favorable for high-impedance sources, and the 2.8 MHz gain-bandwidth product supports moderate-bandwidth conditioning stages. A shutdown-controlled amplifier can reduce consumption during inactive measurement intervals. Medical use still requires validation of patient protection, leakage, diagnostic accuracy, and applicable regulatory requirements at the complete-system level.

🏭

Industrial Control Signal Amplification

The TLV2470ID is useful for amplifying control and instrumentation signals in a 6 V-class industrial system because its rail-to-rail inputs and outputs reduce the usable input and output range restrictions. The 2.8 MHz gain-bandwidth product supports general analog signal conditioning, while the shutdown input permits controlled deactivation of nonessential channels. Validate the exact operating-temperature grade for the installation environment, isolate noisy switching nodes, and use a stable reference design when the amplifier drives cables or substantial capacitive loads.

🔧

Low-Power Active Filter

The TLV2470ID can serve as the active element in a low-voltage filter when the required closed-loop bandwidth stays below the device's 2.8 MHz gain-bandwidth product. Its 600 µA/channel supply current is suitable for compact battery-powered instrumentation, and rail-to-rail operation can extend signal swing in low-voltage filter stages. Select resistor values for the intended noise gain, place feedback components close to the device, and check stability because high-Q filters and long PCB traces can create excessive phase shift.

🧩

IoT Node Analog Interface

The TLV2470ID fits an IoT node that conditions a sensor output before conversion or digital sampling. The 2.8 MHz bandwidth handles many sensor signals, the 2.5 pA input bias reduces loading on high-impedance sources, and the 600 µA/channel supply current supports constrained power budgets. The shutdown function allows the analog path to remain disabled during inactive intervals. Keep the amplifier and its bypass capacitor near the sensor interface, maintain a short ground path, and account for ADC settling requirements in the overall acquisition chain.

What are the key specifications of TLV2470ID that engineers should know?
The TLV2470ID is a single rail-to-rail input/output operational amplifier with a 6 V maximum supply, 2.8 MHz gain-bandwidth product, and 600 µA/channel supply current. According to the Texas Instruments TLV2470 product page, it also includes a shutdown function, and the device is offered in an 8-pin SOIC package. Its CMOS input stage is associated with a 2.5 pA bias current, making it useful where low amplifier input bias is important.
What is the operating voltage of TLV2470ID?
The TLV2470ID supports a maximum supply voltage of 6 V according to the Texas Instruments TLV2470 product page. The operating supply range must remain within the device's absolute-maximum and recommended-condition limits, so a 5 V rail is the nominal high-side design target for this part. Confirm the complete input, output, and common-mode limits in the manufacturer datasheet before selecting resistor values or external supply tolerances.
Is TLV2470ID rail-to-rail input and output?
Yes, the TLV2470ID provides rail-to-rail input and rail-to-rail output operation. According to the Texas Instruments TLV2470 family description, this allows the amplifier to handle signals near the supply rails and produce output swing close to those rails. The exact input common-mode and output-swing boundaries should still be checked in the manufacturer datasheet because those limits can depend on supply voltage and load.
What is the gain-bandwidth product of TLV2470ID?
The TLV2470ID has a 2.8 MHz gain-bandwidth product. According to the Texas Instruments TLV2470 family description, the TLV247x family combines this AC bandwidth with a supply current of 600 µA per channel. The gain-bandwidth product determines the approximate closed-loop bandwidth at a given noise gain, so a 10-times noise-gain configuration will have a much lower usable bandwidth than a unity-gain configuration.
Where can I download the TLV2470ID datasheet PDF?
The official TLV2470ID documentation is available from the Texas Instruments TLV2470 product page, which links to the manufacturer datasheet and supporting ordering information. A separate PDF copy is also listed at the DiGi-Electronics document URL. For design authority, use the Texas Instruments document and confirm that the TLV2470ID ordering information, DBV package drawing, electrical characteristics, and revision history apply to the exact assembled part.
Where can I find the TLV2470ID pinout?
The TLV2470ID uses an 8-pin DBV SOIC package, and its complete pin assignment should be taken from the pin-description table in the Texas Instruments manufacturer datasheet. Use that table when assigning OUT, V+, V−, and control connections on the PCB. The product listing confirms the package family, but it does not itself replace the manufacturer pin-description table when each terminal's electrical function and no-connect status must be verified.
Where can I buy TLV2470ID online and what is its current price?
Use the Request a Quote form on this page to request current TLV2470ID pricing, stock, and lead time for the exact 8-pin SOIC ordering code. The structured offer updates with current commercial data, while a direct quote is appropriate when quantity, date code, traceability, or shipment requirements need confirmation. Pricing should not be inferred from a family listing because other TLV247x package and channel configurations are different devices.
What is the lead time for TLV2470ID?
Request the current TLV2470ID lead time through the Request a Quote form on this page and include the required order quantity and target shipment date. Lead time can change with inventory position, production scheduling, package choice, and order configuration. For new production programs, request an allocation and date-code commitment rather than relying on a generic family-level availability statement.
Is TLV2470ID in stock?
Current TLV2470ID inventory should be confirmed through the Request a Quote form on this page. Stock status can vary by package, order quantity, and fulfillment timing, so a family-level statement does not establish availability of the exact 8-pin SOIC device. The form allows a buyer to request current quantity, lead time, and shipment information for production planning.
What can replace TLV2470ID?
The TLV2470AID is the closest same-family candidate identified for review because it retains the single-amplifier, 6 V, 2.8 MHz, 600 µA/channel operating framework in the same 8-pin SOIC class. According to the Texas Instruments TLV2470 family description, the A-version is a family revision, so a replacement should be checked for offset, bias, noise, shutdown timing, and temperature-grade changes. Pin compatibility alone is not enough for an unconditional production substitution.
Is TLV2470AID the same as TLV2470ID?
TLV2470AID is a related same-family orderable version of the TLV2470ID, not an automatically identical device. The headline 6 V supply, 2.8 MHz gain-bandwidth product, 600 µA/channel supply current, rail-to-rail architecture, and 8-pin SOIC class remain the basis for drop-in consideration. Before replacing one with the other, compare the exact electrical characteristics and ordering temperature grade in the Texas Instruments manufacturer datasheet.
TLV2470ID vs TLV2470AID — which is better for a low-voltage sensor interface?
Choose the TLV2470AID only after confirming that its electrical characteristics meet the sensor-interface requirements and that its ordering grade matches the deployment environment. The TLV2470AID is attractive because it remains in the same 8-pin SOIC family and retains the 6 V, 2.8 MHz, and 600 µA/channel headline performance framework. Compare input offset, input bias, noise, common-mode limits, output swing, and shutdown behavior before finalizing the substitution.
When should I choose TLV2470ID over TLV2470AID?
Choose the TLV2470ID when its specified electrical limits, temperature grade, and lifecycle position have been validated for the production design and the TLV2470AID does not improve a required parameter. The TLV2470AID may be preferable when its revision-specific characteristics satisfy the application and qualification requirements. The decision should be based on a side-by-side datasheet comparison rather than on the ordering suffix alone.
Is TLV2470ID suitable for battery-powered sensor interfaces?
The TLV2470ID is well suited to low-power sensor interfaces because it combines rail-to-rail input and output operation with 600 µA/channel supply current and a 2.8 MHz gain-bandwidth product. According to the Texas Instruments TLV2470 product page, the shutdown function can further reduce consumption when the signal path is inactive. For battery designs, total quiescent current, active shutdown current, leakage, and the sensor's own current must be evaluated together.
How should decoupling and feedback routing be designed for TLV2470ID?
Place the supply bypass capacitor close to the positive and negative supply pins, and keep the feedback loop compact around the amplifier. According to the Texas Instruments TLV2470 family description, the device provides high-drive capability and 2.8 MHz bandwidth, which can make excessive loop area, trace resistance, and parasitic capacitance more consequential. Verify capacitive-load stability and ground-return paths in the manufacturer datasheet before increasing trace length or adding large load capacitors.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা TLV2470ID — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the TLV2470ID when a compact, low-voltage design needs one rail-to-rail input/output amplifier with a 2.8 MHz gain-bandwidth product, 600 µA/channel supply current, and shutdown control. It is a practical fit for portable sensor interfaces, low-voltage audio conditioning, and compact active filters. Consider the TLV2470AID when its revised electrical characteristics provide a measurable advantage or better alignment with current production requirements; verify offset, noise, bias, timing, and temperature-grade differences before replacing the TLV2470ID. Consider the TLV2470AIP or TLV2470IP when their ordering temperature grades match the deployment environment, but confirm the same electrical limits and qualification expectations. No cross-brand drop-in candidate was identified with enough package, pinout, and parameter information to recommend unconditionally. For any substitution, compare the manufacturer pin table, absolute-maximum ratings, recommended operating conditions, shutdown logic, output-swing limits, input common-mode range, and capacitive-load behavior rather than relying only on matching package names.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য TLV2470AID TLV2470AIP TLV2470IP
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit
Maximum Supply Voltage 6 V 6 V 6 V 6 V
Gain-Bandwidth Product 2.8 MHz 2.8 MHz 2.8 MHz 2.8 MHz
Supply Current per Channel 600 µA/channel 600 µA/channel 600 µA/channel 600 µA/channel
Rail-to-Rail Input Yes Yes Yes Yes
Rail-to-Rail Output Yes Yes Yes Yes
Shutdown Function Yes Yes Yes Yes

মূল পার্থক্যসমূহ

  • Combines shutdown control with low supply current and moderate bandwidth (বনামTLV2470AID)
  • Rail-to-rail operation supports use of nearly the full low-voltage signal range (বনামTLV2470IP)
  • Single-amplifier configuration reduces package size for one-channel designs (বনামTLV2470AIP)

ডিজাইন নোট

Place the supply bypass capacitor adjacent to the positive and negative pins, and route each supply trace directly to the device. Keep the feedback loop compact and use a continuous ground plane beneath the amplifier. Because the TLV2470ID combines a 2.8 MHz gain-bandwidth product with high-drive capability, long feedback traces and parasitic capacitance can reduce phase margin or produce unexpected oscillation.

Do not assume that rail-to-rail input and output means the amplifier can swing exactly to the rails. Consult the manufacturer datasheet for output-swing and common-mode limits at the intended supply voltage and load. Also account for the voltage drop across the shutdown-control connection. Undefined shutdown voltage or excessive input voltage can move the device outside its specified operating conditions.

Estimated: at a 5 V supply, a 1 kΩ load, and an output of 2.5 V, the output stage would dissipate approximately 6.25 mW, while the amplifier's stated 600 µA/channel supply current corresponds to roughly 3 mW from a 5 V rail. Actual total power depends on quiescent current, output-current direction, supply voltage, and shutdown state. Use these estimates only for an early power-budget check.

For high-impedance sources, minimize leakage around the input node and avoid contaminated board areas. The 2.5 pA input bias is favorable for source resistance, but input capacitance and resistor thermal noise may still dominate. For an active filter, select gain-bandwidth and noise-gain headroom carefully and simulate the complete loop with PCB parasitics before fabricating the board.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Compliance attributes were not stated in the manufacturer page or other listed product information. Qualification status must be confirmed for the exact ordering code before use in regulated or automotive designs.

ডেটা যাচাই করা হয়েছে: 2026-11-10 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

TLV2470ID datasheet TLV2470ID pinout TLV2470ID datasheet pdf TLV2470ID 8-SOIC pinout TLV2470ID specifications TLV2470ID 6V 2.8MHz TLV2470ID application circuit TLV2470ID equivalent TLV2470ID replacement TLV2470ID vs TLV2470AID Texas Instruments TLV2470ID TLV2470ID price TLV2470ID stock TLV2470ID shutdown pin TLV2470ID rail to rail op amp

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments TLV2470ID TLV2470AID TLV2470AIP TLV2470IP operational amplifier precision amplifier rail-to-rail input/output amplifier RRIO amplifier CMOS operational amplifier signal-conditioning IC analog IC gain-bandwidth product GBWP input bias current shutdown function SOIC-8 DBV package surface-mount package low-voltage power supply battery-powered instrumentation sensor interface active filter audio preamplifier high-drive operational amplifier
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন