TMS320BC51PZ80 - 80MHz Fixed-Point DSP | Texas Instruments
MPN: TMS320BC51PZ80 ✓ সক্রিয়TMS320BC51PZ80 সারাংশ
A digital signal processor, or DSP, is a semiconductor optimized to execute mathematical operations on sampled signals. Unlike a general-purpose microprocessor, a DSP typically combines a dedicated arithmetic architecture with deterministic instruction timing and serial interface support. The TMS320BC51 belongs to the broader hierarchy of embedded processors, digital signal processors, processors, and semiconductors, placing it between general-purpose control processors and specialized fixed-point processing engines.
The 80 MHz clock rate gives the processor an 12.5 ns instruction-cycle interval at its rated operating frequency. Its 16-bit fixed-point CPU architecture is suitable for filtering, signal transformation, control processing, and embedded communications. The manufacturer describes single-cycle execution times of 25 ns, 35 ns, and 50 ns for 5 V operation, while 3 V operation is described at 25 ns, 40 ns, and 50 ns. Onboard ROM and RAM support the embedded software and working-data requirements of compact control systems.
Communication peripherals provide a practical distinction between this DSP and a simple arithmetic accelerator. BSP and SSP connections support synchronous serial data transfer, while the TDM interface supports time-division-multiplexed traffic. These interfaces can connect the processor to converters, transceivers, codecs, or other digital signal-chain equipment without requiring a separate bus controller. Exact peripheral ratings, memory details beyond the stated capacities, and operating limits must be confirmed against the manufacturer datasheet before final design release.
Typical uses include industrial motor-control and automation systems, communications equipment, audio and voice processing, telemetry, measurement instrumentation, and embedded real-time signal processing. A compact 100-LQFP package can simplify board assembly compared with larger processor packages, but the 14 mm by 14 mm body is still larger than most small-outline packages. Careful planning is therefore necessary where board area, connector density, heat dissipation, and signal routing are significant constraints.
Designers should preserve the processor's supply, clock, reset, and decoupling requirements around the package. Because this part combines a high-frequency DSP core with multiple serial interfaces, short clock routes, stable reference planes, adequate bypass capacitance, and controlled return paths help reduce signal-integrity risks. The memory interfaces and all peripheral connections should be checked against the pin-description table in the manufacturer datasheet before assigning PCB nets.
This product page combines the confirmed manufacturer-style characteristics, package information, interface features, and engineering guidance into a design-focused view. It also distinguishes pin-compatible family alternatives from parts that require a different package or software migration, helping engineers assess whether a replacement can reuse the existing PCB and code base.
এর জন্য ড্রপ-ইন বিকল্প TMS320BC51PZ80 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible TMS320BC51PZ80 (একই form factor এবং footprint) — পার্থক্য রয়েছে Processor Type.
TMS320BC51PZL80
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
TMS320BC51PZ100
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →TMS320BC51PZ80 বিশেষণ
| Processor Type | Fixed-point digital signal processor (DSP) |
| Clock Frequency | 80 MHz |
| CPU Word Length | 16 bit |
| Program Memory | 16 kB ROM |
| Data Memory | 4 kB RAM |
| সাপ্লাই ভোল্টেজ | 5 V |
| প্যাকেজ | 100-LQFP (14 mm x 14 mm) |
| পিন সংখ্যা | 100 pins |
| মাউন্টিং টাইপ | Surface mount |
| BSP Interface | Supported |
| SSP Interface | Supported |
| TDM Interface | Supported |
| Single-Cycle Execution Time at 5 V | 25 ns, 35 ns, or 50 ns |
| Single-Cycle Execution Time at 3 V | 25 ns, 40 ns, or 50 ns |
| RoHS Classification | RoHS3 |
TMS320BC51PZ80 100-lqfp (14 mm x 14 mm) পিন কনফিগারেশন গাইড
TMS320BC51PZ80 (100-lqfp (14 mm x 14 mm) প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি TMS320BC51PZ80.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
TMS320BC51PZ80 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Motor Control, Digital Audio Processing, Telemetry and Remote Measurement, Communications Interface Equipment, Test and Measurement Instrumentation, Industrial Automation and Control.
Industrial Motor Control
The TMS320BC51PZ80 fits compact fixed-point motor-control loops that require predictable execution at an 80 MHz clock rate. Its 16-bit CPU can process current and position-control calculations, while the BSP and SSP interfaces provide paths to encoder, resolver, or position-sensor conditioning hardware. The 4 kB RAM supports time-critical working data, while 16 kB ROM can hold boot code or a focused control program when the complete application fits. Designers should keep the control loop separate from slower supervisory tasks and verify worst-case execution time under the intended clock and memory configuration. External gate drivers, current sensing, overvoltage protection, and a properly designed power stage remain necessary because the DSP itself is a controller, not a power converter.
সুপারিশকৃত
Digital Audio Processing
The TMS320BC51PZ80 is appropriate for embedded voice, audio-filter, and sound-processing functions where deterministic 16-bit fixed-point execution is preferred. An SSP or BSP connection can link the processor to a digital-to-analog converter, analog-to-digital converter, or audio codec, while the 80 MHz operating rate allows filters and mixing operations to execute within a defined sampling interval. The 4 kB RAM should be budgeted carefully for sample buffers and state variables, and the 16 kB ROM limits the size of resident code. Designers should include de-emphasis, gain control, and output smoothing in system validation, while checking the converter’s clock, serial format, and latency requirements against the DSP timing model.
সুপারিশকৃত
Telemetry and Remote Measurement
The TMS320BC51PZ80 can serve as the real-time signal-processing core of a telemetry or remote measurement system. Its fixed-point CPU can condition sensor-derived samples, perform calibration arithmetic, and prepare results for transmission, while BSP, SSP, and TDM interfaces support synchronous links to converters and communications hardware. The 80 MHz clock rate provides useful computational margin for filters and digital compensation without requiring a general-purpose host processor. A practical implementation should reserve RAM for acquisition buffers, use the ROM for the most time-critical routines, and establish separate paths for control traffic and measurement data. End-to-end validation should cover converter timing, channel multiplexing, data framing, error detection, and operation across the full temperature range.
সুপারিশকৃত
Communications Interface Equipment
The TMS320BC51PZ80 is suitable for embedded communications equipment that combines signal transformation with synchronous serial connectivity. The processor’s SSP and BSP peripherals can interface with codecs, converters, and transceiver-facing devices, while its TDM support is useful when several channels share a time-divided frame. At 80 MHz, fixed-point algorithms can perform filtering, modulation-related arithmetic, framing, and channel control in real time. The 100-LQFP package provides the required signal breakout but demands disciplined board planning around clock, serial data, and return paths. Designers should determine whether 4 kB RAM and 16 kB ROM satisfy the application; a larger-memory processor may be preferable when buffering, protocol stacks, or multiple concurrent channels exceed those resources.
সুপারিশকৃত
Test and Measurement Instrumentation
The TMS320BC51PZ80 can serve as the computation engine in compact test and measurement equipment that performs real-time waveform conditioning, calibration, and digital filtering. Its 16-bit fixed-point architecture supports integer-oriented signal calculations, while the serial interfaces can connect to high-speed converters or external data-acquisition components. The 80 MHz clock rate allows multiple processing stages to execute between samples, and the 4 kB RAM can hold acquisition and processing state for suitably sized blocks. System designers must carefully partition data memory, apply scaling to avoid overflow, and validate numerical accuracy across the full input range. External references, analog front ends, excitation sources, and isolation remain system-level responsibilities rather than functions integrated into the processor.
সুপারিশকৃত
Industrial Automation and Control
The TMS320BC51PZ80 supports embedded automation modules that must combine sensor conditioning, control calculations, and serial coordination in one deterministic processor. Its 80 MHz fixed-point CPU is suited to proportional-integral-derivative loops, filtering, state estimation, and actuator-command generation, while BSP and SSP interfaces reduce the need for separate communication controllers. The 16 kB ROM and 4 kB RAM are appropriate for focused controllers with carefully bounded workloads, but they require explicit memory budgeting. In a deployed system, the designer should define startup behavior, watchdog recovery, fault outputs, and safe-state transitions independently of the normal control software. Communication timing and peripheral assignments must be checked against the manufacturer pin table so the 100-LQFP footprint is implemented consistently.
সুপারিশকৃত
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা TMS320BC51PZ80 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | TMS320BC51PZL80 | TMS320BC51PZ100 |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 100-LQFP (14 mm x 14 mm) | 100-LQFP (14 mm x 14 mm) | 100-LQFP (14 mm x 14 mm) |
| Processor Type | Fixed-point digital signal processor (DSP) | Fixed-point digital signal processor (DSP) | Fixed-point digital signal processor (DSP) |
| Clock Frequency | 80 MHz | 80 MHz | 100 MHz |
| CPU Word Length | 16 bit | 16 bit | 16 bit |
মূল পার্থক্যসমূহ
- Targeted 80 MHz configuration (বনামTMS320BC51PZ100)
- Confirmed integrated memory configuration (বনামTMS320BC51PZL80)
- Three named synchronous interface families (বনামTMS320BC51PZL80)
ডিজাইন নোট
Treat the clock, reset, and serial interfaces as sensitive routes on the 100-LQFP footprint. Keep clock traces short, provide a continuous reference plane beneath them, avoid switching-node crossings, and place decoupling capacitors close to the associated supply pins. Because the package has many leads, pin-by-pin net assignment should be completed from the manufacturer datasheet before the component footprint and placement are released.
Use the manufacturer’s recommended supply topology and bypass arrangement for the 5 V operating condition. Separate analog-sensitive returns from digital return currents where the application provides separate pins, and maintain low-impedance connections between ground pins and the relevant plane. Review the power-up sequence, reset behavior, and external regulator tolerance under maximum processor activity so the core supply never enters an unspecified state.
Do not treat a shared package name as proof of complete interchangeability. Before replacing TMS320BC51PZ80, compare every pin name, supply limit, clock input, memory interface signal, and peripheral function, then confirm that the software model, timing, and production-temperature grade remain suitable. A 100-pin package match alone cannot compensate for a changed serial function, ground arrangement, or interrupt topology.
Budget acquisition and processing latency before selecting a communication or audio converter. Clock phase, serial frame boundaries, TDM slot allocation, and synchronization must be verified at the system level. Use controlled-impedance routing where the interface rate requires it, keep the processor clock away from sensitive analog inputs, and validate signal margins using the worst-case operating configuration rather than a nominal test pattern.
কমপ্লায়েন্স তথ্য
The product listing identifies RoHS3 compliance. No additional REACH, halogen-free, conflict-minerals, or automotive qualification declaration was established.