Texas Instruments

TMS320BC51PZ80 - 80MHz Fixed-Point DSP | Texas Instruments

MPN: TMS320BC51PZ80 ✓ Aktif
5 V Vdss 100-LQFP (14 mm x 14 mm) Package 80 MHz Speed 16 kB ROM Memory
MOQ: 1 |

TMS320BC51PZ80 Ringkasan

Texas Instruments TMS320BC51PZ80 is a fixed-point digital signal processor operating at 80 MHz, with 16 kB of ROM, 4 kB of RAM, and a 100-pin LQFP package measuring 14 mm by 14 mm. The processor is designed for 5 V operation and supports BSP, SSP, and TDM interfaces for designs that require deterministic signal processing, serial communications, and real-time data transfer.

A digital signal processor, or DSP, is a semiconductor optimized to execute mathematical operations on sampled signals. Unlike a general-purpose microprocessor, a DSP typically combines a dedicated arithmetic architecture with deterministic instruction timing and serial interface support. The TMS320BC51 belongs to the broader hierarchy of embedded processors, digital signal processors, processors, and semiconductors, placing it between general-purpose control processors and specialized fixed-point processing engines.

The 80 MHz clock rate gives the processor an 12.5 ns instruction-cycle interval at its rated operating frequency. Its 16-bit fixed-point CPU architecture is suitable for filtering, signal transformation, control processing, and embedded communications. The manufacturer describes single-cycle execution times of 25 ns, 35 ns, and 50 ns for 5 V operation, while 3 V operation is described at 25 ns, 40 ns, and 50 ns. Onboard ROM and RAM support the embedded software and working-data requirements of compact control systems.

Communication peripherals provide a practical distinction between this DSP and a simple arithmetic accelerator. BSP and SSP connections support synchronous serial data transfer, while the TDM interface supports time-division-multiplexed traffic. These interfaces can connect the processor to converters, transceivers, codecs, or other digital signal-chain equipment without requiring a separate bus controller. Exact peripheral ratings, memory details beyond the stated capacities, and operating limits must be confirmed against the manufacturer datasheet before final design release.

Typical uses include industrial motor-control and automation systems, communications equipment, audio and voice processing, telemetry, measurement instrumentation, and embedded real-time signal processing. A compact 100-LQFP package can simplify board assembly compared with larger processor packages, but the 14 mm by 14 mm body is still larger than most small-outline packages. Careful planning is therefore necessary where board area, connector density, heat dissipation, and signal routing are significant constraints.

Designers should preserve the processor's supply, clock, reset, and decoupling requirements around the package. Because this part combines a high-frequency DSP core with multiple serial interfaces, short clock routes, stable reference planes, adequate bypass capacitance, and controlled return paths help reduce signal-integrity risks. The memory interfaces and all peripheral connections should be checked against the pin-description table in the manufacturer datasheet before assigning PCB nets.

This product page combines the confirmed manufacturer-style characteristics, package information, interface features, and engineering guidance into a design-focused view. It also distinguishes pin-compatible family alternatives from parts that require a different package or software migration, helping engineers assess whether a replacement can reuse the existing PCB and code base.

Pilihan pengganti yang segera untuk TMS320BC51PZ80 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera TMS320BC51PZ80 (sama faktor bentuk dan kaki) — berbeza dalam Processor Type.

Texas Instruments
Processor Type: Fixed-Point Digital Signal Processor
Bandingkan Dengan TMS320BC51PZ80 →

TMS320BC51PZL80

✅ Masuk Drop-In
📦 100-LQFP (14 mm x 14 mm)
Same TMS320BC51PZ family and 80 MHz designation; ordering-suffix differences require final pin, temperature-grade, and electrical-limit confirmation.

📋 Alternatif rujukan (tidak dalam katalog)

TMS320BC51PZ100

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Texas Instruments
📦 100-LQFP (14 mm x 14 mm)
Fixed-Point Digital Signal Processor · 16 bit · 100 MHz · 50 MIPS · TMS320 fixed-point DSP · 100-LQFP · 14 x 14 mm · 100

Hubungi untuk harga

Lihat Datasheet →

TMS320BC51PZ80 Spesifikasi

Processor Type Fixed-point digital signal processor (DSP)
Clock Frequency 80 MHz
CPU Word Length 16 bit
Program Memory 16 kB ROM
Data Memory 4 kB RAM
Tegangan Pemberi Arus 5 V
Kemasan 100-LQFP (14 mm x 14 mm)
Kiraan Pin 100 pins
Jenis Pemasangan Surface mount
BSP Interface Supported
SSP Interface Supported
TDM Interface Supported
Single-Cycle Execution Time at 5 V 25 ns, 35 ns, or 50 ns
Single-Cycle Execution Time at 3 V 25 ns, 40 ns, or 50 ns
RoHS Classification RoHS3

Panduan Konfigurasi Pin TMS320BC51PZ80 100-lqfp (14 mm x 14 mm)

Konfigurasi pin untuk TMS320BC51PZ80 (100-lqfp (14 mm x 14 mm) pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 100-lqfp (14 mm x 14 mm) untuk TMS320BC51PZ80

Tiada data garisan pin yang diperoleh untuk TMS320BC51PZ80.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

TMS320BC51PZ80 patut untuk 6 aplikasis: Industrial Motor Control, Digital Audio Processing, Telemetry and Remote Measurement, Communications Interface Equipment, Test and Measurement Instrumentation, Industrial Automation and Control.

🏭

Industrial Motor Control

The TMS320BC51PZ80 fits compact fixed-point motor-control loops that require predictable execution at an 80 MHz clock rate. Its 16-bit CPU can process current and position-control calculations, while the BSP and SSP interfaces provide paths to encoder, resolver, or position-sensor conditioning hardware. The 4 kB RAM supports time-critical working data, while 16 kB ROM can hold boot code or a focused control program when the complete application fits. Designers should keep the control loop separate from slower supervisory tasks and verify worst-case execution time under the intended clock and memory configuration. External gate drivers, current sensing, overvoltage protection, and a properly designed power stage remain necessary because the DSP itself is a controller, not a power converter.

🎧

Digital Audio Processing

The TMS320BC51PZ80 is appropriate for embedded voice, audio-filter, and sound-processing functions where deterministic 16-bit fixed-point execution is preferred. An SSP or BSP connection can link the processor to a digital-to-analog converter, analog-to-digital converter, or audio codec, while the 80 MHz operating rate allows filters and mixing operations to execute within a defined sampling interval. The 4 kB RAM should be budgeted carefully for sample buffers and state variables, and the 16 kB ROM limits the size of resident code. Designers should include de-emphasis, gain control, and output smoothing in system validation, while checking the converter’s clock, serial format, and latency requirements against the DSP timing model.

🌐

Telemetry and Remote Measurement

The TMS320BC51PZ80 can serve as the real-time signal-processing core of a telemetry or remote measurement system. Its fixed-point CPU can condition sensor-derived samples, perform calibration arithmetic, and prepare results for transmission, while BSP, SSP, and TDM interfaces support synchronous links to converters and communications hardware. The 80 MHz clock rate provides useful computational margin for filters and digital compensation without requiring a general-purpose host processor. A practical implementation should reserve RAM for acquisition buffers, use the ROM for the most time-critical routines, and establish separate paths for control traffic and measurement data. End-to-end validation should cover converter timing, channel multiplexing, data framing, error detection, and operation across the full temperature range.

📡

Communications Interface Equipment

The TMS320BC51PZ80 is suitable for embedded communications equipment that combines signal transformation with synchronous serial connectivity. The processor’s SSP and BSP peripherals can interface with codecs, converters, and transceiver-facing devices, while its TDM support is useful when several channels share a time-divided frame. At 80 MHz, fixed-point algorithms can perform filtering, modulation-related arithmetic, framing, and channel control in real time. The 100-LQFP package provides the required signal breakout but demands disciplined board planning around clock, serial data, and return paths. Designers should determine whether 4 kB RAM and 16 kB ROM satisfy the application; a larger-memory processor may be preferable when buffering, protocol stacks, or multiple concurrent channels exceed those resources.

🖥️

Test and Measurement Instrumentation

The TMS320BC51PZ80 can serve as the computation engine in compact test and measurement equipment that performs real-time waveform conditioning, calibration, and digital filtering. Its 16-bit fixed-point architecture supports integer-oriented signal calculations, while the serial interfaces can connect to high-speed converters or external data-acquisition components. The 80 MHz clock rate allows multiple processing stages to execute between samples, and the 4 kB RAM can hold acquisition and processing state for suitably sized blocks. System designers must carefully partition data memory, apply scaling to avoid overflow, and validate numerical accuracy across the full input range. External references, analog front ends, excitation sources, and isolation remain system-level responsibilities rather than functions integrated into the processor.

🔧

Industrial Automation and Control

The TMS320BC51PZ80 supports embedded automation modules that must combine sensor conditioning, control calculations, and serial coordination in one deterministic processor. Its 80 MHz fixed-point CPU is suited to proportional-integral-derivative loops, filtering, state estimation, and actuator-command generation, while BSP and SSP interfaces reduce the need for separate communication controllers. The 16 kB ROM and 4 kB RAM are appropriate for focused controllers with carefully bounded workloads, but they require explicit memory budgeting. In a deployed system, the designer should define startup behavior, watchdog recovery, fault outputs, and safe-state transitions independently of the normal control software. Communication timing and peripheral assignments must be checked against the manufacturer pin table so the 100-LQFP footprint is implemented consistently.

What is the TMS320BC51PZ80?
The TMS320BC51PZ80 is a Texas Instruments fixed-point digital signal processor rated at 80 MHz, with a 16-bit CPU, 16 kB of ROM, 4 kB of RAM, and a 100-pin LQFP package. Its BSP, SSP, and TDM interfaces support deterministic serial data movement. According to the manufacturer datasheet, it is intended for embedded real-time signal-processing and control systems operating from a 5 V supply.
What are the key specifications of TMS320BC51PZ80?
The principal TMS320BC51PZ80 specifications are an 80 MHz clock, 16-bit fixed-point CPU, 16 kB ROM, 4 kB RAM, and a 100-LQFP package measuring 14 mm by 14 mm. The device also supports BSP, SSP, and TDM interfaces and is identified for 5 V operation. The manufacturer datasheet additionally lists 25 ns, 35 ns, and 50 ns single-cycle execution times for 5 V operation.
What package does TMS320BC51PZ80 use?
The TMS320BC51PZ80 uses a 100-pin LQFP package with a stated body size of 14 mm by 14 mm. The package designation and pin count should be treated as different design constraints: the 100-lead footprint controls PCB compatibility, while the 14 mm body size affects routing space around the device. Use the manufacturer datasheet pin-description table when assigning signals and defining the land pattern.
Where can I download the TMS320BC51PZ80 datasheet PDF?
The TMS320BC51PZ80 datasheet is available through the Texas Instruments product documentation and through the manufacturer-linked document archive. The accessible manufacturer datasheet index identifies the device as part of the TMS320BC51 digital signal processor family. Open the datasheet from this page and use its pin-description and electrical-characteristics tables as the authoritative references for final schematic and layout decisions.
Where can I find the TMS320BC51PZ80 pinout?
The TMS320BC51PZ80 pinout is located in the pin-description table of the manufacturer datasheet. It covers all 100 pins of the LQFP device, including supply, ground, clock, reset, memory, and serial-interface assignments. Use that table during schematic review and cross-check every net against the selected PCB footprint before fabrication; package outline information alone does not establish functional pin compatibility.
Is the TMS320BC51PZ80 suitable for motor control?
Yes, the TMS320BC51PZ80 can suit motor-control applications that benefit from deterministic fixed-point execution and dedicated serial interfaces. Its 80 MHz rating supports time-critical control computations, while BSP and SSP can connect with converters or positioning interfaces. The control loop still requires external power stages, sensing networks, protection circuitry, and timing validation against the mechanical system.
Can TMS320BC51PZ80 be used for audio signal processing?
Yes, the TMS320BC51PZ80 is suitable for embedded audio and voice-processing functions that fit its 16-bit fixed-point architecture and 4 kB RAM. The SSP or BSP serial interface can connect to an audio codec or converter, and the DSP can execute filtering and signal transformation in real time. System-level audio quality also depends on converter performance, clocking, memory requirements, and the implemented algorithm.
TMS320BC51PZ80 vs TMS320BC51PZL80 - which should I choose?
TMS320BC51PZL80 is the closest identified family alternative because it retains the TMS320BC51PZ package designation and 80 MHz product code. The available family information does not fully expose every ordering difference, so engineers should confirm pin assignments, temperature grade, clock rating, and memory configuration against the manufacturer datasheet before treating it as a drop-in production replacement.
When should I choose TMS320BC51PZ80 over another fixed-point DSP?
Choose TMS320BC51PZ80 when a design specifically targets the 80 MHz TMS320BC51 configuration, 100-LQFP footprint, 16 kB ROM, 4 kB RAM, and BSP/SSP/TDM peripheral set. A different fixed-point processor should be selected when it offers a required floating-point engine, greater memory, a smaller package, or a modern peripheral set that materially reduces development effort.
Is TMS320BC51PZ80 suitable for communications equipment?
Yes, the TMS320BC51PZ80 is suitable for communications equipment requiring real-time fixed-point processing and synchronous serial connectivity. Its BSP and SSP interfaces can support codecs, transceivers, or network-facing converters, while the TDM interface supports multiplexed traffic. Designers must verify timing margins, channel format, line-rate requirements, and signal levels for the selected external devices.
What is the best drop-in replacement for TMS320BC51PZ80?
TMS320BC51PZL80 is the leading identified drop-in candidate because it shares the TMS320BC51PZ family and 80 MHz designation. No alternative should be approved solely from a family name: verify the 100-pin footprint, pin-by-pin signal assignments, electrical limits, memory organization, software model, and production-temperature grade. The Request a Quote form can be used to check current sourcing conditions.
Can another manufacturer provide a pin-compatible TMS320BC51PZ80 equivalent?
No verified cross-manufacturer drop-in equivalent was identified for the TMS320BC51PZ80. A replacement with a 100-pin package is not automatically compatible because a DSP pinout can differ in clocking, memory, ground, and serial-interface assignments. A non-Texas Instruments candidate should therefore be treated as a redesign unless its manufacturer explicitly documents pin-to-pin compatibility.
Where can I buy TMS320BC51PZ80 online?
Use the Request a Quote form on this page to request TMS320BC51PZ80 availability, unit pricing, quantity breaks, and current lead time. The quote form keeps commercial information aligned with current inventory and avoids publishing a stale transaction price. Include your required quantity, package format, date code preference, and target delivery location in the request.
What is the lead time for TMS320BC51PZ80?
The current lead time for TMS320BC51PZ80 should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, factory inventory, date-code requirements, and regional demand. A complete request should identify the quantity, reel or tray preference, acceptable date code, shipping destination, and required arrival date.
Is TMS320BC51PZ80 in stock?
Current TMS320BC51PZ80 inventory should be checked through the Request a Quote form on this page. The form provides an efficient route for obtaining quantity-dependent availability and scheduling information without embedding a potentially outdated stock count. For production planning, also specify whether partial quantities are acceptable and whether a specific date-code range is mandatory.
Does TMS320BC51PZ80 comply with RoHS?
The TMS320BC51PZ80 product information identifies the device as RoHS3 compatible. RoHS compliance restricts specified hazardous substances in electronic products, while lead-free assembly practices remain a separate production consideration. Confirm the exact ordering suffix, terminal finish, packing format, and applicable declaration with the manufacturer documentation used for production release.

Data referensi kejuruteraan untuk TMS320BC51PZ80 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the TMS320BC51PZ80 when the design is specifically committed to the 80 MHz TMS320BC51 configuration and its 100-LQFP footprint. It is particularly suitable when a fixed-point processor can replace a general-purpose controller, the workload fits 16 kB ROM and 4 kB RAM, and BSP, SSP, or TDM connectivity provides a direct path to converters and communications hardware. TMS320BC51PZL80 is the closest identified family candidate, but production substitution should follow a complete pin, timing, memory, temperature-grade, and software-model review. TMS320BC51PZ100 may suit a design that needs additional instruction-rate margin, although it changes the clock target and may require different timing and thermal validation. Do not select a cross-manufacturer part solely because it has 100 pins; use a processor with explicitly documented pin-to-pin equivalence, or budget for a PCB and firmware redesign.

Perbandingan dengan Gantian

Parametr Produk Ini TMS320BC51PZL80 TMS320BC51PZ100
Brand Texas Instruments Texas Instruments Texas Instruments
Package 100-LQFP (14 mm x 14 mm) 100-LQFP (14 mm x 14 mm) 100-LQFP (14 mm x 14 mm)
Processor Type Fixed-point digital signal processor (DSP) Fixed-point digital signal processor (DSP) Fixed-point digital signal processor (DSP)
Clock Frequency 80 MHz 80 MHz 100 MHz
CPU Word Length 16 bit 16 bit 16 bit

Penyeberangsung Jelas

  • Targeted 80 MHz configuration (vsTMS320BC51PZ100)
  • Confirmed integrated memory configuration (vsTMS320BC51PZL80)
  • Three named synchronous interface families (vsTMS320BC51PZL80)

Catatan Desain

Treat the clock, reset, and serial interfaces as sensitive routes on the 100-LQFP footprint. Keep clock traces short, provide a continuous reference plane beneath them, avoid switching-node crossings, and place decoupling capacitors close to the associated supply pins. Because the package has many leads, pin-by-pin net assignment should be completed from the manufacturer datasheet before the component footprint and placement are released.

Use the manufacturer’s recommended supply topology and bypass arrangement for the 5 V operating condition. Separate analog-sensitive returns from digital return currents where the application provides separate pins, and maintain low-impedance connections between ground pins and the relevant plane. Review the power-up sequence, reset behavior, and external regulator tolerance under maximum processor activity so the core supply never enters an unspecified state.

Do not treat a shared package name as proof of complete interchangeability. Before replacing TMS320BC51PZ80, compare every pin name, supply limit, clock input, memory interface signal, and peripheral function, then confirm that the software model, timing, and production-temperature grade remain suitable. A 100-pin package match alone cannot compensate for a changed serial function, ground arrangement, or interrupt topology.

Budget acquisition and processing latency before selecting a communication or audio converter. Clock phase, serial frame boundaries, TDM slot allocation, and synchronization must be verified at the system level. Use controlled-impedance routing where the interface rate requires it, keep the processor clock away from sensitive analog inputs, and validate signal margins using the worst-case operating configuration rather than a nominal test pattern.

Maklumat Kesediaan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The product listing identifies RoHS3 compliance. No additional REACH, halogen-free, conflict-minerals, or automotive qualification declaration was established.

Data disahkan pada: 2026-11-10 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

TMS320BC51PZ80 datasheet TMS320BC51PZ80 pinout TMS320BC51PZ80 datasheet pdf TMS320BC51PZ80 specifications TMS320BC51PZ80 price TMS320BC51PZ80 stock Texas Instruments TMS320BC51PZ80 TMS320BC51PZ80 equivalent TMS320BC51PZ80 replacement TMS320BC51PZ80 vs TMS320BC51PZL80 TMS320BC51PZ80 100-LQFP pinout TMS320BC51PZ80 motor control TMS320BC51PZ80 audio processing TMS320BC51PZ80 80MHz DSP TMS320BC51PZ80 buy online

Komponen dan Tanda berkaitan

Texas Instruments TMS320BC51PZ80 TMS320BC51PZL80 TMS320BC51PZ100 fixed-point digital signal processor DSP digital signal processor embedded processor 16-bit CPU 80 MHz clock 16 kB ROM 4 kB RAM BSP interface SSP interface TDM interface 100-LQFP LQFP package surface-mount package 5 V supply RoHS3 motor control audio processing telemetry industrial automation signal integrity
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ