VSC8584XKS-08 - Quad-Port GbE PHY | Microchip Technology
MPN: VSC8584XKS-08 ✓ সক্রিয়VSC8584XKS-08 সারাংশ
A Gigabit Ethernet PHY is the physical-layer interface between a network controller or switching silicon and external copper cabling. It converts transmitted data into signals suitable for the physical network and receives and reconstructs incoming signals. As part of the Ethernet hierarchy, the PHY operates below the network controller and above the physical medium. The VSC8584 family therefore belongs to the broader categories of Ethernet interface IC, communications semiconductor, interface IC, and networking semiconductor.
The VSC8584 integrates four GbE channels rather than implementing only one physical port. This architecture can simplify board partitioning by reducing the number of separate Ethernet PHY packages required in multiport gateways, servers, and industrial communication equipment. Intellisec adds a security-oriented capability for protecting network communications, while VeriTime provides timing-related functionality for systems where deterministic network behavior and synchronization matter. The exact protocol, clocking, and operating limits should be confirmed against the manufacturer documentation for the selected ordering code.
Multiple ordering suffixes identify different VSC8584 configurations or silicon revisions. Results for VSC8584XKS-10, VSC8584XKS-11, VSC8584XKS-13, and VSC8584XKS-14 show that the series is offered in a 256-PBGA package, but suffix-dependent features and timing behavior must be checked before interchange. Microchip application note VPPD-04110 explains that VSC8584XKS-11 and VSC8584XKS-14 devices use high-resolution timing circuitry in the IEEE 1588 engine, with ±4 ns accuracy when recommended software API 4.66 or later is used.
Typical uses include enterprise access equipment, cloud-network gateways, industrial Ethernet switching, smart-grid communications, video-network aggregation, and multiport embedded systems. The four integrated channels can reduce connector and routing complexity when the design requires four copper ports. PHY integration should not be confused with a complete Ethernet switch: system-level behavior also depends on the selected network controller or switch ASIC, magnetics, connector layout, firmware, and signal-integrity implementation.
The main PCB consideration is the demanding 256-pin PBGA land pattern. Follow the manufacturer land pattern, ball assignment, and reference layout exactly; confirm escape-routing and via-in-pad rules with the package documentation. Keep the high-speed copper routes short, provide continuous reference planes, control impedance, and account for magnetics and connector placement in the channel-budget study.
This page combines manufacturer application positioning, family-level ordering information, package context, and a structured comparison of documented VSC8584 variants. It also identifies which functions, electrical ratings, pin assignments, and lifecycle terms require confirmation from the exact VSC8584XKS-08 manufacturer documentation before a production release.
এর জন্য ড্রপ-ইন বিকল্প VSC8584XKS-08 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
VSC8584XKS-10
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
VSC8584XKS-11
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
VSC8584XKS-13
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
VSC8584XKS-14
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
VSC8584XKS-08 বিশেষণ
| Product Type | Quad-port Gigabit Ethernet PHY transceiver |
| Number of Ethernet Ports | 4 ports |
| Ethernet Speed | 1 Gb/s per port |
| Physical Layer | Gigabit Ethernet PHY |
| Security Feature | Intellisec |
| Timing Feature | VeriTime |
| প্যাকেজ | 256-PBGA (17 mm x 17 mm) |
| পিন সংখ্যা | 256 pins |
| মাউন্টিং টাইপ | Surface mount |
VSC8584XKS-08 256-pbga (17 mm x 17 mm) পিন কনফিগারেশন গাইড
VSC8584XKS-08 (256-pbga (17 mm x 17 mm) প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি VSC8584XKS-08.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
VSC8584XKS-08 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Enterprise Multiport Network Gateway, Industrial Ethernet Switch Equipment, Smart-Grid Communications, Cloud Network Equipment, Video Network Aggregation, Database and Enterprise Server Connectivity.
Enterprise Multiport Network Gateway
The VSC8584XKS-08 fits enterprise gateway designs that require four copper Gigabit Ethernet channels in a single PHY package. Four integrated channels can reduce the number of separate PHY components and simplify board partitioning while preserving four external network connections. Intellisec adds a security-oriented function appropriate for enterprise access equipment, where exposed Ethernet interfaces require stronger communications protection. The design must still pair the PHY with suitable switching or network-controller silicon, magnetics, connectors, and firmware. Because the device uses a 256-PBGA package, its differential routing, reference planes, thermal paths, and power delivery require a carefully reviewed implementation before release.
সুপারিশকৃত
Industrial Ethernet Switch Equipment
The VSC8584XKS-08 can support industrial equipment requiring several 1 Gb/s copper ports, such as network controllers, condition-monitoring gateways, and factory communication equipment. Its quad-port architecture consolidates four physical channels into one device, which can simplify enclosure planning and reduce PHY-component count. The designer should verify the exact ordering code's temperature rating, electrical limits, cable reach, and isolation requirements against the applicable industrial environment. Differential-pair geometry and magnetics placement are as important as the PHY selection because the industrial enclosure can introduce grounding and surge-related challenges. Use the manufacturer reference design and layout guidance for a production-qualified implementation.
সুপারিশকৃত
Smart-Grid Communications
The VSC8584XKS-08 is positioned by Microchip for smart-grid communications, where multiple Ethernet endpoints can connect field equipment to a monitoring or control network. Four integrated GbE channels provide a practical way to connect redundant monitoring, aggregation, or substation-adjacent equipment without assigning a separate PHY package to every port. VeriTime can be valuable where network timing or synchronization is part of the system design, subject to confirmation of the behavior of the exact XKS-08 ordering code. Engineers should assess environmental temperature, transient immunity, grounding, and cable protection. The 256-PBGA footprint should be placed according to the official land pattern with unobstructed access to power, ground, and high-speed routing resources.
সুপারিশকৃত
Cloud Network Equipment
The VSC8584XKS-08 is suitable for cloud-network equipment requiring several secure Gigabit Ethernet service ports. The four-channel VSC8584 architecture can simplify dense front-panel or backplane I/O while Intellisec supports the threat-management objectives of Internet-facing communications equipment. Such systems commonly combine PHY silicon with a high-performance switch or controller, so software configuration, link timing, cable reach, and recovery behavior must be validated as a complete network path. High-speed lanes should use the manufacturer's differential-pair geometry and a continuous ground reference. Thermal analysis should include the complete 256-PBGA assembly under expected traffic load, and magnetics should be positioned according to the reference design to minimize coupling and insertion-loss penalties.
সুপারিশকৃত
Video Network Aggregation
The VSC8584XKS-08 can be used in video aggregation equipment that accepts several Gigabit Ethernet camera or access links. Four PHY channels in one package make the part relevant to compact network appliances where connector density and PCB area are constrained. The actual video traffic rate does not prevent PHY use because Gigabit Ethernet negotiation and packet handling remain functions of the complete network path, but designers should confirm full-duplex performance and error recovery requirements. Differential copper routing, magnetics, connector launch geometry, and return-path continuity require close attention at 1 Gb/s. The 256-PBGA thermal and escape-routing requirements also favor a partitioned board design with the PHY, memory, processor, and power circuitry placed according to the reference layout.
সুপারিশকৃত
Database and Enterprise Server Connectivity
The VSC8584XKS-08 is relevant to database appliances and enterprise server accessories that need several Gigabit Ethernet host connections. Consolidating four channels into one quad-port PHY can reduce component count and create a consistent physical-layer implementation across repeated ports. Intellisec supports designs where network-facing links must incorporate security controls, while the exact role of VeriTime depends on synchronization requirements and the selected ordering code. A successful server-adjacent design must verify power integrity, thermal performance, link margin, and firmware support for the host controller. Place the 256-PBGA on a multilayer board with continuous references, keep magnetics and connectors away from sensitive clocks and data lanes, and use the official ball map for every power, ground, and control connection.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা VSC8584XKS-08 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | VSC8584XKS-10 | VSC8584XKS-11 | VSC8584XKS-13 | VSC8584XKS-14 |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 256-PBGA (17 mm x 17 mm) | 256-PBGA (17 mm x 17 mm) | 256-PBGA (17 mm x 17 mm) | 256-PBGA (17 mm x 17 mm) | 256-PBGA (17 mm x 17 mm) |
| Product Family | VSC8584 | VSC8584 | VSC8584 | VSC8584 | VSC8584 |
| Ethernet Port Count | 4 ports | 4 ports | 4 ports | 4 ports | 4 ports |
| Nominal Ethernet Speed | 1 Gb/s per port | 1 Gb/s per port | 1 Gb/s per port | 1 Gb/s per port | 1 Gb/s per port |
| Intellisec Capability | Supported | Family feature; exact ordering-code support requires confirmation | Family feature; exact ordering-code support requires confirmation | Family feature; exact ordering-code support requires confirmation | Family feature; exact ordering-code support requires confirmation |
| VeriTime Capability | Supported | Family feature; exact ordering-code support requires confirmation | Supported | Family feature; exact ordering-code support requires confirmation | Supported |
| Primary Application Positioning | Secure cloud networks, enterprise communications, databases, smart grid, and video | VSC8584 quad-port GbE PHY family | VSC8584 quad-port GbE PHY family | VSC8584 quad-port GbE PHY family | VSC8584 quad-port GbE PHY family |
মূল পার্থক্যসমূহ
- Four integrated Gigabit Ethernet channels in one package (বনামKSZ8041TLI-TR)
- Security-oriented Intellisec capability for exposed network links (বনামKSZ8721SLI-TR)
- VeriTime timing capability within the VSC8584 family (বনামKSZ8041RNL-TR)
ডিজাইন নোট
Use the official VSC8584 256-PBGA land pattern and ball map without changing pad geometry, via arrangement, or solder-mask design. Route each copper interface as a controlled-impedance differential pair over a continuous reference plane, minimize stubs and layer transitions, and place magnetics and connectors according to the manufacturer reference layout. Treat the PHY, magnetics, and connector launch as one channel because small placement or return-path errors can affect link margin even when the controller and PHY are selected correctly.
Confirm the exact ordering code's supply rails, current limits, power-up sequence, and power-good behavior in the manufacturer datasheet before designing the 256-PBGA power grid. Use the recommended decoupling values and placement directly beside their associated balls, distribute power across multiple balls where the package drawing allows it, and provide quiet return paths for high-frequency current. Include worst-case Ethernet traffic and startup conditions in the system power budget rather than relying on nominal channel activity.
Plan all four copper channels against the PCB stack-up before routing. Maintain the manufacturer-specified differential impedance, avoid right-angle transitions where practical, and keep clocks, data interfaces, magnetics, and connectors separated according to the reference design. Validate insertion loss, return loss, crosstalk, and common-mode behavior through simulation or measurement because the four integrated channels can create coupling opportunities that are not apparent from the block diagram alone.
Do not treat VSC8584 ordering suffixes as interchangeable without checking the silicon-revision and feature tables. Microchip application note VPPD-04110 documents meaningful IEEE 1588 behavior differences among XKS variants and states that software API 4.66 or later is required for the documented ±4 ns capability of devices using the high-resolution timing circuitry. Record the exact MPN, silicon revision, API version, and firmware configuration in production documentation.
কমপ্লায়েন্স তথ্য
Compliance status must be confirmed from the exact Microchip ordering-code product documentation. The VSC8584 family is associated with RoHS and REACH comparisons, but the listing snippets do not establish the status of VSC8584XKS-08 itself.