Microchip Technology

VSC8584XKS-08 - Quad-Port GbE PHY | Microchip Technology

Teilenummer: VSC8584XKS-08 ✓ Aktiv
256-PBGA (17 mm x 17 mm) Package 1 Gb/s per port Speed
MOQ: 1 |

VSC8584XKS-08 Übersicht

The Microchip Technology VSC8584XKS-08 is a quad-port Gigabit Ethernet physical-layer transceiver, or GbE PHY, with Intellisec and VeriTime capabilities in a 256-pin PBGA package. It integrates four Gigabit Ethernet PHY channels and is positioned for secure cloud-network equipment, enterprise communications, databases, smart-grid systems, video infrastructure, e-commerce platforms, and government communications. Its combination of multichannel integration and network-security features makes it suitable for designs requiring multiple copper Ethernet connections in a compact component.

A Gigabit Ethernet PHY is the physical-layer interface between a network controller or switching silicon and external copper cabling. It converts transmitted data into signals suitable for the physical network and receives and reconstructs incoming signals. As part of the Ethernet hierarchy, the PHY operates below the network controller and above the physical medium. The VSC8584 family therefore belongs to the broader categories of Ethernet interface IC, communications semiconductor, interface IC, and networking semiconductor.

The VSC8584 integrates four GbE channels rather than implementing only one physical port. This architecture can simplify board partitioning by reducing the number of separate Ethernet PHY packages required in multiport gateways, servers, and industrial communication equipment. Intellisec adds a security-oriented capability for protecting network communications, while VeriTime provides timing-related functionality for systems where deterministic network behavior and synchronization matter. The exact protocol, clocking, and operating limits should be confirmed against the manufacturer documentation for the selected ordering code.

Multiple ordering suffixes identify different VSC8584 configurations or silicon revisions. Results for VSC8584XKS-10, VSC8584XKS-11, VSC8584XKS-13, and VSC8584XKS-14 show that the series is offered in a 256-PBGA package, but suffix-dependent features and timing behavior must be checked before interchange. Microchip application note VPPD-04110 explains that VSC8584XKS-11 and VSC8584XKS-14 devices use high-resolution timing circuitry in the IEEE 1588 engine, with ±4 ns accuracy when recommended software API 4.66 or later is used.

Typical uses include enterprise access equipment, cloud-network gateways, industrial Ethernet switching, smart-grid communications, video-network aggregation, and multiport embedded systems. The four integrated channels can reduce connector and routing complexity when the design requires four copper ports. PHY integration should not be confused with a complete Ethernet switch: system-level behavior also depends on the selected network controller or switch ASIC, magnetics, connector layout, firmware, and signal-integrity implementation.

The main PCB consideration is the demanding 256-pin PBGA land pattern. Follow the manufacturer land pattern, ball assignment, and reference layout exactly; confirm escape-routing and via-in-pad rules with the package documentation. Keep the high-speed copper routes short, provide continuous reference planes, control impedance, and account for magnetics and connector placement in the channel-budget study.

This page combines manufacturer application positioning, family-level ordering information, package context, and a structured comparison of documented VSC8584 variants. It also identifies which functions, electrical ratings, pin assignments, and lifecycle terms require confirmation from the exact VSC8584XKS-08 manufacturer documentation before a production release.

Drop-in-Alternativen für VSC8584XKS-08 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

VSC8584XKS-10

✅ Drop-In
📦 256-PBGA (17 mm x 17 mm)
Same VSC8584 family and 256-PBGA package; ordering-suffix silicon and feature differences require confirmation

📋 Referenzalternative (nicht im Katalog)

VSC8584XKS-11

✅ Drop-In
📦 256-PBGA (17 mm x 17 mm)
Same VSC8584 family and 256-PBGA package; documented high-resolution IEEE 1588 timing circuitry distinguishes this ordering variant

📋 Referenzalternative (nicht im Katalog)

VSC8584XKS-13

✅ Drop-In
📦 256-PBGA (17 mm x 17 mm)
Same VSC8584 family and 256-PBGA package; ordering-suffix silicon and feature differences require confirmation

📋 Referenzalternative (nicht im Katalog)

VSC8584XKS-14

✅ Drop-In
📦 256-PBGA (17 mm x 17 mm)
Same VSC8584 family and 256-PBGA package; documented high-resolution IEEE 1588 timing circuitry distinguishes this ordering variant

📋 Referenzalternative (nicht im Katalog)

VSC8584XKS-08 Technische Daten

Product Type Quad-port Gigabit Ethernet PHY transceiver
Number of Ethernet Ports 4 ports
Ethernet Speed 1 Gb/s per port
Physical Layer Gigabit Ethernet PHY
Security Feature Intellisec
Timing Feature VeriTime
Gehäuse 256-PBGA (17 mm x 17 mm)
Pin-Anzahl 256 pins
Montageart Surface mount

VSC8584XKS-08 256-pbga (17 mm x 17 mm) Pinbelegungsleitfaden

Pinbelegung für VSC8584XKS-08 (256-pbga (17 mm x 17 mm)-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für VSC8584XKS-08 im 256-pbga (17 mm x 17 mm)-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für VSC8584XKS-08.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

VSC8584XKS-08 ist geeignet für 6 Anwendungs: Enterprise Multiport Network Gateway, Industrial Ethernet Switch Equipment, Smart-Grid Communications, Cloud Network Equipment, Video Network Aggregation, Database and Enterprise Server Connectivity.

🌐

Enterprise Multiport Network Gateway

The VSC8584XKS-08 fits enterprise gateway designs that require four copper Gigabit Ethernet channels in a single PHY package. Four integrated channels can reduce the number of separate PHY components and simplify board partitioning while preserving four external network connections. Intellisec adds a security-oriented function appropriate for enterprise access equipment, where exposed Ethernet interfaces require stronger communications protection. The design must still pair the PHY with suitable switching or network-controller silicon, magnetics, connectors, and firmware. Because the device uses a 256-PBGA package, its differential routing, reference planes, thermal paths, and power delivery require a carefully reviewed implementation before release.

🏭

Industrial Ethernet Switch Equipment

The VSC8584XKS-08 can support industrial equipment requiring several 1 Gb/s copper ports, such as network controllers, condition-monitoring gateways, and factory communication equipment. Its quad-port architecture consolidates four physical channels into one device, which can simplify enclosure planning and reduce PHY-component count. The designer should verify the exact ordering code's temperature rating, electrical limits, cable reach, and isolation requirements against the applicable industrial environment. Differential-pair geometry and magnetics placement are as important as the PHY selection because the industrial enclosure can introduce grounding and surge-related challenges. Use the manufacturer reference design and layout guidance for a production-qualified implementation.

🏭

Smart-Grid Communications

The VSC8584XKS-08 is positioned by Microchip for smart-grid communications, where multiple Ethernet endpoints can connect field equipment to a monitoring or control network. Four integrated GbE channels provide a practical way to connect redundant monitoring, aggregation, or substation-adjacent equipment without assigning a separate PHY package to every port. VeriTime can be valuable where network timing or synchronization is part of the system design, subject to confirmation of the behavior of the exact XKS-08 ordering code. Engineers should assess environmental temperature, transient immunity, grounding, and cable protection. The 256-PBGA footprint should be placed according to the official land pattern with unobstructed access to power, ground, and high-speed routing resources.

🖥️

Cloud Network Equipment

The VSC8584XKS-08 is suitable for cloud-network equipment requiring several secure Gigabit Ethernet service ports. The four-channel VSC8584 architecture can simplify dense front-panel or backplane I/O while Intellisec supports the threat-management objectives of Internet-facing communications equipment. Such systems commonly combine PHY silicon with a high-performance switch or controller, so software configuration, link timing, cable reach, and recovery behavior must be validated as a complete network path. High-speed lanes should use the manufacturer's differential-pair geometry and a continuous ground reference. Thermal analysis should include the complete 256-PBGA assembly under expected traffic load, and magnetics should be positioned according to the reference design to minimize coupling and insertion-loss penalties.

🎥

Video Network Aggregation

The VSC8584XKS-08 can be used in video aggregation equipment that accepts several Gigabit Ethernet camera or access links. Four PHY channels in one package make the part relevant to compact network appliances where connector density and PCB area are constrained. The actual video traffic rate does not prevent PHY use because Gigabit Ethernet negotiation and packet handling remain functions of the complete network path, but designers should confirm full-duplex performance and error recovery requirements. Differential copper routing, magnetics, connector launch geometry, and return-path continuity require close attention at 1 Gb/s. The 256-PBGA thermal and escape-routing requirements also favor a partitioned board design with the PHY, memory, processor, and power circuitry placed according to the reference layout.

🖥️

Database and Enterprise Server Connectivity

The VSC8584XKS-08 is relevant to database appliances and enterprise server accessories that need several Gigabit Ethernet host connections. Consolidating four channels into one quad-port PHY can reduce component count and create a consistent physical-layer implementation across repeated ports. Intellisec supports designs where network-facing links must incorporate security controls, while the exact role of VeriTime depends on synchronization requirements and the selected ordering code. A successful server-adjacent design must verify power integrity, thermal performance, link margin, and firmware support for the host controller. Place the 256-PBGA on a multilayer board with continuous references, keep magnetics and connectors away from sensitive clocks and data lanes, and use the official ball map for every power, ground, and control connection.

What is the VSC8584XKS-08?
The VSC8584XKS-08 is a Microchip Technology quad-port Gigabit Ethernet PHY with Intellisec and VeriTime capabilities in a 256-PBGA package. According to the Microchip VSC8584 product page, it is intended for secure cloud-network applications such as enterprise communications, databases, smart-grid equipment, e-commerce infrastructure, and video systems. Its four integrated GbE channels allow a multiport equipment design to use one highly integrated PHY package instead of four separate single-port PHY devices.
How many Gigabit Ethernet ports does VSC8584XKS-08 support?
The VSC8584XKS-08 supports four Gigabit Ethernet ports. The Microchip VSC8584 product page describes the device as a quad-port GbE PHY. This integration is useful in gateways, access equipment, industrial Ethernet systems, and other products that need several copper-network interfaces close together. The PHY handles physical-layer signaling, while the complete Ethernet function still requires appropriate switching or network-controller silicon, magnetics, firmware, and a correctly designed PCB.
Where can I download the VSC8584XKS-08 datasheet PDF?
The official VSC8584 documentation is available through the Microchip Technology product page at https://www.microchip.com/en-us/product/VSC8584. Open the product page and select the datasheet or documentation resources for the exact VSC8584XKS-08 ordering code. Because the XKS suffix can correspond to a specific silicon revision and configuration, engineers should review the revision-selection information rather than relying only on a generic family datasheet.
Where can I find the VSC8584XKS-08 pinout?
The pinout and ball assignment for VSC8584XKS-08 must be taken from the ordering-code-specific Microchip datasheet and package drawing available through the official VSC8584 product page. The device is listed in a 256-PBGA package, making the package drawing, ball-map table, and recommended land pattern essential for PCB design. Use those documents when assigning power, ground, clocks, data interfaces, copper PHY channels, and exposed-ball functions.
What is the difference between VSC8584XKS-08 and VSC8584XKS-10?
Both are ordering variants within the Microchip VSC8584 quad-port GbE PHY family, and both are associated with the 256-PBGA product line. The available comparison results do not state the complete suffix-specific electrical or timing differences, so replacement should not be based on the suffix alone. Review the Microchip revision and ordering documentation for the exact feature, silicon-revision, and software requirements before treating either device as a substitute.
VSC8584XKS-08 vs VSC8584XKS-11 - which is better for timing-sensitive Ethernet?
VSC8584XKS-11 is the better candidate for designs requiring the documented high-resolution timing behavior. Microchip application note VPPD-04110 states that VSC8584XKS-11 uses high-resolution timing circuitry in the IEEE 1588 engine, supporting ±4 ns accuracy when software API 4.66 or later is used. VSC8584XKS-08 should be selected only after its own revision documentation confirms equivalent timing behavior and system requirements.
What can replace VSC8584XKS-08?
The closest documented candidates are other Microchip VSC8584XKS ordering variants in the same 256-PBGA family, but no drop-in replacement should be selected solely from an ordering suffix. Review VSC8584XKS-10, VSC8584XKS-11, VSC8584XKS-13, and VSC8584XKS-14 for silicon revision, IEEE 1588 timing, firmware, feature, and lifecycle compatibility. Use the Request a Quote form on this page when confirming availability of the exact MPN.
Is VSC8584XKS-08 suitable for industrial Ethernet equipment?
The VSC8584XKS-08 is suitable in principle for multiport Ethernet equipment because it provides four GbE channels and security-oriented Intellisec capabilities. Industrial suitability also depends on its specified temperature range, electrical ratings, isolation strategy, long-reach support, and qualification status, which must be checked in the exact manufacturer documentation. Its 256-PBGA package also demands careful thermal, power, and PCB-layout engineering.
What are the key specifications engineers should know about VSC8584XKS-08?
The principal documented characteristics of VSC8584XKS-08 are four 1 Gb/s copper Ethernet channels, a 256-PBGA package, Intellisec security capabilities, and VeriTime timing functionality. Microchip positions the VSC8584 for cloud-network, enterprise, database, smart-grid, video, and government communications. Detailed voltage, temperature, power, ball-map, cable-length, and protocol limits should be selected from the manufacturer resources for the exact ordering code.
How does Intellisec improve VSC8584 network security?
Intellisec is the security-oriented feature identified by Microchip for the VSC8584 GbE PHY family. It is intended to strengthen communications protection in cloud-network and enterprise systems, reducing the attack surface associated with exposed network interfaces. The exact mechanisms, threat coverage, configuration procedure, and performance impact must be confirmed in the VSC8584 documentation and associated security guidance rather than inferred from the feature name alone.
What does VeriTime provide in the VSC8584XKS-08?
VeriTime is the timing capability highlighted for the Microchip VSC8584 family, supporting applications where precise synchronization matters. The family documentation and revision notes describe enhanced IEEE 1588 timing behavior in selected XKS-11 and XKS-14 variants. For VSC8584XKS-08, engineers should confirm the implemented timing resolution, supported clock sources, software API requirements, and synchronization accuracy for the exact silicon revision.
Does VSC8584XKS-08 need external Ethernet magnetics?
The copper Gigabit Ethernet implementation requires a board-level network interface design that includes the appropriate magnetic coupling and protection components specified by Microchip. Exact transformer and common-mode-choke requirements depend on cable reach, topology, environmental conditions, and the final interface design. Use the manufacturer reference circuit and layout guidance to select those parts and determine whether voice-board or other integrated magnetics are preferable.
How should a 256-PBGA VSC8584XKS-08 PCB be laid out?
The VSC8584XKS-08 PCB should follow Microchip's package drawing and recommended land pattern exactly because its 256-PBGA footprint contains a dense ball assignment. Route high-speed copper-channel pairs as controlled-impedance differential pairs over a continuous reference plane, minimize stubs and vias, and account for the physical location of magnetics and connectors. Thermal design should also consider the package's power dissipation and the assembled board environment.
Is VSC8584XKS-08 in stock and what is its lead time?
Current stock, minimum order quantity, and production lead time are not established by the product listings shown for VSC8584XKS-08. Request a Quote on this page with the required quantity, date-code constraints, target price, and delivery location so the exact ordering code can be checked. Do not infer availability from a family-level distributor page because individual VSC8584XKS suffixes may have different schedules.
Where can I buy VSC8584XKS-08 and what is the price?
Use the Request a Quote form on this page to inquire about VSC8584XKS-08 pricing, quantity, date code, and delivery schedule. The available product results confirm the MPN and connect it to the Microchip VSC8584 family, but they do not provide a qualifying exact-MPN quantity-price table. A current quotation should therefore be treated as the authoritative commercial response for this ordering code.

Technische Referenzdaten für VSC8584XKS-08 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose VSC8584XKS-08 when the design needs four integrated Gigabit Ethernet copper ports and values Microchip's Intellisec and VeriTime capabilities. Its 256-PBGA package is appropriate for dense multilayer equipment where a single multiport PHY simplifies component count, but it demands disciplined package escape routing, magnetics integration, and thermal validation. Review VSC8584XKS-10 when it meets the required silicon revision and timing configuration. Consider VSC8584XKS-11 or VSC8584XKS-14 for designs requiring the documented high-resolution IEEE 1588 circuitry and software API 4.66 or later. VSC8584XKS-13 may also fit after its suffix-specific features are confirmed. For only one or two ports, a smaller single-port PHY can reduce package and routing complexity. Verify exact ordering-code differences, firmware support, lifecycle status, and production availability before freezing the BOM.

Vergleich mit Alternativen

Parameter Dieses Produkt VSC8584XKS-10 VSC8584XKS-11 VSC8584XKS-13 VSC8584XKS-14
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 256-PBGA (17 mm x 17 mm) 256-PBGA (17 mm x 17 mm) 256-PBGA (17 mm x 17 mm) 256-PBGA (17 mm x 17 mm) 256-PBGA (17 mm x 17 mm)
Product Family VSC8584 VSC8584 VSC8584 VSC8584 VSC8584
Ethernet Port Count 4 ports 4 ports 4 ports 4 ports 4 ports
Nominal Ethernet Speed 1 Gb/s per port 1 Gb/s per port 1 Gb/s per port 1 Gb/s per port 1 Gb/s per port
Intellisec Capability Supported Family feature; exact ordering-code support requires confirmation Family feature; exact ordering-code support requires confirmation Family feature; exact ordering-code support requires confirmation Family feature; exact ordering-code support requires confirmation
VeriTime Capability Supported Family feature; exact ordering-code support requires confirmation Supported Family feature; exact ordering-code support requires confirmation Supported
Primary Application Positioning Secure cloud networks, enterprise communications, databases, smart grid, and video VSC8584 quad-port GbE PHY family VSC8584 quad-port GbE PHY family VSC8584 quad-port GbE PHY family VSC8584 quad-port GbE PHY family

Wichtigste Unterscheidungsmerkmale

  • Four integrated Gigabit Ethernet channels in one package (vs. KSZ8041TLI-TR)
  • Security-oriented Intellisec capability for exposed network links (vs. KSZ8721SLI-TR)
  • VeriTime timing capability within the VSC8584 family (vs. KSZ8041RNL-TR)

Designhinweise

Use the official VSC8584 256-PBGA land pattern and ball map without changing pad geometry, via arrangement, or solder-mask design. Route each copper interface as a controlled-impedance differential pair over a continuous reference plane, minimize stubs and layer transitions, and place magnetics and connectors according to the manufacturer reference layout. Treat the PHY, magnetics, and connector launch as one channel because small placement or return-path errors can affect link margin even when the controller and PHY are selected correctly.

Confirm the exact ordering code's supply rails, current limits, power-up sequence, and power-good behavior in the manufacturer datasheet before designing the 256-PBGA power grid. Use the recommended decoupling values and placement directly beside their associated balls, distribute power across multiple balls where the package drawing allows it, and provide quiet return paths for high-frequency current. Include worst-case Ethernet traffic and startup conditions in the system power budget rather than relying on nominal channel activity.

Plan all four copper channels against the PCB stack-up before routing. Maintain the manufacturer-specified differential impedance, avoid right-angle transitions where practical, and keep clocks, data interfaces, magnetics, and connectors separated according to the reference design. Validate insertion loss, return loss, crosstalk, and common-mode behavior through simulation or measurement because the four integrated channels can create coupling opportunities that are not apparent from the block diagram alone.

Do not treat VSC8584 ordering suffixes as interchangeable without checking the silicon-revision and feature tables. Microchip application note VPPD-04110 documents meaningful IEEE 1588 behavior differences among XKS variants and states that software API 4.66 or later is required for the documented ±4 ns capability of devices using the high-resolution timing circuitry. Record the exact MPN, silicon revision, API version, and firmware configuration in production documentation.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Compliance status must be confirmed from the exact Microchip ordering-code product documentation. The VSC8584 family is associated with RoHS and REACH comparisons, but the listing snippets do not establish the status of VSC8584XKS-08 itself.

Daten verifiziert am: 2026-11-17 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

VSC8584XKS-08 datasheet VSC8584XKS-08 pinout VSC8584XKS-08 datasheet pdf VSC8584XKS-08 equivalent VSC8584XKS-08 replacement VSC8584XKS-08 price VSC8584XKS-08 stock VSC8584XKS-08 256-PBGA VSC8584XKS-08 vs VSC8584XKS-11 Microchip VSC8584XKS-08 VSC8584XKS-08 Ethernet PHY VSC8584XKS-08 smart grid VSC8584XKS-08 IEEE 1588 VSC8584 quad port GbE PHY

Verwandte Bauteile & Begriffe

Microchip Technology VSC8584 VSC8584XKS-08 VSC8584XKS-10 VSC8584XKS-11 VSC8584XKS-13 VSC8584XKS-14 Gigabit Ethernet PHY Ethernet physical layer quad-port Ethernet interface Intellisec VeriTime IEEE 1588 256-PBGA PBGA package family surface-mount semiconductor networking semiconductor interface IC enterprise communications smart-grid communications cloud network security differential-pair routing copper Ethernet RoHS REACH
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen