XC7A25T-L2CPG238E - 23,360 Logic Cell Artix-7 FPGA | AMD
MPN: XC7A25T-L2CPG238E ✓ সক্রিয়XC7A25T-L2CPG238E সারাংশ
An FPGA is a programmable semiconductor containing configurable logic, memory, and digital signal processing resources. It sits above fixed-function devices in the design hierarchy because its internal architecture can be rewritten to implement counters, interfaces, control logic, signal pipelines, or protocol bridges. Artix-7 devices position this programmable-logic capability at lower power and cost than larger FPGA families while retaining dedicated DSP, block RAM, and high-speed serial resources.
Key resources include 23,360 logic cells for general digital implementation, 80 DSP slices for filtering and arithmetic-heavy pipelines, 1,620 Kb of block RAM for buffering and data storage, and 150 user I/O for external interfaces. The device includes four transceivers, expanding the design options for high-speed serial links beyond parallel I/O. Its 238-CSBGA package supports dense board layouts but requires careful escape-routing, thermal, and assembly planning because ball-pitch and pad geometry constrain PCB layout.
The Artix-7 architecture combines programmable logic with dedicated arithmetic and memory resources, allowing designers to partition workloads among LUT-based logic, DSP pipelines, and block RAM instead of relying entirely on external processors. This mixed-resource approach can reduce external component count and shorten data paths when an algorithm is partitioned carefully. Configuration and programming details, permitted clocking resources, and timing constraints should be evaluated with the AMD Vivado design suite for the exact device, package, and speed grade.
Typical applications include industrial control and data acquisition, industrial Ethernet and serial bridging, test and measurement systems, embedded vision front ends, audio and control processing, and compact communications equipment. The 150 I/O count supports parallel sensors, displays, converters, and digital peripherals, while the four transceivers suit point-to-point links when the selected board-level design supports their signaling requirements.
For a new PCB, allow all CPG238 balls to escape according to the AMD package pinout files, and confirm the selected board stack-up and via-in-pad or microvia strategy before layout. Review the power rails, decoupling, configuration interface, clocking, and thermal requirements against the Artix-7 data sheet before committing the layout.
This page combines the device resource profile, package information, speed-grade alternatives, and application guidance to support component selection, footprint review, and PCB planning before a design is released to production.
এর জন্য ড্রপ-ইন বিকল্প XC7A25T-L2CPG238E — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible XC7A25T-L2CPG238E (একই form factor এবং footprint) — পার্থক্য রয়েছে Logic Cells, Mounting Type, Package, Speed Grade, Temperature Grade.
XC7A25T-1CPG238C
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC7A25T-2CPG238C
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC7A25T-1CPG238E
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC7A25T-3CPG238E
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC7A25T-3CPG238C
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC7A25T-L2CPG238E সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | Artix-7 Field-Programmable Gate Array (FPGA) |
| Logic Cells | 23,360 cells |
| User I/O | 150 I/O |
| DSP Slices | 80 slices |
| Block RAM | 1,620 Kb |
| Transceivers | 4 transceivers |
| Speed Grade | -2 |
| প্যাকেজ | 238-CSBGA (CPG238) |
| Package Dimensions | 10 mm x 10 mm |
| মাউন্টিং টাইপ | Surface Mount |
| Temperature Grade | Extended industrial grade (E suffix) |
XC7A25T-L2CPG238E 10 mm x 10 mm পিন কনফিগারেশন গাইড
XC7A25T-L2CPG238E (10 mm x 10 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি XC7A25T-L2CPG238E.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
XC7A25T-L2CPG238E এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control and Automation, Industrial Ethernet and Protocol Bridging, Data Acquisition and Test Equipment, Embedded Vision Preprocessing, Communication Equipment and Protocol Conversion, Audio and Digital Signal Processing.
Industrial Control and Automation
The XC7A25T-L2CPG238E fits centralized machine controllers that combine parallel I/O, sequencing, and digital signal processing. Its 150 user I/O can connect encoders, limit switches, solenoid drivers, and operator interfaces, while 80 DSP slices can accelerate filtering or condition-monitoring algorithms. The -2 speed grade provides additional timing margin for multi-clock control paths, and the E suffix targets extended industrial-temperature designs. Place the FPGA beside the I/O circuitry and use the AMD package pinout files to route the 238-CSBGA footprint.
সুপারিশকৃত
Industrial Ethernet and Protocol Bridging
The Artix-7 XC7A25T-L2CPG238E can implement protocol conversion, packet inspection, and embedded Ethernet control when its four transceivers and 150 I/O are assigned to suitable board-level links. Programmable logic can maintain interface timing while dedicated DSP slices handle filtering or framing operations. The 238-CSBGA package keeps the design compact, but differential routing, reference-clock distribution, and connector placement require careful PCB planning. Validate transceiver pin assignments and timing against the Artix-7 package files before schematic release.
সুপারিশকৃত
Data Acquisition and Test Equipment
The XC7A25T-L2CPG238E is well suited to parallel data-acquisition front ends where multiple input channels must be sampled, buffered, and processed in real time. Its 150 I/O supports digital sensor buses and trigger lines, 1,620 Kb of block RAM accommodates capture buffers, and 80 DSP slices support filters or numerical transforms. The -2 speed grade is useful for pipelining parallel data into higher-rate processing paths. Keep high-speed inputs short, use controlled-impedance routing, and confirm acquisition timing through post-route analysis.
সুপারিশকৃত
Embedded Vision Preprocessing
The XC7A25T-L2CPG238E can perform image pre-processing such as pixel correction, thresholding, and region extraction before sending results to a processor. Dedicated DSP slices accelerate multiply-accumulate operations, block RAM stores line or tile data, and 150 I/O provides parallel connectivity to image sensors and memory interfaces. The compact 238-CSBGA package helps reduce board area, although high-volume pixel routing and power delivery require a carefully planned multilayer PCB. Confirm sensor and memory timing with Vivado constraints.
সুপারিশকৃত
Communication Equipment and Protocol Conversion
The XC7A25T-L2CPG238E supports compact communication modules that translate between parallel, legacy serial, and framed interfaces. Its 23,360 logic cells can implement protocol state machines, while four transceivers support high-speed serial links and 150 I/O handle slower parallel channels. Block RAM can buffer frames or packets without an external memory device when the required depth is sufficient. The -2 speed grade supports predictable pipeline timing, but clock jitter and I/O timing still need margin for system-level synchronization.
সুপারিশকৃত
Audio and Digital Signal Processing
The XC7A25T-L2CPG238E can implement audio decimation, filtering, mixing, and interface control using its 80 DSP slices and 23,360 logic cells. The dedicated arithmetic resources are preferable to emulating every multiplier in general-purpose LUT logic because they improve throughput and reduce routing pressure. Up to 1,620 Kb of block RAM supports channel buffering, while 150 I/O connects converters, clocks, and control signals. Clock-domain crossings and audio sample rates should be constrained explicitly, and the CPG238 layout should maintain short, quiet routing for sensitive signals.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা XC7A25T-L2CPG238E — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | XC7A25T-1CPG238C | XC7A25T-2CPG238C | XC7A25T-1CPG238E | XC7A25T-3CPG238E | XC7A25T-3CPG238C |
|---|---|---|---|---|---|---|
| Package | 238-CSBGA (CPG238), 10 mm x 10 mm | 238-CSBGA (CPG238), 10 mm x 10 mm | 238-CSBGA (CPG238), 10 mm x 10 mm | 238-CSBGA (CPG238), 10 mm x 10 mm | 238-CSBGA (CPG238), 10 mm x 10 mm | 238-CSBGA (CPG238), 10 mm x 10 mm |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 23,360 cells | 23,360 cells | 23,360 cells | 23,360 cells | 23,360 cells | 23,360 cells |
| User I/O | 150 I/O | 150 I/O | 150 I/O | 150 I/O | 150 I/O | 150 I/O |
| DSP Slices | 80 slices | 80 slices | 80 slices | 80 slices | 80 slices | 80 slices |
| Block RAM | 1,620 Kb | 1,620 Kb | 1,620 Kb | 1,620 Kb | 1,620 Kb | 1,620 Kb |
| Speed Grade | -2 | -1 | -2 | -1 | -3 | -3 |
| Temperature Grade Suffix | E | C | C | E | E | C |
| Transceivers | 4 transceivers | 4 transceivers | 4 transceivers | 4 transceivers | 4 transceivers | 4 transceivers |
মূল পার্থক্যসমূহ
- Maintains the -2 performance grade with an extended industrial temperature suffix (বনামXC7A25T-2CPG238C)
- Provides one speed grade more margin than the -1 CPG238 option (বনামXC7A25T-1CPG238C)
- Combines 150 parallel I/O with four dedicated transceivers (বনামXC7A25T-3CPG238C)
ডিজাইন নোট
Use the AMD Artix-7 package device pinout files for the CPG238 ball assignments before routing the PCB. The 238-CSBGA package on a 10 mm by 10 mm footprint leaves limited escape-routing space, so fanout, layer transitions, and via placement should be planned from the start. Confirm the board stack-up, line width, spacing, and via-in-pad or microvia capability against the assembly process and the manufacturer footprint.
Partition the supply network according to the voltage requirements in the AMD Artix-7 data sheet and place the specified decoupling capacitors directly beside the associated power and ground balls. Separate high-current and sensitive routing where practical, and keep the configuration interface away from switching or high-speed transceiver regions. Verify the complete power tree against worst-case utilization before layout signoff.
Constrain all incoming and outgoing interface timing in Vivado, especially for the 150 user I/O and four transceivers. Use the package pinout files to identify dedicated clocking and transceiver balls, preserve clock cleanliness, and avoid long stubs or unnecessary layer changes on sensitive nets. After routing, inspect timing, skew, and any voltage or timing exceptions rather than relying only on resource-utilization summaries.
Because the 238-CSBGA package concentrates the device and its power delivery in a compact area, provide thermal copper beneath and around the component while maintaining the electrical-clearance and assembly requirements of the package. Estimate junction temperature from the actual board copper, airflow, and configured power rather than assuming that a small package area indicates low dissipation. Validate the thermal solution over the highest expected operating mode.
কমপ্লায়েন্স তথ্য
Compliance declarations for RoHS, REACH, AEC-Q100, lead-free status, halogen-free status, and conflict minerals require confirmation from the current manufacturer product documentation or a compliance certificate for the exact orderable MPN.