XC7A25T-L2CPG238E - 23,360 Logic Cell Artix-7 FPGA | AMD
부품 번호: XC7A25T-L2CPG238E ✓ 활성XC7A25T-L2CPG238E 개요
An FPGA is a programmable semiconductor containing configurable logic, memory, and digital signal processing resources. It sits above fixed-function devices in the design hierarchy because its internal architecture can be rewritten to implement counters, interfaces, control logic, signal pipelines, or protocol bridges. Artix-7 devices position this programmable-logic capability at lower power and cost than larger FPGA families while retaining dedicated DSP, block RAM, and high-speed serial resources.
Key resources include 23,360 logic cells for general digital implementation, 80 DSP slices for filtering and arithmetic-heavy pipelines, 1,620 Kb of block RAM for buffering and data storage, and 150 user I/O for external interfaces. The device includes four transceivers, expanding the design options for high-speed serial links beyond parallel I/O. Its 238-CSBGA package supports dense board layouts but requires careful escape-routing, thermal, and assembly planning because ball-pitch and pad geometry constrain PCB layout.
The Artix-7 architecture combines programmable logic with dedicated arithmetic and memory resources, allowing designers to partition workloads among LUT-based logic, DSP pipelines, and block RAM instead of relying entirely on external processors. This mixed-resource approach can reduce external component count and shorten data paths when an algorithm is partitioned carefully. Configuration and programming details, permitted clocking resources, and timing constraints should be evaluated with the AMD Vivado design suite for the exact device, package, and speed grade.
Typical applications include industrial control and data acquisition, industrial Ethernet and serial bridging, test and measurement systems, embedded vision front ends, audio and control processing, and compact communications equipment. The 150 I/O count supports parallel sensors, displays, converters, and digital peripherals, while the four transceivers suit point-to-point links when the selected board-level design supports their signaling requirements.
For a new PCB, allow all CPG238 balls to escape according to the AMD package pinout files, and confirm the selected board stack-up and via-in-pad or microvia strategy before layout. Review the power rails, decoupling, configuration interface, clocking, and thermal requirements against the Artix-7 data sheet before committing the layout.
This page combines the device resource profile, package information, speed-grade alternatives, and application guidance to support component selection, footprint review, and PCB planning before a design is released to production.
드롭인 대체품: XC7A25T-L2CPG238E — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC7A25T-L2CPG238E (동일 폼 팩터 및 풋프린트) — 차이점: Logic Cells, Mounting Type, Package, Speed Grade, Temperature Grade.
XC7A25T-1CPG238C
✅ 드롭인가격 문의
데이터시트 보기 →XC7A25T-2CPG238C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC7A25T-1CPG238E
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC7A25T-3CPG238E
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC7A25T-3CPG238C
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC7A25T-L2CPG238E 최대 정격 & 전기적 특성
| Device Type | Artix-7 Field-Programmable Gate Array (FPGA) |
| Logic Cells | 23,360 cells |
| User I/O | 150 I/O |
| DSP Slices | 80 slices |
| Block RAM | 1,620 Kb |
| Transceivers | 4 transceivers |
| Speed Grade | -2 |
| 패키지 | 238-CSBGA (CPG238) |
| Package Dimensions | 10 mm x 10 mm |
| 실장 유형 | Surface Mount |
| Temperature Grade | Extended industrial grade (E suffix) |
XC7A25T-L2CPG238E 10 mm x 10 mm 핀 구성 가이드
XC7A25T-L2CPG238E(10 mm x 10 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC7A25T-L2CPG238E.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC7A25T-L2CPG238E 적합 용도: 6 애플리케이션s: Industrial Control and Automation, Industrial Ethernet and Protocol Bridging, Data Acquisition and Test Equipment, Embedded Vision Preprocessing, Communication Equipment and Protocol Conversion, Audio and Digital Signal Processing.
Industrial Control and Automation
The XC7A25T-L2CPG238E fits centralized machine controllers that combine parallel I/O, sequencing, and digital signal processing. Its 150 user I/O can connect encoders, limit switches, solenoid drivers, and operator interfaces, while 80 DSP slices can accelerate filtering or condition-monitoring algorithms. The -2 speed grade provides additional timing margin for multi-clock control paths, and the E suffix targets extended industrial-temperature designs. Place the FPGA beside the I/O circuitry and use the AMD package pinout files to route the 238-CSBGA footprint.
추천
Industrial Ethernet and Protocol Bridging
The Artix-7 XC7A25T-L2CPG238E can implement protocol conversion, packet inspection, and embedded Ethernet control when its four transceivers and 150 I/O are assigned to suitable board-level links. Programmable logic can maintain interface timing while dedicated DSP slices handle filtering or framing operations. The 238-CSBGA package keeps the design compact, but differential routing, reference-clock distribution, and connector placement require careful PCB planning. Validate transceiver pin assignments and timing against the Artix-7 package files before schematic release.
추천
Data Acquisition and Test Equipment
The XC7A25T-L2CPG238E is well suited to parallel data-acquisition front ends where multiple input channels must be sampled, buffered, and processed in real time. Its 150 I/O supports digital sensor buses and trigger lines, 1,620 Kb of block RAM accommodates capture buffers, and 80 DSP slices support filters or numerical transforms. The -2 speed grade is useful for pipelining parallel data into higher-rate processing paths. Keep high-speed inputs short, use controlled-impedance routing, and confirm acquisition timing through post-route analysis.
추천
Embedded Vision Preprocessing
The XC7A25T-L2CPG238E can perform image pre-processing such as pixel correction, thresholding, and region extraction before sending results to a processor. Dedicated DSP slices accelerate multiply-accumulate operations, block RAM stores line or tile data, and 150 I/O provides parallel connectivity to image sensors and memory interfaces. The compact 238-CSBGA package helps reduce board area, although high-volume pixel routing and power delivery require a carefully planned multilayer PCB. Confirm sensor and memory timing with Vivado constraints.
추천
Communication Equipment and Protocol Conversion
The XC7A25T-L2CPG238E supports compact communication modules that translate between parallel, legacy serial, and framed interfaces. Its 23,360 logic cells can implement protocol state machines, while four transceivers support high-speed serial links and 150 I/O handle slower parallel channels. Block RAM can buffer frames or packets without an external memory device when the required depth is sufficient. The -2 speed grade supports predictable pipeline timing, but clock jitter and I/O timing still need margin for system-level synchronization.
추천
Audio and Digital Signal Processing
The XC7A25T-L2CPG238E can implement audio decimation, filtering, mixing, and interface control using its 80 DSP slices and 23,360 logic cells. The dedicated arithmetic resources are preferable to emulating every multiplier in general-purpose LUT logic because they improve throughput and reduce routing pressure. Up to 1,620 Kb of block RAM supports channel buffering, while 150 I/O connects converters, clocks, and control signals. Clock-domain crossings and audio sample rates should be constrained explicitly, and the CPG238 layout should maintain short, quiet routing for sensitive signals.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC7A25T-L2CPG238E — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC7A25T-1CPG238C | XC7A25T-2CPG238C | XC7A25T-1CPG238E | XC7A25T-3CPG238E | XC7A25T-3CPG238C |
|---|---|---|---|---|---|---|
| Package | 238-CSBGA (CPG238), 10 mm x 10 mm | 238-CSBGA (CPG238), 10 mm x 10 mm | 238-CSBGA (CPG238), 10 mm x 10 mm | 238-CSBGA (CPG238), 10 mm x 10 mm | 238-CSBGA (CPG238), 10 mm x 10 mm | 238-CSBGA (CPG238), 10 mm x 10 mm |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 23,360 cells | 23,360 cells | 23,360 cells | 23,360 cells | 23,360 cells | 23,360 cells |
| User I/O | 150 I/O | 150 I/O | 150 I/O | 150 I/O | 150 I/O | 150 I/O |
| DSP Slices | 80 slices | 80 slices | 80 slices | 80 slices | 80 slices | 80 slices |
| Block RAM | 1,620 Kb | 1,620 Kb | 1,620 Kb | 1,620 Kb | 1,620 Kb | 1,620 Kb |
| Speed Grade | -2 | -1 | -2 | -1 | -3 | -3 |
| Temperature Grade Suffix | E | C | C | E | E | C |
| Transceivers | 4 transceivers | 4 transceivers | 4 transceivers | 4 transceivers | 4 transceivers | 4 transceivers |
주요 차별점
- Maintains the -2 performance grade with an extended industrial temperature suffix (vs XC7A25T-2CPG238C)
- Provides one speed grade more margin than the -1 CPG238 option (vs XC7A25T-1CPG238C)
- Combines 150 parallel I/O with four dedicated transceivers (vs XC7A25T-3CPG238C)
설계 노트
Use the AMD Artix-7 package device pinout files for the CPG238 ball assignments before routing the PCB. The 238-CSBGA package on a 10 mm by 10 mm footprint leaves limited escape-routing space, so fanout, layer transitions, and via placement should be planned from the start. Confirm the board stack-up, line width, spacing, and via-in-pad or microvia capability against the assembly process and the manufacturer footprint.
Partition the supply network according to the voltage requirements in the AMD Artix-7 data sheet and place the specified decoupling capacitors directly beside the associated power and ground balls. Separate high-current and sensitive routing where practical, and keep the configuration interface away from switching or high-speed transceiver regions. Verify the complete power tree against worst-case utilization before layout signoff.
Constrain all incoming and outgoing interface timing in Vivado, especially for the 150 user I/O and four transceivers. Use the package pinout files to identify dedicated clocking and transceiver balls, preserve clock cleanliness, and avoid long stubs or unnecessary layer changes on sensitive nets. After routing, inspect timing, skew, and any voltage or timing exceptions rather than relying only on resource-utilization summaries.
Because the 238-CSBGA package concentrates the device and its power delivery in a compact area, provide thermal copper beneath and around the component while maintaining the electrical-clearance and assembly requirements of the package. Estimate junction temperature from the actual board copper, airflow, and configured power rather than assuming that a small package area indicates low dissipation. Validate the thermal solution over the highest expected operating mode.
규정 준수 정보
Compliance declarations for RoHS, REACH, AEC-Q100, lead-free status, halogen-free status, and conflict minerals require confirmation from the current manufacturer product documentation or a compliance certificate for the exact orderable MPN.