XC7K410T-L2FBG676I - Low-Power Kintex-7 FPGA | AMD
MPN: XC7K410T-L2FBG676I ✗ জীবনকালের সমাপ্তিXC7K410T-L2FBG676I সারাংশ
A field-programmable gate array is a semiconductor whose digital functions are defined by loading a configuration bitstream rather than by hardwired logic. The Kintex-7 family occupies the FPGA category within programmable logic and combines a 28 nm FPGA architecture with configurable I/O, DSP48 slices, block RAM, clock management, and transceiver resources. This integration allows designers to implement parallel processing, high-speed interfaces, protocol bridging, and control logic on one device.
The -2L designation identifies the low-power -2L speed grade. AMD documentation states that -2L devices are screened for lower maximum static power and can operate at lower core voltages for lower dynamic power than the -2 grade. The ordering code also identifies 400 user I/O, the FBG676 676-ball FCBGA package, and the industrial temperature option. The exact operating-current limits, voltage ranges, timing thresholds, and transceiver rates are not printed in the product-listing excerpts and must be confirmed in the manufacturer data sheet before design release.
The Kintex-7 architecture is intended for designs that need substantially more processing capacity than small FPGAs without moving to a larger device unnecessarily. Programmable DSP slices accelerate fixed-point filters and transforms, block RAM supports buffering and packet storage, and high-speed serial resources support high-bandwidth links. Resource allocation, clocking, pin constraints, and bitstream generation must be evaluated with the Vivado design tools against the exact device and package variant.
Typical applications include industrial control systems, network-interface equipment, high-speed data acquisition, test and measurement instruments, communications infrastructure, and embedded signal-processing platforms. In these systems, the FPGA can consolidate control, parallel-to-serial conversion, data buffering, and protocol processing while reducing the number of supporting discrete components.
The primary layout consideration is thermal management around the 676-ball FCBGA package. Place power and ground balls according to the AMD package pinout and power-guidance documentation, provide complete power and ground planes, and verify junction temperature under worst-case activity and ambient conditions. The industrial-grade ordering suffix also requires careful review of temperature limits, configuration method, clocking architecture, and qualification requirements.
This page combines ordering-code interpretation, package and I/O facts, sourcing guidance, alternative-device constraints, and practical design reminders to support faster engineering review. Because FPGA substitution depends on exact ball-map, speed-grade, temperature-grade, resource, and I/O compatibility, engineers should treat the listed alternatives as screening candidates and perform a formal migration check before approving any replacement.
এর জন্য ড্রপ-ইন বিকল্প XC7K410T-L2FBG676I — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible XC7K410T-L2FBG676I (একই form factor এবং footprint) — পার্থক্য রয়েছে Device Type, Package, Speed Grade, Mounting Type, Temperature Grade.
XC7K410T-2FBG676I
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC7K410T-1FBG676I
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC7K410T-1FBG676C
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC7K410T-3FBG676E
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC7K410T-3FBG676I
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC7K410T-L2FBG676I সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | Kintex-7 Field Programmable Gate Array (FPGA) |
| User I/O Count | 400 I/O |
| প্যাকেজ | 676-ball FCBGA (FBG676) |
| Speed Grade | -2L |
| Ordering Temperature Grade | Industrial |
| মাউন্টিং টাইপ | Surface mount |
| Process Technology | 28 nm |
| RoHS স্ট্যাটাস | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
XC7K410T-L2FBG676I 676-ball fcbga (fbg676) পিন কনফিগারেশন গাইড
XC7K410T-L2FBG676I (676-ball fcbga (fbg676) প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি XC7K410T-L2FBG676I.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
XC7K410T-L2FBG676I এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control Systems, High-Speed Data Acquisition, Communications Infrastructure, Test and Measurement, Embedded Signal Processing, Aerospace and Defense Systems.
Industrial Control Systems
The XC7K410T-L2FBG676I fits industrial controllers that must combine deterministic control logic with communications and signal processing. Its 400 user I/O provides substantial connectivity for sensors, actuators, encoders, and field-bus transceivers, while the Kintex-7 DSP and RAM resources support real-time filtering or condition monitoring. The -2L speed grade is intended to reduce static and dynamic power relative to standard -2 devices, which is valuable in thermally enclosed cabinets. Before release, verify the industrial temperature limits, I/O standards, transient requirements, and worst-case power through Vivado timing and power analysis.
সুপারিশকৃত
High-Speed Data Acquisition
The XC7K410T-L2FBG676I can serve as the processing fabric in a parallel or serial data-acquisition system. Its programmable logic can implement trigger logic, digital down-conversion, channel synchronization, and protocol conversion, while Kintex-7 block RAM supports local buffering and DSP48 slices accelerate filtering operations. The 676-ball FCBGA package provides the pin density needed for wide parallel interfaces, although board-level routing must preserve timing and signal integrity. Use device-specific timing reports and AMD PCB guidance to set bus widths, clock regions, I/O drive strengths, and termination.
সুপারিশকৃত
Communications Infrastructure
XC7K410T-L2FBG676I is suitable for packet-processing, protocol-conversion, and high-throughput interface equipment built around the Kintex-7 architecture. Programmable logic can perform framing and header processing, DSP resources can accelerate filtering or transforms, and block RAM can support queues and packet buffers. The 400-I/O configuration also allows a balance of parallel data paths and high-speed serial links. Designers must confirm the applicable transceiver count, maximum line rate, reference-clock requirements, and package-specific pin assignments before finalizing the board architecture.
সুপারিশকৃত
Test and Measurement
The XC7K410T-L2FBG676I can consolidate pattern generation, real-time analysis, and instrument control in a test-and-measurement platform. Its Kintex-7 resources support parallel acquisition, programmable filtering, timing instrumentation, and interface adaptation, while the -2L power characteristics help accommodate dense instrumentation in compact enclosures. Exact analog performance remains external to the FPGA, so the digital design should focus on converter interfaces, clock jitter budgets, trigger latency, and deterministic timing. Validate implementation timing and thermal margins under sustained acquisition activity.
সুপারিশকৃত
Embedded Signal Processing
XC7K410T-L2FBG676I provides a combination of programmable logic, DSP48 slices, RAM, and high-speed I/O for embedded signal-processing tasks such as filtering, modulation, demodulation, and spectral analysis. The low-power -2L grade can reduce energy use relative to the standard -2 grade when the design can meet its timing envelope. Resource sharing among DSP, RAM, and fabric is important for achieving a compact implementation. Run synthesis with realistic clock and I/O constraints, then inspect post-implementation timing, power, and thermal results before hardware release.
সুপারিশকৃত
Aerospace and Defense Systems
The XC7K410T-L2FBG676I can be evaluated for complex digital control, navigation assistance, signal processing, and communications functions where substantial logic and I/O are required. Kintex-7 programmable logic, DSP, RAM, and serial resources allow multiple functions to be consolidated in one device, while the extended-temperature ordering option may suit demanding environmental categories. Qualification and compliance must be established for the exact device and project rather than inferred from the family name. Review radiation, temperature, reliability, configuration-security, and long-term availability requirements with AMD and the applicable program authority.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা XC7K410T-L2FBG676I — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | XC7K410T-2FBG676I | XC7K410T-1FBG676I | XC7K410T-1FBG676C | XC7K410T-3FBG676E | XC7K410T-3FBG676I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-ball FCBGA (FBG676) | 676-ball FCBGA (FBG676) | 676-ball FCBGA (FBG676) | 676-ball FCBGA (FBG676) | 676-ball FCBGA (FBG676) | 676-ball FCBGA (FBG676) |
| Device Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Speed Grade | -2L | -2 | -1 | -1 | -3 | -3 |
| Ordering Temperature Suffix | I | I | I | C | E | I |
| Low-Power Grade | Yes (-2L) | No (-2) | No (-1) | No (-1) | No (-3) | No (-3) |
| Design Tool | AMD Vivado | AMD Vivado | AMD Vivado | AMD Vivado | AMD Vivado | AMD Vivado |
মূল পার্থক্যসমূহ
- Lower-power speed-grade selection (বনামXC7K410T-2FBG676I)
- Same-package timing upgrade path (বনামXC7K410T-1FBG676I)
- Industrial ordering option (বনামXC7K410T-1FBG676C)
- Higher timing-performance alternative (বনামXC7K410T-3FBG676E)
ডিজাইন নোট
The FBG676 package requires thermal analysis against the device's maximum junction temperature. Place the FPGA over a continuous ground reference and minimize thermal interruptions beneath the BGA area, while providing thermal-via arrays that connect the package balls to the inner power and ground layers. Compare estimated board-level temperature rise from component power and package thermal data against the worst-case ambient requirement; do not rely on the device's nominal temperature suffix alone.
Use the FBG676-specific package drawing, pin report, and power-guidance material when defining the PCB footprint. The 676-ball package contains dedicated configuration, clock, transceiver, user I/O, power, and ground balls whose assignments cannot be inferred from another 676-ball device. Generate the constraint report in Vivado for the exact -L2FBG676I ordering option and compare every assigned signal against the manufacturer pin table before release.
Do not treat a matching FBG676 package suffix as proof of interchangeable behavior across -1, -2, -2L, and -3 speed grades. Changing the speed grade can alter timing closure, core voltage, static power, dynamic power, and potentially configuration behavior. Create separate Vivado targets, rerun synthesis and implementation, compare timing and power reports, and check migration warnings before approving a different ordering code for production.
High-speed I/O and transceiver routes require package-aware escape routing, continuous reference planes, controlled impedance, and termination appropriate to the selected interface standard. Keep clock inputs and high-speed differential pairs away from noisy power-regulator switching loops, and follow AMD guidance for length matching and layer transitions. Validate the final board with simulation and measurements because successful FPGA timing closure alone does not guarantee compliant channel behavior.
কমপ্লায়েন্স তথ্য
Compliance documents must be confirmed for the exact XC7K410T-L2FBG676I ordering configuration. No definitive material or qualification declarations were included in the available product-listing information.