AMD

XC7K410T-L2FBG676I - Low-Power Kintex-7 FPGA | AMD

N.º da peça: XC7K410T-L2FBG676I ✗ Fim de vida
676-ball FCBGA (FBG676) Package -2L Speed
MOQ: 1 |

XC7K410T-L2FBG676I Visão geral

AMD XC7K410T-L2FBG676I is a Kintex-7 field-programmable gate array with 400 user I/O, a 676-ball FCBGA package, and an -2L speed grade designed for lower static power and lower core-voltage operation. It combines programmable logic, DSP, block RAM, and high-speed serial transceivers in a single FPGA, making it suitable for demanding embedded, industrial, communications, and test systems.

A field-programmable gate array is a semiconductor whose digital functions are defined by loading a configuration bitstream rather than by hardwired logic. The Kintex-7 family occupies the FPGA category within programmable logic and combines a 28 nm FPGA architecture with configurable I/O, DSP48 slices, block RAM, clock management, and transceiver resources. This integration allows designers to implement parallel processing, high-speed interfaces, protocol bridging, and control logic on one device.

The -2L designation identifies the low-power -2L speed grade. AMD documentation states that -2L devices are screened for lower maximum static power and can operate at lower core voltages for lower dynamic power than the -2 grade. The ordering code also identifies 400 user I/O, the FBG676 676-ball FCBGA package, and the industrial temperature option. The exact operating-current limits, voltage ranges, timing thresholds, and transceiver rates are not printed in the product-listing excerpts and must be confirmed in the manufacturer data sheet before design release.

The Kintex-7 architecture is intended for designs that need substantially more processing capacity than small FPGAs without moving to a larger device unnecessarily. Programmable DSP slices accelerate fixed-point filters and transforms, block RAM supports buffering and packet storage, and high-speed serial resources support high-bandwidth links. Resource allocation, clocking, pin constraints, and bitstream generation must be evaluated with the Vivado design tools against the exact device and package variant.

Typical applications include industrial control systems, network-interface equipment, high-speed data acquisition, test and measurement instruments, communications infrastructure, and embedded signal-processing platforms. In these systems, the FPGA can consolidate control, parallel-to-serial conversion, data buffering, and protocol processing while reducing the number of supporting discrete components.

The primary layout consideration is thermal management around the 676-ball FCBGA package. Place power and ground balls according to the AMD package pinout and power-guidance documentation, provide complete power and ground planes, and verify junction temperature under worst-case activity and ambient conditions. The industrial-grade ordering suffix also requires careful review of temperature limits, configuration method, clocking architecture, and qualification requirements.

This page combines ordering-code interpretation, package and I/O facts, sourcing guidance, alternative-device constraints, and practical design reminders to support faster engineering review. Because FPGA substitution depends on exact ball-map, speed-grade, temperature-grade, resource, and I/O compatibility, engineers should treat the listed alternatives as screening candidates and perform a formal migration check before approving any replacement.

Alternativas drop-in para XC7K410T-L2FBG676I — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com XC7K410T-L2FBG676I (mesmo formato e footprint) — diferindo em Device Type, Package, Speed Grade, Mounting Type, Temperature Grade.

AMD
Device Type: Kintex-7 field-programmable gate array
Package: 676-ball FCBGA, FBG676, 27 mm × 27 mm
Speed Grade: -1
Comparar com XC7K410T-L2FBG676I →
AMD
Device Type: Kintex-7 FPGA
Temperature Grade: Industrial
Comparar com XC7K410T-L2FBG676I →
AMD
Device Type: Kintex-7 Field Programmable Gate Array
Package: 676-ball FCBGA
Temperature Grade: Industrial
Comparar com XC7K410T-L2FBG676I →
AMD
Device Type: Field-Programmable Gate Array
Package: 676-ball FCBGA
Speed Grade: -3 grade
Comparar com XC7K410T-L2FBG676I →

XC7K410T-2FBG676I

✅ Drop-In
AMD
📦 676-ball FCBGA (FBG676)
Kintex-7 Field Programmable Gate Array · 406,720 cells · 28,620 Kb · 400 I/O · -2 · Industrial · 676-ball FCBGA · FBG676

Consulte o preço

Ver ficha técnica →

XC7K410T-1FBG676I

✅ Drop-In
AMD
📦 676-ball FCBGA (FBG676)
Kintex-7 FPGA · 406,720 cells · 28 nm · -1 · Industrial · 676-ball Flip Chip BGA (FBG676) · 676 balls · 250 I/O

Consulte o preço

Ver ficha técnica →

XC7K410T-1FBG676C

✅ Drop-In ⚠️ Especificações não verificadas
AMD
📦 676-ball FCBGA (FBG676)
Kintex-7 field-programmable gate array · 406,720 cells · 65,360 registers · 28,620 Kb · 1,540 slices · 400 I/O · 28 nm · -1

Consulte o preço

Ver ficha técnica →

XC7K410T-3FBG676E

✅ Drop-In ⚠️ Especificações não verificadas
AMD
📦 676-ball FCBGA (FBG676)
Kintex-7 · Field-Programmable Gate Array · 406,720 cells · 28,620 Kb · 400 I/O · 676-ball FCBGA · FBG676 · -3 grade

Consulte o preço

Ver ficha técnica →

XC7K410T-3FBG676I

✅ Drop-In ⚠️ Especificações não verificadas
📦 676-ball FCBGA (FBG676)
-3 speed grade instead of -2L, with a higher timing-performance bin and different power profile

📋 Alternativa de referência (fora do catálogo)

XC7K410T-L2FBG676I Classificações máximas e características elétricas

Device Type Kintex-7 Field Programmable Gate Array (FPGA)
User I/O Count 400 I/O
Encapsulamento 676-ball FCBGA (FBG676)
Speed Grade -2L
Ordering Temperature Grade Industrial
Tipo de montagem Surface mount
Process Technology 28 nm
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification unknown

Guia de Configuração de Pinos do XC7K410T-L2FBG676I 676-ball fcbga (fbg676)

Configuração de pinos para XC7K410T-L2FBG676I (pacote 676-ball fcbga (fbg676)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 676-ball fcbga (fbg676) para XC7K410T-L2FBG676I

Nenhum dado detalhado de pinagem disponível para XC7K410T-L2FBG676I.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

XC7K410T-L2FBG676I é adequado para 6 aplicaçãos: Industrial Control Systems, High-Speed Data Acquisition, Communications Infrastructure, Test and Measurement, Embedded Signal Processing, Aerospace and Defense Systems.

🏭

Industrial Control Systems

The XC7K410T-L2FBG676I fits industrial controllers that must combine deterministic control logic with communications and signal processing. Its 400 user I/O provides substantial connectivity for sensors, actuators, encoders, and field-bus transceivers, while the Kintex-7 DSP and RAM resources support real-time filtering or condition monitoring. The -2L speed grade is intended to reduce static and dynamic power relative to standard -2 devices, which is valuable in thermally enclosed cabinets. Before release, verify the industrial temperature limits, I/O standards, transient requirements, and worst-case power through Vivado timing and power analysis.

⚡

High-Speed Data Acquisition

The XC7K410T-L2FBG676I can serve as the processing fabric in a parallel or serial data-acquisition system. Its programmable logic can implement trigger logic, digital down-conversion, channel synchronization, and protocol conversion, while Kintex-7 block RAM supports local buffering and DSP48 slices accelerate filtering operations. The 676-ball FCBGA package provides the pin density needed for wide parallel interfaces, although board-level routing must preserve timing and signal integrity. Use device-specific timing reports and AMD PCB guidance to set bus widths, clock regions, I/O drive strengths, and termination.

🌐

Communications Infrastructure

XC7K410T-L2FBG676I is suitable for packet-processing, protocol-conversion, and high-throughput interface equipment built around the Kintex-7 architecture. Programmable logic can perform framing and header processing, DSP resources can accelerate filtering or transforms, and block RAM can support queues and packet buffers. The 400-I/O configuration also allows a balance of parallel data paths and high-speed serial links. Designers must confirm the applicable transceiver count, maximum line rate, reference-clock requirements, and package-specific pin assignments before finalizing the board architecture.

🔧

Test and Measurement

The XC7K410T-L2FBG676I can consolidate pattern generation, real-time analysis, and instrument control in a test-and-measurement platform. Its Kintex-7 resources support parallel acquisition, programmable filtering, timing instrumentation, and interface adaptation, while the -2L power characteristics help accommodate dense instrumentation in compact enclosures. Exact analog performance remains external to the FPGA, so the digital design should focus on converter interfaces, clock jitter budgets, trigger latency, and deterministic timing. Validate implementation timing and thermal margins under sustained acquisition activity.

📱

Embedded Signal Processing

XC7K410T-L2FBG676I provides a combination of programmable logic, DSP48 slices, RAM, and high-speed I/O for embedded signal-processing tasks such as filtering, modulation, demodulation, and spectral analysis. The low-power -2L grade can reduce energy use relative to the standard -2 grade when the design can meet its timing envelope. Resource sharing among DSP, RAM, and fabric is important for achieving a compact implementation. Run synthesis with realistic clock and I/O constraints, then inspect post-implementation timing, power, and thermal results before hardware release.

✈️

Aerospace and Defense Systems

The XC7K410T-L2FBG676I can be evaluated for complex digital control, navigation assistance, signal processing, and communications functions where substantial logic and I/O are required. Kintex-7 programmable logic, DSP, RAM, and serial resources allow multiple functions to be consolidated in one device, while the extended-temperature ordering option may suit demanding environmental categories. Qualification and compliance must be established for the exact device and project rather than inferred from the family name. Review radiation, temperature, reliability, configuration-security, and long-term availability requirements with AMD and the applicable program authority.

What is the XC7K410T-L2FBG676I?
The XC7K410T-L2FBG676I is an AMD Kintex-7 FPGA with 400 user I/O in a 676-ball FCBGA package. Its -2L speed grade is intended for lower static and dynamic power than the standard -2 grade. According to the AMD Kintex-7 data sheet, the device integrates programmable logic, DSP48 slices, block RAM, clocking resources, and high-speed serial transceivers for complex embedded and signal-processing designs.
What does the L2 in XC7K410T-L2FBG676I mean?
The -2L in XC7K410T-L2FBG676I identifies AMD's low-power -2L Kintex-7 speed grade. AMD documentation states that -2L devices are screened for lower maximum static power and can operate at lower core voltages, producing lower dynamic power than standard -2 devices. The distinction affects power planning and timing validation, so the complete ordering code must be selected in the Vivado device list for production.
What package does XC7K410T-L2FBG676I use?
The XC7K410T-L2FBG676I uses the FBG676 package, a 676-ball flip-chip ball-grid-array package with 400 user I/O. According to the AMD product ordering information, the FBG package is intended for high-pin-count Kintex-7 designs. PCB designers should use the package-specific ball map, power planes, escape routing, and thermal design from the manufacturer documentation rather than relying on a generic 676-ball footprint.
Where can I download the XC7K410T-L2FBG676I datasheet PDF?
The XC7K410T-L2FBG676I datasheet PDF is available through the AMD Kintex-7 documentation entry linked on this page and from the mirrored manufacturer PDF listing. The document identifies the Kintex-7 family, available speed grades, package information, architecture, and device characteristics. For design release, also consult the package pinout, power-guidance, configuration, and PCB-design documents corresponding to FBG676.
Where is the XC7K410T-L2FBG676I pinout?
The XC7K410T-L2FBG676I pinout is contained in the package-specific FBG676 pinout table in the AMD Kintex-7 documentation. It identifies every power ball, ground ball, configuration pin, clock pin, and user I/O. Use the exact -L2FBG676I device selection in Vivado when generating the package pin report, and cross-check that report against the manufacturer's package drawing before assigning PCB nets.
XC7K410T 2FBG676I versus XC7K410T 2FFG676I: which package is correct?
The XC7K410T-L2FBG676I specifically uses the FBG676 package, while XC7K410T-2FFG676I is identified as an FFG676 ordering option. Both appear in Kintex-7 family documentation, but their package identifiers must not be treated as interchangeable without checking the AMD package drawings. For the requested ordering code, select FBG676 and use its exact 676-ball pinout and PCB footprint.
What can replace XC7K410T-L2FBG676I?
XC7K410T-L2FBG676I can be screened against Kintex-7 devices using the same FBG676 footprint, including XC7K410T-2FBG676I, XC7K410T-1FBG676I, and XC7K410T-3FBG676E. A replacement still requires verification of speed grade, temperature grade, bitstream compatibility, ball assignments, I/O standards, transceiver resources, power behavior, timing, and design-tool support. Use Vivado migration reports rather than assuming that a similar ordering code is production-equivalent.
Is XC7K410T-L2FBG676I suitable for industrial control systems?
The XC7K410T-L2FBG676I is marked as an industrial-temperature ordering option and combines 400 user I/O with Kintex-7 programmable logic, DSP, RAM, and serial resources. These characteristics suit industrial controllers that coordinate sensors, actuators, communications, and real-time processing. Final suitability depends on the manufacturer temperature limits, system power budget, environmental requirements, and safety certification obligations of the finished equipment.
What is the difference between XC7K410T-L2FBG676I and XC7K410T-2FBG676I?
The principal ordering-code difference is the -2L low-power speed grade in XC7K410T-L2FBG676I versus the standard -2 grade in XC7K410T-2FBG676I. Both use the FBG676 676-ball package, but their power and timing characteristics are not interchangeable by assumption. Review the AMD data sheet, verify Vivado timing closure, and compare static and dynamic power before approving the standard -2 device as a substitute.
When should I choose the -2L XC7K410T rather than a standard -2 device?
Choose XC7K410T-L2FBG676I when the design benefits from the lower-power -2L screening and can meet its timing constraints. AMD states that -2L devices target lower maximum static power and lower core-voltage operation. Retain a standard -2 Kintex-7 option when the design needs its different timing profile or power envelope, and make the decision from post-layout power and timing analysis rather than ordering-code similarity.
How much power does XC7K410T-L2FBG676I use?
XC7K410T-L2FBG676I power consumption depends on core voltage, selected resources, I/O activity, transceiver state, junction temperature, and the device-specific production settings. AMD identifies the -2L grade as lower-power relative to the standard -2 grade, but the exact static and dynamic current limits require the manufacturer data sheet. Estimate the board-level budget with Vivado power analysis after constraints, clocking, utilization, and activity have been entered.
Can XC7K410T-L2FBG676I be used for high-speed signal processing?
The XC7K410T-L2FBG676I can support high-speed signal-processing designs because Kintex-7 devices integrate DSP48 slices, block RAM, high-speed I/O, clock-management resources, and serial transceivers. The applicable interface rate depends on the selected transceiver or I/O path, pin assignments, board-level signal integrity, clocking, and the exact speed grade. Use AMD transceiver and PCB guidance to select connectors, termination, and routing geometry.
Which Vivado tools support XC7K410T-L2FBG676I?
XC7K410T-L2FBG676I is supported as a Kintex-7 device in AMD's Vivado FPGA design environment. The toolset covers architecture selection, constraint definition, synthesis, implementation, bitstream generation, and programming through the appropriate configuration method. Add the exact -L2FBG676I ordering option to the project, then review migration and timing reports to confirm that speed-grade and package assumptions are correct.
Is XC7K410T-L2FBG676I RoHS compliant?
The RoHS status of XC7K410T-L2FBG676I cannot be confirmed from the ordering information shown on this page. Because package and ordering suffix can affect the exact material declaration, engineers should request the current manufacturer declaration for the complete MPN. The same caution applies to REACH, lead-free, halogen-free, and conflict-minerals documentation, which must be linked to the exact shipped configuration.
How do I check whether XC7K410T-L2FBG676I is in stock?
Use the Request a Quote form on this page to check current XC7K410T-L2FBG676I stock, quantity breaks, and lead time with XAIPART. A listing's presence does not itself confirm current inventory, and large FPGA orders can depend on scheduled allocation and production planning. Include your required quantity, target delivery date, approved-source requirements, and date-code constraints in the request.
What is the price of XC7K410T-L2FBG676I?
Current XC7K410T-L2FBG676I pricing and quantity availability should be requested through the Request a Quote form on this page. Pricing for this FPGA can vary with quantity, allocation, date-code requirements, and packaging configuration. The quote request should identify the complete MPN, required quantity, delivery date, and any inspection or traceability requirements so the response reflects the correct orderable configuration.
What is the lead time for XC7K410T-L2FBG676I?
The current lead time for XC7K410T-L2FBG676I should be confirmed through the Request a Quote form on this page. Lead time can vary with available inventory, production allocation, order volume, and special date-code or inspection requirements. State the required delivery date and annual usage profile when requesting a quote so planning can reflect both initial material acquisition and replenishment expectations.

Dados de referência de engenharia para XC7K410T-L2FBG676I — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose XC7K410T-L2FBG676I when the design needs the Kintex-7 architecture in the FBG676 package and prioritizes the lower-power -2L grade while still meeting its timing requirements. XC7K410T-2FBG676I is the closest standard-speed comparison and should be selected when the standard -2 timing profile is required or preferred. XC7K410T-1FBG676I may fit relaxed timing requirements but can reduce available performance, while XC7K410T-1FBG676C requires commercial-temperature suitability. XC7K410T-3FBG676E offers a higher speed bin and extended-temperature ordering for qualifying designs, while XC7K410T-3FBG676I provides the higher speed bin with an industrial suffix. All candidates use the same package identifier, but speed grade, temperature grade, timing, power, and migration behavior must be verified separately in Vivado before substitution.

Comparação com alternativas

Parâmetro Este produto XC7K410T-2FBG676I XC7K410T-1FBG676I XC7K410T-1FBG676C XC7K410T-3FBG676E XC7K410T-3FBG676I
Brand AMD AMD AMD AMD AMD AMD
Package 676-ball FCBGA (FBG676) 676-ball FCBGA (FBG676) 676-ball FCBGA (FBG676) 676-ball FCBGA (FBG676) 676-ball FCBGA (FBG676) 676-ball FCBGA (FBG676)
Device Family Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7
Speed Grade -2L -2 -1 -1 -3 -3
Ordering Temperature Suffix I I I C E I
Low-Power Grade Yes (-2L) No (-2) No (-1) No (-1) No (-3) No (-3)
Design Tool AMD Vivado AMD Vivado AMD Vivado AMD Vivado AMD Vivado AMD Vivado

Principais diferenciais

  • Lower-power speed-grade selection (vs XC7K410T-2FBG676I)
  • Same-package timing upgrade path (vs XC7K410T-1FBG676I)
  • Industrial ordering option (vs XC7K410T-1FBG676C)
  • Higher timing-performance alternative (vs XC7K410T-3FBG676E)

Notas de projeto

The FBG676 package requires thermal analysis against the device's maximum junction temperature. Place the FPGA over a continuous ground reference and minimize thermal interruptions beneath the BGA area, while providing thermal-via arrays that connect the package balls to the inner power and ground layers. Compare estimated board-level temperature rise from component power and package thermal data against the worst-case ambient requirement; do not rely on the device's nominal temperature suffix alone.

Use the FBG676-specific package drawing, pin report, and power-guidance material when defining the PCB footprint. The 676-ball package contains dedicated configuration, clock, transceiver, user I/O, power, and ground balls whose assignments cannot be inferred from another 676-ball device. Generate the constraint report in Vivado for the exact -L2FBG676I ordering option and compare every assigned signal against the manufacturer pin table before release.

Do not treat a matching FBG676 package suffix as proof of interchangeable behavior across -1, -2, -2L, and -3 speed grades. Changing the speed grade can alter timing closure, core voltage, static power, dynamic power, and potentially configuration behavior. Create separate Vivado targets, rerun synthesis and implementation, compare timing and power reports, and check migration warnings before approving a different ordering code for production.

High-speed I/O and transceiver routes require package-aware escape routing, continuous reference planes, controlled impedance, and termination appropriate to the selected interface standard. Keep clock inputs and high-speed differential pairs away from noisy power-regulator switching loops, and follow AMD guidance for length matching and layer transitions. Validate the final board with simulation and measurements because successful FPGA timing closure alone does not guarantee compliant channel behavior.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance documents must be confirmed for the exact XC7K410T-L2FBG676I ordering configuration. No definitive material or qualification declarations were included in the available product-listing information.

Dados verificados em: 2026-11-18 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

xc7k410t 2fbg676i xc7k410t 2ffg676i xc7k410t 2ffg900i xc7k410t 1ffg900i xc7k410t datasheet xc7k410t 2fbg900i xc7k410t fpga xc7k410t ffg900 xc7k410t 1ffg900c XC7K410T-L2FBG676I pinout XC7K410T-L2FBG676I replacement AMD XC7K410T-L2FBG676I

Componentes & termos relacionados

AMD XC7K410T-L2FBG676I XC7K410T-2FBG676I XC7K410T-1FBG676I XC7K410T-1FBG676C XC7K410T-3FBG676E XC7K410T-3FBG676I Kintex-7 field-programmable gate array FPGA programmable logic DSP48 slice block RAM high-speed transceiver Vivado FBG676 676-ball FCBGA BGA package surface mount 28 nm process technology industrial temperature grade -2L speed grade power supply rejection FPGA configuration bitstream
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ