XC7Z014S-1CLG400I - 65K Zynq SoC FPGA | AMD
MPN: XC7Z014S-1CLG400I ✓ সক্রিয়XC7Z014S-1CLG400I সারাংশ
A Zynq-7000S SoC FPGA is a heterogeneous programmable-logic device that integrates an Arm processor system with FPGA fabric, programmable I/O, memory controllers, and serial peripherals. This combination places software-controlled processing and hardware-parallel logic in one package, supporting the FPGA & CPLD category within the broader integrated-circuit and semiconductor hierarchy. Unlike a discrete processor and FPGA combination, the integrated architecture can reduce inter-device communication and board complexity.
The device provides 65K logic cells and a 667 MHz processor clock in the XC7Z014S configuration. Its connectivity options support industrial control, communications equipment, embedded vision, networking appliances, and data-processing systems. CoreSight provides integrated debug visibility for processor and system development. The CLG400 package offers 400 ball contacts and is intended for surface-mount PCB assembly rather than through-hole installation.
The target combines a single Arm Cortex-A9 MPCore processor with an Artix-7 FPGA fabric, allowing Linux-capable or bare-metal software workloads to cooperate with dedicated hardware pipelines. Programmable logic can handle parallel interfaces, real-time filtering, protocol acceleration, or sensor aggregation, while the processor manages control flow, operating systems, networking stacks, and supervisory functions. Design engineers should still verify interface timing, memory-device compatibility, pin constraints, and Vivado target support against the AMD data sheet DS187 and package-pinout files.
Typical uses include industrial gateways, motor-control and automation platforms, embedded camera and vision systems, communications infrastructure, and data-acquisition equipment. The processor handles configuration and higher-level control, while FPGA logic accelerates fixed-function operations. Connectivity such as Ethernet, CAN bus, USB OTG, UART/USART, SPI, and I2C allows the SoC to interface with sensors, transceivers, memory, and service interfaces without relying exclusively on discrete peripheral devices.
The principal design consideration is migration discipline. A device with the same CLG400 package does not automatically qualify as a drop-in replacement because FPGA resources, processor configuration, temperature grade, and exposed interfaces can differ. Confirm the exact ordering code, review the package pinout, regenerate the Vivado constraints, and repeat timing and hardware validation before substituting any alternative into a deployed board.
This page combines the XC7Z014S-1CLG400I core specifications with package details, practical application guidance, and explicit migration checks for CLG400 candidates. It is intended to help engineers identify the correct Zynq-7000S configuration, verify pin and resource compatibility, and plan firmware, FPGA-image, and PCB validation before a replacement decision.
এর জন্য ড্রপ-ইন বিকল্প XC7Z014S-1CLG400I — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible XC7Z014S-1CLG400I (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Mounting Type, FPGA Logic Cells, Connectivity, Device Type.
XC7Z020-1CLG400I
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC7Z014S-1CLG400C
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC7Z014S-1CLG400I সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | Zynq-7000S system-on-chip FPGA |
| FPGA Logic Cells | 65K logic cells |
| Processor | Single Arm Cortex-A9 MPCore processor |
| Processor Clock | 667 MHz |
| Debug Support | CoreSight |
| FPGA Fabric | Artix-7 FPGA fabric |
| প্যাকেজ | 400-CSPBGA (17 x 17 mm) |
| Package Contact Count | 400 balls |
| মাউন্টিং টাইপ | Surface mount |
| Connectivity | CAN bus, Ethernet, I2C, MMC/SD/SDIO, SPI, UART/USART, USB OTG |
| Product Family | Zynq-7000S |
| Speed Grade | -1 speed grade |
XC7Z014S-1CLG400I 400 balls পিন কনফিগারেশন গাইড
XC7Z014S-1CLG400I (400 balls প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি XC7Z014S-1CLG400I.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
XC7Z014S-1CLG400I এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Automation Controller, Embedded Vision and Sensor Processing, Industrial Ethernet Gateway, Motor Control Platform, Data Acquisition and Signal Processing, Secure Communications Equipment.
Industrial Automation Controller
The AMD XC7Z014S-1CLG400I fits industrial automation because it combines a 667 MHz Cortex-A9 processor with 65K Artix-7 logic cells in one 400-CSPBGA device. The processor can run control software, state management, communications services, and diagnostics, while the FPGA fabric handles parallel I/O, timing-critical sequencing, and signal conditioning. Ethernet, CAN bus, UART/USART, SPI, and I2C support connections to sensors, motor-control electronics, remote I/O, and supervisory equipment. The design advantage is reduced inter-device communication, although the dense package still requires careful power distribution, thermal analysis, and signal-integrity review.
সুপারিশকৃত
Embedded Vision and Sensor Processing
The XC7Z014S-1CLG400I can divide embedded vision workloads between its 667 MHz Cortex-A9 processor and 65K cells of programmable FPGA fabric. Software can coordinate image acquisition, control, networking, and system management, while FPGA logic performs pixel transport, thresholding, filtering, or interface conversion in parallel. This division is useful when deterministic throughput is more important than executing every operation sequentially. MMC/SD/SDIO can support suitable storage media, while Ethernet and USB OTG provide paths for image or sensor data transfer. Camera timing, memory bandwidth, and continuous thermal dissipation must be evaluated in the final board design.
সুপারিশকৃত
Industrial Ethernet Gateway
The AMD XC7Z014S-1CLG400I is suitable for an industrial Ethernet gateway because its Cortex-A9 processor can manage protocol stacks, routing logic, security functions, and device management, while the Artix-7 fabric can accelerate packet handling or peripheral functions. Ethernet connectivity supports external network equipment, while CAN bus, UART/USART, SPI, and I2C allow the gateway to interface with sensors and field modules. The 400-CSPBGA package integrates a complex SoC and programmable logic on a 17 x 17 mm footprint. Deployment planning should include clock-cleanliness requirements, Ethernet interface characteristics, memory topology, thermal rise, and EMC compliance.
সুপারিশকৃত
Motor Control Platform
The XC7Z014S-1CLG400I can serve as the central controller in a motor-control platform by assigning deterministic pulse generation, encoder processing, and protection timing to its 65K-cell FPGA fabric. The 667 MHz Cortex-A9 processor can execute motion algorithms, supervisory control, communications, and diagnostics. Available CAN bus and UART/USART links support communication with drives, diagnostics equipment, or service interfaces, while SPI and I2C can connect to converters and sensors. This heterogeneous arrangement allows software flexibility and hardware timing to coexist, but current-loop bandwidth, feedback latency, isolation strategy, and thermal behavior should be verified before production release.
সুপারিশকৃত
Data Acquisition and Signal Processing
The AMD XC7Z014S-1CLG400I supports data-acquisition designs that need flexible connectivity and programmable data processing. The FPGA fabric can implement parallel sampling pipelines, digital filters, trigger logic, and interface adaptation, while the Cortex-A9 processor performs configuration, calibration, buffering, and higher-level analysis. Ethernet and USB OTG enable data transfer, and SPI or I2C can connect to converters and sensors. The 65K logic-cell and 667 MHz processor combination provides substantial flexibility without separating the processor and FPGA into two devices. Sampling accuracy, clock jitter, memory throughput, data-loss avoidance, and sustained thermal performance remain key engineering checks.
সুপারিশকৃত
Secure Communications Equipment
The XC7Z014S-1CLG400I can support communications equipment that requires both a processor and high-throughput programmable logic. The Cortex-A9 processor can manage control-plane tasks, protocols, configuration, and operating-system functions, while the 65K-cell Artix-7 fabric can accelerate framing, encryption-related datapaths, buffering, or custom interfaces. Ethernet, CAN bus, SPI, UART/USART, and USB OTG provide several external communication paths. Co-locating programmable logic with the processor can reduce data movement across package boundaries, though security certification, protocol timing, memory reliability, and EMI performance must be addressed by the complete design rather than inferred from the device identity alone.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা XC7Z014S-1CLG400I — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | XC7Z020-1CLG400I | XC7Z014S-1CLG400C |
|---|---|---|---|
| Package | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) |
| Brand | AMD | AMD | AMD |
| Product Type | Zynq-7000S system-on-chip FPGA | Zynq-7000 system-on-chip FPGA | Zynq-7000S system-on-chip FPGA |
| FPGA Logic Cells | 65K logic cells | 85K logic cells | 65K logic cells |
| Processor | Single Arm Cortex-A9 MPCore processor | Dual-core Cortex-A9 configuration | Single Arm Cortex-A9 MPCore processor |
| Ordering Suffix | I suffix | I suffix | C suffix |
| Connectivity | CAN bus, Ethernet, I2C, MMC/SD/SDIO, SPI, UART/USART, USB OTG | CAN bus, Ethernet, I2C, MMC/SD/SDIO, SPI, UART/USART, USB OTG | CAN bus, Ethernet, I2C, MMC/SD/SDIO, SPI, UART/USART, USB OTG |
মূল পার্থক্যসমূহ
- 65K logic cells in a compact Zynq-7000S configuration (বনামXC7Z020-1CLG400I)
- Single Cortex-A9 processor configuration (বনামXC7Z020-1CLG400I)
- Exact XC7Z014S device identity with the I ordering suffix (বনামXC7Z014S-1CLG400C)
ডিজাইন নোট
Do not treat a shared CLG400 package as proof of a drop-in replacement. Confirm the exact device identifier, FPGA resource count, processor configuration, memory architecture, clock requirements, and temperature qualification. After selecting a candidate, change the Vivado target, regenerate constraints and bitstream, and rerun timing analysis. A replacement that compiles successfully can still require different DDR configuration, boot behavior, or power sequencing.
Use AMD's Zynq-7000 package-device pinout files and the selected device's pinout CSV as the PCB assignment authority. Route power, ground, configuration, clock, and high-speed interface signals according to the manufacturer package guidelines, and preserve the 400-CSPBGA land pattern. The 17 x 17 mm package has dense ball spacing, so inspect assembly clearances and verify the PCB design rules used by the board manufacturer before fabrication.
Estimate the XC7Z014S-1CLG400I junction temperature from processor activity, FPGA utilization, I/O loading, ambient temperature, and the board's thermal path. The processor clock and logic-cell count identify the workload capacity but do not by themselves establish a safe dissipation limit. Validate the final assembly with the intended airflow and enclosure, check the hottest operating scenario, and use AMD's device specifications to determine the applicable thermal limits and derating requirements.
Separate processor, FPGA, memory, and high-speed I/O return-current paths, and place decoupling and clock-support components according to the reference design and package guidance. Place configuration and mode-selection nets so their states cannot float unintentionally during power-up. Validate high-speed links with appropriate eye, jitter, and compliance measurements because successful FPGA timing closure does not guarantee correct signal integrity at the package, PCB, or connector interface.
কমপ্লায়েন্স তথ্য
The I suffix indicates an industrial-oriented ordering option, but numerical environmental limits and formal RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements require confirmation from the manufacturer. Safe operating area data does not apply because this is a digital FPGA and SoC rather than a discrete power semiconductor.