XC7Z020-L1CLG400I - 667MHz Zynq SoC FPGA | AMD
MPN: XC7Z020-L1CLG400I ✓ সক্রিয়XC7Z020-L1CLG400I সারাংশ
A Zynq-7000 SoC is a system-on-chip platform that integrates a hard processor subsystem with programmable FPGA logic. The ARM Cortex-A9 processor subsystem handles operating-system and application software, while the Artix-7 fabric accelerates parallel data processing, control logic, interfaces, and other time-critical functions. This combination reduces component count and simplifies communication between software and programmable hardware compared with separate processor and FPGA designs.
Key features include a dual ARM Cortex-A9 MPCore processor, CoreSight debugging, 85K logic cells, and a 667 MHz operating frequency. The L1 speed grade and industrial temperature suffix identify this as a low-power industrial-grade configuration. The CLG400 package provides 400 physical balls in a 17 x 17 mm CSPBGA footprint, allowing a large number of I/O and power connections on a compact board.
The device supports the Zynq-7000 family architecture, including programmable logic resources, hard processor functionality, dedicated memory interfaces, and integrated debug capabilities. This makes it suitable for designs requiring both sequential control and parallel hardware processing. The exact I/O count, memory capacity, power ratings, and detailed timing limits are not stated in the distributor summaries and should be taken from the AMD Zynq-7000 data sheet.
Typical applications include industrial automation, embedded control, communications equipment, test and measurement systems, image-processing front ends, and general-purpose embedded platforms. In these systems, the processor can run control software or an operating system while FPGA logic handles deterministic interfaces, signal conditioning, protocol conversion, or parallel data acquisition.
The 400-ball CSPBGA package requires careful PCB layout, including controlled-impedance routing, multiple power rails, adequate decoupling, and thermal management. Use the AMD Zynq-7000 package pinout files and the corresponding device data sheet when assigning power, ground, configuration, clock, and I/O balls; do not infer ball assignments from a generic BGA drawing.
This page organizes the verified product identity, package information, technical distinctions, drop-in alternatives, application context, and engineering guidance for engineers evaluating the XC7Z020-L1CLG400I. The most important selection checks are processor and FPGA resource compatibility, industrial temperature requirements, speed grade, package footprint, power sequencing, and toolchain support for the deployed Zynq design.
এর জন্য ড্রপ-ইন বিকল্প XC7Z020-L1CLG400I — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible XC7Z020-L1CLG400I (একই form factor এবং footprint) — পার্থক্য রয়েছে Device Type, Mounting Type, Package Dimensions, Processor Core, Temperature Grade.
XC7Z020-1CLG400I
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC7Z020-2CLG400I
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC7Z020-1CLG400C
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC7Z010-L1CLG400I
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC7Z010-1CLG400I
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
XA7Z010-1CLG400I
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC7Z020-L1CLG400I সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | Zynq-7000 SoC FPGA |
| Processor | Dual ARM Cortex-A9 MPCore |
| Processor Maximum Frequency | 667 MHz |
| FPGA Family | Artix-7 |
| Logic Cells | 85K |
| Debug Support | CoreSight |
| প্যাকেজ | 400-CSPBGA (17 x 17 mm) |
| Package Pin or Ball Count | 400 balls |
| মাউন্টিং টাইপ | Surface Mount |
| Temperature Grade | Industrial |
| Speed Grade | L1 |
XC7Z020-L1CLG400I 400 balls পিন কনফিগারেশন গাইড
XC7Z020-L1CLG400I (400 balls প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি XC7Z020-L1CLG400I.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
XC7Z020-L1CLG400I এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Automation Controller, Communications Gateway, Test and Measurement System, Image Processing Front End, Industrial Sensor Hub, Secure Embedded Platform.
Industrial Automation Controller
The AMD XC7Z020-L1CLG400I fits industrial automation controllers because it combines a dual ARM Cortex-A9 processor running at up to 667 MHz with an 85K-logic-cell Artix-7 fabric. Software can manage communications, configuration, and supervisory functions, while programmable logic handles deterministic machine timing and parallel I/O. The 400-CSPBGA package supplies a concentrated connection set for complex controllers, while the L1 low-power designation makes it a sensible starting point for power-constrained embedded equipment. Confirm the exact operating-temperature range, supply rails, power budget, and industrial qualification requirements in the AMD Zynq-7000 documentation before production release.
সুপারিশকৃত
Communications Gateway
The XC7Z020-L1CLG400I is suitable for communications gateways that need protocol handling, network services, and hardware-accelerated datapaths in one package. The ARM Cortex-A9 subsystem can run networking or control software, while the Artix-7 fabric can implement parallel packet handling, custom serializers, or low-latency interface logic. Its 667 MHz processor performance and 85K logic cells provide a useful balance for edge gateways that must fit a compact board. Use the CLG400 package files to assign high-speed I/O, power, clocks, and configuration signals, and validate signal integrity with the complete PCB stack-up.
সুপারিশকৃত
Test and Measurement System
The AMD XC7Z020-L1CLG400I can implement a mixed-signal test instrument by using the FPGA fabric for acquisition logic, timing control, and stimulus generation while the ARM subsystem handles instrument control, data preparation, and user-facing software. The 85K logic cells make the device relevant for moderate parallel-channel systems, while the processor simplifies control-flow and data-transfer tasks. The L1 low-power speed designation can benefit portable or rack-mounted systems, but total thermal design must include processor, FPGA, memory, and I/O activity. Derive power and junction-temperature limits from AMD data rather than estimating them from the 667 MHz frequency.
সুপারিশকৃত
Image Processing Front End
The XC7Z020-L1CLG400I can serve as an image-processing front end when a design combines sensor-interface timing with higher-level processing. The Artix-7 fabric can implement parallel pixel pipelines, lookup tables, thresholding, or compression stages, while the dual ARM Cortex-A9 subsystem manages configuration and application-level tasks. This division supports streaming architectures that would otherwise require a separate processor and FPGA. The device's 667 MHz CPU rating and 85K logic-cell count should be matched to the actual channel count, pixel rate, and memory bandwidth. Validate memory interfaces and high-speed I/O against the exact package and timing constraints.
সুপারিশকৃত
Industrial Sensor Hub
The XC7Z020-L1CLG400I is appropriate for an industrial sensor hub that must collect multiple inputs, perform local filtering, and present processed data through an embedded protocol stack. The FPGA fabric can implement sensor timing, digital filtering, diagnostics, and data packing, while the ARM Cortex-A9 processors handle configuration, logging, and network communication. The CLG400 package provides many package balls for power, clock, control, and mixed I/O assignments, and the L1 low-power grade is relevant where cooling or battery capacity is constrained. Confirm that every required interface and voltage rail is present in the exact CLG400 package and that the industrial temperature requirements are met.
সুপারিশকৃত
Secure Embedded Platform
The XC7Z020-L1CLG400I can support secure embedded platforms where Linux-capable processor software must coexist with protected programmable logic and custom peripherals. The ARM subsystem can manage authentication, policy, and application services, while isolated FPGA logic can implement hardware-assisted security, secure I/O, or fixed-function data paths. CoreSight debug capability assists development and diagnostics, although production security still requires appropriate debug-access controls, boot protection, and key-management design. Because the verified information does not state the device's specific security features, use the AMD Zynq-7000 data sheet and device security documentation before making a compliance claim.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা XC7Z020-L1CLG400I — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | XC7Z020-1CLG400I | XC7Z020-2CLG400I | XC7Z020-1CLG400C | XC7Z010-L1CLG400I | XC7Z010-1CLG400I |
|---|---|---|---|---|---|---|
| Package | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Type | Zynq-7000 SoC FPGA | Zynq-7000 SoC FPGA | Zynq-7000 SoC FPGA | Zynq-7000 SoC FPGA | Zynq-7000 SoC FPGA | Zynq-7000 SoC FPGA |
| Processor | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore |
| Speed Grade | L1 | -1 | -2 | -1 | L1 | -1 |
| Temperature Grade | Industrial | Industrial | Industrial | Commercial | Industrial | Industrial |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
মূল পার্থক্যসমূহ
- Low-power L1 speed designation (বনামXC7Z020-1CLG400I)
- Industrial temperature suffix (বনামXC7Z020-1CLG400C)
- Full XC7Z020 resource class (বনামXC7Z010-L1CLG400I)
ডিজাইন নোট
Treat the CLG400 device as a complex BGA rather than a conventional peripheral. Use AMD's CLG400 package data to place all power, ground, configuration, clock, and I/O balls, and follow the recommended stack-up, via, solder-mask, and land-pattern guidance for the assembly process. Maintain continuous return paths beneath high-speed nets and avoid splits that disrupt power or ground planes. The 17 x 17 mm package can create a demanding escape-routing problem around the perimeter, so complete escape routing before committing to component placement.
Separate the processor, FPGA core, I/O, and auxiliary supply requirements using the AMD recommended power architecture. Place required bulk and high-frequency decoupling capacitors at the associated supply balls, with the shortest practical connection from each capacitor to its device-side ground or supply via. Validate every rail's sequencing, voltage tolerance, startup behavior, and load-current margin against the exact XC7Z020 speed grade. Do not reuse the XC7Z010 power budget for the XC7Z020, because resource utilization and current requirements differ.
Estimate thermal performance across the full product envelope, including maximum processor utilization, FPGA activity, memory traffic, and sustained I/O loading. The L1 low-power designation should be considered during part selection, but it does not remove the need for a junction-temperature check. Use the manufacturer's power data and thermal model, provide adequate copper and thermal vias under the package, and evaluate the assembled board in its enclosure. Validate the highest expected ambient temperature rather than relying on a typical laboratory condition.
Do not treat a matching CLG400 package as proof that every XC7Z020 speed grade is interchangeable. The L1 and -1 suffixes can change timing and power characteristics, while the C and I suffixes change temperature coverage. Check the design's timing closure, clock constraints, processor power settings, thermal budget, and industrial-temperature requirements. When moving from XC7Z020 to XC7Z010, also confirm that the reduced logic and memory resources do not exceed the application's utilization targets.
কমপ্লায়েন্স তথ্য
The verified product information identifies an industrial temperature suffix and Zynq-7000 device class but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm the declarations for the exact MPN with AMD before making a compliance claim.