XC7Z030-L2FFG676I - Dual Cortex-A9 800MHz SoC FPGA | AMD
MPN: XC7Z030-L2FFG676I ✓ সক্রিয়XC7Z030-L2FFG676I সারাংশ
A system-on-chip, or SoC, integrates a microprocessor and programmable logic within one semiconductor package. The Zynq-7000 architecture places an ARM Cortex-A9 processing system alongside Kintex-7 FPGA fabric and dedicated I/O resources. Instead of using separate discrete processors and FPGAs, a design can implement control software in the ARM subsystem while accelerators, interfaces, and parallel logic operate independently in the programmable-logic section.
The device provides 125K FPGA logic cells and supports an 800 MHz processor operating point. Its 676-FCBGA package provides a large, high-density interconnect for programmable I/O, memory interfaces, high-speed transceivers, and processor peripherals. The industrial-oriented ordering code supports operation from -40°C to +100°C, while the CMOS device operates from a 0.95 V to 1.05 V core supply range. The target uses the -L2 speed designation and the FFG676 package configuration.
The architecture separates hard processor functionality from programmable fabric. ARM software controls the operating system, networking stack, drivers, and application logic, while FPGA fabric can implement deterministic datapaths, custom accelerators, protocol handling, or high-speed I/O. CoreSight support adds visibility for processor and system debugging, which is valuable during hardware bring-up, software integration, and production fault analysis.
Typical applications include industrial motor and motion controllers, machine-vision systems, industrial Ethernet equipment, embedded data acquisition, radar and signal-processing front ends, programmable network appliances, and test-and-measurement instruments. The combination of dual-core ARM processing and 125K logic cells allows hardware-specific functions to remain in fabric while operating-system workloads execute in the processor subsystem.
PCB implementation requires careful allocation of power, ground, clocking, and high-speed I/O resources. Follow the manufacturer package pinout, power-decoupling recommendations, and PCB design guidance exactly. Preserve the distinction between the -L2, -1, -2, and -3 speed designations during tool selection, timing analysis, and production configuration.
This product page combines device specifications, compatible same-package options, application guidance, and design-oriented comparison information. It is intended to help engineers select the correct Zynq-7000 device and verify package, temperature, speed, and software-tool implications before committing to a board design.
এর জন্য ড্রপ-ইন বিকল্প XC7Z030-L2FFG676I — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible XC7Z030-L2FFG676I (একই form factor এবং footprint) — পার্থক্য রয়েছে Device Type, Mounting Type, Speed Grade, Package Dimensions, FPGA Family.
XC7Z030-2FFG676I
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC7Z030-1FFG676I
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC7Z030-L1FFG676I
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC7Z030-3FFG676E
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC7Z030-L2FFG676I সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | Zynq-7000 Kintex-7 system-on-chip |
| Processor Cores | 2 ARM Cortex-A9 cores |
| Processor Maximum Frequency | 800 MHz |
| FPGA Logic Cells | 125K logic cells |
| Architecture | Dual-core ARM Cortex-A9 MPCore with programmable Kintex-7 FPGA logic |
| Debug Support | CoreSight |
| প্যাকেজ | 676-terminal FCBGA |
| Package Dimensions | 27 mm x 27 mm |
| Core Supply Voltage Range | 0.95 V to 1.05 V |
| Process Technology | CMOS |
| অপারেটিং তাপমাত্রার পরিসর | -40°C to +100°C |
| মাউন্টিং টাইপ | Surface mount |
| Speed Grade | -L2 |
| FPGA Type | Kintex-7 programmable logic |
| Processor Architecture | ARMv7 |
| RoHS স্ট্যাটাস | Compliant |
| Number of Package Terminals | 676 terminals |
XC7Z030-L2FFG676I 676 terminals পিন কনফিগারেশন গাইড
XC7Z030-L2FFG676I (676 terminals প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি XC7Z030-L2FFG676I.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
XC7Z030-L2FFG676I এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Machine Vision, Industrial Ethernet Control, Programmable Logic Controller, High-Speed Data Acquisition, Embedded Communications Gateway, Test and Measurement Instrument.
Industrial Machine Vision
The XC7Z030-L2FFG676I fits machine-vision controllers because its dual ARM Cortex-A9 cores can run camera control, networking, and user software while 125K FPGA logic cells implement parallel image acquisition and filtering. The 676-terminal FCBGA exposes the dense I/O required by camera interfaces, image sensors, storage devices, and communication links. Designers can place latency-sensitive pixel processing in programmable fabric and leave operating-system tasks on the ARM subsystem, reducing the need for separate FPGA and processor packages. Temperature, voltage, and timing requirements should be checked against the exact AMD device tables before production release.
সুপারিশকৃত
Industrial Ethernet Control
The XC7Z030-L2FFG676I is well suited to industrial Ethernet equipment requiring both deterministic hardware handling and a Linux-capable control environment. ARM cores can manage protocols, management interfaces, and networking software, while FPGA fabric can accelerate packet classification, buffering, or interface conversion. With 125K logic cells and a 676-terminal FCBGA package, the device consolidates substantial programmable resources and external connectivity into one component. Validate the selected board configuration against the device's supported peripheral set, and implement the manufacturer clocking and power-sequencing requirements for reliable industrial operation.
সুপারিশকৃত
Programmable Logic Controller
A programmable logic controller built around the XC7Z030-L2FFG676I can use the ARM Cortex-A9 subsystem for sequencing, diagnostics, and communications while FPGA fabric handles high-speed inputs, precise timing, or custom control loops. The -40°C to +100°C operating range supports temperature-controlled industrial environments, and the 125K logic-cell capacity provides room for parallel control channels. The large FCBGA footprint also permits direct connection to memory and industrial fieldbus circuitry. Board-level validation should include thermal analysis, power-integrity checks, and timing closure using the exact -L2 device target.
সুপারিশকৃত
High-Speed Data Acquisition
The XC7Z030-L2FFG676I can serve as the control and processing core of a high-speed data-acquisition system. Its FPGA fabric can implement parallel ADC capture logic, digital filtering, triggering, and data packing, while the dual ARM cores configure devices and transfer results. The 676-terminal FCBGA supports dense connections to converters, memory, and high-speed peripherals, while the -L2 grade supports timing-focused implementation. Exact transceiver and interface counts must be checked for the selected configuration, and all analog input layouts should follow separate high-speed signal-integrity and grounding practices.
সুপারিশকৃত
Embedded Communications Gateway
The XC7Z030-L2FFG676I supports embedded communications gateways that combine protocol processing with programmable hardware acceleration. ARM software can manage routing, configuration, security services, and device management, while FPGA logic can accelerate packet handling or terminate time-critical interfaces. Its 125K logic cells provide meaningful parallel-processing capacity without requiring a separate high-end FPGA, and the 676-terminal package supports broad external connectivity. Designers should reserve configuration storage, clock sources, and differential I/O resources according to the manufacturer package guidelines, then validate signal integrity across every enabled high-speed interface.
সুপারিশকৃত
Test and Measurement Instrument
The XC7Z030-L2FFG676I is useful in test-and-measurement equipment because the programmable-logic section can implement precision acquisition, pattern generation, or signal processing while the ARM subsystem provides an embedded control interface. The dual-core processor supports an operating system or real-time control environment, and 125K logic cells allow substantial custom instrumentation logic on one device. The high-pin-count FCBGA package makes power distribution and high-speed layout critical, so designers should follow AMD's layer-stack, decoupling, and via-transition guidance. Final timing and temperature margins should be verified with production constraints in the selected Vivado target.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা XC7Z030-L2FFG676I — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | XC7Z030-2FFG676I | XC7Z030-1FFG676I | XC7Z030-L1FFG676I | XC7Z030-3FFG676E |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 676-FCBGA (27x27) | 676-FCBGA (27x27) | 676-FCBGA (27x27) | 676-FCBGA (27x27) | 676-FCBGA (27x27) |
| FPGA Logic Cells | 125K logic cells | 125K logic cells | 125K logic cells | 125K logic cells | 125K logic cells |
| Processor Cores | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore |
| Speed Designation | -L2 | -2 | -1 | -L1 | -3 |
| Architecture | Zynq-7000 Kintex-7 SoC | Zynq-7000 Kintex-7 SoC | Zynq-7000 Kintex-7 SoC | Zynq-7000 Kintex-7 SoC | Zynq-7000 Kintex-7 SoC |
| Debug Support | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
মূল পার্থক্যসমূহ
- Provides the -L2 timing designation within the XC7Z030 family (বনামXC7Z030-1FFG676I)
- Combines dual-core ARM processing with a substantial FPGA fabric (বনামXC7Z030-3FFG676E)
- Supports an extended industrial temperature listing (বনামXC7Z030-2FFG676I)
ডিজাইন নোট
Implement each supply rail using the voltage, sequencing, and decoupling requirements in the AMD Zynq-7000 data sheet. The XC7Z030-L2FFG676I core supply range is 0.95 V to 1.05 V, while configuration and I/O rails may have separate limits. Place high-frequency bypass capacitors directly beside their assigned BGA power terminals and use low-impedance power and ground planes to control simultaneous processor and fabric switching current.
The 676-FCBGA package requires a dense multilayer PCB with short power connections, symmetrical escape routing, and carefully controlled BGA via transitions. Follow the manufacturer package drawing for pad, solder-mask, paste, and land-pattern dimensions rather than deriving them from a generic BGA footprint. Validate drill-to-copper and assembly constraints with the selected fabricator because package density can create thermal and solder-volume concerns.
Estimate total dissipation from processor activity, FPGA utilization, I/O loading, and the operating ambient temperature rather than treating the 800 MHz rating as a continuous power target. The -40°C to +100°C rating defines allowable environmental conditions, not guaranteed junction-temperature margin. Use the package thermal model and PCB construction for heat-flow calculations, then verify the final design in hardware across processor, fabric, and I/O loading conditions.
Separate clock, high-speed serial, and sensitive analog interfaces according to their individual signal-integrity requirements. Route clocks over continuous reference planes with controlled return paths, and avoid routing switching-regulator or digital return currents beneath sensitive inputs. Configuration pins and dedicated resources must follow the exact pin table because changing speed or temperature suffixes does not make unrelated package functions interchangeable.
কমপ্লায়েন্স তথ্য
RoHS status is identified for the related XC7Z030-2FFG676I family listing. Other compliance attributes are not established for the exact target and remain unknown.