AMD

XC7Z030-L2FFG676I - Dual Cortex-A9 800MHz SoC FPGA | AMD

MPN: XC7Z030-L2FFG676I ✓ Aktif
0.95 V to 1.05 V Vdss 676-terminal FCBGA Package 800 MHz Speed
MOQ: 1 |

XC7Z030-L2FFG676I Genel Bakış

The AMD XC7Z030-L2FFG676I is a Zynq-7000 Kintex-7 system-on-chip with 125K logic cells, a dual-core ARM Cortex-A9 processor operating up to 800 MHz, and a 676-terminal FCBGA package measuring 27 mm by 27 mm. It combines programmable logic, ARM processing, CoreSight debug, and programmable I/O in one device, making it suitable for embedded control, industrial automation, networking, image processing, and communications equipment.

A system-on-chip, or SoC, integrates a microprocessor and programmable logic within one semiconductor package. The Zynq-7000 architecture places an ARM Cortex-A9 processing system alongside Kintex-7 FPGA fabric and dedicated I/O resources. Instead of using separate discrete processors and FPGAs, a design can implement control software in the ARM subsystem while accelerators, interfaces, and parallel logic operate independently in the programmable-logic section.

The device provides 125K FPGA logic cells and supports an 800 MHz processor operating point. Its 676-FCBGA package provides a large, high-density interconnect for programmable I/O, memory interfaces, high-speed transceivers, and processor peripherals. The industrial-oriented ordering code supports operation from -40°C to +100°C, while the CMOS device operates from a 0.95 V to 1.05 V core supply range. The target uses the -L2 speed designation and the FFG676 package configuration.

The architecture separates hard processor functionality from programmable fabric. ARM software controls the operating system, networking stack, drivers, and application logic, while FPGA fabric can implement deterministic datapaths, custom accelerators, protocol handling, or high-speed I/O. CoreSight support adds visibility for processor and system debugging, which is valuable during hardware bring-up, software integration, and production fault analysis.

Typical applications include industrial motor and motion controllers, machine-vision systems, industrial Ethernet equipment, embedded data acquisition, radar and signal-processing front ends, programmable network appliances, and test-and-measurement instruments. The combination of dual-core ARM processing and 125K logic cells allows hardware-specific functions to remain in fabric while operating-system workloads execute in the processor subsystem.

PCB implementation requires careful allocation of power, ground, clocking, and high-speed I/O resources. Follow the manufacturer package pinout, power-decoupling recommendations, and PCB design guidance exactly. Preserve the distinction between the -L2, -1, -2, and -3 speed designations during tool selection, timing analysis, and production configuration.

This product page combines device specifications, compatible same-package options, application guidance, and design-oriented comparison information. It is intended to help engineers select the correct Zynq-7000 device and verify package, temperature, speed, and software-tool implications before committing to a board design.

Drop-in alternatifler için XC7Z030-L2FFG676I — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller XC7Z030-L2FFG676I (aynı form faktörü ve ayağa oturma) — farklı olan Device Type, Mounting Type, Speed Grade, Package Dimensions, FPGA Family.

AMD
Device Type: Zynq-7000 SoC with programmable logic and ARM processor
Speed Grade: -1 grade
Package Dimensions: 27 x 27 mm
İle Karşılaştır XC7Z030-L2FFG676I →
AMD
Mounting Type: Surface-mount BGA
Package Dimensions: 27 x 27 mm
FPGA Family: Kintex-7
İle Karşılaştır XC7Z030-L2FFG676I →
AMD
Device Type: Zynq-7000 Kintex-7 system-on-chip (SoC)
Mounting Type: Surface mount, ball grid array
Speed Grade: -3
İle Karşılaştır XC7Z030-L2FFG676I →
AMD
Device Type: Zynq-7000 programmable system on chip
FPGA Family: Kintex-7 FPGA
İle Karşılaştır XC7Z030-L2FFG676I →

XC7Z030-2FFG676I

✅ Yerleştirme
AMD
📦 676-FCBGA (27x27)
Zynq-7000 system-on-chip with dual-core Arm Cortex-A9 and Kintex-7 FPGA · Dual-core Arm Cortex-A9 MPCore · 800 MHz · 125K logic cells · Kintex-7 · Zynq-7000 · FPGA · CoreSight

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

XC7Z030-1FFG676I

✅ Yerleştirme
AMD
📦 676-FCBGA (27x27)
Zynq-7000 SoC with programmable logic and ARM processor · Dual ARM Cortex-A9 MPCore · 2 cores · 667 MHz · Kintex-7 FPGA · 125K logic cells · CoreSight · 676-FCBGA

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

XC7Z030-L1FFG676I

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 676-FCBGA (27x27)
Retains 125K logic cells and the FFG676 footprint; the -1 speed designation is one grade below the target -L2 designation.

📋 Katalogda Olmayan Referans Alternatifi

XC7Z030-3FFG676E

✅ Yerleştirme
AMD
📦 676-FCBGA (27x27)
Zynq-7000 Kintex-7 system-on-chip (SoC) · Dual ARM Cortex-A9 MPCore · 1 GHz · 125K logic cells · Kintex-7 · -3 · E extended-temperature designation · CoreSight

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

XC7Z030-L2FFG676I Maksimum Değerlendirmeler & Elektriksel Özellikler

Device Type Zynq-7000 Kintex-7 system-on-chip
Processor Cores 2 ARM Cortex-A9 cores
Processor Maximum Frequency 800 MHz
FPGA Logic Cells 125K logic cells
Architecture Dual-core ARM Cortex-A9 MPCore with programmable Kintex-7 FPGA logic
Debug Support CoreSight
Paket 676-terminal FCBGA
Package Dimensions 27 mm x 27 mm
Core Supply Voltage Range 0.95 V to 1.05 V
Process Technology CMOS
İşletim Sıcaklığı Aralığı -40°C to +100°C
Montaj Türü Surface mount
Speed Grade -L2
FPGA Type Kintex-7 programmable logic
Processor Architecture ARMv7
RoHS Durumu Compliant
Number of Package Terminals 676 terminals

XC7Z030-L2FFG676I 676 terminals Pin Yapısı Kılavuzu

XC7Z030-L2FFG676I (676 terminals paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

676 terminals paket pin çizelgesi için XC7Z030-L2FFG676I

Ayrıntılı pin çıkış verisi mevcut değil: XC7Z030-L2FFG676I.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

XC7Z030-L2FFG676I için uygundur 6 uygulamas: Industrial Machine Vision, Industrial Ethernet Control, Programmable Logic Controller, High-Speed Data Acquisition, Embedded Communications Gateway, Test and Measurement Instrument.

📺

Industrial Machine Vision

The XC7Z030-L2FFG676I fits machine-vision controllers because its dual ARM Cortex-A9 cores can run camera control, networking, and user software while 125K FPGA logic cells implement parallel image acquisition and filtering. The 676-terminal FCBGA exposes the dense I/O required by camera interfaces, image sensors, storage devices, and communication links. Designers can place latency-sensitive pixel processing in programmable fabric and leave operating-system tasks on the ARM subsystem, reducing the need for separate FPGA and processor packages. Temperature, voltage, and timing requirements should be checked against the exact AMD device tables before production release.

🌐

Industrial Ethernet Control

The XC7Z030-L2FFG676I is well suited to industrial Ethernet equipment requiring both deterministic hardware handling and a Linux-capable control environment. ARM cores can manage protocols, management interfaces, and networking software, while FPGA fabric can accelerate packet classification, buffering, or interface conversion. With 125K logic cells and a 676-terminal FCBGA package, the device consolidates substantial programmable resources and external connectivity into one component. Validate the selected board configuration against the device's supported peripheral set, and implement the manufacturer clocking and power-sequencing requirements for reliable industrial operation.

🏭

Programmable Logic Controller

A programmable logic controller built around the XC7Z030-L2FFG676I can use the ARM Cortex-A9 subsystem for sequencing, diagnostics, and communications while FPGA fabric handles high-speed inputs, precise timing, or custom control loops. The -40°C to +100°C operating range supports temperature-controlled industrial environments, and the 125K logic-cell capacity provides room for parallel control channels. The large FCBGA footprint also permits direct connection to memory and industrial fieldbus circuitry. Board-level validation should include thermal analysis, power-integrity checks, and timing closure using the exact -L2 device target.

🖥️

High-Speed Data Acquisition

The XC7Z030-L2FFG676I can serve as the control and processing core of a high-speed data-acquisition system. Its FPGA fabric can implement parallel ADC capture logic, digital filtering, triggering, and data packing, while the dual ARM cores configure devices and transfer results. The 676-terminal FCBGA supports dense connections to converters, memory, and high-speed peripherals, while the -L2 grade supports timing-focused implementation. Exact transceiver and interface counts must be checked for the selected configuration, and all analog input layouts should follow separate high-speed signal-integrity and grounding practices.

📡

Embedded Communications Gateway

The XC7Z030-L2FFG676I supports embedded communications gateways that combine protocol processing with programmable hardware acceleration. ARM software can manage routing, configuration, security services, and device management, while FPGA logic can accelerate packet handling or terminate time-critical interfaces. Its 125K logic cells provide meaningful parallel-processing capacity without requiring a separate high-end FPGA, and the 676-terminal package supports broad external connectivity. Designers should reserve configuration storage, clock sources, and differential I/O resources according to the manufacturer package guidelines, then validate signal integrity across every enabled high-speed interface.

🔧

Test and Measurement Instrument

The XC7Z030-L2FFG676I is useful in test-and-measurement equipment because the programmable-logic section can implement precision acquisition, pattern generation, or signal processing while the ARM subsystem provides an embedded control interface. The dual-core processor supports an operating system or real-time control environment, and 125K logic cells allow substantial custom instrumentation logic on one device. The high-pin-count FCBGA package makes power distribution and high-speed layout critical, so designers should follow AMD's layer-stack, decoupling, and via-transition guidance. Final timing and temperature margins should be verified with production constraints in the selected Vivado target.

What is the AMD XC7Z030-L2FFG676I?
The AMD XC7Z030-L2FFG676I is a Zynq-7000 Kintex-7 system-on-chip combining a dual-core ARM Cortex-A9 processor with 125K FPGA logic cells in a 676-terminal FCBGA package. According to the AMD Zynq-7000 data sheet, the processor operates up to 800 MHz and the package measures 27 mm by 27 mm. It is designed for embedded systems that require deterministic programmable logic alongside a conventional ARM software environment.
What are the key specifications of XC7Z030-L2FFG676I?
The XC7Z030-L2FFG676I provides 125K logic cells, a dual-core ARM Cortex-A9 processor, an 800 MHz maximum processor frequency, CoreSight debug support, and a 676-terminal FCBGA package. The listed operating-temperature range is -40°C to +100°C, and the core supply range is 0.95 V to 1.05 V. These specifications place it in AMD's Zynq-7000 Kintex-7 product family for industrial embedded processing and programmable-logic applications.
Where can I download the XC7Z030-L2FFG676I datasheet?
The XC7Z030-L2FFG676I datasheet is available through AMD's Zynq-7000 SoC documentation page at https://docs.amd.com/v/u/en-US/ds191-XC7Z030-XC7Z045-data-sheet. The document covers the XC7Z030 and related Zynq-7000 devices, including package, electrical, processor, and programmable-logic information. Use the package pin table and design guidance in that document when assigning the 676-terminal FCBGA connections.
Where can I find the XC7Z030-L2FFG676I pinout?
The XC7Z030-L2FFG676I pinout is found in the package-pin tables of the AMD Zynq-7000 data sheet. The device uses a 676-terminal FCBGA package, so its connection list is considerably larger than a leaded-package pinout. Assign every power, ground, clock, configuration, processor, and programmable-I/O terminal according to the manufacturer tables; do not infer BGA connectivity from a similar device with a different package suffix.
Is XC7Z030-L2FFG676I suitable for industrial applications?
The XC7Z030-L2FFG676I is suitable for industrial applications requiring an extended -40°C to +100°C operating range. Its dual-core ARM Cortex-A9 subsystem can run operating systems and control software, while 125K FPGA logic cells can handle deterministic data paths, custom I/O, and hardware accelerators. The 676-FCBGA package also supports the high pin count needed by memory, communications, and high-speed peripheral interfaces.
What can replace XC7Z030-L2FFG676I?
The closest same-package replacement is XC7Z030-2FFG676I because it retains the 125K logic-cell configuration, 800 MHz processor description, 676-FCBGA package, and -2 speed family. Other FFG676 speed-grade options can occupy the same footprint, but their timing, temperature, qualification, and tool implications must be reviewed before substitution. A footprint match alone does not guarantee identical operating limits or timing performance.
Is XC7Z030-L2FFG676I the same as XC7Z030-2FFG676I?
The XC7Z030-L2FFG676I and XC7Z030-2FFG676I share the XC7Z030 device, 125K logic cells, 800 MHz processor description, and 676-terminal FCBGA package. Their ordering-code speed and temperature details must still be checked against the AMD device tables for the exact production configuration. Engineers should compare the complete part number, selected Vivado device settings, timing grade, and operating-temperature requirements before treating them as interchangeable.
XC7Z030-L2FFG676I vs XC7Z030-1FFG676I: which should I choose?
Choose XC7Z030-L2FFG676I when the design depends on the -L2 speed designation; choose XC7Z030-1FFG676I when the -1 timing grade is sufficient. Both retain the XC7Z030 Zynq architecture, 125K logic cells, 800 MHz maximum processor description, and 676-terminal FCBGA package. The deciding factors are implemented timing margin, applicable operating-temperature limits, qualification requirements, and the Vivado target part selected for the production build.
When should I choose XC7Z030-L2FFG676I over a lower-speed XC7Z030 option?
Choose XC7Z030-L2FFG676I when the design uses the -L2 timing profile or requires a deterministic fabric path that would not close reliably under a lower speed grade. The device retains 125K logic cells and the 676-terminal FCBGA footprint, so it can serve as the final configuration for an industrial embedded platform. Use a lower-speed XC7Z030 variant only after confirming timing closure, temperature suitability, and tool compatibility.
Is XC7Z030-L2FFG676I suitable for image-processing and communications systems?
The XC7Z030-L2FFG676I is suitable for image processing and communications systems because it combines a dual-core ARM Cortex-A9 processor with 125K programmable logic cells. ARM software can manage control functions, networking, and configuration, while FPGA fabric can execute parallel pixel pipelines, packet processing, or custom accelerator logic. The 676-terminal package supports dense I/O, although exact transceiver availability and interface counts depend on the device configuration.
How should power and decoupling be designed for XC7Z030-L2FFG676I?
Power the XC7Z030-L2FFG676I according to the separate supply rails, voltage requirements, sequencing rules, and decoupling recommendations in the AMD data sheet. The device operates from a 0.95 V to 1.05 V core supply range, but auxiliary I/O and configuration rails may use different voltages. Place the required high-frequency bypass capacitors close to their assigned package power terminals and provide low-impedance planes for both power and ground.
What is the price of XC7Z030-L2FFG676I?
The current commercial price for XC7Z030-L2FFG676I is not published in a qualifying quantity-break table on this page. Use the Request a Quote form on this page for the current unit pricing, order quantity, and supply conditions. The request should include your required quantity, date code, target packaging, and any temperature or automotive sourcing requirements.
Where can I buy XC7Z030-L2FFG676I online?
Use the Request a Quote form on this page to request XC7Z030-L2FFG676I pricing, stock confirmation, and lead time from XAIPART. For a high-pin-count FPGA, include the required reel quantity, assembly packaging, date-code preference, and whether the design requires traceability documentation. This provides the information needed to quote the exact 676-terminal FCBGA ordering code without confusing it with another XC7Z030 package or speed grade.
What is the lead time and stock status of XC7Z030-L2FFG676I?
Current stock and lead time for XC7Z030-L2FFG676I should be confirmed through the Request a Quote form on this page. Submit the required quantity and indicate whether factory allocation, date-code control, or extended-temperature documentation is necessary. Because the product is a large BGA device with multiple ordering-code fields, a quote based on the complete MPN helps prevent mismatched speed, temperature, or package assumptions.
What tools and design files are used with XC7Z030-L2FFG676I?
The XC7Z030-L2FFG676I is implemented with AMD's FPGA design flow, including Vivado for synthesis, implementation, timing analysis, and bitstream generation. The selected device part should match the exact -L2FFG676I ordering code. Hardware engineers must also apply the AMD package pinout, PCB design guidance, power sequencing, and clocking requirements rather than relying only on the logical block design.

Mühendislik referans verileri: XC7Z030-L2FFG676I — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Select the XC7Z030-L2FFG676I when an industrial embedded system needs 125K FPGA logic cells, a dual-core ARM Cortex-A9 processor, and a 676-terminal FCBGA package while using the -L2 timing designation. XC7Z030-2FFG676I is the closest listed option with the same 125K logic-cell and 800 MHz product description, but engineers must verify its exact temperature, qualification, and ordering-code requirements. XC7Z030-1FFG676I can be considered when the lower -1 timing grade meets the design; it preserves the package and logic-cell count. XC7Z030-L1FFG676I similarly retains the footprint while using a lower speed designation. XC7Z030-3FFG676E uses a different speed and temperature suffix combination. For any substitution, verify the AMD device table, Vivado target, timing margin, operating temperature, PCB footprint, and production configuration rather than relying on package appearance alone.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün XC7Z030-2FFG676I XC7Z030-1FFG676I XC7Z030-L1FFG676I XC7Z030-3FFG676E
Brand AMD AMD AMD AMD AMD
Package 676-FCBGA (27x27) 676-FCBGA (27x27) 676-FCBGA (27x27) 676-FCBGA (27x27) 676-FCBGA (27x27)
FPGA Logic Cells 125K logic cells 125K logic cells 125K logic cells 125K logic cells 125K logic cells
Processor Cores Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore
Speed Designation -L2 -2 -1 -L1 -3
Architecture Zynq-7000 Kintex-7 SoC Zynq-7000 Kintex-7 SoC Zynq-7000 Kintex-7 SoC Zynq-7000 Kintex-7 SoC Zynq-7000 Kintex-7 SoC
Debug Support CoreSight CoreSight CoreSight CoreSight CoreSight

Ana Farklılayıcılar

  • Provides the -L2 timing designation within the XC7Z030 family (karşılaştırma:XC7Z030-1FFG676I)
  • Combines dual-core ARM processing with a substantial FPGA fabric (karşılaştırma:XC7Z030-3FFG676E)
  • Supports an extended industrial temperature listing (karşılaştırma:XC7Z030-2FFG676I)

Tasarım Notları

Implement each supply rail using the voltage, sequencing, and decoupling requirements in the AMD Zynq-7000 data sheet. The XC7Z030-L2FFG676I core supply range is 0.95 V to 1.05 V, while configuration and I/O rails may have separate limits. Place high-frequency bypass capacitors directly beside their assigned BGA power terminals and use low-impedance power and ground planes to control simultaneous processor and fabric switching current.

The 676-FCBGA package requires a dense multilayer PCB with short power connections, symmetrical escape routing, and carefully controlled BGA via transitions. Follow the manufacturer package drawing for pad, solder-mask, paste, and land-pattern dimensions rather than deriving them from a generic BGA footprint. Validate drill-to-copper and assembly constraints with the selected fabricator because package density can create thermal and solder-volume concerns.

Estimate total dissipation from processor activity, FPGA utilization, I/O loading, and the operating ambient temperature rather than treating the 800 MHz rating as a continuous power target. The -40°C to +100°C rating defines allowable environmental conditions, not guaranteed junction-temperature margin. Use the package thermal model and PCB construction for heat-flow calculations, then verify the final design in hardware across processor, fabric, and I/O loading conditions.

Separate clock, high-speed serial, and sensitive analog interfaces according to their individual signal-integrity requirements. Route clocks over continuous reference planes with controlled return paths, and avoid routing switching-regulator or digital return currents beneath sensitive inputs. Configuration pins and dedicated resources must follow the exact pin table because changing speed or temperature suffixes does not make unrelated package functions interchangeable.

Uyumluluk Bilgisi

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

RoHS status is identified for the related XC7Z030-2FFG676I family listing. Other compliance attributes are not established for the exact target and remain unknown.

Veri doğrulanma tarihi: 2026-11-18 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

xc7z030 2ffg676i xc7z030 1ffg676i xc7z030 1fbg676i xc7z030 2fbg676i xc7z030 3ffg676e XC7Z030-L2FFG676I datasheet XC7Z030-L2FFG676I datasheet pdf XC7Z030-L2FFG676I pinout XC7Z030-L2FFG676I equivalent XC7Z030-L2FFG676I replacement XC7Z030-L2FFG676I vs XC7Z030-2FFG676I XC7Z030-L2FFG676I FFG676 footprint XC7Z030-L2FFG676I price AMD XC7Z030-L2FFG676I

İlgili Bileşenler ve Terimler

AMD XC7Z030-L2FFG676I XC7Z030-2FFG676I XC7Z030-1FFG676I XC7Z030-L1FFG676I XC7Z030-3FFG676E Zynq-7000 Kintex-7 system-on-chip FPGA CPLD ARM Cortex-A9 MPCore CoreSight 125K logic cells 800 MHz processor 676-FCBGA FCBGA-676 surface-mount package programmable logic industrial automation machine vision industrial Ethernet 0.95 V to 1.05 V core supply -40°C to +100°C
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle