AMD

XC9536XL-10VQ44I - 36-Macrocell 3.3V CPLD | AMD

MPN: XC9536XL-10VQ44I ✓ সক্রিয়
3 V Vdss 44-pin VQFP surface-mount package Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

XC9536XL-10VQ44I সারাংশ

The AMD XC9536XL-10VQ44I is a 3.3 V in-system programmable complex programmable logic device with 36 macrocells, 800 usable gates, and 34 user I/O pins. Its maximum propagation delay is 10 ns, and it is packaged in a surface-mount 44-pin VQFP measuring 10 mm by 10 mm. The industrial-temperature designation supports operation from -40°C to 85°C.

A CPLD, or complex programmable logic device, is a user-programmable semiconductor that combines multiple programmable logic blocks with a nonvolatile configuration architecture. Within the FPGA and CPLD hierarchy, it occupies the position between fixed-function logic and larger field-programmable gate arrays. The XC9500XL family is intended for compact control logic, interface adaptation, bus decoding, state-machine implementation, and glue logic where deterministic I/O behavior and in-system programming are important.

The XC9536XL combines 36 macrocells with 34 user I/O pins in a 44-terminal package. Its 800 usable gates provide more capacity than small legacy PAL and GAL devices, while the 10 ns maximum propagation delay supports moderately high-speed control paths. In-system programmability allows the configuration to be updated without removing the device from the circuit, which simplifies production programming, field upgrades, and prototype-to-production transitions.

The device uses two 54V18 function blocks and supports a 3 V to 3.6 V operating supply range with a nominal 3.3 V operating point. A -10 speed designation identifies the maximum propagation-delay grade, making the device appropriate for general-purpose logic where 10 ns class timing is sufficient. Pin assignments combine programmable user I/O with dedicated power, ground, configuration, and programming functions required by the device architecture.

Typical uses include industrial control panels, communication-interface logic, peripheral emulation, automated test equipment, embedded system glue logic, and legacy design refreshes. The 44-pin VQFP is especially useful where a moderate number of I/O pins is needed without moving to a larger leaded package. Its industrial temperature range also suits factory automation and other temperature-controlled commercial equipment.

PCB design should preserve the manufacturer-defined power, ground, and configuration connections while assigning user I/O according to the pin description table. Place decoupling capacitors close to the supply pins and keep programming or configuration traces away from sensitive logic paths. Validate timing with the actual external pull-up, pull-down, and load conditions because board-level capacitance can affect edge rates and system behavior.

This page combines the device specifications, application guidance, package constraints, and engineering comparison information needed to plan an XC9500XL design. It also identifies same-footprint speed and temperature options while keeping package changes and redesign requirements outside the drop-in replacement set.

এর জন্য ড্রপ-ইন বিকল্প XC9536XL-10VQ44I — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible XC9536XL-10VQ44I (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, RoHS Status, Mounting Type, Device Type, Maximum Propagation Delay.

Altera
Package: 44-pin TQFP
RoHS Status: Non-Compliant (non-N suffix)
এর সাথে তুলনা করুন XC9536XL-10VQ44I →
AMD
Package: 44-pin VTQFP (VQ44)
RoHS Status: Non-compliant
Mounting Type: Surface mount, gull wing
এর সাথে তুলনা করুন XC9536XL-10VQ44I →
AMD
Package: 44-pin VQFP
Device Type: In-System Programmable CPLD
এর সাথে তুলনা করুন XC9536XL-10VQ44I →
Xilinx
Package: 44-pin VQFP, 10 mm × 10 mm
RoHS Status: RoHS non-compliant
Maximum Propagation Delay: 7.5 ns
এর সাথে তুলনা করুন XC9536XL-10VQ44I →

XC9536XL-10VQ44C

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
AMD
📦 VQFP-44 (10 mm x 10 mm)
In-System Programmable CPLD · XC9500XL · 36 macrocells · 800 gates · 10 ns · 34 I/O · 32 user I/O pins

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

XC9536XL-10VQG44I

✅ ড্রপ-ইন
📦 VQFP-44 (10 mm x 10 mm)
G-package designation retains the 36-macrocell, 34-I/O, 800-gate, and 10 ns ratings; core electrical differences are 0% and configuration compatibility must be confirmed.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

XC9536XL-10VQG44C

✅ ড্রপ-ইন
📦 VQFP-44 (10 mm x 10 mm)
Commercial-temperature G-package option has the same 10 ns speed grade, 36 macrocells, and 34 user I/O; timing differs by 0% from the target.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

XC9536XL-7VQ44C

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Xilinx
📦 VQFP-44 (10 mm x 10 mm)
Complex Programmable Logic Device (CPLD) · In-System Programmable · 10,000 cycles · 36 macrocells · 34 I/O pins · Approximately 800 gates · 54V18 function blocks · 7.5 ns

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

XC9536XL-7VQG44C

✅ ড্রপ-ইন
📦 VQFP-44 (10 mm x 10 mm)
Maximum propagation delay is 7 ns versus 10 ns, improving timing by 30%; capacity remains 36 macrocells and 34 user I/O.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

XC9536XL-5VQ44C

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
AMD
📦 VQFP-44 (10 mm x 10 mm)
Complex Programmable Logic Device (CPLD) · 36 macrocells · 2 x 36V18 function blocks · 800 gates · 5 ns · 3.3 V · 44-pin VQFP · Surface mount

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

XC9536XL-10VQ44I সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Device Type Complex programmable logic device (CPLD)
Product Family XC9500XL
Macrocell Count 36 macrocells
Usable Gates 800 gates
User I/O Count 34 I/O pins
Function Block Count 2 function blocks
Maximum Propagation Delay 10 ns
Minimum Operating Supply Voltage 3 V
Nominal Operating Supply Voltage 3.3 V
Maximum Operating Supply Voltage 3.6 V
Industrial Temperature Range -40°C to 85°C
Package Type 44-pin VQFP surface-mount package
Package Body Dimensions 10 mm x 10 mm
JEDEC Package Code S-PQFP-G44
Programming In-system programmable
মাউন্টিং টাইপ Surface mount
RoHS স্ট্যাটাস unknown
REACH Status unknown
Lead-Free Status unknown

XC9536XL-10VQ44I s-pqfp-g44 পিন কনফিগারেশন গাইড

XC9536XL-10VQ44I (s-pqfp-g44 প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

XC9536XL-10VQ44I-এর জন্য s-pqfp-g44 প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি XC9536XL-10VQ44I.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

XC9536XL-10VQ44I এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control Logic, Communication Interface Adaptation, Peripheral Emulation and Glue Logic, Automated Test Equipment, Programmable Timing and Interlocks, Legacy CPLD Design Refresh.

🏭

Industrial Control Logic

The XC9536XL-10VQ44I fits industrial control boards that require deterministic programmable logic close to sensors, actuators, and communication transceivers. Its 36 macrocells and 34 user I/O pins provide ample capacity for state machines, interlocks, signal conditioning, and bus decoding, while the 10 ns propagation-delay class supports moderate-speed control paths. The -40°C to 85°C industrial rating makes it appropriate for protected factory equipment. In-system programming also permits configuration during production or controlled field upgrades without removing the device from its socketed board position.

🌐

Communication Interface Adaptation

The XC9536XL-10VQ44I is useful for adapting legacy parallel interfaces to newer control electronics through programmable protocol conversion, byte-lane routing, and handshake logic. Thirty-four user I/O pins permit simultaneous connection to a host processor, level translator, and peripheral bus, while the 800 usable gates provide room for framing and error-control functions. The 3 V to 3.6 V operating range supports 3.3 V systems, and the 10 ns timing class is appropriate for many synchronous control interfaces when external bus timing is also reviewed.

🖥️

Peripheral Emulation and Glue Logic

The XC9536XL-10VQ44I consolidates legacy glue logic into one programmable CPLD, reducing discrete logic count and simplifying board revisions. Its 36 macrocells can implement address decoding, register control, interrupt arbitration, and command sequencing, while 34 user I/O pins provide practical fanout for peripheral buses. Because configuration is nonvolatile and the device supports in-system programming, production fixtures can load the final logic image directly on assembled boards. The 44-pin VQFP also offers a practical upgrade path from other 44-pin XC9500XL designs.

🔧

Automated Test Equipment

The XC9536XL-10VQ44I is well suited to automated test equipment that requires programmable sequencing, fixture control, and signal routing near the device-under-test interface. The CPLD can implement test-sequence state machines, pattern generators, and measurement-control logic while its 34 I/O pins support multiplexing and fixture control. A 10 ns propagation-delay class supports short control sequences when external instrumentation introduces the primary delay. The industrial temperature option is useful for production-floor systems, although test equipment developers should include cable, relay, and loading delays in timing analysis.

🏭

Programmable Timing and Interlocks

The XC9536XL-10VQ44I can implement configurable interlocks, timing windows, event counters, and safety-oriented control functions when its logical design has been reviewed for the intended system. Thirty-six macrocells and 34 user I/O pins allow multiple discrete timing channels to share one device, while the 10 ns class provides fast internal decision paths. The -40°C to 85°C rating supports industrial environments, but application-specific safety certification and redundancy requirements remain separate from the device's environmental rating. External output drivers and sensors must also be checked independently.

🔧

Legacy CPLD Design Refresh

The XC9536XL-10VQ44I supports modernization of equipment built around older, small-footprint CPLDs when the replacement must preserve a 44-pin PCB footprint. Engineers can consolidate discrete address decoders, timing circuits, and interface controllers into 36 macrocells, while 34 user I/O pins preserve broad connectivity. The 10 ns timing class may satisfy many legacy control paths, but the source schematic must be checked for pin-specific functions and configuration voltage. Firmware and test procedures should also be updated for the exact programming workflow and industrial ordering code.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

XC9536XL-10VQG44I Same-family industrial option for configuration compatibility review ব্যবহৃত হয়: Industrial Control Logic, Peripheral Emulation and Glue Logic, Programmable Timing and Interlocks XC9536XL-10VQ44C AMD ব্যবহৃত হয়: Industrial Control Logic, Peripheral Emulation and Glue Logic, Automated Test Equipment, Programmable Timing and Interlocks, Legacy CPLD Design Refresh XC9536XL-10VQG44C Same-footprint 3.3 V interface companion option ব্যবহৃত হয়: Communication Interface Adaptation XC9536XL-7VQ44C Xilinx ব্যবহৃত হয়: Communication Interface Adaptation, Legacy CPLD Design Refresh XC9536XL-7VQG44C Faster same-footprint option for shorter control paths ব্যবহৃত হয়: Automated Test Equipment
Where can I download the XC9536XL-10VQ44I datasheet PDF?
The XC9536XL-10VQ44I datasheet is available through the AMD/Xilinx documentation link listed on this page. According to the manufacturer documentation, the device belongs to the XC9500XL complex programmable logic device family and uses a 44-pin VQFP package. Use the manufacturer pin-description table when assigning power, configuration, programming, and user I/O functions because generic device descriptions do not provide a complete pin map.
Where can I find the XC9536XL-10VQ44I pinout?
The manufacturer XC9500XL documentation contains the authoritative pin descriptions for the XC9536XL-10VQ44I. The device combines 34 user I/O pins with dedicated power, ground, configuration, and programming terminals in a 44-pin VQFP. Use that table to assign board functions and preserve the required configuration connections; package position alone is not sufficient for final PCB routing.
What are the key specifications of XC9536XL-10VQ44I?
The XC9536XL-10VQ44I is a 3.3 V CPLD with 36 macrocells, 800 usable gates, 34 user I/O pins, and a 10 ns maximum propagation delay. According to the AMD/Xilinx family documentation, it operates from 3 V to 3.6 V, supports in-system programming, and comes in a 10 mm by 10 mm 44-pin VQFP. Its industrial temperature range extends from -40°C to 85°C.
What is the operating voltage of XC9536XL-10VQ44I?
The XC9536XL-10VQ44I operates from 3 V to 3.6 V, with 3.3 V as the nominal supply voltage. According to the AMD/Xilinx family documentation, the device is a low-voltage CPLD intended for 3.3 V systems. Board power design must account for the permitted supply range and provide close decoupling at the device supply pins.
What is the temperature range of XC9536XL-10VQ44I?
The XC9536XL-10VQ44I supports an industrial temperature range of -40°C to 85°C. According to the manufacturer device listing, the I suffix identifies the industrial temperature option. That range suits controlled factory equipment, industrial controllers, communications equipment, and test systems, but designers must evaluate board self-heating and enclosure temperature when sizing the thermal margin.
What applications are suitable for XC9536XL-10VQ44I?
The XC9536XL-10VQ44I fits compact control logic, peripheral interfacing, bus decoding, state-machine implementation, protocol adaptation, and production-programming applications. Its 36 macrocells, 34 user I/O pins, and 10 ns maximum propagation delay provide useful capacity for moderate-speed logic, while in-system programming supports field updates and automated configuration. The 44-pin VQFP also simplifies migration from other 44-pin XC9500XL designs.
Where can I buy XC9536XL-10VQ44I online?
Use the Request a Quote form on this page to request the AMD XC9536XL-10VQ44I by exact MPN. The form should include the required quantity, package preference, date code requirements, and destination country so current commercial availability can be confirmed for the exact industrial-temperature 44-pin VQFP device.
What is the price of XC9536XL-10VQ44I?
The current commercial price for the AMD XC9536XL-10VQ44I is established through the Request a Quote form on this page. Submit the required quantity and sourcing details, including any date-code or traceability requirements. The structured pricing panel on the product page is the place to review the current offer when quote-based purchasing is enabled.
What is the lead time for XC9536XL-10VQ44I?
Use the Request a Quote form on this page to request the current lead time and minimum order quantity for the XC9536XL-10VQ44I. Lead time can change with order volume, inventory position, package requirements, and traceability needs, so include the planned production quantity and required delivery date when requesting confirmation.
Is XC9536XL-10VQ44I in stock?
Current XAIPART stock for the AMD XC9536XL-10VQ44I should be confirmed through the Request a Quote form on this page. Request the exact MPN and quantity, and state whether an industrial-temperature, factory-sealed unit is required. This avoids relying on a general listing whose stock status may refer to a different package, grade, or production lot.
What is the difference between XC9536XL-10VQ44I and XC9536XL-10VQG44C?
The XC9536XL-10VQ44I is the industrial-temperature version, while the XC9536XL-10VQG44C is the commercial-temperature counterpart identified in the family documentation. Both retain the 36-macrocell CPLD architecture, 34 user I/O pins, 800 usable gates, 10 ns timing class, and 44-pin VQFP format. Choose the I-grade device when operation across -40°C to 85°C is required.
When should I choose XC9536XL-10VQ44I over XC9536XL-10VQ44C?
Choose the XC9536XL-10VQ44I when the design must operate from -40°C to 85°C. Its timing rating remains 10 ns and its package remains a 44-pin VQFP, so the main decision is temperature qualification rather than logic capacity. The XC9536XL-10VQ44C is appropriate when the commercial temperature range is sufficient and industrial environmental coverage is unnecessary.
Is XC9536XL-10VQ44I suitable for industrial control applications?
Yes, the XC9536XL-10VQ44I is suitable for many industrial control applications because it is specified for -40°C to 85°C and includes 34 user I/O pins for external interfaces. According to the manufacturer family documentation, it also provides in-system programming and a 10 ns maximum propagation delay. Validate the complete enclosure temperature, I/O levels, timing margin, and safety requirements at system level.
What is the best drop-in replacement for XC9536XL-10VQ44I?
The XC9536XL-10VQG44I is the closest same-footprint option because it retains the 44-pin VQFP format, 36 macrocells, 34 user I/O pins, 800 usable gates, and 10 ns timing class. The XC9536XL-10VQ44C is another same-package choice when industrial temperature coverage is unnecessary. Confirm configuration compatibility, pin assignments, and operating-temperature requirements before replacement.
What is the best cross-brand equivalent for XC9536XL-10VQ44I?
No cross-brand drop-in equivalent was confirmed for the XC9536XL-10VQ44I. The device has a device-specific 44-pin footprint, XC9500XL macrocell architecture, configuration interface, and programming workflow, so a similarly sized CPLD is not automatically interchangeable. For a same-brand replacement, evaluate the XC9536XL-10VQG44I or XC9536XL-10VQ44C only after checking the manufacturer pin table, configuration method, and timing requirements.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা XC9536XL-10VQ44I — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the XC9536XL-10VQ44I when a design requires a 44-pin XC9500XL CPLD with 36 macrocells, 34 user I/O pins, a 10 ns speed grade, and operation across -40°C to 85°C. Select the XC9536XL-10VQ44C when the same electrical footprint is needed but commercial-temperature operation is sufficient. Choose the XC9536XL-7VQ44C when tighter logic paths are required without moving to another package. The XC9536XL-10VQG44I and XC9536XL-10VQG44C are same-family options whose configuration and ordering requirements should be checked against the finished design. The XC9536XL-5VQ44C offers the fastest listed option but exceeds the target's timing by 50%, so validate every critical path. No cross-brand substitute should be selected solely because it has 44 pins; CPLD architecture, configuration, programming, and I/O behavior must also match.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য XC9536XL-10VQ44C XC9536XL-10VQG44I XC9536XL-10VQG44C XC9536XL-7VQ44C XC9536XL-7VQG44C
Package VQFP-44 (10 mm x 10 mm) VQFP-44 (10 mm x 10 mm) VQFP-44 (10 mm x 10 mm) VQFP-44 (10 mm x 10 mm) VQFP-44 (10 mm x 10 mm) VQFP-44 (10 mm x 10 mm)
Brand AMD AMD AMD AMD AMD AMD
Architecture XC9500XL CPLD XC9500XL CPLD XC9500XL CPLD XC9500XL CPLD XC9500XL CPLD XC9500XL CPLD
Macrocell Count 36 macrocells 36 macrocells 36 macrocells 36 macrocells 36 macrocells 36 macrocells
User I/O Count 34 I/O pins 34 I/O pins 34 I/O pins 34 I/O pins 34 I/O pins 34 I/O pins
Usable Gates 800 gates 800 gates 800 gates 800 gates 800 gates 800 gates
Maximum Propagation Delay 10 ns 10 ns 10 ns 10 ns 7 ns 7 ns
Operating Supply Voltage 3 V to 3.6 V 3 V to 3.6 V 3 V to 3.6 V 3 V to 3.6 V 3 V to 3.6 V 3 V to 3.6 V
Temperature Qualification Industrial: -40°C to 85°C Commercial temperature grade Industrial grade Commercial temperature grade Commercial temperature grade Commercial temperature grade

মূল পার্থক্যসমূহ

  • Industrial-temperature qualification (বনামXC9536XL-10VQ44C)
  • Faster timing option without changing logic capacity (বনামXC9536XL-7VQ44C)
  • Consistent in-system-programmable integration (বনামXC9536XL-10VQG44I)
  • Same-footprint path for timing-constrained upgrades (বনামXC9536XL-5VQ44C)

ডিজাইন নোট

Route the programmer or configuration source to the dedicated configuration terminals exactly as specified in the manufacturer pin-description table. Keep programming access available if the design requires field updates or production programming. Place the device's supply decoupling capacitor adjacent to the supply and ground pins, use a short ground return, and avoid routing configuration or high-current switching traces beneath the package.

Analyze every external I/O path with the actual driver strength, load capacitance, pull-up or pull-down value, and board topology. The device's 10 ns maximum propagation-delay rating describes internal logic timing, while external buffer delay and interconnect delay remain part of the end-to-end path. Use the manufacturer I/O characterization and timing tools when operating near a specification limit, especially on long connector or cable routes.

Do not treat the -10, -7, or -5 suffix as a voltage rating; it identifies the device speed grade. Likewise, confirm the final package dimensions and pin count rather than relying on the generic VQFP name. The XC9536XL architecture, configuration interface, and programming workflow are device-specific, so a similarly sized CPLD from another manufacturer should not be treated as a drop-in replacement without a complete mechanical, electrical, and software review.

For a thermal estimate, use P_D = (V_IN - V_O) times I_O plus the device's internal bias contribution, then compare the resulting junction-temperature rise with the board and enclosure thermal resistance. The XC9536XL-10VQ44I is specified from -40°C to 85°C, so verify both the ambient range and self-heating at the highest expected switching activity. Keep unused or lightly loaded I/O conditions within the manufacturer's recommended state.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The device is an industrial-temperature XC9500XL CPLD, but no specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status was identified.

ডেটা যাচাই করা হয়েছে: 2026-11-16 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

xc9536xl datasheet xc9536xl 10vqg44c xc9536xl 10vqg44i xc9536xl pinout xc9536xl 7vqg44c XC9536XL-10VQ44I datasheet XC9536XL-10VQ44I pinout XC9536XL-10VQ44I VQFP-44 XC9536XL-10VQ44I equivalent XC9536XL-10VQ44I replacement XC9536XL-10VQ44I vs XC9536XL-10VQ44C XC9536XL-10VQ44I price XC9536XL-10VQ44I stock AMD XC9536XL-10VQ44I

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

AMD Xilinx XC9536XL-10VQ44I XC9536XL-10VQ44C XC9536XL-10VQG44I XC9536XL-10VQG44C XC9536XL-7VQ44C XC9536XL-7VQG44C XC9536XL-5VQ44C XC9500XL CPLD complex programmable logic device FPGA in-system programmable logic macrocell 54V18 function block programmable logic 3.3 V logic 36 macrocells 34 user I/O pins 800 usable gates 10 ns propagation delay VQFP-44 surface mount industrial temperature range
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন