XC9536XL-10VQ44I - 36-Macrocell 3.3V CPLD | AMD
MPN: XC9536XL-10VQ44I ✓ فعالXC9536XL-10VQ44I جائزہ
A CPLD, or complex programmable logic device, is a user-programmable semiconductor that combines multiple programmable logic blocks with a nonvolatile configuration architecture. Within the FPGA and CPLD hierarchy, it occupies the position between fixed-function logic and larger field-programmable gate arrays. The XC9500XL family is intended for compact control logic, interface adaptation, bus decoding, state-machine implementation, and glue logic where deterministic I/O behavior and in-system programming are important.
The XC9536XL combines 36 macrocells with 34 user I/O pins in a 44-terminal package. Its 800 usable gates provide more capacity than small legacy PAL and GAL devices, while the 10 ns maximum propagation delay supports moderately high-speed control paths. In-system programmability allows the configuration to be updated without removing the device from the circuit, which simplifies production programming, field upgrades, and prototype-to-production transitions.
The device uses two 54V18 function blocks and supports a 3 V to 3.6 V operating supply range with a nominal 3.3 V operating point. A -10 speed designation identifies the maximum propagation-delay grade, making the device appropriate for general-purpose logic where 10 ns class timing is sufficient. Pin assignments combine programmable user I/O with dedicated power, ground, configuration, and programming functions required by the device architecture.
Typical uses include industrial control panels, communication-interface logic, peripheral emulation, automated test equipment, embedded system glue logic, and legacy design refreshes. The 44-pin VQFP is especially useful where a moderate number of I/O pins is needed without moving to a larger leaded package. Its industrial temperature range also suits factory automation and other temperature-controlled commercial equipment.
PCB design should preserve the manufacturer-defined power, ground, and configuration connections while assigning user I/O according to the pin description table. Place decoupling capacitors close to the supply pins and keep programming or configuration traces away from sensitive logic paths. Validate timing with the actual external pull-up, pull-down, and load conditions because board-level capacitance can affect edge rates and system behavior.
This page combines the device specifications, application guidance, package constraints, and engineering comparison information needed to plan an XC9500XL design. It also identifies same-footprint speed and temperature options while keeping package changes and redesign requirements outside the drop-in replacement set.
کے لیے ڈراپ اِن متبادل XC9536XL-10VQ44I — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں XC9536XL-10VQ44I (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, RoHS Status, Mounting Type, Device Type, Maximum Propagation Delay.
XC9536XL-10VQ44C
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC9536XL-10VQG44I
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC9536XL-10VQG44C
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC9536XL-7VQ44C
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC9536XL-7VQG44C
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
XC9536XL-5VQ44C
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →XC9536XL-10VQ44I زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | Complex programmable logic device (CPLD) |
| Product Family | XC9500XL |
| Macrocell Count | 36 macrocells |
| Usable Gates | 800 gates |
| User I/O Count | 34 I/O pins |
| Function Block Count | 2 function blocks |
| Maximum Propagation Delay | 10 ns |
| Minimum Operating Supply Voltage | 3 V |
| Nominal Operating Supply Voltage | 3.3 V |
| Maximum Operating Supply Voltage | 3.6 V |
| Industrial Temperature Range | -40°C to 85°C |
| Package Type | 44-pin VQFP surface-mount package |
| Package Body Dimensions | 10 mm x 10 mm |
| JEDEC Package Code | S-PQFP-G44 |
| Programming | In-system programmable |
| ماؤنٹنگ ٹائپ | Surface mount |
| RoHS اسٹیٹس | unknown |
| REACH Status | unknown |
| Lead-Free Status | unknown |
XC9536XL-10VQ44I s-pqfp-g44 پن کنفیگریشن گائیڈ
XC9536XL-10VQ44I (s-pqfp-g44 پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں XC9536XL-10VQ44I.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
XC9536XL-10VQ44I کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Control Logic, Communication Interface Adaptation, Peripheral Emulation and Glue Logic, Automated Test Equipment, Programmable Timing and Interlocks, Legacy CPLD Design Refresh.
Industrial Control Logic
The XC9536XL-10VQ44I fits industrial control boards that require deterministic programmable logic close to sensors, actuators, and communication transceivers. Its 36 macrocells and 34 user I/O pins provide ample capacity for state machines, interlocks, signal conditioning, and bus decoding, while the 10 ns propagation-delay class supports moderate-speed control paths. The -40°C to 85°C industrial rating makes it appropriate for protected factory equipment. In-system programming also permits configuration during production or controlled field upgrades without removing the device from its socketed board position.
تجویز کردہ
Communication Interface Adaptation
The XC9536XL-10VQ44I is useful for adapting legacy parallel interfaces to newer control electronics through programmable protocol conversion, byte-lane routing, and handshake logic. Thirty-four user I/O pins permit simultaneous connection to a host processor, level translator, and peripheral bus, while the 800 usable gates provide room for framing and error-control functions. The 3 V to 3.6 V operating range supports 3.3 V systems, and the 10 ns timing class is appropriate for many synchronous control interfaces when external bus timing is also reviewed.
تجویز کردہ
Peripheral Emulation and Glue Logic
The XC9536XL-10VQ44I consolidates legacy glue logic into one programmable CPLD, reducing discrete logic count and simplifying board revisions. Its 36 macrocells can implement address decoding, register control, interrupt arbitration, and command sequencing, while 34 user I/O pins provide practical fanout for peripheral buses. Because configuration is nonvolatile and the device supports in-system programming, production fixtures can load the final logic image directly on assembled boards. The 44-pin VQFP also offers a practical upgrade path from other 44-pin XC9500XL designs.
تجویز کردہ
Automated Test Equipment
The XC9536XL-10VQ44I is well suited to automated test equipment that requires programmable sequencing, fixture control, and signal routing near the device-under-test interface. The CPLD can implement test-sequence state machines, pattern generators, and measurement-control logic while its 34 I/O pins support multiplexing and fixture control. A 10 ns propagation-delay class supports short control sequences when external instrumentation introduces the primary delay. The industrial temperature option is useful for production-floor systems, although test equipment developers should include cable, relay, and loading delays in timing analysis.
تجویز کردہ
Programmable Timing and Interlocks
The XC9536XL-10VQ44I can implement configurable interlocks, timing windows, event counters, and safety-oriented control functions when its logical design has been reviewed for the intended system. Thirty-six macrocells and 34 user I/O pins allow multiple discrete timing channels to share one device, while the 10 ns class provides fast internal decision paths. The -40°C to 85°C rating supports industrial environments, but application-specific safety certification and redundancy requirements remain separate from the device's environmental rating. External output drivers and sensors must also be checked independently.
تجویز کردہ
Legacy CPLD Design Refresh
The XC9536XL-10VQ44I supports modernization of equipment built around older, small-footprint CPLDs when the replacement must preserve a 44-pin PCB footprint. Engineers can consolidate discrete address decoders, timing circuits, and interface controllers into 36 macrocells, while 34 user I/O pins preserve broad connectivity. The 10 ns timing class may satisfy many legacy control paths, but the source schematic must be checked for pin-specific functions and configuration voltage. Firmware and test procedures should also be updated for the exact programming workflow and industrial ordering code.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا XC9536XL-10VQ44I — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | XC9536XL-10VQ44C | XC9536XL-10VQG44I | XC9536XL-10VQG44C | XC9536XL-7VQ44C | XC9536XL-7VQG44C |
|---|---|---|---|---|---|---|
| Package | VQFP-44 (10 mm x 10 mm) | VQFP-44 (10 mm x 10 mm) | VQFP-44 (10 mm x 10 mm) | VQFP-44 (10 mm x 10 mm) | VQFP-44 (10 mm x 10 mm) | VQFP-44 (10 mm x 10 mm) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Architecture | XC9500XL CPLD | XC9500XL CPLD | XC9500XL CPLD | XC9500XL CPLD | XC9500XL CPLD | XC9500XL CPLD |
| Macrocell Count | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells |
| User I/O Count | 34 I/O pins | 34 I/O pins | 34 I/O pins | 34 I/O pins | 34 I/O pins | 34 I/O pins |
| Usable Gates | 800 gates | 800 gates | 800 gates | 800 gates | 800 gates | 800 gates |
| Maximum Propagation Delay | 10 ns | 10 ns | 10 ns | 10 ns | 7 ns | 7 ns |
| Operating Supply Voltage | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V |
| Temperature Qualification | Industrial: -40°C to 85°C | Commercial temperature grade | Industrial grade | Commercial temperature grade | Commercial temperature grade | Commercial temperature grade |
اہم امتیازی خصوصیات
- Industrial-temperature qualification (بمقابلہXC9536XL-10VQ44C)
- Faster timing option without changing logic capacity (بمقابلہXC9536XL-7VQ44C)
- Consistent in-system-programmable integration (بمقابلہXC9536XL-10VQG44I)
- Same-footprint path for timing-constrained upgrades (بمقابلہXC9536XL-5VQ44C)
ڈیزائن نوٹس
Route the programmer or configuration source to the dedicated configuration terminals exactly as specified in the manufacturer pin-description table. Keep programming access available if the design requires field updates or production programming. Place the device's supply decoupling capacitor adjacent to the supply and ground pins, use a short ground return, and avoid routing configuration or high-current switching traces beneath the package.
Analyze every external I/O path with the actual driver strength, load capacitance, pull-up or pull-down value, and board topology. The device's 10 ns maximum propagation-delay rating describes internal logic timing, while external buffer delay and interconnect delay remain part of the end-to-end path. Use the manufacturer I/O characterization and timing tools when operating near a specification limit, especially on long connector or cable routes.
Do not treat the -10, -7, or -5 suffix as a voltage rating; it identifies the device speed grade. Likewise, confirm the final package dimensions and pin count rather than relying on the generic VQFP name. The XC9536XL architecture, configuration interface, and programming workflow are device-specific, so a similarly sized CPLD from another manufacturer should not be treated as a drop-in replacement without a complete mechanical, electrical, and software review.
For a thermal estimate, use P_D = (V_IN - V_O) times I_O plus the device's internal bias contribution, then compare the resulting junction-temperature rise with the board and enclosure thermal resistance. The XC9536XL-10VQ44I is specified from -40°C to 85°C, so verify both the ambient range and self-heating at the highest expected switching activity. Keep unused or lightly loaded I/O conditions within the manufacturer's recommended state.
تعمیل کی معلومات
The device is an industrial-temperature XC9500XL CPLD, but no specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status was identified.