XC9536XL-5CS48C - 36-Macrocell 5 ns CPLD | AMD
MPN: XC9536XL-5CS48C ✗ জীবনকালের সমাপ্তিXC9536XL-5CS48C সারাংশ
A complex programmable logic device, or CPLD, belongs to the programmable-logic hierarchy alongside FPGAs. Unlike a microcontroller that executes software instructions, a CPLD implements digital logic directly in a nonvolatile macrocell and interconnect architecture. This gives predictable propagation behavior, retained configuration between power cycles, and straightforward reprogramming. The XC9536XL combines 36 macrocells with 36 available I/O resources in a surface-mount 48-ball package.
Key characteristics include a 5 ns nominal propagation delay, 800 usable gates, and a 3.3 V operating supply. The 36 macrocells can implement combinational and registered logic for bus control, address decoding, interface translation, state machines, and peripheral interconnection. In-system programming supports configuration updates without removing the device from the assembled circuit, while the stated minimum of 10,000 program and erase cycles supports applications requiring repeated configuration changes during development or field servicing.
The XC9500 architecture uses CMOS programmable logic and a compact macrocell structure intended for moderate-complexity glue logic. With 36 I/O pins, the device provides substantial board-level connectivity without moving to a larger programmable-logic device. Designers should still budget timing margin for the selected 5 ns speed grade and account for package-routing and external-circuit delays when defining system timing requirements.
Typical uses include peripheral interface expansion, data-format conversion, control-signal multiplexing, memory-interface decoding, instrumentation control, and industrial control panels. The 48-ball CSBGA package also supports compact designs where connector and component density matter, although BGA assembly requires appropriate PCB land patterns, inspection, and assembly capability.
PCB implementation requires careful ball assignment, short supply connections, solid ground-plane continuity, and signal-routing discipline. Configuration pins and programming interface signals should be routed according to the manufacturer pin-description table, while exposed thermal and power-distribution requirements should be followed for the exact CSBGA land pattern. Prototype assembly should also account for the difficulty of inspecting or rework beneath a BGA package.
This product page consolidates the XC9536XL-5CS48C electrical characteristics, programmable-logic capabilities, compatible family options, and practical implementation guidance. It supports faster part selection by distinguishing speed-grade changes, package constraints, programming requirements, and the practical trade-offs involved in replacing a compact 36-macrocell CPLD.
এর জন্য ড্রপ-ইন বিকল্প XC9536XL-5CS48C — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible XC9536XL-5CS48C (একই form factor এবং footprint) — পার্থক্য রয়েছে Device Type, Terminal Type, Mounting Style, Package Form, RoHS Status.
XC9536XL-5CSG48C
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC9536XL-7CS48C
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XC9536XL-10CSG48C
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC9536XL-15CSG48C
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC9536XL-10CS48C
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
XC9536XL-5CS48C সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | Complex Programmable Logic Device (CPLD) |
| Architecture | XC9500 high-performance CPLD architecture |
| Number of Macrocells | 36 macrocells |
| Number of I/O Pins | 36 I/O pins |
| Usable Gates | 800 gates |
| Nominal Propagation Delay | 5 ns |
| সাপ্লাই ভোল্টেজ | 3.3 V |
| Programming Type | In-system programmable |
| Program and Erase Endurance | Minimum 10,000 cycles |
| প্যাকেজ | 48-ball CSBGA |
| Number of Package Balls | 48 balls |
| Terminal Type | BGA ball |
| মাউন্টিং স্টাইল | Surface mount |
| Temperature Grade | Commercial |
| Process Technology | 0.35 µm CMOS |
| Lead-Free Status | Contains lead |
| RoHS স্ট্যাটাস | RoHS non-compliant |
| Configuration Retention | Nonvolatile configuration storage |
XC9536XL-5CS48C 48 balls পিন কনফিগারেশন গাইড
XC9536XL-5CS48C (48 balls প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি XC9536XL-5CS48C.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
XC9536XL-5CS48C এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Peripheral Interface Control, Industrial Control Panels, Data Format Conversion, Instrumentation Signal Conditioning, Data Acquisition Control, Interface Bridging.
Peripheral Interface Control
The XC9536XL-5CS48C fits peripheral interface control because 36 macrocells and 36 I/O pins can implement command decoding, register selection, chip enables, interrupt routing, and status multiplexing without a microcontroller. Its nominal 5 ns propagation delay provides useful timing margin for local control paths, while nonvolatile configuration preserves the programmed behavior after power loss. Place the CPLD close to the controlled devices, route clock-like signals away from switching nodes, and validate every asynchronous path against the worst-case system timing budget.
সুপারিশকৃত
Industrial Control Panels
The XC9536XL-5CS48C can implement deterministic control logic for industrial panels, including button debounce coordination, display multiplexing, indicator sequencing, relay-command gating, and status aggregation. Its 36 I/O pins provide direct board-level connectivity, and the 5 ns grade is appropriate for short control paths that are not dominated by external connector or relay delays. The commercial temperature designation must be checked against the enclosure temperature, while isolation, surge protection, and safety requirements should be handled by the surrounding circuitry.
সুপারিশকৃত
Data Format Conversion
The XC9536XL-5CS48C is useful for parallel-to-serial formatting, bit-field rearrangement, byte swapping, and protocol-specific sequencing because combinational and registered logic can be distributed across 36 macrocells. The 5 ns nominal propagation delay supports short data-path transformations, but registered boundaries should be added where accumulated combinational delay approaches the system clock requirement. Validate setup and hold timing at both the source and destination interfaces, and avoid using combinational outputs as clock signals unless the timing and edge requirements are explicitly verified.
সুপারিশকৃত
Instrumentation Signal Conditioning
The XC9536XL-5CS48C can coordinate sensor selection, measurement sequencing, range switching, trigger routing, and data-ready signaling in compact instrumentation. Its 36 macrocells allow multiple control functions to be consolidated while the 5 ns speed grade supports local logic near sensors and converters. Keep sensitive analog and high-impedance nodes separate from programming and switching signals, use controlled ground returns, and add external isolation or level translation wherever the connected device operates outside the CPLD's electrical limits.
সুপারিশকৃত
Data Acquisition Control
In a data-acquisition system, the XC9536XL-5CS48C can implement channel sequencing, sample-valid generation, trigger multiplexing, and acquisition-state management. The 36 I/O pins support multiple converters or sensors, while the 5 ns propagation grade allows closely coordinated control outputs. Establish a defined startup sequence, keep reset and configuration access deterministic, and ensure that acquisition clocks originate from a suitable source rather than being generated through combinational CPLD paths. Signal-integrity checks should include clock crosstalk, return paths, and connector-related delay.
সুপারিশকৃত
Interface Bridging
The XC9536XL-5CS48C can bridge incompatible digital interfaces by translating enable polarity, bus ownership, protocol framing, and ready/valid signals between two devices. The 36 macrocells permit multiple small protocol translators to be consolidated in one 48-ball CSBGA, reducing board area compared with several separate glue-logic ICs. Use registered outputs for signals crossing between clock domains, constrain timing appropriately, and test every bus direction and disabled state. The 5 ns grade should be compared against both source and destination interface timing specifications.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা XC9536XL-5CS48C — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | XC9536XL-5CSG48C | XC9536XL-7CS48C | XC9536XL-10CSG48C | XC9536XL-15CSG48C | XC9536XL-10CS48C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 48-ball CSBGA | 48-ball CSBGA | 48-ball CSBGA | 48-ball CSBGA | 48-ball CSBGA | 48-ball CSBGA |
| Device Type | CPLD | CPLD | CPLD | CPLD | CPLD | CPLD |
| Macrocells | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells |
| I/O Pins | 36 I/O pins | 36 I/O pins | 36 I/O pins | 36 I/O pins | 36 I/O pins | 36 I/O pins |
| Usable Gates | 800 gates | 800 gates | 800 gates | 800 gates | 800 gates | 800 gates |
| Nominal Propagation Delay | 5 ns | 5 ns | 7 ns | 10 ns | 15 ns | 10 ns |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Special Features | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
মূল পার্থক্যসমূহ
- Faster nominal propagation delay than slower XC9536XL speed grades (বনামXC9536XL-7CS48C)
- Substantially tighter timing margin than the 10 ns family option (বনামXC9536XL-10CSG48C)
- Compact 36-macrocell integration in a 48-ball CSBGA (বনামXC9536XL-10CS48C)
ডিজাইন নোট
Implement the 48-ball CSBGA land pattern from the manufacturer package drawing and verify every ball assignment against the XC9536XL pin-description table. Maintain uninterrupted ground-plane references beneath the device, place supply bypass capacitors close to their designated balls, and avoid routing fast signals through the ball-connection region. Confirm PCB solder mask, paste, and assembly-process compatibility with the package geometry before releasing the board for fabrication.
Treat programming, configuration, clock, and asynchronous control pins as separate classes during routing. Keep clock traces short, provide a continuous reference plane, and avoid stubs or unnecessary layer changes. Register outputs where the design uses CPLD-generated control signals, and verify setup, hold, and maximum-frequency requirements across all speed grades that may be used as alternates. A 7 ns or slower replacement changes the timing margin even when the logic function remains identical.
Do not treat the XC9536XV-5CS48C as an automatic substitute for the XC9536XL-5CS48C. Cross-reference information identifies inconsistent parameters and possible circuit-structure changes between those family members. Likewise, do not assume that an ordering-code suffix change leaves qualification requirements unchanged. Confirm the exact electrical ratings, temperature grade, package drawing, configuration architecture, and PCB ball map before approving any replacement.
Estimate junction temperature using the actual supply voltage, output current, power dissipation, and the package thermal data for the assembled PCB. Estimated: Pdevice equals VIN times Idevice plus internal losses, and junction rise equals Pdevice multiplied by the effective junction-to-ambient thermal resistance of the populated assembly. Compare the resulting junction temperature with the device rating and maintain copper continuity around the relevant supply and ground balls.
কমপ্লায়েন্স তথ্য
The component is identified as RoHS non-compliant and as containing lead. No AEC-Q100 qualification or separate halogen-free and conflict-minerals declarations are stated.
