XC9536XL-5CS48C - 36-Macrocell 5 ns CPLD | AMD
MPN: XC9536XL-5CS48C ✗ Cuối đờiXC9536XL-5CS48C Tóm tắt
A complex programmable logic device, or CPLD, belongs to the programmable-logic hierarchy alongside FPGAs. Unlike a microcontroller that executes software instructions, a CPLD implements digital logic directly in a nonvolatile macrocell and interconnect architecture. This gives predictable propagation behavior, retained configuration between power cycles, and straightforward reprogramming. The XC9536XL combines 36 macrocells with 36 available I/O resources in a surface-mount 48-ball package.
Key characteristics include a 5 ns nominal propagation delay, 800 usable gates, and a 3.3 V operating supply. The 36 macrocells can implement combinational and registered logic for bus control, address decoding, interface translation, state machines, and peripheral interconnection. In-system programming supports configuration updates without removing the device from the assembled circuit, while the stated minimum of 10,000 program and erase cycles supports applications requiring repeated configuration changes during development or field servicing.
The XC9500 architecture uses CMOS programmable logic and a compact macrocell structure intended for moderate-complexity glue logic. With 36 I/O pins, the device provides substantial board-level connectivity without moving to a larger programmable-logic device. Designers should still budget timing margin for the selected 5 ns speed grade and account for package-routing and external-circuit delays when defining system timing requirements.
Typical uses include peripheral interface expansion, data-format conversion, control-signal multiplexing, memory-interface decoding, instrumentation control, and industrial control panels. The 48-ball CSBGA package also supports compact designs where connector and component density matter, although BGA assembly requires appropriate PCB land patterns, inspection, and assembly capability.
PCB implementation requires careful ball assignment, short supply connections, solid ground-plane continuity, and signal-routing discipline. Configuration pins and programming interface signals should be routed according to the manufacturer pin-description table, while exposed thermal and power-distribution requirements should be followed for the exact CSBGA land pattern. Prototype assembly should also account for the difficulty of inspecting or rework beneath a BGA package.
This product page consolidates the XC9536XL-5CS48C electrical characteristics, programmable-logic capabilities, compatible family options, and practical implementation guidance. It supports faster part selection by distinguishing speed-grade changes, package constraints, programming requirements, and the practical trade-offs involved in replacing a compact 36-macrocell CPLD.
Bộ thay thế dễ dàng lắp đặt cho XC9536XL-5CS48C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC9536XL-5CS48C (cùng hình factor và footprint) — khác nhau ở Device Type, Terminal Type, Mounting Style, Package Form, RoHS Status.
XC9536XL-5CSG48C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC9536XL-7CS48C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →XC9536XL-10CSG48C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
XC9536XL-15CSG48C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC9536XL-10CS48C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC9536XL-5CS48C Tỷ lệ tối đa & tính chất điện
| Device Type | Complex Programmable Logic Device (CPLD) |
| Architecture | XC9500 high-performance CPLD architecture |
| Number of Macrocells | 36 macrocells |
| Number of I/O Pins | 36 I/O pins |
| Usable Gates | 800 gates |
| Nominal Propagation Delay | 5 ns |
| Điện áp cung cấp | 3.3 V |
| Programming Type | In-system programmable |
| Program and Erase Endurance | Minimum 10,000 cycles |
| Hộp | 48-ball CSBGA |
| Number of Package Balls | 48 balls |
| Terminal Type | BGA ball |
| Kiểu lắp đặt | Surface mount |
| Temperature Grade | Commercial |
| Process Technology | 0.35 µm CMOS |
| Lead-Free Status | Contains lead |
| Trạng thái RoHS | RoHS non-compliant |
| Configuration Retention | Nonvolatile configuration storage |
Hướng dẫn cấu hình chân XC9536XL-5CS48C 48 balls
Cấu hình chân cho XC9536XL-5CS48C (48 balls gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho XC9536XL-5CS48C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
XC9536XL-5CS48C phù hợp cho 6 Áp dụngs: Peripheral Interface Control, Industrial Control Panels, Data Format Conversion, Instrumentation Signal Conditioning, Data Acquisition Control, Interface Bridging.
Peripheral Interface Control
The XC9536XL-5CS48C fits peripheral interface control because 36 macrocells and 36 I/O pins can implement command decoding, register selection, chip enables, interrupt routing, and status multiplexing without a microcontroller. Its nominal 5 ns propagation delay provides useful timing margin for local control paths, while nonvolatile configuration preserves the programmed behavior after power loss. Place the CPLD close to the controlled devices, route clock-like signals away from switching nodes, and validate every asynchronous path against the worst-case system timing budget.
Được đề xuất
Industrial Control Panels
The XC9536XL-5CS48C can implement deterministic control logic for industrial panels, including button debounce coordination, display multiplexing, indicator sequencing, relay-command gating, and status aggregation. Its 36 I/O pins provide direct board-level connectivity, and the 5 ns grade is appropriate for short control paths that are not dominated by external connector or relay delays. The commercial temperature designation must be checked against the enclosure temperature, while isolation, surge protection, and safety requirements should be handled by the surrounding circuitry.
Được đề xuất
Data Format Conversion
The XC9536XL-5CS48C is useful for parallel-to-serial formatting, bit-field rearrangement, byte swapping, and protocol-specific sequencing because combinational and registered logic can be distributed across 36 macrocells. The 5 ns nominal propagation delay supports short data-path transformations, but registered boundaries should be added where accumulated combinational delay approaches the system clock requirement. Validate setup and hold timing at both the source and destination interfaces, and avoid using combinational outputs as clock signals unless the timing and edge requirements are explicitly verified.
Được đề xuất
Instrumentation Signal Conditioning
The XC9536XL-5CS48C can coordinate sensor selection, measurement sequencing, range switching, trigger routing, and data-ready signaling in compact instrumentation. Its 36 macrocells allow multiple control functions to be consolidated while the 5 ns speed grade supports local logic near sensors and converters. Keep sensitive analog and high-impedance nodes separate from programming and switching signals, use controlled ground returns, and add external isolation or level translation wherever the connected device operates outside the CPLD's electrical limits.
Được đề xuất
Data Acquisition Control
In a data-acquisition system, the XC9536XL-5CS48C can implement channel sequencing, sample-valid generation, trigger multiplexing, and acquisition-state management. The 36 I/O pins support multiple converters or sensors, while the 5 ns propagation grade allows closely coordinated control outputs. Establish a defined startup sequence, keep reset and configuration access deterministic, and ensure that acquisition clocks originate from a suitable source rather than being generated through combinational CPLD paths. Signal-integrity checks should include clock crosstalk, return paths, and connector-related delay.
Được đề xuất
Interface Bridging
The XC9536XL-5CS48C can bridge incompatible digital interfaces by translating enable polarity, bus ownership, protocol framing, and ready/valid signals between two devices. The 36 macrocells permit multiple small protocol translators to be consolidated in one 48-ball CSBGA, reducing board area compared with several separate glue-logic ICs. Use registered outputs for signals crossing between clock domains, constrain timing appropriately, and test every bus direction and disabled state. The 5 ns grade should be compared against both source and destination interface timing specifications.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC9536XL-5CS48C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC9536XL-5CSG48C | XC9536XL-7CS48C | XC9536XL-10CSG48C | XC9536XL-15CSG48C | XC9536XL-10CS48C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 48-ball CSBGA | 48-ball CSBGA | 48-ball CSBGA | 48-ball CSBGA | 48-ball CSBGA | 48-ball CSBGA |
| Device Type | CPLD | CPLD | CPLD | CPLD | CPLD | CPLD |
| Macrocells | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells |
| I/O Pins | 36 I/O pins | 36 I/O pins | 36 I/O pins | 36 I/O pins | 36 I/O pins | 36 I/O pins |
| Usable Gates | 800 gates | 800 gates | 800 gates | 800 gates | 800 gates | 800 gates |
| Nominal Propagation Delay | 5 ns | 5 ns | 7 ns | 10 ns | 15 ns | 10 ns |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Special Features | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
Bảo phân biệt quan trọng
- Faster nominal propagation delay than slower XC9536XL speed grades (vsXC9536XL-7CS48C)
- Substantially tighter timing margin than the 10 ns family option (vsXC9536XL-10CSG48C)
- Compact 36-macrocell integration in a 48-ball CSBGA (vsXC9536XL-10CS48C)
Ghi chú thiết kế
Implement the 48-ball CSBGA land pattern from the manufacturer package drawing and verify every ball assignment against the XC9536XL pin-description table. Maintain uninterrupted ground-plane references beneath the device, place supply bypass capacitors close to their designated balls, and avoid routing fast signals through the ball-connection region. Confirm PCB solder mask, paste, and assembly-process compatibility with the package geometry before releasing the board for fabrication.
Treat programming, configuration, clock, and asynchronous control pins as separate classes during routing. Keep clock traces short, provide a continuous reference plane, and avoid stubs or unnecessary layer changes. Register outputs where the design uses CPLD-generated control signals, and verify setup, hold, and maximum-frequency requirements across all speed grades that may be used as alternates. A 7 ns or slower replacement changes the timing margin even when the logic function remains identical.
Do not treat the XC9536XV-5CS48C as an automatic substitute for the XC9536XL-5CS48C. Cross-reference information identifies inconsistent parameters and possible circuit-structure changes between those family members. Likewise, do not assume that an ordering-code suffix change leaves qualification requirements unchanged. Confirm the exact electrical ratings, temperature grade, package drawing, configuration architecture, and PCB ball map before approving any replacement.
Estimate junction temperature using the actual supply voltage, output current, power dissipation, and the package thermal data for the assembled PCB. Estimated: Pdevice equals VIN times Idevice plus internal losses, and junction rise equals Pdevice multiplied by the effective junction-to-ambient thermal resistance of the populated assembly. Compare the resulting junction temperature with the device rating and maintain copper continuity around the relevant supply and ground balls.
Thông tin tuân thủ
The component is identified as RoHS non-compliant and as containing lead. No AEC-Q100 qualification or separate halogen-free and conflict-minerals declarations are stated.
