XMC4400F100K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon
MPN: XMC4400F100K256ABXQSA1 ✓ সক্রিয়XMC4400F100K256ABXQSA1 সারাংশ
A microcontroller is a semiconductor device that integrates a processor core, memory, timers, communication interfaces, and analog or digital peripherals onto one package. The Cortex-M4 core provides a 32-bit processing architecture with hardware execution support for common embedded instructions, while the XMC4000 family targets industrial applications requiring deterministic timing, reliable communications, and extensive I/O. This places the device in the hierarchy of embedded microcontroller, 32-bit MCU, ARM Cortex-M4 MCU, and industrial semiconductor.
The XMC4400F100K256ABXQSA1 combines 120MHz processing performance with 256KB flash and 80KB SRAM. Its communication resources include CAN, Ethernet, I2C, LIN, SPI, UART, and USB according to the product listing. These interfaces support connections to sensors, actuators, industrial transceivers, service modules, supervisory systems, and plant-floor equipment. The LQFP-100 package provides 100 leads and is suitable for conventional PCB assembly and inspection processes.
The XMC4000 architecture is designed for industrial applications where deterministic peripherals and a broad peripheral set simplify system integration. Ethernet and CAN support industrial communication links, while SPI, UART, I2C, and LIN allow connection to a wide range of embedded devices. Timer and event-management resources support precise control tasks in machinery, test systems, and connected production equipment. A system designer can therefore use one MCU for supervisory logic, communications, and real-time control rather than splitting those tasks across separate devices.
Typical applications include industrial Ethernet controllers, CAN-based automation nodes, motor-control peripherals, sensor aggregation systems, building and factory automation equipment, and industrial USB gateways. The 120MHz operating frequency supports responsive protocol handling and control-loop execution, while 256KB flash provides room for application code, bootloader functions, configuration data, and communication stacks.
The principal design consideration is the 100-pin footprint. Designers should assign all pins according to the manufacturer pin-description table, route communication interfaces away from sensitive analog circuitry, and provide the decoupling and clock network required by the reference design. The LQFP package is thermally and mechanically straightforward for industrial boards, but its fine pitch still requires controlled soldermask, paste, and assembly capability. Use the Infineon XMC4400 datasheet and reference manual for the complete pin list, electrical limits, startup requirements, and peripheral multiplexing rules.
এর জন্য ড্রপ-ইন বিকল্প XMC4400F100K256ABXQSA1 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible XMC4400F100K256ABXQSA1 (একই form factor এবং footprint) — পার্থক্য রয়েছে Product Type, Architecture, Package, Flash Memory, Ethernet Support.
XMC4400F100K256BAXUMA2
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XMC4400F100K512BAXUMA1
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XMC4400F100K512BAXQMA1
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XMC4300F100K256AAXUMA1
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XMC4300F100K256AAXQMA1
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →XMC4400F100K256ABXQSA1 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Series | XMC4000 |
| Processor Core | ARM Cortex-M4 |
| Architecture | ARM 32-bit single-core |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 256 KB (256K x 8) |
| SRAM | 80 KB |
| প্যাকেজ | PG-LQFP-100-11 |
| পিনের সংখ্যা | 100 pins |
| Temperature Grade | Industrial |
| CAN Interface | Yes |
| Ethernet Interface | Yes |
| I2C Interface | Yes |
| LIN Interface | Yes |
| SPI Interface | Yes |
| UART Interface | Yes |
| USB Interface | Yes |
| মাউন্টিং টাইপ | Surface mount |
XMC4400F100K256ABXQSA1 pg-lqfp-100-11 পিন কনফিগারেশন গাইড
XMC4400F100K256ABXQSA1 (pg-lqfp-100-11 প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি XMC4400F100K256ABXQSA1.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
XMC4400F100K256ABXQSA1 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Ethernet Control Node, CAN-Based Factory Automation, Motor Control and Machinery Interface, Industrial Sensor Aggregation, Building Automation Controller, Industrial USB Service Gateway.
Industrial Ethernet Control Node
The XMC4400F100K256ABXQSA1 fits industrial Ethernet control nodes that require real-time processing alongside network connectivity. Its 120MHz ARM Cortex-M4 core can service protocol handling, supervisory logic, and control tasks, while the 256KB flash stores firmware and configuration data. The XMC4000 communication set includes Ethernet, CAN, SPI, UART, and USB, enabling the controller to bridge service interfaces to local sensors and actuators. Use the manufacturer Ethernet reference design as the basis for PHY selection, clocking, isolation, and magnetics. The 100-pin LQFP package also leaves dedicated routing flexibility, but every high-speed or differential network signal must follow the reference layout and impedance guidance.
সুপারিশকৃত
CAN-Based Factory Automation
The XMC4400F100K256ABXQSA1 is appropriate for CAN-based factory automation modules that coordinate sensors, drives, and remote I/O. The 120MHz Cortex-M4 core provides headroom for deterministic control logic, while CAN, LIN, and UART support multiple local and vehicle-style communication networks. Its 80KB RAM can accommodate protocol buffers and working state, and the 256KB flash is sufficient for application firmware, configuration, and a compact bootloader. Place the MCU and transceiver on an isolated or non-isolated communications section according to the equipment architecture. Confirm transceiver electrical parameters, termination strategy, ground reference, and fault behavior with the applicable CAN reference design rather than deriving them from the MCU specifications alone.
সুপারিশকৃত
Motor Control and Machinery Interface
The XMC4400F100K256ABXQSA1 can serve as the supervisory and communications MCU in motor-control machinery, where a dedicated control algorithm may coexist with safety monitoring and plant-network communication. The 120MHz core supports responsive control-loop coordination, and the XMC4000 family provides multiple timer and serial-interface resources for position sensing, inverter status, and diagnostics. Its 256KB flash and 80KB RAM are useful for storing parameters, fault history, and communication handlers. The industrial LQFP-100 package is practical for machine-control boards where a large lead count supports numerous I/O functions. Validate pin multiplexing, interrupt priorities, PWM or capture assignments, and external protection circuits against the Infineon reference manual before hardware release.
সুপারিশকৃত
Industrial Sensor Aggregation
The XMC4400F100K256ABXQSA1 is well suited to industrial sensor aggregation when many local sensors must be normalized and forwarded to a higher-level controller. Its I2C and SPI interfaces can connect to sensors and memory devices, while UART and CAN provide upstream links. The 120MHz Cortex-M4 core handles sampling coordination, filtering, diagnostics, and protocol conversion, and the 256KB flash reserves space for firmware, sensor tables, and calibration data. The 80KB RAM supports queues and protocol state without requiring external memory in typical designs. Preserve analog and digital grounding discipline, provide local bypassing at each supply rail, and check the input thresholds of every attached sensor. For long cable runs or noisy factory environments, use isolated interface components and validate the complete signal path.
সুপারিশকৃত
Building Automation Controller
The XMC4400F100K256ABXQSA1 supports building automation controllers that coordinate lighting, climate equipment, access devices, and field sensors. Its Ethernet, CAN, LIN, and serial interfaces allow the controller to participate in wired building networks, while the 120MHz Cortex-M4 core manages protocol stacks and local control rules. The 256KB flash stores application logic and configuration, and 80KB RAM accommodates communication state and short event queues. In HVAC or access-control systems, consider low-power operating modes, watchdog behavior, and safe output defaults during firmware faults. Because this device is an automotive-grade ordering code with an industrial suffix combination, confirm the exact temperature and qualification requirements for the target installation before using it as a standard building-automation component.
সুপারিশকৃত
Industrial USB Service Gateway
The XMC4400F100K256ABXQSA1 can act as an industrial USB-to-network service gateway where field equipment needs a local maintenance connection. USB connects to a host or service interface, while Ethernet, CAN, UART, and other serial interfaces connect to plant equipment. The 120MHz Cortex-M4 core can handle protocol translation and diagnostics, and the 256KB flash stores firmware for protocol conversion, device identification, and configuration management. Its 80KB RAM is suitable for buffering short control or diagnostic transfers. Design the USB and Ethernet sections as controlled high-speed interfaces, including appropriate routing, return paths, impedance, and isolation decisions. The manufacturer reference manual should govern USB pin selection, transceiver requirements, clock configuration, and firmware initialization sequence.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা XMC4400F100K256ABXQSA1 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | XMC4400F100K256BAXUMA2 | XMC4400F100K512BAXUMA1 | XMC4400F100K512BAXQMA1 | XMC4300F100K256AAXUMA1 | XMC4300F100K256AAXQMA1 |
|---|---|---|---|---|---|---|
| Package | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Flash Memory | 256 KB | 256 KB | 512 KB | 512 KB | 256 KB | 256 KB |
| SRAM | 80 KB | 80 KB | 80 KB | 80 KB | 80 KB | 80 KB |
| Core Architecture | 32-bit single-core | 32-bit single-core | 32-bit single-core | 32-bit single-core | 32-bit single-core | 32-bit single-core |
| Temperature Grade | Industrial | Automotive | Automotive | Automotive | Automotive | Automotive |
মূল পার্থক্যসমূহ
- Matches the original flash capacity while offering a closely related XMC4400 ordering option (বনামXMC4400F100K256BAXUMA2)
- Larger flash option for expanded firmware (বনামXMC4400F100K512BAXUMA1)
- Same-family continuity within the 100-pin XMC portfolio (বনামXMC4300F100K256AAXUMA1)
ডিজাইন নোট
Route Ethernet, USB, CAN, and other high-speed interfaces according to the Infineon reference design, keeping continuous return paths beneath the interfaces and separating them from switching power stages. Place the MCU decoupling capacitors at the corresponding supply pins and keep the exposed routing area on each net short. Do not assign pins solely by package position; check the pin-description table for alternate peripheral functions and reserved pins.
Follow the manufacturer guidance for supply sequencing, voltage levels, and power-up conditions. Decouple each MCU supply rail locally with the specified capacitor network and keep analog or communication transceiver supplies on their own quiet branches where the reference design separates them. Verify startup behavior for peripherals that can drive external buses during reset, especially CAN, Ethernet, and USB connections, because incorrect external configuration can create contention during initialization.
Use a copper area and thermal via pattern appropriate for the LQFP-100 assembly while maintaining the package's solder-mask and land-pattern requirements. The principal thermal path is through the device leads and board copper to the enclosure or chassis. Estimate the worst-case junction temperature from ambient temperature, package dissipation, and the actual board thermal resistance, then validate it in the assembled enclosure rather than relying only on a nominal PCB estimate.
Do not treat a family member with a similar ordering code as an automatic drop-in replacement. Compare package drawing, lead count, pin multiplexing, flash capacity, temperature grade, qualification suffix, and exposed programming or test functions before substitution. For XMC4400 and XMC4300 alternatives, review the device-specific peripherals because the family positioning and package alone do not guarantee identical board-level behavior.
কমপ্লায়েন্স তথ্য
Compliance status must be confirmed for the exact ordering code using the manufacturer product page and current material compliance documentation.