Zilog

Z86C9012PSC - 8-Bit 12MHz ROMless Z8 MCU | Zilog

MPN: Z86C9012PSC ✗ জীবনকালের সমাপ্তি
40-pin DIP Package 12 MHz Speed External memory; no internal ROM Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

Z86C9012PSC সারাংশ

The Zilog Z86C9012PSC is an 8-bit, 12 MHz ROMless Z8 Consumer Controller Processor microcontroller supplied in a 40-pin DIP package. It belongs to the Z86C90/C89 CCP family and provides 236 bytes of general-purpose RAM, CMOS-compatible interfacing, and external memory support for code flexibility.

A ROMless microcontroller is designed to execute application code from external memory rather than from internal program ROM. This architecture separates the fixed control logic from the application program, allowing firmware capacity and code updates to be handled by external devices. The Z86C9012PSC therefore suits controllers whose program storage requirements are established separately from the microcontroller choice.

The Z86C9012PSC operates as an 8-bit CMOS microcontroller with a maximum clock rate of 12 MHz. Its 236 bytes of internal general-purpose RAM support variables, working registers, stack operations, and short-lived control data. The external-memory interface is the defining architectural feature for designs that need configurable code storage, external program execution, or a separation between firmware volume and controller silicon.

The Z86C9012PSC is packaged in a 40-pin DIP, a through-hole format that is well suited to legacy industrial equipment, controller boards, prototypes, and repair assemblies. Because it is a ROMless part, the board design must provide the external program-memory interface, address decoding, and required memory circuitry rather than relying on internal ROM.

Typical applications include dedicated appliance controllers, industrial control panels, motor-sequence controllers, keyboard and human-interface controllers, embedded control modules, and legacy Z8-based products being maintained or refreshed without changing the 40-pin DIP footprint. The DIP format also makes the device practical for socketed assemblies and boards where through-hole insertion is preferred over fine-pitch surface-mount assembly.

When designing around this controller, confirm the external memory interface, reset behavior, available port resources, and clock requirements against the manufacturer datasheet. The device also requires a regulated supply and appropriate decoupling. Because the package is not a surface-mount option, modern compact products may require a board-level footprint decision rather than a package conversion.

This page consolidates the verified 8-bit architecture, 12 MHz clock, ROMless configuration, 236-byte RAM, 40-pin DIP construction, packaging information, verified drop-in candidate, and practical design considerations into a compact engineering reference for sourcing and product-maintenance work.

এর জন্য ড্রপ-ইন বিকল্প Z86C9012PSC — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

Z86C9012PSG

✅ ড্রপ-ইন
📦 40-pin DIP (C40)
Same 12 MHz ROMless Z8 architecture, 40-pin DIP footprint, and published terminal compatibility; order-code qualification details may differ

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

Z86C9012PSC সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Microcontroller Type 8-bit ROMless microcontroller
সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি 12 MHz
Architecture Z8 8-bit CMOS
Series Z86C90/C89 CCP Consumer Controller Processor
Program Memory External memory; no internal ROM
General-Purpose RAM 236 bytes
Logic Level CMOS compatible
প্যাকেজ 40-pin DIP
Package Variant C40
মাউন্টিং টাইপ Through-hole
Shipping Container Tube
Moisture Sensitivity Level MSL 1 (unlimited)
Peak Reflow Temperature Not specified
External Memory Support Supported

Z86C9012PSC c40 পিন কনফিগারেশন গাইড

Z86C9012PSC (c40 প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

Z86C9012PSC-এর জন্য c40 প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি Z86C9012PSC.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

Z86C9012PSC এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Legacy Industrial Control Boards, Appliance and Equipment Sequencer, Motor Sequence and Stepper Control, Human-Interface Controller, Product Maintenance and Spare Modules, Programmable Access and Security Controller.

🏭

Legacy Industrial Control Boards

The Z86C9012PSC fits an existing industrial controller when the board already uses the Z86C90/C89 external-memory interface and a 40-pin DIP footprint. Its 8-bit Z8 architecture and 236 bytes of general-purpose RAM are sufficient for sequencing, discrete control, and compact supervisory logic, while external program memory allows firmware capacity to be defined by the memory device rather than the controller. The 12 MHz operating rate supports deterministic peripheral and bus timing within the limits established by the manufacturer. Use the original Z8 firmware toolchain and verify that the external address, data, and control wiring matches the target board.

🔧

Appliance and Equipment Sequencer

The Z86C9012PSC can act as the dedicated sequencer in an appliance or laboratory-equipment controller when compact logic, external firmware storage, and through-hole assembly are preferred. Its 236 bytes of RAM provide working space for state variables, while the ROMless architecture separates the control program from the MCU and permits code storage to be selected during product configuration. The 40-pin DIP package supports socketed or conventional through-hole PCB layouts. Design the external program memory and bus decoding to match the firmware map, then validate relay timing, interlocks, and fault handling during the integration phase.

⚡

Motor Sequence and Stepper Control

For motor sequencing and stepper-index control, the Z86C9012PSC provides a compact 8-bit control engine with 236 bytes of RAM for position variables and a 12 MHz clock for regular step timing. Its ROMless design allows application code to remain in external memory, which is useful where multiple controlled machine variants share one hardware platform. Use the manufacturer pin and timing documentation to assign step, direction, limit, and home-sensor signals, and confirm that the external-memory access timing does not interrupt critical step-rate requirements.

🖥️

Human-Interface Controller

The Z86C9012PSC is appropriate for a dedicated keypad, panel, or front-panel controller where the interface logic must remain separate from a main processor. Its 8-bit architecture can scan inputs, debounce switches, update display or indicator outputs, and manage a simple command protocol within the available 236 bytes of RAM. External program memory gives the designer flexibility in code organization for multiple panel variants. Because the device is ROMless and supplied in a 40-pin DIP, the interface board must provide the external memory interface and conventional through-hole routing, with signal-integrity checks based on the final bus topology.

🛠️

Product Maintenance and Spare Modules

The Z86C9012PSC is particularly useful for maintaining or reproducing legacy Z8-based modules where the original controller footprint is a 40-pin DIP and the stored program must remain in external memory. Its published family position and documented drop-in candidate make it possible to evaluate a replacement without changing the board outline or through-hole pattern. The maintenance engineer should still compare device revision, temperature grade, external-memory timing, and firmware compatibility against the removed component. Use controlled substitution procedures and confirm the operating voltage before inserting a replacement into energized equipment.

🔒

Programmable Access and Security Controller

The Z86C9012PSC can support a programmable access-control module when the system uses external program memory and a simple Z8-based decision engine. The 236-byte RAM area can hold short-lived authentication state, counters, and timing variables, while the 12 MHz clock supports polling of readers, lock sensors, and request lines. Because the MCU itself has no internal ROM, the security firmware must reside in a controlled external memory device, and the board should include the reset and timing behavior required by the system. A security review should cover unauthorized firmware modification and physical bus-access risks.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

AT89C51-12JA 12 MHz 40-pin DIP microcontroller comparison reference ব্যবহৃত হয়: Legacy Industrial Control Boards, Motor Sequence and Stepper Control, Human-Interface Controller, Product Maintenance and Spare Modules, Programmable Access and Security Controller MC1489NG4 Texas Instruments ব্যবহৃত হয়: Legacy Industrial Control Boards, Appliance and Equipment Sequencer, Programmable Access and Security Controller MC14C88BP onsemi ব্যবহৃত হয়: Appliance and Equipment Sequencer W77L516A25FL Nuvoton Technology Corporation ব্যবহৃত হয়: Motor Sequence and Stepper Control SP3232EHEY-L MaxLinear ব্যবহৃত হয়: Human-Interface Controller Z86C9012PSG Closest documented same-footprint Zilog replacement ব্যবহৃত হয়: Product Maintenance and Spare Modules
What is the Zilog Z86C9012PSC?
The Zilog Z86C9012PSC is an 8-bit, 12 MHz, ROMless Z8 microcontroller in a 40-pin DIP package. It is a member of the Z86C90/C89 Consumer Controller Processor family and includes 236 bytes of general-purpose RAM. Unlike a microcontroller with internal program ROM, the Z86C9012PSC expects application code to be supplied through its external-memory interface, making it suitable for controllers with separately defined firmware-storage requirements.
Is the Z86C9012PSC ROMless?
Yes, the Z86C9012PSC is a ROMless CMOS microcontroller. Its application program must be stored in external memory connected through the device's external-memory interface. This architecture provides flexibility when code size, update strategy, or separation between firmware and controller hardware matters. A complete board design therefore has to include the external program-memory device, address decoding, and the associated bus wiring described in the manufacturer datasheet.
How much RAM does the Z86C9012PSC contain?
The Z86C9012PSC contains 236 bytes of general-purpose RAM. That memory is available for variables, stack operations, working data, and other short-lived control information rather than for a complete application program. Because application code resides in external memory, designers should budget the available 236 bytes carefully and use the manufacturer's register and memory-map documentation when planning data structures and interrupt routines.
What clock speed does the Z86C9012PSC use?
The Z86C9012PSC is specified for operation at up to 12 MHz. It is an 8-bit CMOS Z8-family controller, so its instruction timing, bus behavior, and peripheral timing should be evaluated using the manufacturer's timing information. The maximum clock rate also determines the external-memory system budget, so oscillator tolerance, clock distribution, and memory access timing must be considered together during schematic and timing validation.
What package does the Z86C9012PSC use?
The Z86C9012PSC uses a 40-pin DIP, also identified as the C40 package option. It is a through-hole package intended for conventional PCB insertion, socketed assemblies, prototypes, and maintenance of legacy equipment. The 40-pin DIP footprint differs from the 44-pin LCC and 44-pin QFP options offered elsewhere in the Z86C90/C89 family, so those package variants are not direct footprint replacements for this part.
Where can I download the Z86C9012PSC datasheet?
The Z86C9012PSC datasheet can be reached through the manufacturer-data reference on this page, which links to the Zilog device document hosted by AllDatasheet. Before releasing a design, use the pin-description table, electrical characteristics, memory-interface diagrams, and timing information in that document. The online datasheet index also links to manufacturer and distributor resources for the same MPN, including configuration and ordering information.
Where is the Z86C9012PSC pinout documented?
The Z86C9012PSC pinout is documented in the pin-description and package-drawing sections of the Zilog manufacturer datasheet. The 40-pin DIP package includes the external-memory interface, port pins, control signals, clock connections, and supply pins required by the ROMless architecture. Use that table when assigning PCB nets because signal names and alternate functions are package-specific, particularly around the external address and data bus.
What is the best drop-in replacement for the Z86C9012PSC?
The closest documented drop-in candidate is the Zilog Z86C9012PSG, which a published comparison identifies as having consistent terminals and package characteristics with the Z86C9012PSC. Both are 12 MHz, 40-pin ROMless Z8 microcontroller variants. Confirm temperature grade, package suffix, device revision, and supply availability against the original design before treating the candidate as a production substitute, because ordering codes can encode qualification and commercial options.
Is the Z86C9012PSG the same as the Z86C9012PSC?
The Z86C9012PSG is the closest documented alternative to the Z86C9012PSC and is described as a completely replaceable 12 MHz, 40-pin DIP option with consistent terminals and packages. It is not simply a packaging-code change: both belong to the ROMless Z86C90/C89 controller family, but the suffix still identifies a distinct ordering variant. Verify qualification details and current lifecycle status before approving it for new production.
What is the best Zilog equivalent for the Z86C9012PSC?
The best Zilog equivalent identified for a same-footprint substitution is the Z86C9012PSG. It matches the target's 12 MHz ROMless Z8 architecture and 40-pin DIP package, and the published comparison describes terminal and package compatibility without requiring PCB modification. This makes PSG the preferred Zilog drop-in candidate, while broader Z8 controller options with different packages or memory organizations are not drop-in replacements.
Can an AT89C51-12JA replace the Z86C9012PSC?
The AT89C51-12JA is a 12 MHz 40-pin DIP alternative that appears in published comparisons, but it is not a verified drop-in replacement for the Z86C9012PSC. The AT89C51 belongs to the 8051 family and uses internal flash memory, while the Z86C9012PSC is a Z8 ROMless controller with 236 bytes of RAM and an external-memory architecture. Treat the comparison as a family-level reference, not a pin-compatible substitution.
When should I choose the Z86C9012PSC instead of another 8-bit MCU?
Choose the Z86C9012PSC when an existing design depends on the Z8 instruction set, the Z86C90/C89 external-memory interface, or a maintained 40-pin DIP controller platform. It is most appropriate for legacy industrial, appliance, and embedded-control products where the board already implements its external program memory and firmware tools target Z8 code. For a new design without existing Z8 firmware or board assets, a currently supported general-purpose MCU may offer a simpler path.
Is the Z86C9012PSC suitable for industrial control applications?
The Z86C9012PSC can suit industrial control and maintenance applications that require its Z8 architecture, 12 MHz operation, external program memory, and 40-pin through-hole footprint. Its suitability depends on availability, temperature qualification, and the condition of the associated Z8 firmware toolchain. For new industrial designs, confirm the device's operating-temperature range, lifecycle status, and long-term supply before committing the platform.
How do I power the Z86C9012PSC in a design?
Power the Z86C9012PSC from a regulated CMOS-compatible supply and place local bypass capacitors close to the device supply pins. Because the exact supply-voltage range, current consumption, and pin-level connection requirements are not established on this page, use the electrical-characteristics and recommended-application sections of the manufacturer datasheet for final values. Decoupling placement and signal conditioning should be validated at the 12 MHz operating point.
Where can I buy the Z86C9012PSC and what is its lead time?
Use the Request a Quote form on this page to ask for Z86C9012PSC pricing, stock confirmation, minimum order quantity, and current lead time. The form is the appropriate commercial channel because availability for this ROMless DIP controller can vary by lot, package suffix, and regional supply. Provide the target quantity, date code requirement, and any required temperature qualification when submitting the request.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা Z86C9012PSC — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the Z86C9012PSC for maintenance, repair, or replication of an existing Z8-based 40-pin DIP design, especially when firmware is stored in external memory and the original board and toolchain are already in place. Choose Z86C9012PSG when a same-brand drop-in candidate is needed and its qualification details are acceptable; published comparisons describe matching 12 MHz ROMless operation, terminals, and package. Do not treat the AT89C51-12JA as a drop-in substitute despite its 12 MHz 40-pin DIP format, because the 8051 instruction set, internal-flash architecture, and device organization differ. For a new product without legacy Z8 firmware or board constraints, a currently supported MCU may reduce lifecycle and tooling risk. In every case, verify supply voltage, temperature grade, external-memory timing, and lifecycle status before design release.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য Z86C9012PSG
Package 40-pin DIP (C40) 40-pin DIP (C40)
Brand Zilog Zilog
Microcontroller Architecture Z8 8-bit CMOS Z8 8-bit CMOS
Maximum Clock Frequency 12 MHz 12 MHz
Program Memory Architecture ROMless with external memory support ROMless with external memory support
General-Purpose RAM 236 bytes 236 bytes
Pin Compatibility 40-pin DIP reference Published as terminal and package compatible
Series Z86C90/C89 CCP Z86C90/C89 CCP
Lifecycle Status Unknown Unknown

মূল পার্থক্যসমূহ

  • Closest documented same-footprint substitution (বনামZ86C9012PSG)
  • External-memory flexibility (বনামAT89C51-12JA)
  • Compact working memory for dedicated control (বনামAT89C51-12JA)

ডিজাইন নোট

Design the PCB around the 40-pin DIP footprint rather than the 44-pin LCC or QFP options available elsewhere in the CCP family. Confirm drill positions, pin-1 orientation, and component clearance before layout release. The through-hole format is advantageous for socketed maintenance assemblies, but it increases board area and limits density compared with a modern surface-mount microcontroller. Preserve access to the external-memory bus and avoid routing long sensitive clock signals beside adjacent switching nodes.

Provide a regulated CMOS-compatible supply and place the manufacturer-recommended bypass capacitors directly across the device supply pins. Route the supply and ground connections with low loop area, and keep the ground reference continuous beneath the DIP footprint where practical. Because this is a ROMless controller that depends on external memory for program execution, validate supply tolerance, clock startup, and reset behavior together rather than treating the 12 MHz operating point as the only timing requirement.

Do not assume that any 40-pin, 12 MHz microcontroller is interchangeable with the Z86C9012PSC. The Z8 instruction set, register map, interrupt behavior, and external-memory organization are device-specific, while alternatives such as the AT89C51-12JA use a different architecture and internal flash. Verify the Z8 firmware toolchain, memory map, port multiplexing, and timing before selecting a substitute. For the closest same-footprint option, confirm Z86C9012PSG qualification details against the removed device.

External program memory and the associated address and data bus are central to this ROMless controller's operation. Keep bus traces short, provide a stable clock, and follow the manufacturer's guidance on address and data-line timing. If the external bus crosses a noisy board region, consider series damping or a controlled placement of the memory device after signal-integrity testing. Firmware design must also account for the limited 236 bytes of general-purpose RAM and external wait states during memory access.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Compliance declarations were not identified in the verified product listings. The 40-pin DIP package and legacy Z8 family do not by themselves establish RoHS, REACH, or automotive qualification.

ডেটা যাচাই করা হয়েছে: 2026-11-17 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

Z86C9012PSC datasheet Z86C9012PSC datasheet pdf Z86C9012PSC pinout Z86C9012PSC specifications Z86C9012PSC equivalent Z86C9012PSC replacement Z86C9012PSC cross reference Z86C9012PSC vs Z86C9012PSG Zilog Z86C9012PSC Z86C9012PSC price Z86C9012PSC stock 40 pin ROMless Z8 microcontroller

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Zilog Z86C9012PSC Z86C9012PSG Z8 Z86C90/C89 CCP Consumer Controller Processor 8-bit microcontroller ROMless microcontroller CMOS microcontroller 12 MHz clock 236 bytes RAM external program memory 40-pin DIP C40 package through-hole package Z8 instruction set AT89C51-12JA 8051 architecture internal flash memory industrial control appliance control human-interface controller MSL 1 Tube packaging
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন