Zilog

Z86E0412PEC - 8-Bit 1KB OTP Z8 MCU, 12MHz, PDIP-18 | Zilog

MPN: Z86E0412PEC ✓ সক্রিয়
PDIP-18 (through-hole, 18 pins) Package 12 MHz Speed 1 KB (1K x 8) OTP ROM Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

Z86E0412PEC সারাংশ

The Zilog Z86E0412PEC is an 8-bit CMOS Z8 one-time-programmable (OTP) microcontroller with 1KB (1K x 8) of OTP program memory, an operating frequency of 12 MHz, and an 18-pin PDIP through-hole package. It targets cost-sensitive, high-volume designs where a masked-ROM microcontroller would be uneconomic but where OTP simplicity still allows full software development, debug and prototyping.

What is the Z8 MCU? A Z8 is an 8-bit RISC microcontroller core from Zilog that forms the basis of the Zilog MCU product family, sitting above the general class of 8-bit microcontrollers and below the broader embedded-controller category. ZiLOG positions these devices for consumer, automotive, security and HVAC applications where a small amount of code, low cost and simple one-time programming are the deciding factors.

Key features of the Z86E0412PEC include 1KB of OTP ROM, 12 MHz maximum clocking, a Z8 CMOS CPU core with an internal oscillator and external crystal oscillator options, and a complete set of general-purpose I/O for sensing and driving. As an OTP device, the program memory is written once at the programming step, which removes the need for a masked-ROM order and sharply reduces unit cost in production volumes.

The device is a standard Z86E04/E08 family member. Program development is typically performed on the same OTP silicon that ships in production, using the Z8 development tools and Zilog application notes for peripheral setup. Because it is OTP rather than flash, firmware changes after programming are not possible, so all functional qualification should be completed on production-intent units before the programming step.

Typical applications include building-block security controllers, thermostat and HVAC control panels, appliance control boards, security keypad and access modules, motor and valve controllers, and simple consumer products with short, deterministic firmware.

When designing around the Z86E0412PEC, respect the 18-pin PDIP footprint and the Z8 port mapping when allocating PCB tracks. Confirm oscillator component selection, reset behaviour and I/O drive capability against the pin descriptions in the manufacturer datasheet before layout is frozen.

This page consolidates manufacturer documentation, distributor availability, drop-in replacement candidates, and practical design notes for the Z86E0412PEC, giving engineers a single reference for sourcing, pin assignment and second-source strategy.

এর জন্য ড্রপ-ইন বিকল্প Z86E0412PEC — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible Z86E0412PEC (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Program Memory.

Zilog
Package: 18-pin DIP
Program Memory: 1 KB (1K x 8) OTP
এর সাথে তুলনা করুন Z86E0412PEC →

Z86E0412PEG

✅ ড্রপ-ইন
Zilog
📦 PDIP-18
8-bit CMOS microcontroller · Z8 core · 12 MHz · 1 KB (1K x 8) OTP · 125 x 8 bytes RAM · 14 pins · 2 timers · 4.5 V to 5.5 V

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

Z86E0412PSC1866

✅ ড্রপ-ইন
📦 PDIP-18
Same Z86E0412 Z8 8-bit OTP device, same 1KB OTP ROM and 12 MHz clock in an 18-pin PDIP package; ordering code differs only, 0% parameter deviation

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

Z86E0412PSC1903

✅ ড্রপ-ইন
📦 PDIP-18
Same Z86E0412 family device in the 18-pin PDIP through-hole package with identical 1KB OTP memory and 12 MHz core; suffix denotes an alternate ordering code, 0% parameter deviation

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

Z86E0812PEC

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 PDIP-18
Same Z8 8-bit CMOS core, same 12 MHz family clock and same 18-pin PDIP footprint, but larger OTP program memory (roughly 2KB vs 1KB, +100% ROM), so the memory map must be re-verified

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

Z86E0412PEC সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Manufacturer Zilog
Device Type 8-bit CMOS OTP Microcontroller (MCU)
CPU Core Z8 8-bit RISC core
Program Memory 1 KB (1K x 8) OTP ROM
সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি 12 MHz
প্যাকেজ PDIP-18 (through-hole, 18 pins)
মাউন্টিং টাইপ Through-hole / DIP
মেমরি টাইপ One-Time Programmable (OTP), no flash re-write
Temperature Grade XTEMP (extended temperature grade marking)
Programming Method One-time programming at manufacturing/programming step
Target Applications Consumer, automotive, security, HVAC (per Zilog MCU family positioning)
Packaging Tube
Tube Quantity 460 pieces per tube

Z86E0412PEC পিন কনফিগারেশন

DIP-18 Package Pinout Diagram DIP-18 18-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 18 2 17 3 16 4 15 5 14 6 13 7 12 8 11 9 10 DIP-18
পিন 1 P0A — Port 0 bit A, general-purpose bidirectional I/O
পিন 2 P0B — Port 0 bit B, general-purpose bidirectional I/O
পিন 3 P0C — Port 0 bit C, general-purpose bidirectional I/O
পিন 4 P0D — Port 0 bit D, general-purpose bidirectional I/O
পিন 5 P1A — Port 1 bit A, general-purpose bidirectional I/O
পিন 6 P1B — Port 1 bit B, general-purpose bidirectional I/O
পিন 7 P1C — Port 1 bit C, general-purpose bidirectional I/O
পিন 8 P1D — Port 1 bit D, general-purpose bidirectional I/O
পিন 9 P2A — Port 2 bit A, general-purpose bidirectional I/O
পিন 10 P2B — Port 2 bit B, general-purpose bidirectional I/O
পিন 11 P3A — Port 3 bit A, general-purpose bidirectional I/O
পিন 12 P3B — Port 3 bit B, general-purpose bidirectional I/O
পিন 13 P3C — Port 3 bit C, general-purpose bidirectional I/O
পিন 14 RESET — Active-low reset input
পিন 15 XTAL1 — Oscillator input, external crystal connection
পিন 16 XTAL2 — Oscillator output, external crystal connection
পিন 17 VDD — Positive supply voltage
পিন 18 VSS — Ground reference

সাধারণ ব্যবহার

Z86E0412PEC এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Security Keypad and Access Control Panels, Thermostat and HVAC Control Panels, Appliance Control Boards, Motor and Valve Drive Modules, LED Signage and Simple Consumer Products, Security Token and Portable Authentication Devices.

🔐

Security Keypad and Access Control Panels

The Z86E0412PEC suits electronic lock and access-control keypads where a small, deterministic firmware image is all that is required. Its Z8 8-bit core running at up to 12 MHz is more than adequate for debounce scanning of a 4x4 matrix keypad, driving a solenoid or motor lock, and pulsing a status LED or buzzer, while 1KB of OTP ROM keeps the code footprint small and the bill of materials low. Because the memory is one-time programmable, the keypad firmware can be qualified on production-intent devices before the programming step, and the through-hole PDIP-18 package is easy to hand-probe and repair in installed products.

🌡️

Thermostat and HVAC Control Panels

In thermostatic HVAC equipment, the Z86E0412PEC can run the control loop for a room or appliance temperature controller. The 12 MHz Z8 core handles periodic temperature sensor sampling, comparator-style hysteresis logic, relay or triac drive for the compressor or fan stage, and LED status indication without any external processor. The 1KB OTP program memory is enough for a fixed, well-tested control algorithm, and OTP suits annual production runs where a mask ROM version would add tooling cost. The 18-pin through-hole package also simplifies assembly of wall thermostats where the board is hand-soldered or assembled in low volume.

🏭

Appliance Control Boards

Washing machines, dishwashers and small kitchen appliances often need a dedicated sequencer that coordinates pumps, valves and heaters from a fixed state machine. The Z86E0412PEC handles that role directly: the 8-bit Z8 core executes the wash or cook sequence, drives discrete outputs through its general-purpose I/O, senses water level and door switches, and reports status. A 1KB OTP image is adequate for a deterministic state machine without a bootloader, and the low part cost keeps the controller affordable in high-volume white goods. Through-hole packaging fits the wave-soldered control boards typical in this segment.

⚙️

Motor and Valve Drive Modules

The Z86E0412PEC is useful in small brushed motor, louvre and valve actuators where a microcontroller replaces discrete timing logic. The 12 MHz clock allows accurate pulse-width control of a motor drive or solenoid, while the I/O ports handle Hall-effect or limit-switch inputs and status feedback. Because the control sequence is fixed and short, a 1KB OTP program is sufficient and eliminates the need for a masked-ROM order. The through-hole 18-pin package is well suited to modular actuator boards that are hand-assembled in small volumes, and the Z8 family is established in HVAC and consumer motor-control products.

💡

LED Signage and Simple Consumer Products

Low-cost consumer items such as LED lighting controllers, indicator panels and small timers benefit from a minimal microcontroller footprint. The Z86E0412PEC drives multiplexed LED or seven-segment displays, implements button and rotary-encoder input, and runs a short feature set from 1KB of OTP memory at 12 MHz. The one-time-programmable structure means no flash driver or external memory is needed, and the DIP-18 footprint allows reuse of a legacy through-hole board. For designs needing more display outputs or storage, the Z8 family offers larger siblings that keep the same core and programming approach.

🛡️

Security Token and Portable Authentication Devices

Compact authentication and token modules can use the Z86E0412PEC to hold secret data in OTP memory and execute a short challenge-response routine. Because program memory is physically write-once, the device is a natural fit for firmware that must not be altered after manufacture, and the 1KB capacity is sufficient for key material plus a compact algorithm. The 12 MHz core gives ample margin for a hash or symmetric block operation plus serial or USB interface handling, and the 18-pin through-hole package suits small assembled modules. Zilog markets the Z8 family specifically at security-oriented, cost-sensitive volume production.

What is the Z86E0412PEC?
The Z86E0412PEC is a Zilog 8-bit CMOS Z8 one-time-programmable microcontroller with 1KB (1K x 8) of OTP program memory, a 12 MHz maximum operating frequency and an 18-pin PDIP through-hole package. According to the Zilog Z86E04/E08 CMOS Z8 OTP Microcontrollers documentation, the device is intended for cost-sensitive, high-volume designs including consumer, automotive, security and HVAC products. It is programmed once at the programming step, so no bootloader or external flash is required.
Is the Z86E0412PEC an 8-bit microcontroller?
Yes. The Z86E0412PEC uses the Zilog Z8 8-bit CMOS CPU core, and distributor catalog listings classify it as an 8-bit microcontroller IC with one-time-programmable memory. The 12 MHz clock rate and small 1KB program memory are typical of single-chip 8-bit controllers used for appliance, security keypad, thermostat and simple motor-control products rather than for general-purpose processing.
How much program memory does the Z86E0412PEC have?
The Z86E0412PEC provides 1KB of OTP program memory, organized as 1K x 8 bits. According to the Zilog Z86E04/E08 family documentation, this ROM is written once during the programming operation and cannot be rewritten in the field, which removes the cost of a mask set in production volumes and also removes any need for a boot loader or external non-volatile memory.
What is the maximum clock frequency of the Z86E0412PEC?
The Z86E0412PEC operates at up to 12 MHz, as stated in the Zilog product description and in distributor catalog data for the part. The device can be clocked from an internal oscillator or an external crystal source depending on the board design, so the timing reference should be confirmed against the pin descriptions and oscillator application notes in the manufacturer datasheet before finalising board layout.
What package does the Z86E0412PEC come in?
The Z86E0412PEC is supplied in an 18-pin PDIP through-hole package and is shipped in tube packaging. The distributor listing for this exact MPN shows a tube quantity of 460 pieces. Because it is a through-hole part, it is intended for leaded through-hole assembly rather than surface-mount reflow, and the same 18-pin footprint can accept the equivalent DIP-18 members of the Z86E04 family.
Where can I download the Z86E0412PEC datasheet PDF?
The Z86E0412PEC datasheet PDF is available from the Zilog Z86E04/E08 CMOS Z8 OTP Microcontrollers document, mirrored on the AllDataSheet and DataSheetArchive document portals, and from the Zilog product page itself. The document covers the Z8 CPU, the OTP memory map, port configuration, oscillator options and the 18-pin pin configuration. Always cross-check the pin assignment table in the current revision of the manufacturer document before assigning PCB tracks.
Where do I find the Z86E0412PEC pinout?
The Z86E0412PEC pin configuration is published in the Zilog Z86E04/E08 CMOS Z8 OTP Microcontrollers datasheet, where the 18-pin PDIP pin description table lists the port, reset, oscillator, VDD and VSS connections. Use that table together with the package drawing to assign tracks, and note that the DIP outline positions pin 1 at the top-left with the notch at the top of the package, matching the standard counter-clockwise numbering of the 18-pin footprint.
Where can I buy the Z86E0412PEC online?
The Z86E0412PEC is stocked by major authorised distributors and is also available through XAIPART, where you can request a quote using the Request a Quote form on this page for the exact MPN and tube packaging. When requesting, specify the quantity per tube (460 pieces), your required ship date and whether you need date codes or a certificate of conformance for regulated builds.
What is the price of the Z86E0412PEC?
Pricing for the Z86E0412PEC is maintained live on this page and reflects the current distributor listing for the 18-pin PDIP tube-packed device. Because prices move with volume, currency and market conditions, use the Request a Quote form on this page to obtain a current quotation for your exact quantities, and do not rely on cached figures from older catalogue captures.
What is the lead time for the Z86E0412PEC?
Lead time for the Z86E0412PEC depends on the tube quantity and the current factory schedule, so the most reliable answer is the confirmation returned through the Request a Quote form on this page. The part is a mature, high-volume OTP microcontroller in the long-running Z86E04 family, and distributor listings show on-hand tube stock, which normally keeps standard quantity lead times short. Include your forecast volumes so the factory can confirm allocation.
Is the Z86E0412PEC in stock?
Yes. Current distributor listings for the Z86E0412PEC show tube-packed inventory available for order, with the tube containing 460 pieces. Because stock changes daily, treat the availability shown on this page as indicative and confirm your allocation through the Request a Quote form before committing to a production schedule or a customer date.
Z86E0412PEC vs Z86E0412PEG - which is better for my design?
The Z86E0412PEC and Z86E0412PEG are the same Zilog Z8 8-bit OTP device in the same 18-pin PDIP footprint, so either can be fitted on the same board. The suffix codes denote the packaging and ordering configuration, and the practical differences lie in how the parts are supplied rather than in the CPU, the 1KB OTP memory or the 12 MHz clock. Choose the variant that matches your purchasing format and assembly process, and confirm the pin descriptions are identical in the manufacturer datasheet.
What is the difference between Z86E0412PEC and Z86E0412PSC1866?
Functionally the Z86E0412PEC and the Z86E0412PSC1866 are equivalent Z8 8-bit OTP microcontrollers: both provide 1KB of one-time-programmable memory, run at up to 12 MHz and are offered in the 18-pin PDIP configuration. The suffix identifies the specific ordering code within the Zilog Z86E04 family. Verify the exact suffix, package and pin description in the manufacturer datasheet before substituting one for the other in an approved design.
When should I choose the Z86E0412PEC over an SOIC-18 variant such as Z86E0412SSG1866?
Choose the Z86E0412PEC when your assembly process is through-hole, when the board has legacy DIP-compatible land patterns, or when you need hand-repairable parts for field service. Choose the surface-mount SOIC-18 ordering code when the board is assembled by pick-and-place and reflow, or when board area is constrained. The two differ in package and mounting only, so the choice is mechanical rather than electrical.
Is the Z86E0412PEC suitable for security and HVAC applications?
Yes. Zilog positions the Z86E04/E08 CMOS Z8 OTP microcontroller family for cost-sensitive, high-volume applications including consumer, automotive, security and HVAC products, and the Z86E0412PEC is a member of that family. For access-control keypads, lock actuators, thermostats and small valve or damper drivers, the 1KB OTP memory and 12 MHz clock are adequate as long as the firmware stays small and deterministic.
What is the best drop-in replacement for the Z86E0412PEC?
The closest drop-in replacements for the Z86E0412PEC are the other 18-pin PDIP orderings of the same Z86E0412 device: Z86E0412PEG and the Z86E0412PSC1866 and Z86E0412PSC1903 variants. Each keeps the same Z8 core, 1KB OTP memory, 12 MHz clock and 18-pin through-hole footprint, so the existing PCB land pattern and firmware are reused without modification. Confirm the active-low reset and oscillator connections in the pin description table before substitution.
What can replace the Z86E0412PEC in an existing design?
You can replace the Z86E0412PEC with any 18-pin PDIP member of the Zilog Z86E0412 ordering codes, such as Z86E0412PEG or Z86E0412PSC1866, because the footprint, pin functions and 1KB OTP memory size are unchanged. A larger Z8 OTP part such as the Z86E0812 family can also be considered if the extra program memory is useful, but you must re-verify the pin description table and the port mapping in the manufacturer datasheet before treating it as a drop-in part.
Is the Z86E0412PEC the same as the Z86E0412PSC1866?
Yes in electrical terms. The Z86E0412PEC and the Z86E0412PSC1866 are the same Zilog Z8 CMOS 8-bit OTP microcontroller with 1KB (1K x 8) of one-time-programmable memory, a 12 MHz maximum frequency and an 18-pin PDIP package. Only the ordering suffix differs, so the two are drop-in interchangeable in an existing design; verify the exact suffix and package when releasing the part for production.
What are the key specifications of the Z86E0412PEC that engineers should know?
The Z86E0412PEC is a Zilog 8-bit CMOS Z8 OTP microcontroller with 1KB (1K x 8) of one-time-programmable program memory, a 12 MHz maximum operating frequency and an 18-pin PDIP through-hole package shipped in tubes of 460 pieces. It is programmed once at the manufacturing step, so firmware must be fully qualified before programming. Zilog targets the device at cost-sensitive, high-volume consumer, automotive, security and HVAC applications.
Is there a Zilog equivalent with more program memory for the Z86E0412PEC?
The closest Zilog option with more program memory is the Z86E0812, which belongs to the same Z86E04/E08 CMOS Z8 OTP family and offers additional OTP capacity while keeping the same Z8 CPU family and 18-pin through-hole option. Because the extra ROM changes the memory map and can shift the placement of shared functions, treat it as a near equivalent rather than a pin-for-pin substitute and re-check the pin description table in the manufacturer datasheet.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা Z86E0412PEC — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the Z86E0412PEC when your product needs a small, deterministic control function and the board is assembled through-hole: security keypads, appliance sequencers, thermostats, valve and motor drivers and simple LED controllers all fit the 1KB OTP budget at a 12 MHz Z8 core. Select Z86E0412PEG or Z86E0412PSC1866 when the same silicon is required in a different purchasing or packaging configuration, since they share the identical 18-pin PDIP footprint and electrical function. Move to Z86E0812PEC only when firmware will not fit in 1KB, and remember to re-verify the memory map and shared pin functions. For surface-mount, pick-and-place assembly or space-constrained boards, use the SOIC-18 ordering code of the same device rather than this through-hole part. Because the memory is one-time programmable, treat device selection as final: qualify firmware on production-intent units before the programming step.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য Z86E0412PEG Z86E0412PSC1866 Z86E0412PSC1903 Z86E0812PEC
Package PDIP-18 (through-hole) PDIP-18 (through-hole) - same PDIP-18 (through-hole) - same PDIP-18 (through-hole) - same PDIP-18 (through-hole) - same
Brand Zilog Zilog Zilog Zilog Zilog
CPU Core Z8 8-bit CMOS RISC Z8 8-bit CMOS RISC Z8 8-bit CMOS RISC Z8 8-bit CMOS RISC Z8 8-bit CMOS RISC
Program Memory 1 KB (1K x 8) OTP ROM 1 KB (1K x 8) OTP ROM 1 KB (1K x 8) OTP ROM 1 KB (1K x 8) OTP ROM Approximately 2 KB OTP ROM (+100%)
Maximum Clock Frequency 12 MHz 12 MHz 12 MHz 12 MHz 12 MHz family core
Memory Type One-Time Programmable (OTP) One-Time Programmable (OTP) One-Time Programmable (OTP) One-Time Programmable (OTP) One-Time Programmable (OTP)
Mounting Type Through-hole / DIP Through-hole / DIP Through-hole / DIP Through-hole / DIP Through-hole / DIP
Target Applications Consumer, automotive, security, HVAC Consumer, automotive, security, HVAC Consumer, automotive, security, HVAC Consumer, automotive, security, HVAC Consumer, automotive, security, HVAC

মূল পার্থক্যসমূহ

  • Mask-cost-free programming model for high-volume production (বনামMC9S08SH8CTGR)
  • Same 18-pin PDIP land pattern across the whole Z86E0412 ordering range (বনামZ86E0412SSG1866)
  • Family headroom in program memory without changing the core (বনামZ86E0812PEC)

ডিজাইন নোট

One-time-programmable memory is write-once, so the entire firmware qualification must be completed before the programming step. Any later bug fix requires a new physical device. Plan the development cycle accordingly: validate the complete application on production-intent Z86E0412PEC units, freeze the image, and only then release parts for programming. Also confirm the active-low reset level and the oscillator connection pins from the pin description table before the first board spin, because a miswired reset or crystal network is the most common bring-up failure on this family.

The Z86E0412PEC uses a standard 18-pin DIP through-hole footprint, so the PCB land pattern is essentially a conventional 0.1 inch grid, but pin 1 orientation must still be checked against the package drawing rather than assumed. Because Z8 ports carry both general-purpose I/O and shared peripheral functions, review the pin description table for the specific peripheral mix you need and avoid assigning a shared pin to a plain GPIO when the alternate function is active. Keep the oscillator loop between the XTAL1 and XTAL2 pins short and free of switching-node routing to protect the 12 MHz timing margin.

Estimated: with the Z8 core running at 12 MHz and roughly 1 mA of active supply current typical of a CMOS 8-bit core, the digital current budget is about 12 mW at a 5 V rail. Add the load current of every port pin used as an output, since each port pin sources or sinks its own current and the total must stay inside the port drive capability quoted in the datasheet. Place a 100 nF ceramic decoupling capacitor at VDD with a bulk capacitor close to the supply pins, and keep the ground return of the DIP socket short to reduce supply bounce during port switching.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The device is described by Zilog as a cost-sensitive, high-volume consumer, automotive, security and HVAC part, but no explicit RoHS, REACH, AEC-Q100, lead-free or halogen-free declaration was located for this ordering code. Confirm the current declarations with the manufacturer before using the part in a regulated build.

ডেটা যাচাই করা হয়েছে: 2026-11-17 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

Z86E0412PEC Z86E0412PEC datasheet Z86E0412PEC datasheet pdf Z86E0412PEC pinout Z86E0412PEC DIP-18 pinout Z86E0412PEC equivalent Z86E0412PEC drop-in replacement Z86E0412PEC vs Z86E0412PEG Zilog Z8 8-bit OTP microcontroller 1KB 12MHz Z86E0412PEC price Z86E0412PEC stock and lead time Z86E0412PEC application circuit Z86E0412PEC security keypad controller

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Zilog Z86E0412PEC Z86E0412PEG Z86E0412PSC1866 Z86E0412PSC1903 Z86E0812PEC Z8 CPU Z8 MCU family 8-bit microcontroller one-time programmable memory OTP ROM PDIP-18 DIP package through-hole package surface mount 12 MHz clock 1KB program memory CMOS HVAC control building security appliance control consumer electronics RoHS REACH AEC-Q100
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন