Z86E0412PEC - 8-Bit 1KB OTP Z8 MCU, 12MHz, PDIP-18 | Zilog
MPN: Z86E0412PEC ✓ NakahandaZ86E0412PEC Ulas
What is the Z8 MCU? A Z8 is an 8-bit RISC microcontroller core from Zilog that forms the basis of the Zilog MCU product family, sitting above the general class of 8-bit microcontrollers and below the broader embedded-controller category. ZiLOG positions these devices for consumer, automotive, security and HVAC applications where a small amount of code, low cost and simple one-time programming are the deciding factors.
Key features of the Z86E0412PEC include 1KB of OTP ROM, 12 MHz maximum clocking, a Z8 CMOS CPU core with an internal oscillator and external crystal oscillator options, and a complete set of general-purpose I/O for sensing and driving. As an OTP device, the program memory is written once at the programming step, which removes the need for a masked-ROM order and sharply reduces unit cost in production volumes.
The device is a standard Z86E04/E08 family member. Program development is typically performed on the same OTP silicon that ships in production, using the Z8 development tools and Zilog application notes for peripheral setup. Because it is OTP rather than flash, firmware changes after programming are not possible, so all functional qualification should be completed on production-intent units before the programming step.
Typical applications include building-block security controllers, thermostat and HVAC control panels, appliance control boards, security keypad and access modules, motor and valve controllers, and simple consumer products with short, deterministic firmware.
When designing around the Z86E0412PEC, respect the 18-pin PDIP footprint and the Z8 port mapping when allocating PCB tracks. Confirm oscillator component selection, reset behaviour and I/O drive capability against the pin descriptions in the manufacturer datasheet before layout is frozen.
This page consolidates manufacturer documentation, distributor availability, drop-in replacement candidates, and practical design notes for the Z86E0412PEC, giving engineers a single reference for sourcing, pin assignment and second-source strategy.
Mga alternatibo na pwedeng ilagay na Z86E0412PEC — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok Z86E0412PEC (parehas na form factor at footprint) — pagkakaiba sa Package, Program Memory.
Z86E0412PEG
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →Z86E0412PSC1866
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
Z86E0412PSC1903
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
Z86E0812PEC
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
Z86E0412PEC Mga Pinakamataas na Rating at Electrical Characteristics
| Manufacturer | Zilog |
| Device Type | 8-bit CMOS OTP Microcontroller (MCU) |
| CPU Core | Z8 8-bit RISC core |
| Program Memory | 1 KB (1K x 8) OTP ROM |
| Maksimum na Taktiko ng Oras | 12 MHz |
| Packhaging | PDIP-18 (through-hole, 18 pins) |
| Uri ng Pagpapasok | Through-hole / DIP |
| Uri ng Memory | One-Time Programmable (OTP), no flash re-write |
| Temperature Grade | XTEMP (extended temperature grade marking) |
| Programming Method | One-time programming at manufacturing/programming step |
| Target Applications | Consumer, automotive, security, HVAC (per Zilog MCU family positioning) |
| Packaging | Tube |
| Tube Quantity | 460 pieces per tube |
Pin Configuration ng Z86E0412PEC
| Pin 1 | P0A — Port 0 bit A, general-purpose bidirectional I/O |
| Pin 2 | P0B — Port 0 bit B, general-purpose bidirectional I/O |
| Pin 3 | P0C — Port 0 bit C, general-purpose bidirectional I/O |
| Pin 4 | P0D — Port 0 bit D, general-purpose bidirectional I/O |
| Pin 5 | P1A — Port 1 bit A, general-purpose bidirectional I/O |
| Pin 6 | P1B — Port 1 bit B, general-purpose bidirectional I/O |
| Pin 7 | P1C — Port 1 bit C, general-purpose bidirectional I/O |
| Pin 8 | P1D — Port 1 bit D, general-purpose bidirectional I/O |
| Pin 9 | P2A — Port 2 bit A, general-purpose bidirectional I/O |
| Pin 10 | P2B — Port 2 bit B, general-purpose bidirectional I/O |
| Pin 11 | P3A — Port 3 bit A, general-purpose bidirectional I/O |
| Pin 12 | P3B — Port 3 bit B, general-purpose bidirectional I/O |
| Pin 13 | P3C — Port 3 bit C, general-purpose bidirectional I/O |
| Pin 14 | RESET — Active-low reset input |
| Pin 15 | XTAL1 — Oscillator input, external crystal connection |
| Pin 16 | XTAL2 — Oscillator output, external crystal connection |
| Pin 17 | VDD — Positive supply voltage |
| Pin 18 | VSS — Ground reference |
Tipikal na mga Gamit
Z86E0412PEC ay nararapat para sa 6 aplikasyons: Security Keypad and Access Control Panels, Thermostat and HVAC Control Panels, Appliance Control Boards, Motor and Valve Drive Modules, LED Signage and Simple Consumer Products, Security Token and Portable Authentication Devices.
Security Keypad and Access Control Panels
The Z86E0412PEC suits electronic lock and access-control keypads where a small, deterministic firmware image is all that is required. Its Z8 8-bit core running at up to 12 MHz is more than adequate for debounce scanning of a 4x4 matrix keypad, driving a solenoid or motor lock, and pulsing a status LED or buzzer, while 1KB of OTP ROM keeps the code footprint small and the bill of materials low. Because the memory is one-time programmable, the keypad firmware can be qualified on production-intent devices before the programming step, and the through-hole PDIP-18 package is easy to hand-probe and repair in installed products.
Inirekomenda
Thermostat and HVAC Control Panels
In thermostatic HVAC equipment, the Z86E0412PEC can run the control loop for a room or appliance temperature controller. The 12 MHz Z8 core handles periodic temperature sensor sampling, comparator-style hysteresis logic, relay or triac drive for the compressor or fan stage, and LED status indication without any external processor. The 1KB OTP program memory is enough for a fixed, well-tested control algorithm, and OTP suits annual production runs where a mask ROM version would add tooling cost. The 18-pin through-hole package also simplifies assembly of wall thermostats where the board is hand-soldered or assembled in low volume.
Inirekomenda
Appliance Control Boards
Washing machines, dishwashers and small kitchen appliances often need a dedicated sequencer that coordinates pumps, valves and heaters from a fixed state machine. The Z86E0412PEC handles that role directly: the 8-bit Z8 core executes the wash or cook sequence, drives discrete outputs through its general-purpose I/O, senses water level and door switches, and reports status. A 1KB OTP image is adequate for a deterministic state machine without a bootloader, and the low part cost keeps the controller affordable in high-volume white goods. Through-hole packaging fits the wave-soldered control boards typical in this segment.
Inirekomenda
Motor and Valve Drive Modules
The Z86E0412PEC is useful in small brushed motor, louvre and valve actuators where a microcontroller replaces discrete timing logic. The 12 MHz clock allows accurate pulse-width control of a motor drive or solenoid, while the I/O ports handle Hall-effect or limit-switch inputs and status feedback. Because the control sequence is fixed and short, a 1KB OTP program is sufficient and eliminates the need for a masked-ROM order. The through-hole 18-pin package is well suited to modular actuator boards that are hand-assembled in small volumes, and the Z8 family is established in HVAC and consumer motor-control products.
Inirekomenda
LED Signage and Simple Consumer Products
Low-cost consumer items such as LED lighting controllers, indicator panels and small timers benefit from a minimal microcontroller footprint. The Z86E0412PEC drives multiplexed LED or seven-segment displays, implements button and rotary-encoder input, and runs a short feature set from 1KB of OTP memory at 12 MHz. The one-time-programmable structure means no flash driver or external memory is needed, and the DIP-18 footprint allows reuse of a legacy through-hole board. For designs needing more display outputs or storage, the Z8 family offers larger siblings that keep the same core and programming approach.
Inirekomenda
Security Token and Portable Authentication Devices
Compact authentication and token modules can use the Z86E0412PEC to hold secret data in OTP memory and execute a short challenge-response routine. Because program memory is physically write-once, the device is a natural fit for firmware that must not be altered after manufacture, and the 1KB capacity is sufficient for key material plus a compact algorithm. The 12 MHz core gives ample margin for a hash or symmetric block operation plus serial or USB interface handling, and the 18-pin through-hole package suits small assembled modules. Zilog markets the Z8 family specifically at security-oriented, cost-sensitive volume production.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for Z86E0412PEC — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | Z86E0412PEG | Z86E0412PSC1866 | Z86E0412PSC1903 | Z86E0812PEC |
|---|---|---|---|---|---|
| Package | PDIP-18 (through-hole) | PDIP-18 (through-hole) - same | PDIP-18 (through-hole) - same | PDIP-18 (through-hole) - same | PDIP-18 (through-hole) - same |
| Brand | Zilog | Zilog | Zilog | Zilog | Zilog |
| CPU Core | Z8 8-bit CMOS RISC | Z8 8-bit CMOS RISC | Z8 8-bit CMOS RISC | Z8 8-bit CMOS RISC | Z8 8-bit CMOS RISC |
| Program Memory | 1 KB (1K x 8) OTP ROM | 1 KB (1K x 8) OTP ROM | 1 KB (1K x 8) OTP ROM | 1 KB (1K x 8) OTP ROM | Approximately 2 KB OTP ROM (+100%) |
| Maximum Clock Frequency | 12 MHz | 12 MHz | 12 MHz | 12 MHz | 12 MHz family core |
| Memory Type | One-Time Programmable (OTP) | One-Time Programmable (OTP) | One-Time Programmable (OTP) | One-Time Programmable (OTP) | One-Time Programmable (OTP) |
| Mounting Type | Through-hole / DIP | Through-hole / DIP | Through-hole / DIP | Through-hole / DIP | Through-hole / DIP |
| Target Applications | Consumer, automotive, security, HVAC | Consumer, automotive, security, HVAC | Consumer, automotive, security, HVAC | Consumer, automotive, security, HVAC | Consumer, automotive, security, HVAC |
Pangunahing mga Pagkakaiba
- Mask-cost-free programming model for high-volume production (kumpara saMC9S08SH8CTGR)
- Same 18-pin PDIP land pattern across the whole Z86E0412 ordering range (kumpara saZ86E0412SSG1866)
- Family headroom in program memory without changing the core (kumpara saZ86E0812PEC)
Talaan ng Disenyo
One-time-programmable memory is write-once, so the entire firmware qualification must be completed before the programming step. Any later bug fix requires a new physical device. Plan the development cycle accordingly: validate the complete application on production-intent Z86E0412PEC units, freeze the image, and only then release parts for programming. Also confirm the active-low reset level and the oscillator connection pins from the pin description table before the first board spin, because a miswired reset or crystal network is the most common bring-up failure on this family.
The Z86E0412PEC uses a standard 18-pin DIP through-hole footprint, so the PCB land pattern is essentially a conventional 0.1 inch grid, but pin 1 orientation must still be checked against the package drawing rather than assumed. Because Z8 ports carry both general-purpose I/O and shared peripheral functions, review the pin description table for the specific peripheral mix you need and avoid assigning a shared pin to a plain GPIO when the alternate function is active. Keep the oscillator loop between the XTAL1 and XTAL2 pins short and free of switching-node routing to protect the 12 MHz timing margin.
Estimated: with the Z8 core running at 12 MHz and roughly 1 mA of active supply current typical of a CMOS 8-bit core, the digital current budget is about 12 mW at a 5 V rail. Add the load current of every port pin used as an output, since each port pin sources or sinks its own current and the total must stay inside the port drive capability quoted in the datasheet. Place a 100 nF ceramic decoupling capacitor at VDD with a bulk capacitor close to the supply pins, and keep the ground return of the DIP socket short to reduce supply bounce during port switching.
Impormasyon ng Pagsunod sa Kautusan
The device is described by Zilog as a cost-sensitive, high-volume consumer, automotive, security and HVAC part, but no explicit RoHS, REACH, AEC-Q100, lead-free or halogen-free declaration was located for this ordering code. Confirm the current declarations with the manufacturer before using the part in a regulated build.