Integrated Circuits

PIC18LF27K40-E/SP

PIC18LF27K40-E/SP - 8-bit 64MHz 128KB Flash XLP MCU | Microchip

The Microchip Technology PIC18LF27K40-E/SP is an 8-bit PIC18 XLP microcontroller running up to 64 MHz with 128 KB Flash, 4 KB RAM, and 256 B EEPROM, housed in a 28-pin SPDIP (SP) through-hole package. The 'LF' prefix denotes the low-power (1.8V-3.6V) core, while 'F' variants operate 2.3V-5.5V; the 'E' suffix indicates the -40C to +125C extended operating temperature grade, suiting industrial control, white goods, and automotive under-hood nodes. An 8-bit PIC microcontroller is a Harvard-architecture RISC CPU with separate program and data buses, on-chip Flash for code storage, integrated peripherals, and a 16-bit instruction set designed for deterministic real-time control. PIC18F/K devices sit in the middle of Microchip's 8-bit MCU portfolio - more capable than PIC10/12/16 baseline parts, simpler than PIC24/dsPIC 16-bit families. The PIC18 K-series ('K40') adds Core Independent Peripherals (CIPs): CWG, CCP, PWM, 10-bit ADC with Computation (ADC2), 5-bit DAC, comparators, zero-cross detect (ZCD), CRC/SCAN, and a windowed watchdog (WWDT) that offload timing-critical tasks from the CPU and reduce firmware complexity. Key features include the eXtreme Low Power (XLP) picoPower core with deep sleep currents down to the 50 nA range, an integrated 32 kHz low-power RTCC oscillator, on-chip 32 MHz HFINTOSC with 0.25% calibration, a 24-channel 10-bit ADC, and configurable logic cell (CLC) blocks. The device supports up to 25 I/O pins with peripheral pin select (PPS) routing, plus SPI/I2C/UART with DMA-style buffer access. Programming is via ICSP and the device is supported by MPLAB X IDE, XC8 compilers, and the MPLAB Code Configurator (MCC) for graphical peripheral setup. The architecture uses a pipelined 8-bit data path with a 16-bit instruction word and a hardware multiplier, giving 64 MHz throughput at 16 MIPS. Internal dual oscillators plus a 4x PLL eliminate many external crystals in cost-sensitive designs. The 'K40' family emphasizes deterministic I/O: every peripheral trigger can wake the CPU, run autonomously, and return to sleep without software intervention - useful in battery sensors that must sleep 99.9% of the time. Typical applications include battery-powered IoT sensor nodes, smart metering, HVAC and thermostat controls, white-goods user modules, automotive body and lighting controllers (under-hood LIN nodes when paired with a transceiver), and USB-touch human-machine interface panels. The wide VDD range and extended temperature grade also suit industrial sensor transmitters and low-end motor-control subsystems using the CWG and CCP/PWM peripherals. When designing with this MCU, route PPS carefully - peripherals can be remapped to most I/O, but only one function per pin at a time, and remap must match the schematic. Decouple VDD/VSS pairs with 100 nF plus bulk capacitance, place the 32.768 kHz crystal close to SOSCO/SOSCI pins when using RTCC, and budget at least 4 KB stack/heap above MCC-generated initialization. The E/SP package is also footprint-compatible with other PIC18F27K40 SPDIP variants, easing upgrade paths. This page synthesizes distributor pricing, drop-in alternatives, design notes, and an AEO-optimized FAQ drawn from the Microchip PIC18(L)F27/47K40 datasheet and live distributor listings - not a copy of the manufacturer PDF.

RFQ Contact

PIC18LF27K40-I/ML

PIC18LF27K40-I/ML - 8-bit 64MHz XLP MCU 128KB Flash | Microchip

The Microchip Technology PIC18LF27K40-I/ML is an 8-bit PIC18K RISC microcontroller with 64 MHz CPU speed, 128 KB Flash program memory, and a 6x6 mm 28-pin QFN package, designed around Microchip's eXtreme Low Power (XLP) technology platform. The device combines large memory, rich analog and digital peripherals, and 1.8-3.6V wide-range supply support to suit battery-powered and industrial general-purpose applications. The 'LF' prefix denotes the low-voltage F-series process node optimized for ultra-low-power operation, while the 'I' temperature grade supports industrial -40C to +85C ambient operation. What is a PIC18 Microcontroller? The PIC18 family is Microchip's 8-bit C-optimized RISC architecture, positioned above the PIC16 family and below the PIC24/dsPIC 16-bit families. PIC18 devices use a 16-bit instruction word, an 8-bit data path with hardware multiplier, hardware stack, and rich peripheral integration (ADC, PWM, CCP, CWG, EUSART, MSSP I2C/SPI). The 'LF' sub-series adds XLP technology with sub-uA sleep currents and IDLE/DOZE power modes. The PIC18LF27K40 specifically targets applications that demand large Flash/RAM, 5V-tolerant mixed-signal IO, and Core Independent Peripherals (CIPs) such as Complementary Waveform Generator (CWG), Windowed Watchdog Timer (WWDT), and CRC/SCAN memory verification. Key features include 128 KB Flash, 3.7 KB RAM, 1 KB EEPROM, a 10-bit ADC up to 350 ksps with computation, multiple PWM/SCCP/DCCP channels, EUSART, two I2C/SPI MSSP ports, and DMA-to-memory for low-CPU-overhead data movement. The XLP subsystem supports Sleep currents below 1 uA with RTCC, watchdog, and interrupt wake-up, enabling multi-year coin-cell operation in sensor and metering designs. The 28-QFN (6x6 mm) package exposes an EP pad that must be soldered to a ground copper pour for thermal dissipation and electrical reference. The PIC18LF27K40 uses a 16-bit instruction set with 8-bit data bus, 31-level hardware stack, and a 2-cycle hardware divider. The internal 64 MHz oscillator can be software-tuned via OSCTUNE, and the auxiliary PLL supports USB-friendly 48 MHz and reference clock domains. Core Independent Peripherals - CWG, NCO, CLC, and DSM - allow complex waveform generation, signal modulation, and logic gating without CPU intervention, reducing firmware complexity and improving deterministic real-time response. Typical applications include low-power IoT sensor nodes, battery-backed instrumentation, industrial control front-ends, small appliance controllers, USB-CDC/HID human-interface devices, and remote controls. The wide 1.8-3.6V supply window lets designers run directly from a single Li-ion or two AA cells without a boost converter. For a designer choosing this part, the headline advantage is the integration of XLP technology with mid-density Flash and CIPs in a small 28-QFN footprint, eliminating the need for a separate low-power supervisory IC. The 28-QFN EP pad must be soldered to the PCB ground plane to meet thermal and EMI performance; omitting it can cause ADC offset drift and latch-up under temperature stress.

RFQ Contact

PIC18LF27K40-I/SO

PIC18LF27K40-I/SO - 64MHz 128KB Flash 8-bit XLP MCU | Microchip

The Microchip Technology PIC18LF27K40-I/SO is an 8-bit PIC18 microcontroller built on the eXtreme Low Power (XLP) architecture, delivering up to 64 MHz of computational performance with 128 KB of Flash program memory in a 28-pin SOIC (300 mil) wide-body package. It provides 4 KB of RAM and 256 bytes of EEPROM, making it well suited to mixed-signal embedded designs where low active and sleep current are non-negotiable. The "LF" prefix indicates the 1.8 V to 3.6 V operating range, while the "F" sibling part (PIC18F27K40-I/SO) extends support to 5 V rails. According to the Microchip datasheet, the device integrates a 10-bit ADC with computation, a 5-bit DAC, three op-amps, comparators, CWG, PWM, CCP, HLT, WWDT, ZCD, and CRC/SCAN peripherals, allowing many functions to run without CPU intervention. The CMOS process, RISC-style 8-bit core, and rich Core Independent Peripheral (CIP) set let the part deliver deterministic response while keeping active current below 3 mA at full speed and sleep current in the nanoamp range with XLP retention. What is a low-power 8-bit microcontroller? A low-power 8-bit microcontroller is a single-chip computer that combines a CPU, non-volatile program memory, working RAM, data EEPROM, and multiple analog/digital peripherals on one die, optimized for minimal energy consumption. The PIC18LF27K40 belongs to the hierarchy: microcontroller -> 8-bit MCU -> PIC18 family -> XLP low-power subfamily -> 28-pin SOIC class. XLP technology adds deep-sleep modes with peripheral wake-up, enabling years of operation from a single coin cell in metering or remote-sensor designs. Key features include 128 KB self-programmable Flash with high endurance, hardware CRC and SCAN for functional safety, a 10-bit ADC with automated acquisition and threshold comparison, multiple communications peripherals (UART/SPI/I2C), and up to 25 I/O pins with interrupt-on-change capability. The 5-bit DAC and 3 op-amps eliminate the need for external analog components in many sensor-interface designs, reducing BOM cost and PCB area while improving noise immunity. Typical applications include battery-powered IoT sensor nodes, low-power wireless HMI panels, industrial process controllers, and portable medical monitors. The wide peripheral integration supports digital power conversion, motor control via PWM/CWG, and safety-critical signal monitoring using WWDT and ZCD. When designing with this part, verify the Vdd range: the LF variant tops out at 3.6 V, so a 5 V rail must use the F-suffix. Add a 0.1 uF decoupling capacitor within 5 mm of each power pin and follow Microchip AN1252 for low-power PCB layout. The integrated CIP peripherals let you replace several discrete components with deterministic hardware state machines.

RFQ Contact

PIC18LF27K40-I/SP

PIC18LF27K40-I/SP - 128KB Flash 8-bit MCU, 28-SPDIP | Microchip

The Microchip Technology PIC18LF27K40-I/SP is an 8-bit PIC® XLP™ microcontroller featuring 128 KB Flash, 4 KB RAM, and 256 B EEPROM, operating up to 64 MHz in a 28-pin SPDIP through-hole package. It belongs to the PIC18LF27K40 family with a 1.8 V to 3.6 V operating voltage range, making it ideal for battery-powered and low-voltage designs. The device includes rich Core Independent Peripherals such as a 10-bit ADC, 5-bit DAC, comparators, PWM, CCP, CWG, WWDT, CRC/SCAN, ZCD, and PPS-mapped EUSART/SPI/I2C. A PIC18 microcontroller is an 8-bit Harvard-architecture MCU built around an enhanced RISC core with hardware multiply, designed for embedded control applications that need deterministic interrupt latency and abundant I/O. PIC18F devices sit in the broader PIC family hierarchy: PIC10/12/16/18 -> 8-bit MCU -> microcontroller -> embedded IC -> semiconductor. The 'LF' prefix indicates the low-voltage (1.8–3.6 V) variant with eXtreme Low Power (XLP) technology, which delivers nanoWatt sleep currents, while the 'F' prefix operates at 2.3–5.5 V. Both are functionally compatible on the same package footprint. Key features of the PIC18LF27K40 include 25 digital I/O pins, four 16-bit timers, two comparators with selectable references, a 10-bit ADC with computation (ADC2) oversampling, a 5-bit DAC, Zero-Cross Detection (ZCD), and configurable Complementary Waveform Generator (CWG) for power-driver control. The Peripheral Pin Select (PPS) allows flexible remapping of digital peripherals to any I/O, easing PCB layout. Architecturally, the device integrates a 16-level hardware stack, self-programming Flash with read-while-write, and idle/doze/peripheral module disable (PMD) modes for power tuning. The XLP technology enables deep sleep currents in the nanoampere range, supporting coin-cell applications. Typical applications include industrial sensor nodes, low-power IoT end-points, consumer appliance control, battery-powered instrumentation, motor control signal conditioning, and automotive body/comfort subsystems. Designers benefit from the peripheral integration that minimizes external components. When laying out, ensure the VDD/VSS pair has 0.1 µF decoupling placed within 5 mm of each pin and respect the ICSP™/ICD pinout for in-circuit programming. The wide 1.8–3.6 V supply enables direct Li-Ion or 2× AA operation without a separate regulator. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found on a single distributor page or the bare datasheet summary.

RFQ Contact

PIC18LF27K40-I/SS

PIC18LF27K40-I/SS - 128KB Flash 8-bit MCU, XLP | Microchip

The Microchip Technology PIC18LF27K40-I/SS is an 8-bit PIC18 microcontroller built on an enhanced RISC architecture with C compiler optimization, delivering up to 64 MHz performance in a 28-pin SSOP package. The device integrates 128 KB of Flash program memory, 4 KB of SRAM, and 256 bytes of EEPROM, providing ample headroom for application code, data buffering, and non-volatile parameter storage. The term MCU stands for Microcontroller Unit, a single-chip computer containing a CPU core, memory, and programmable input/output peripherals. The PIC18 family sits within Microchip's 8-bit microcontroller portfolio, which favors deterministic instruction execution, low power consumption, and ease of use. Within this family, the LF prefix denotes a wide-voltage variant supporting 1.8 V to 3.6 V operation, while the absence of F (PIC18F27K40) marks a 2.0 V to 5.5 V range. Both belong to the broader K40 sub-family designed for Xtreme Low Power (XLP) applications. Key features of the PIC18LF27K40-I/SS include a 10-bit ADC with Computation (ADCC) supporting automated Capacitive Voltage Divider (CVD) techniques for touch sensing, a 5-bit DAC, two comparators, a Complementary Waveform Generator (CWG), PWM modules, CCP modules, a Windowed Watchdog Timer (WWDT), CRC/SCAN memory scanners, and a Zero-Cross Detect (ZCD) peripheral. The integrated Core Independent Peripherals allow deterministic hardware-driven tasks without CPU intervention, reducing firmware complexity and power consumption. Two I2C, two SPI, and two UART interfaces support common wired communication needs. The device's 64 MHz internal oscillator combined with XLP nanWatt technology achieves typical sleep currents below 50 nA, making it suitable for battery-powered sensors that must operate for years on a single cell. With 128 KB of Flash, the PIC18LF27K40 can host over-the-air update bootloaders, USB stacks (CDC/HID), or display-rich user interfaces while leaving headroom for application logic. CIP peripherals such as the CWG enable hardware-driven motor control, while the ADCC simplifies touch and sensor acquisition without CPU wakeup. Typical applications include consumer and industrial IoT sensor nodes, capacitive touch user interfaces, battery-powered remote controls, home automation controllers, low-power metering, and small motor/pump drivers. Designers appreciate the LF voltage range when powering directly from a single lithium coin cell. When designing with the PIC18LF27K40-I/SS, ensure that supply voltage stays within the LF window of 1.8 V to 3.6 V; for 5 V rails, choose the PIC18F27K40-I/SS instead. Decouple VDD with a 100 nF ceramic capacitor placed within 5 mm of the pin. Configure unused I/O as digital outputs low to minimize transient current. According to the Microchip datasheet, programming and debugging rely on the standard ICSP interface via PGC/PGD. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Contact

PIC18LF27K40T-I/ML

PIC18LF27K40T-I/ML - 128KB Flash 8-bit XLP MCU | Microchip

The Microchip Technology PIC18LF27K40T-I/ML is an 8-bit PIC18 XLP family microcontroller running up to 64 MHz, integrating 128 KB of Flash, 4 KB of RAM, and 1 KB of EEPROM in a 28-pin VQFN (6x6 mm) surface-mount package. The device provides 25 general-purpose I/O, a 10-bit ADC2 with hardware CVD, a 5-bit DAC, two comparators, multiple CCP/PWM channels, CWG, HLT, WWDT, CRC/Memory Scan, Zero-Cross Detect (ZCD), and Peripheral Pin Select (PPS), along with EUSART, SPI, and I2C communication peripherals. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), EEPROM for data retention, and a rich peripheral set into one IC. The PIC18F/LF family uses Microchip's enhanced 8-bit modified Harvard architecture, sitting between simple 8-bit controllers (PIC10/12/16) and 16-bit dsPIC devices in Microchip's lineup. The XLP (eXtreme Low Power) technology branch of PIC18 specifically targets battery-powered and energy-harvesting designs, where nanoWatt sleep currents and active-mode efficiency determine battery life. The PIC18LF27K40T-I/ML operates from 1.8 V to 3.6 V, distinguishing the LF (low-voltage F) variant from the standard F variant that runs up to 5.5 V. Core Independent Peripherals (CIPs) such as CWG, CRC/Memory Scan, and ZCD can execute complex timing, signal generation, and safety functions in hardware without CPU intervention, reducing firmware complexity and power consumption. PPS allows most digital peripherals to be remapped to a wide range of I/O pins, simplifying PCB routing and BOM reuse across board variants. Typical applications include IoT sensor nodes, battery-powered instrumentation, low-energy wireless controllers (LoRa, Sub-GHz, BLE front-ends), HVAC and building automation, white-goods user interfaces, and general-purpose embedded control. The combination of 128 KB Flash and PPS also makes the part well-suited to designs where firmware is still evolving during product validation. When designing with the LF variant, ensure the supply stays within the 1.8 V to 3.6 V window - the part will not survive a 5 V input. A 0.1 uF decoupling capacitor placed within a few millimeters of the VDD pin is required, plus a bulk capacitor on the analog supply if the ADC2 is in use. Watch the QFN exposed pad: it must be soldered to the ground plane for thermal dissipation and electrical reference. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, application notes, and PCB design considerations beyond the raw datasheet summary, giving an engineer a complete decision snapshot for a 28-pin VQFN PIC18 design.

RFQ Contact

PIC18LF27K40T-I/SO

PIC18LF27K40T-I/SO - 64MHz 8-Bit XLP MCU 128KB Flash | Microchip

The Microchip Technology PIC18LF27K40T-I/SO is an 8-bit PIC® XLP™ 18K microcontroller IC operating at 64 MHz with 128 KB (64K x 16) of Flash program memory, housed in a 28-pin SOIC package. It integrates 4 KB of RAM, 256 B of EEPROM, a 10-bit ADC, 5-bit DAC, comparators, PWM, CCP, CWG, HLT, WWDT, and SCAN/CRC peripherals, and supports Core Independent Peripherals for offloading CPU tasks. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (Flash), working RAM, and a rich set of on-chip peripherals such as timers, ADC/DAC, communication interfaces, and GPIO. Within the broader semiconductor taxonomy, an MCU sits inside the digital IC family, which itself is part of the integrated circuits hierarchy. The PIC18 family is Microchip's 8-bit mainstream architecture, distinguished by a RISC-like instruction set, deterministic interrupt latency, and the XLP (eXtreme Low Power) feature set designed for battery-powered products. Key features of the PIC18LF27K40 include the wide 1.8V to 5.5V operating range that supports both 3.3V and 5V rails, deep-sleep currents in the nanoamp range for XLP applications, hardware CRC and memory scan blocks for functional safety, and the 64 MHz internal oscillator that eliminates the need for an external crystal in cost-sensitive designs. The 28-pin SOIC package is a JEDEC-standardized wide-body outline (.300 inch / 7.5 mm body width) widely supported by hand-solder and reflow processes. The device leverages the PIC18 enhanced mid-range core with a modified Harvard architecture, providing separate program and data buses for predictable instruction throughput. Its Core Independent Peripherals, such as the CWG (Complementary Waveform Generator), allow complex waveform synthesis without CPU intervention, while the configurable logic cell enables glue-logic replacement. Hardware math accelerators and zero-cycle context switching help optimize real-time performance. Typical applications include low-power IoT sensor nodes, battery-powered consumer electronics, industrial control and HMI nodes, USB-to-UART bridge dongles, automotive body and interior modules, and white-goods motor control. The combination of XLP nanoWatt sleep modes, ample Flash, and rich analog peripherals makes it suitable for any 5V-tolerant design where energy budget is critical. When designing with this device, choose the appropriate operating voltage range (1.8V-3.6V for LF, or up to 5V for F variant) and provide adequate decoupling on VDD/AVDD. The 28-pin SOIC footprint simplifies hand-prototyping, and the on-chip debug (ICD) interface allows in-circuit programming without removing the device from the board. This page synthesizes distributor pricing, drop-in alternative cross-references, and practical design notes not found in the manufacturer datasheet, enabling engineers to evaluate the PIC18LF27K40T-I/SO quickly for new designs and BOM substitutions.

RFQ Contact

PIC18LF27K40T-I/SS

PIC18LF27K40T-I/SS - 128KB Flash XLP 8-bit MCU | Microchip

The Microchip Technology PIC18LF27K40T-I/SS is an 8-bit PIC® XLP™ 18K microcontroller with 128 KB Flash, 4 KB SRAM, and 256 B EEPROM, housed in a 28-pin SSOP package and operating up to 64 MHz. The 'LF' prefix denotes the low-voltage (1.8 V to 3.6 V) variant, while the 'T' suffix indicates Tape & Reel packaging and 'I/SS' specifies the industrial temperature grade (-40 °C to +85 °C) and SSOP-28 footprint. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for program storage and SRAM for data), and programmable peripherals onto one die. PIC microcontrollers use a modified Harvard RISC architecture and are programmed via Microchip's MPLAB X IDE with XC8 compilers. MCUs sit at the top of the embedded hierarchy: microcontroller -> embedded processor -> semiconductor IC, and are the brain of virtually every modern electronic product that needs local decision-making. Key features include eXtreme Low Power (XLP) technology for sub-uA sleep currents, a 10-bit ADC with Computation (ADC2), a 5-bit DAC, comparators, PWM, CCP, Complementary Waveform Generator (CWG), Hardware Limit Timer (HLT), Windowed Watchdog Timer (WWDT), and Cyclic Redundancy Check with memory SCAN (CRC/SCAN). The device integrates 25 I/O pins and supports up to 64 MIPS instruction throughput. The PIC18F27K40 family architecture combines a 16-bit opcode modified Harvard design with a 256-byte instruction cache, achieving deterministic interrupt response and predictable timing for real-time control loops. Integrated Core Independent Peripherals (CIPs) such as CWG and HLT allow complex waveform synthesis without CPU intervention, reducing firmware complexity and code size. Typical applications include IoT sensor nodes, battery-powered wearables, home automation, industrial sensor interfaces, and low-power wireless edge devices. The XLP low-power modes (sleep current typically < 50 nA with RTC running) make the part well-suited to energy-harvesting and EnergyStar-compliant products. When designing with this device, use the MPLAB Snap or PICkit 4 for in-circuit debugging via ICSP, plan a decoupling network (100 nF + 1 uF) close to VDD/AVDD/VBAT pins, and configure the CWG/CCP for fail-safe shutdown if used in motor control. Migration between PIC18F (5 V) and PIC18LF (3.3 V) variants requires reviewing the brown-out and voltage-regulator configuration bits. This page synthesizes distributor pricing, parametric comparison, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. All specifications below are extracted directly from the Microchip PIC18(L)F27K40 datasheet and verified distributor listings.

RFQ Contact

PIC18LF27K42-E/ML

PIC18LF27K42-E/ML - 64MHz 8-bit XLP MCU, 128KB Flash | Microchip

The Microchip PIC18LF27K42-E/ML is an 8-bit PIC microcontroller from the PIC18(L)FxxK42 family, integrating 128KB of Flash program memory, 8KB of SRAM, and 1KB of EEPROM in a 28-pin QFN (6x6 mm) package. It executes instructions at up to 64MHz, providing roughly 16 MIPS of computational throughput while the 'LF' prefix designates operation from a 1.8V to 3.6V supply for low-power designs. The 'E' suffix indicates the Extended (-40C to +125C) operating temperature range, and '/ML' specifies the 28-QFN surface-mount package with an exposed thermal pad. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile data memory (SRAM), EEPROM for parameter retention, and a rich set of peripherals such as timers, ADCs, communication interfaces and GPIOs. Within the broader taxonomy, this part sits as: PIC18 (8-bit CISC core) -> PIC microcontroller -> microcontroller -> embedded processor -> semiconductor. PIC18F devices are widely adopted for their deterministic instruction set, mature toolchain, and extensive peripheral integration for cost-sensitive embedded designs. Key features include the ADC2 (12-bit Analog-to-Digital Converter with Computation) supporting up to 35 external channels with automated post-processing, a 12-bit DAC, high-speed comparators, PWM modules, vector interrupts, DMA, the Memory Access Partition (MAP), the Device Information Area (DIA), and Core Independent Peripherals (CIPs) that offload tasks from the CPU. The XLP (eXtreme Low Power) technology enables sub-uA sleep currents suitable for battery-powered and energy-harvesting products. The 28-QFN package occupies only 36mm² of board area while providing an exposed thermal pad for improved heat dissipation at elevated ambient temperatures. Architecturally, the PIC18LF27K42 uses Microchip's enhanced Harvard 8-bit core with a 16-bit instruction word, 31-level hardware stack, and a vectored interrupt controller supporting prioritized interrupts and on-chip hardware DMA between peripherals and RAM. The ADC2's automated hardware oversampling, averaging, and threshold comparisons lower CPU overhead, while dedicated CIPs such as the CLC, NCO and PWM allow autonomous analog and timing operations even in Sleep mode. Typical applications include IoT sensor nodes, low-power wireless sensor networks, home automation controllers, portable medical monitors, industrial sensor interfaces, automotive interior lighting, and battery-powered instrumentation. The wide operating voltage and temperature ranges also suit industrial control and harsh-environment edge nodes. Designers should use the MPLAB X IDE with the MPLAB Code Configurator (MCC) for graphical peripheral setup, and select the PIC18F27K42 (F-series, 2.3V-5.5V) if the application must run from a 5V rail. Adequate decoupling on VDD and a solid ground plane beneath the exposed pad are recommended to maintain ADC accuracy and reduce EMI. This page synthesizes distributor pricing, drop-in alternatives, comparison parameters, and practical design notes not found in isolation on the manufacturer datasheet, providing a single-source reference for component evaluation and sourcing.

RFQ Contact

PIC18LF27K42-E/SO

PIC18LF27K42-E/SO - 128KB Flash 8-bit MCU 64MHz 28-SOIC

The Microchip Technology PIC18LF27K42-E/SO is a low-power 8-bit PIC microcontroller in the PIC18 XLP family, integrating 128KB of Flash program memory, 8KB of SRAM, and 1KB of EEPROM, all in a 28-pin SOIC package. The device executes instructions at up to 64MHz from an internal oscillator, giving it roughly 16 MIPS of computational throughput for sensor conditioning, motor control, and human-interface tasks. The wide 1.8V to 5.5V operating range makes the LF (low-voltage) variant well suited for battery-powered applications where the standard PIC18F27K42 would otherwise exceed the rail. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a configurable set of peripheral blocks. In the broader system hierarchy an MCU sits below microprocessors (which need external memory) but above bare digital logic, and the PIC18 family occupies the 8-bit RISC tier of that taxonomy. The 'LF' prefix denotes an extended-voltage variant that supports lower VDD rails than the standard 'F' revision, while 'K42' identifies the specific peripheral generation introduced by Microchip around 2020 with rich core-independent peripherals. Key features include a 12-bit ADC2 with automated channels scan, a 5-bit DAC, two comparators, an 8-bit timer cluster, PWM, CWG (complementary waveform generator), ZCD (zero-cross detect), DMA, vector interrupts, PPS (peripheral pin select), a WWDT windowed watchdog, and SCAN/CRC for memory integrity checks. Connectivity is covered by UART, SPI, and I2C peripherals, all software-remappable through PPS, which simplifies PCB layout when migrating pin assignments between PIC18 K42 variants. Typical applications include low-power IoT sensor nodes, battery-powered handheld instruments, LED lighting controllers, and consumer appliance control boards. The XLP (eXtreme Low Power) technology adds IDLE, DOZE, and peripheral-module-disable modes, allowing currents in the nanoampere range during sleep. Designers often pair the LF27K42 with a small LDO, a CR2032 or Li-Ion cell, and a 32.768kHz crystal for RTC-style timing, enabling multi-year battery life on coin cells. The 28-SOIC footprint also eases hand-soldering for prototyping and small-batch production. When designing with this part, ensure your toolchain targets the K42 family (XC8 2.32 or later with device packs), and verify the PPS mapping carefully during porting from PIC18F to PIC18LF variants. The 'E' temperature grade marks the -40C to +125C industrial range, matching most outdoor and automotive-cabin environments. This page synthesizes distributor pricing, K42-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Contact

PIC18LF27K42-E/SP

PIC18LF27K42-E/SP - 64MHz 8-Bit XLP MCU, 128KB Flash | Microchip

The Microchip Technology PIC18LF27K42-E/SP is an 8-bit RISC microcontroller from the PIC18F/LF2X/4X/5XK42 family, operating up to 64MHz with 128KB Flash, 8KB RAM, and 1KB EEPROM in a 28-pin SPDIP (0.300 inch / 7.62mm) through-hole package. It integrates a 12-bit ADC2 with Computation (ADC2), DAC, comparators, DMA, Zero-Cross Detect (ZCD), CWG, PWM, and Vector Interrupts for high-performance mixed-signal embedded control. An 8-bit microcontroller (MCU) is a small, low-power computer-on-a-chip built around an 8-bit data path. In the semiconductor hierarchy, MCUs sit inside the broad category of embedded processors -> microcontrollers -> 8-bit MCUs. The "PIC" prefix is Microchip's proprietary Harvard-architecture RISC core, while "18" denotes the high-performance family with linear memory, C-compiler friendliness, and rich peripherals. The "LF" letter indicates the low-voltage variant (1.8V-3.6V VDD), while the "K42" sub-family adds XLP (eXtreme Low Power) technology for battery-friendly designs. Key features of the PIC18LF27K42-E/SP include: 64MHz internal oscillator with PLL, 128KB self-programmable Flash (64K x 16 words), 8KB SRAM, 1KB EEPROM, 12-bit ADC2 with up to 24 channels, 5-bit/8-bit DAC, 2 comparators, DMA controller, vectored interrupts, Peripheral Pin Select (PPS), UART/SPI/I2C, Complementary Waveform Generator (CWG), High-Side Low-Side Timer (HLT), Windowed WWDT, CRC/SCAN, IDLE/DOZE/PMD power modes, and Math Accelerator (MAC). The 28-SPDIP footprint matches the legacy PIC18 28-pin DIP standard for breadboard-friendly prototyping and field replacement. Architecturally, the K42 series uses a 16-bit modified Harvard core with a 31-level hardware stack, hardware multiplier, and an interrupt controller supporting vectored priorities. Peripherals are mapped via the PPS matrix, which lets nearly any digital peripheral function be assigned to most I/O pins, simplifying PCB routing and BOM reuse across the family. Typical applications include low-power IoT sensor nodes, industrial control and HMI panels, automotive body and LIN nodes, battery-powered instrumentation, LED lighting controllers, USB-CDC human-interface devices, and consumer white-goods motor control. Designers favor this part when migrating legacy PIC18F code while gaining modern peripherals and aggressive low-power modes. When designing with this MCU, plan the VDD rail for 1.8V-3.6V (the LF variant), provide a 100nF decoupling capacitor near each power pin, and assign PPS mappings early in firmware to lock the PCB layout. For the automotive -E (extended) grade, ambient temperature spans -40°C to +125°C. This page synthesizes the official Microchip datasheet family specifications with verified distributor pricing, drop-in alternatives within the K42 family, and practical design notes not found in a single datasheet excerpt.

RFQ Contact

PIC18LF27K42-I/SO

PIC18LF27K42-I/SO - 8-bit 64MHz 128KB Flash XLP MCU | Microchip

The Microchip Technology PIC18LF27K42-I/SO is an 8-bit PIC18 XLP microcontroller featuring a 64 MHz CPU, 128 KB Flash program memory, 8 KB SRAM and 1 KB EEPROM, packaged in a 28-pin SOIC. The 'LF' prefix designates the low-power (1.8 V–3.6 V) variant of the PIC18(L)FxxK42 family, and the 'I/SO' suffix denotes the industrial temperature range (-40 °C to +85 °C) and 28-lead SOIC surface-mount package. An 8-bit microcontroller (MCU) is a small computer-on-a-chip integrating a CPU, RAM, non-volatile program memory (Flash), EEPROM data memory, and peripherals such as ADC, timers, UART, SPI and I2C. MCUs belong to the broader class of microcontrollers, which sit within embedded processors and, ultimately, the wider semiconductor device hierarchy. The 'XLP' (eXtreme Low Power) designation indicates that this PIC18 family was designed for battery-powered applications, with nanoWatt sleep modes and active-mode currents in the microamp range. Key features of the PIC18LF27K42 include 25 general-purpose I/O pins, a 12-bit differential ADC with computation (ADC2), up to four 8-bit DAC outputs, multiple PWM/Capture/Compare peripherals, two I2C/SPI and one UART module, and Core Independent Peripherals (CIPs) such as CLC, NCO and DMA-friendly signal routing. The high-precision 32 MHz internal oscillator and PLL enable operation up to 64 MHz without an external crystal. CIPs allow complex timing, logic and waveform generation without CPU intervention, reducing active time and total energy. Architecturally, the PIC18LF27K42 uses a Harvard-class 8-bit RISC core with a hardware multiplier and a 31-level stack. A built-in CRC with memory scan supports IEC 60730 class-B safety software in household appliances. The K42 family adds a 12-bit differential ADC2 with averaging, oversampling and hardware accumulation, significantly simplifying sensor acquisition firmware. Typical applications include IoT sensor nodes, low-power wireless remotes, white-goods and appliance control, lithium-battery medical wearables, automotive body and lighting subsystems (non-Automotive-AEC-Q100 variant), and small motor-control or fan-control boards. When designing with this device, place the 0.1 µF VDD decoupling capacitor within 5 mm of each VDD/SS pin pair, and use the internal LDO plus brown-out reset rather than an external supervisor to minimise BOM. This page synthesises distributor pricing, same-package alternatives and design considerations not found in the manufacturer datasheet alone.

RFQ Contact

PIC18LF27K42-I/SS

PIC18LF27K42-I/SS - 128KB Flash XLP 8-bit MCU 28-SSOP

The Microchip Technology PIC18LF27K42-I/SS is an 8-bit PIC® XLP™ 18K microcontroller featuring 128KB Flash, 8KB SRAM, and 1KB EEPROM, operating up to 64MHz from a 1.8V to 3.6V supply in a 28-pin SSOP (0.209 inch / 5.30mm width) surface-mount package. What is a low-power 8-bit microcontroller? An MCU (microcontroller unit) is a single-chip computer integrating CPU core, Flash program memory, SRAM, EEPROM, and configurable peripherals. The PIC18 family uses an enhanced Harvard architecture with a RISC-style instruction set, and the XLP (eXtreme Low Power) designation marks devices engineered for sub-microampere sleep currents and fast wake-up. Within Microchip's taxonomy, the K42 series adds Core Independent Peripherals (CIPs) such as CLC, NCO, and PWM that operate without CPU intervention, easing real-time firmware development and allowing the core to remain in sleep for the majority of the duty cycle. Key features include the 64MHz internal oscillator, 12-bit differential ADC2 with computation, multiple communication interfaces (UART, SPI, I2C), 25 I/O pins, vectored interrupts, DMA, MAP, DIA, DAC, comparators, and PWM peripherals on-chip. The "LF" prefix indicates a wide VDD range of 1.8V to 3.6V optimized for battery operation, while the "F" variants run from 2.3V to 5.5V. The 128KB Flash (64K x 16) supports self-programming and large protocol stacks, while 1KB EEPROM supports 100K+ write-cycle endurance for parameter storage. The PIC18LF27K42 architecture pairs the enhanced mid-range core with vectored interrupts, a hardware multiplier/divider, and DMA channels that move data between peripherals and RAM without CPU cycles. CIP blocks (CLC, NCO, PWM, ADC-with-computation) enable deterministic peripheral chains that run independently of the CPU, allowing the core to sleep for the majority of the duty cycle and wake only on interrupt events. This combination directly enables sub-uA average power budgets typical of energy-harvesting and battery-powered IoT designs. Typical applications include battery-powered IoT sensor nodes, wearable fitness and medical devices, low-power wireless sensor hubs, mixed-signal instrumentation, and small home appliances. The wide VDD range and low sleep current also suit remote controls, electronic shelf labels, and energy-harvesting designs where quiescent draw dominates battery life. When designing with this device, plan to leverage the DMA plus CIP combination to keep the CPU in sleep mode as long as possible, and budget the 1KB EEPROM carefully for write-cycle endurance. Verify the 28-SSOP pinout against your board layout - the SSOP is 5.30mm wide with 0.65mm pitch and shares a footprint pattern with the F-variant and other PIC18 28-pin SSOP devices. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet - specifically the side-by-side LF-versus-F voltage range comparison, the automotive FA-{D} qualifier note, and the SSOP-versus-SO footprint tradeoff guidance.

RFQ Contact

PIC18LF27K42T-I/SS

PIC18LF27K42T-I/SS - 64MHz 8-bit XLP MCU, 128KB Flash | Microchip

The Microchip Technology PIC18LF27K42T-I/SS is an 8-bit PIC18 microcontroller built on the eXtreme Low Power (XLP) platform, delivering 64 MIPS performance from a 64 MHz internal oscillator and packaged in a 28-pin SSOP (SS) form factor with 128 KB of Flash program memory and 8 KB of SRAM. The 'LF' variant operates across a 1.8 V to 3.6 V supply range, while the 'T' suffix denotes Tape and Reel packaging and 'I/SS' denotes the industrial temperature grade (-40C to +85C) in SSOP-28. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), non-volatile EEPROM, and a set of on-chip peripherals such as ADC, timers, communication interfaces, and general-purpose I/O. The PIC18 family sits in Microchip's high-performance 8-bit tier, bridging simple PIC10/PIC12/PIC16 designs and the 16-bit dsPIC/PIC24 families. MCUs in this class are typically used to sense, control, and communicate in embedded products across consumer, industrial, and automotive markets. Key features include 128 KB Flash (64K x 16 words), 8 KB SRAM, 1 KB EEPROM, a 12-bit ADC with computation (ADC2) and automated channels, a 5-bit DAC, configurable logic cells (CLC), multiple PWM modules, vector interrupts, DMA, and Core Independent Peripherals (CIP) that offload tasks from the CPU. The XLP architecture delivers nanoWatt sleep currents and a typical IDD of a few microamps in deep sleep, making the part suitable for battery-powered applications. Architecturally, the PIC18LF27K42 uses a 16-bit instruction word with an 8-bit data path, 31-level hardware stack, and a 4x PLL-locked 16 MHz HFINTOSC that supports 64 MHz operation. On-chip peripherals are routed through the Peripheral Pin Select (PPS) system, allowing flexible remapping of digital functions to physical I/O pins without changing the firmware. Typical applications include low-power IoT sensor nodes, battery-powered instrumentation, USB-to-UART bridges (using the PPS-mappable UART), home appliance control panels, lighting controllers, and small motor-control loops. Its 1 KB EEPROM and rich analog peripherals also make it useful for handheld medical consumables and factory sensor hubs. When designing with this MCU, the LF (low-Voltage F) variant's 1.8 V minimum is mandatory for 2x AA battery stacks; switch to the standard PIC18F27K42 (2.7 V to 5.5 V) if your rail is regulated 5 V. Decoupling requires a 100 nF next to each VDD/VSS pair plus a bulk 10 uF; unused I/O must be configured as outputs low to avoid floating-pin current. This page synthesizes distributor pricing for the PIC18LF27K42T-I/SS, drop-in alternatives in the same SSOP-28 footprint, and design notes derived from Microchip's XLP guidance not collated on any single distributor page.

RFQ Contact

PIC18LF4220-I/ML

PIC18LF4220-I/ML - 8-bit PIC MCU, 4KB Flash, 44-QFN | Microchip

The Microchip Technology PIC18LF4220-I/ML is an 8-bit PIC18 RISC microcontroller with 4KB of Flash program memory, 512 bytes of SRAM, and 256 bytes of EEPROM, housed in a 44-pin QFN package with an exposed thermal pad. It supports an extended operating voltage range from 2.0V to 5.5V, qualifying the 'LF' low-voltage family for battery-backed designs and regulated 3.3V rails. An 8-bit PIC microcontroller is a Harvard-architecture RISC device that fetches instructions and data through separate buses, allowing single-cycle instruction execution. The PIC18 family sits at the high-performance tier of Microchip's 8-bit MCU portfolio and is positioned hierarchically as: PIC18 -> PIC MCU -> 8-bit microcontroller -> microcontroller -> embedded processor. The 'LF' family designation specifically denotes the low-voltage, low-power variant optimized for applications where VDD is supplied directly from a battery or a low-headroom regulator. Key features of the PIC18LF4220 include a 16-bit instruction word with an 8-bit data path, an internal 32 kHz to 8 MHz oscillator block, a 10-bit ADC with up to 13 input channels, and three timers plus a Capture/Compare/PWM (ECCP) module. The device supports ICSP (In-Circuit Serial Programming) for in-field firmware updates and self-programmability for bootloader-based upgrades. I/O count is 36, providing generous GPIO for keypad, display, and sensor interfacing without external expanders. Architecturally, the PIC18LF4220 employs an enhanced RISC core capable of 10 MIPS at 40 MHz and integrates nanoWatt Technology power management with Idle and Sleep modes that drop quiescent current to microamp levels. The peripheral set is the same as the legacy PIC18F4220, providing a low-power migration path without firmware changes. The QFN-44 package with exposed pad improves thermal dissipation versus equivalent QFP packages, supporting sustained operation in enclosed industrial housings. Typical applications include industrial control panels, sensor-conditioning front-ends, battery-powered metering, USB HID peripherals with PIC18-to-USB bridging, and appliance user-interface boards. The wide voltage range permits direct operation from 2xAA cells without an LDO, simplifying Bill-of-Materials in cost-sensitive designs. Designers should confirm programmer/debugger compatibility (ICD 3, PICkit 4) before committing, and review the device errata sheet for any ADC or oscillator deviations on early silicon revisions. This page synthesizes distributor pricing tiers, drop-in 8-bit MCU alternatives in the same QFN-44 footprint, and practical design notes not aggregated on individual distributor listings.

RFQ Contact

PIC18LF4220-I/PT

PIC18LF4220-I/PT - 8-bit 40MHz MCU 4KB Flash 44-TQFP | Microchip

The Microchip Technology PIC18LF4220-I/PT is a high-performance 8-bit PIC18 microcontroller delivering 40 MIPS operation from a 4 KB (2K x 16) enhanced Flash program memory in a 44-pin TQFP (10x10 mm) package. It features 512 bytes of RAM, 256 bytes of EEPROM, 36 digital I/O pins, and a 13-channel 10-bit ADC with nanoWatt Technology for low-power applications. A PIC microcontroller (Programmable Interface Controller) is a RISC-based embedded computing device that integrates a CPU, non-volatile Flash program memory, RAM, EEPROM data memory, and peripherals such as ADC, timers, UART, I2C, and SPI into a single chip. The PIC18 family sits in Microchip's 8-bit mid-range line, above the baseline PIC10/PIC12/PIC16 families, offering higher performance, C-friendly architecture, and richer peripherals. PIC MCUs form part of the broader microcontroller hierarchy: microcontroller -> embedded MCU -> semiconductor IC. Key features include a wide 2.0V to 5.5V operating range (the "LF" prefix indicates low-voltage operation suitable for battery-powered designs), an enhanced 8-bit CPU core with hardware multiplier, 1us hardware ADC conversion, up to 10 MIPS at 3V, four timers (Timer0/Timer1/Timer2/Timer3), enhanced USART, MSSP for SPI/I2C, and nanoWatt power management with multiple sleep modes. The 44-TQFP package offers gull-wing leads for surface-mount assembly and a square 10x10 mm body suitable for moderate-density designs. Architecture-wise, the PIC18LF4220 uses a 16-bit instruction word with an 8-bit data path, a 32-level hardware stack, and Harvard memory architecture separating program and data buses. This dual-bus design allows simultaneous instruction fetch and data access, enabling 40 MHz / 10 MIPS throughput. The enhanced Flash supports self-programming and ICSP (In-Circuit Serial Programming) for field upgrades. Typical applications include industrial control panels, sensor interfaces with 10-bit ADC precision, low-power battery-powered instruments, building automation, HVAC controllers, and USB/serial human-interface devices. The 10-bit ADC provides adequate resolution for temperature, pressure, and analog signal acquisition. When designing with this MCU, ensure decoupling capacitors (100 nF) are placed close to VDD/AVDD/VSS pins and that MCLR is properly pulled up. The device supports ICD (In-Circuit Debugger) via the ICSP interface for development. The PIC18LF4220 is now in Microchip's mature lifecycle phase, so confirm long-term availability before high-volume deployment. This page synthesizes distributor pricing, drop-in alternative listings from Microchip's same-family cross-reference and complementary part cross-reference, datasheet-derived specifications, and practical design notes not consolidated on the manufacturer product page.

RFQ Contact

PIC18LF4220T-I/ML

PIC18LF4220T-I/ML - 4KB Flash 8-bit MCU 44-VQFN | Microchip

The Microchip Technology PIC18LF4220T-I/ML is a high-performance, enhanced Flash 8-bit microcontroller in the PIC18F family, delivering 4 KB of program Flash memory, 512 bytes of RAM, and 256 bytes of EEPROM in a 44-pin VQFN package with exposed thermal pad. It operates up to 40 MHz at 5 V and supports 36 digital I/O lines, a 10-bit ADC with up to 13 input channels, plus nanoWatt Technology power management. The 'LF' prefix denotes an extended low-voltage core (2.0 V to 5.5 V) optimized for battery and energy-harvesting applications. An 8-bit PIC microcontroller is a RISC-based single-chip computer that integrates CPU core, Flash program memory, RAM, EEPROM, peripherals, and I/O on one die. Within the broader taxonomy it sits as a microcontroller -> embedded controller -> semiconductor -> integrated circuit. The PIC18 family specifically uses a 16-bit instruction word with 8-bit data path and a modified Harvard architecture, delivering deterministic instruction timing and an interrupt structure suitable for real-time embedded control. Key features include 4 KB self-programmable Flash, 512 bytes SRAM, 256 bytes data EEPROM, hardware USART, MSSP (SPI/I2C), a 10-bit ADC, two 8-bit and one 16-bit timer, and nanoWatt power-saving modes (Idle, Sleep, Run modes) with on-board low-power Timer1 oscillator. The 44-VQFN exposed pad package is specified to 8x8 mm with 0.65 mm pitch for compact SMD layouts, and the -I temperature grade covers the industrial -40C to +85C range. Typical applications include industrial sensor nodes, low-power remote controls, small appliance controllers, HVAC interface boards, battery-backed instrumentation, USB HID firmware (with companion parts), and consumer white-goods main boards. The wide voltage range and nanoWatt modes make this part attractive for energy-constrained designs. When designing with this device, ensure the exposed thermal pad is soldered to a sufficiently large copper pour for mechanical and thermal performance; missing this connection reduces power dissipation capability and can violate the solder-joint reliability spec. The wide VDD range simplifies direct battery connection without external LDO stages. This page synthesizes verified distributor pricing, drop-in replacement options, and engineering design notes drawn from manufacturer documentation, providing information not assembled on any single distributor or manufacturer page.

RFQ Contact

PIC18LF4220T-I/PT

PIC18LF4220T-I/PT - 8-bit MCU 4KB Flash 36 I/O | Microchip

The Microchip Technology PIC18LF4220T-I/PT is a low-voltage 8-bit microcontroller in the PIC18F family featuring 4KB of Flash program memory, 512 bytes of SRAM, 256 bytes of EEPROM, and 36 digital I/O pins, packaged in a 44-pin TQFP (PT) footprint with a maximum clock frequency of 40 MHz and an operating supply range of 2.0 V to 5.5 V. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), working memory (RAM), non-volatile data memory (EEPROM), and a configurable set of peripherals (ADC, timers, communication ports, I/O). Within the broader semiconductor hierarchy, an MCU belongs to the category of microcontrollers, which sit under microprocessors and embedded processors, which themselves are a subset of logic and computing ICs. The PIC18 family uses an enhanced Harvard RISC architecture with a 16-bit instruction word and an 8-bit data path, executing most instructions in a single cycle. Key features include a 10-bit ADC with up to 13 channels, nanoWatt power management with multiple low-power modes (Sleep, Idle, Run), four timer modules (Timer0/1/2/3), two capture/compare/PWM modules, an enhanced USART, an MSSP peripheral that supports SPI and I²C, and a programmable watchdog timer with its own on-chip RC oscillator for maximum reliability. The 'LF' prefix designates the low-voltage variant of the PIC18F4220, identical in die and pinout but optimized for operation down to 2.0 V, suitable for battery-powered designs. The device is built on Microchip's enhanced FLASH self-programming architecture, allowing field firmware upgrades without external programming voltage. The 'T' suffix indicates tape-and-reel packaging for high-volume assembly. Typical applications include industrial control nodes, low-power sensor interfaces, HVAC thermostat controllers, battery chargers, LED lighting controllers, and consumer appliance subsystems. The 2 V minimum supply and nanoWatt Sleep current (typically under 100 nA with peripherals disabled) make this device well suited for portable and energy-harvesting designs. When designing with this MCU, ensure the ICSP (In-Circuit Serial Programming) pins PGC/PGD are accessible on the PCB to allow firmware updates in production. Decouple VDD/VSS with a 100 nF ceramic placed within 5 mm of the pins, and route MCLR through a 10 kΩ pull-up unless the configuration register disables this pin.

RFQ Contact

PIC18LF4221-I/ML

PIC18LF4221-I/ML - 8-Bit MCU, 40MHz, 4KB Flash, 44-QFN | Microchip

The Microchip Technology PIC18LF4221-I/ML is an 8-bit PIC18F-family microcontroller (MCU) running up to 40 MHz, equipped with 4 KB (2K x 16) of Flash program memory and 512 bytes of RAM, housed in a 44-pin QFN (8x8 mm) package with an exposed thermal pad (ML). The 'LF' prefix denotes the wide-voltage variant operating from 2.0 V to 5.5 V, making the part suitable for both battery-powered and 5 V regulated rails. A microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, data memory and programmable peripherals. The PIC18F architecture is an enhanced 8-bit Harvard RISC core with hardware multiply, prioritized interrupt controller and a 16-bit instruction word that improves code density versus older PIC16 cores. Within the broader taxonomy, PIC18F MCUs sit between the smaller PIC16F parts and the 16-bit PIC24/dsPIC families. Key features of the PIC18LF4221 include 10-bit ADC, multiple timers (Timer0/Timer1/Timer2/Timer3), enhanced CCP, MSSP (SPI/I2C) and AUSART serial interfaces, a 10-bit PWM module, internal 32 kHz to 8 MHz oscillator calibration, and nanoWatt Technology power management. The exposed-pad QFN-44 package (JEITA/EIAJ HVQCCN) provides a thermal pad for improved theta-JA, while the 8x8 mm body keeps the board footprint compact for space-constrained designs. In-circuit debugging is supported through two I/O pins (PGM/PGC) and the ICSP interface, allowing MPLAB ICD programmers and debuggers to flash and step the device without removing it from the board. The combination of self-programmability, robust 2.0-5.5 V operation and rich peripheral set makes the part attractive for both consumer and industrial embedded designs. Typical applications include USB-human-interface-device-class peripherals when paired with an external PHY, low-cost sensor hubs for industrial monitoring, white-goods and appliance control boards, automotive interior lighting and HVAC controls, and handheld instrumentation displays. The wide voltage range also enables direct Li-Ion or 2x AA battery operation in portable products. When designing, ensure the QFN exposed pad is soldered to a copper pour of at least 1 square inch to meet theta-JA for full industrial-temperature (-40C to +85C) operation. Decoupling must include a 100 nF X7R within 2 mm of VDD and a bulk 10 uF on the main rail; decoupling the AVDD pin separately prevents ADC noise on the digital supply. This page consolidates distributor live-stock signals, drop-in 44-QFN pin-compatible alternatives within the PIC18 LF family, and design notes (thermal pad, decoupling, ICSP) not always obvious from a quick datasheet skim.

RFQ Contact

PIC18LF4221-I/PT

PIC18LF4221-I/PT - 8-Bit 40MHz 4KB Flash MCU | Microchip TQFP-44

The Microchip Technology PIC18LF4221-I/PT is an 8-bit PIC18F-family RISC microcontroller running at up to 40 MHz with 4 KB of Flash program memory and 512 bytes of RAM, housed in a 44-pin TQFP (10x10 mm) package. It integrates 34 I/O lines, an enhanced 10-bit ADC, and the standard PIC18 peripheral set including UART, SPI, and I2C interfaces, designed for industrial high-performance applications. The 'LF' prefix denotes the wide-voltage VDD range of 2.0 V to 5.5 V needed for low-power and battery-backed designs. An 8-bit microcontroller is a single-chip computer built around an 8-bit data path; it sits in a hierarchy that runs MCU -> 8-bit MCU -> embedded controller -> semiconductor. PIC18F devices add a 16-bit instruction word to an 8-bit data path, enabling linear addressing and higher code density than the legacy PIC16 family. Compared with 32-bit Cortex-M parts, 8-bit MCUs trade raw throughput for cost, deterministic interrupt latency, and decades of compiler/ecosystem support. Key features include 40 MHz operation (10 MIPS), 4 KB Flash with 2K x 16 organization, 512 bytes of RAM, 34 digital I/O pins, 10-bit ADC with multiple channels, two analog comparators, two 8-bit and three 16-bit timers, and the nanoWatt Technology power management set for low-power sleep modes. The wide 2.0 V to 5.5 V supply range allows the part to run directly from a single Li-ion cell or from a regulated 3.3 V or 5 V rail without level shifting. The device uses the proven PIC18 RISC architecture with a 16-bit instruction word and an 8-bit data bus, supported by the MPLAB XC8 toolchain and a complete family header-library ecosystem. Internal oscillator options, an integrated programmable brown-out reset, and a hardware watchdog provide design robustness without external components. The device operates across the industrial -40C to +85C temperature range with at least 100K erase/write cycles on Flash. Typical applications include industrial control subsystems, consumer white-goods user interfaces, sensor signal conditioning nodes, low-power remote controls, USB-less human-interface peripherals, and battery-powered data loggers. The wide voltage and small footprint make the part a drop-in replacement choice when migrating from older PIC16 designs that need more code space than the previous generation could host. When designing with the PIC18LF4221-I/PT, place a 100 nF decoupling capacitor as close as possible to the VDD pin and keep the MCLR pull-up trace short. Verify oscillator start-up margin at the lowest expected VDD if you rely on the internal HFINTOSC, since low-voltage start-up behavior depends on both temperature and the configured clock mode. This page synthesizes distributor stock and pricing, a verified drop-in list, and design notes not found in the manufacturer datasheet to give engineers a single decision-ready reference for the PIC18LF4221-I/PT.

RFQ Contact

PIC18LF4221T-I/ML

PIC18LF4221T-I/ML - 8-bit PIC MCU, 4KB Flash, 44-QFN | Microchip

The Microchip PIC18LF4221T-I/ML is a low-power 8-bit PIC18 microcontroller built on a RISC architecture, integrating 4 KB of Flash program memory and 512 bytes of RAM in a 44-pin QFN (8x8 mm) package. It operates at up to 40 MHz, delivers 10 MIPS performance, and runs from a wide 2.0V-5.5V supply, making it suitable for both 3.3V and 5V system designs. The 'LF' prefix designates the low-voltage, low-power variant of the PIC18F4221 family. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, Flash program memory, SRAM data memory, EEPROM, and a rich set of peripheral interfaces. The PIC18 family uses a 16-bit instruction word with an 8-bit data path, positioned in the hierarchy as: PIC18 -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. This category targets applications that need deterministic real-time performance, ultra-low standby power, and a mature toolchain. Key features of the PIC18LF4221T-I/ML include 10-bit ADC channels with multiple acquisition options, enhanced CCP (Capture/Compare/PWM) modules, USART with LIN support, MSSP for SPI/I2C, nanoWatt Technology for ultra-low power sleep modes, and a 10 MHz internal oscillator. The 44-QFN (ML) package provides a small 8x8 mm footprint with an exposed thermal pad, ideal for space-constrained board layouts. Typical applications span industrial control panels, low-power sensor nodes, handheld instrumentation, consumer white goods, and automotive body modules. The wide operating temperature range of -40C to +85C (industrial grade) suits both indoor and moderately harsh environments. The 'T' suffix indicates Tape and Reel packaging for high-volume SMT assembly. When designing with this device, ensure decoupling capacitors are placed within 2 mm of VDD pins and that the exposed thermal pad is soldered to a sufficient copper pour for heat dissipation. Use MPLAB X IDE with XC8 compiler and pickit or ICD programmers for development; the nanoWatt sleep modes can drop quiescent current below 1 uA for battery-powered designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet alone.

RFQ Contact

PIC18LF4320-I/P

PIC18LF4320-I/P - 8KB Flash 8-bit MCU | Microchip Technology

The Microchip Technology PIC18LF4320-I/P is an 8-bit high-performance RISC microcontroller with 8KB of Flash program memory and 512 bytes of RAM, housed in a 40-pin PDIP (Plastic Dual In-line Package) for through-hole designs. It operates at up to 10 MIPS from a wide 2.0V to 5.5V supply, making it suitable for both 3.3V and 5V systems while integrating nanoWatt power management for ultra-low-power applications. An 8-bit PIC microcontroller belongs to the family of modified Harvard-architecture microcontrollers, characterized by separate program and data memory buses, an instruction set optimized for single-cycle execution, and integrated peripherals such as ADC, timers, and communication interfaces. Within the broader semiconductor hierarchy, 8-bit MCUs sit below 16-bit and 32-bit MCUs in computational capability but excel in cost-sensitive, deterministic, low-power embedded applications such as appliance control, sensor interfacing, and industrial monitoring. Key features of the PIC18LF4320-I/P include a 10-bit Analog-to-Digital Converter (ADC) with up to 13 input channels, 36 digital I/O pins, an Enhanced Capture/Compare/PWM (ECCP) module, two 8-bit timers plus three 16-bit timers, and multiple communication interfaces including USART, MSSP (SPI/I2C), and a parallel port. The nanoWatt technology provides multiple power-managed operating modes (Run, Idle, Sleep, and a secondary oscillator for real-time clock operation), enabling extended battery life in portable designs. The device uses an enhanced PIC18 instruction set with 77 single-word instructions and a hardware 8x8 multiplier for efficient arithmetic operations. With self-programmable Flash memory, ICD (In-Circuit Debug) support, and a wide operating temperature range of -40C to +85C, it is engineered for both prototype and production environments. Typical applications include industrial control panels, HVAC sensor modules, automotive accessory controllers, home appliance user interfaces, and low-power remote sensor nodes. Its 36 I/O capability supports multi-channel sensor aggregation, while the 10-bit ADC delivers adequate resolution for temperature, pressure, and voltage monitoring. When designing with the PIC18LF4320-I/P, ensure decoupling capacitors are placed close to the VDD pins (typically 100 nF) and consider using MPLAB X IDE with compatible XC8 compilers and PICKit programmers for firmware development. The 40-pin PDIP footprint enables easy breadboarding and socket-based prototyping, while the wide voltage range simplifies integration into mixed-voltage systems. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing an actionable reference for engineers evaluating this MCU for embedded designs.

RFQ Contact

PIC18LF4320-I/PT

PIC18LF4320-I/PT - 8-Bit 40MHz 8KB Flash MCU | Microchip

The Microchip Technology PIC18LF4320-I/PT is an 8-bit CMOS Flash microcontroller from the PIC18F family, delivering 10 MIPS performance at 40 MHz clock speed with 8 KB (4K x 16) of program Flash memory, housed in a 44-pin TQFP (10x10 mm) package. The LF prefix designates a low-voltage variant with extended operating range from 2.0V to 5.5V, while the F-suffix denotes Flash program memory and the /PT industrial temperature grade covers -40C to +85C. A PIC18 microcontroller belongs to Microchip's high-performance 8-bit family, sitting above the PIC16F mid-range parts and below the PIC24/dsPIC 16-bit families in the company's product hierarchy. The PIC18 architecture uses a 16-bit instruction word with an 8-bit data path, 77 single-word instructions, hardware multiplier, and a 32-level deep hardware stack, giving it roughly 4x the throughput of legacy PIC16 mid-range devices at the same clock rate. Key features of the PIC18LF4320-I/PT include 8 KB of self-programmable Flash, 512 bytes of RAM, 256 bytes of EEPROM, a 10-bit ADC with up to 13 input channels, multiple timers (Timer0/1/2/3), a 5-bit PWM module, two analog comparators, MSSP (SPI/I2C) and USART peripherals, nanoWatt Technology for power-managed Sleep modes, and ICD (In-Circuit Debugger) support via the ICSP interface. The 'nanoWatt' label indicates integrated dynamic clock switching and idle/doze modes that reduce operating current below 1 uA in Sleep. Architecturally, the PIC18LF4320 uses a Harvard-design CPU with separate program and data buses, a peripheral pipeline that lets the CPU fetch the next instruction while peripherals complete their current cycle, and an enhanced instruction set that includes C-optimized operations. Self-programmability permits in-field firmware upgrades without external boot memory, which is essential for remote-sensor and appliance applications. Typical applications include industrial control panels, HVAC fan/sensor controllers, low-power sensor nodes, small appliances, automotive body modules (non-AEC-Q100), instrument clusters, USB-less human-interface devices, and any 5V-tolerant 8-bit embedded design that needs moderate analog integration. The wide 2.0V-5.5V supply range also supports direct battery operation from 2x AA cells or a single Li-ion cell with boost regulation. When designing with this part, ensure the MCLR pin has the proper 10 kohm pull-up to VDD for normal operation, place a 100 nF decoupling capacitor within 5 mm of each VDD/VSS pin pair, and reserve the PGM/RB5-RB7 pins for ICSP programming access. Code-size planning should leave at least 1 KB of Flash headroom for bootloader or future field-update logic.

RFQ Contact

PIC18LF4320T-I/ML

PIC18LF4320T-I/ML - 8KB Flash 8-Bit MCU 44-VQFN | Microchip

The Microchip Technology PIC18LF4320T-I/ML is an 8-bit PIC18-family flash microcontroller featuring 8 KB (4K x 16) of program memory, 512 bytes of SRAM, and 256 bytes of EEPROM, housed in a 44-pin VQFN (ML) package with exposed thermal pad. The LF suffix indicates an extended low-voltage core that operates from 2.0 V to 5.5 V, while the I temperature grade supports the industrial -40C to +85C range. The T suffix denotes Tape & Reel packaging for high-volume assembly. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash/ROM), data memory (RAM), and programmable peripherals. The PIC18F/LF family is Microchip's high-performance 8-bit architecture offering enhanced instruction set, C-friendly compiler support (MPLAB XC8), and nanoWatt Technology for dynamic power management. MCUs sit within the broader taxonomy of microprocessors -> computing ICs -> embedded processors -> microcontrollers, and dominate cost-sensitive, low-power embedded designs. Key features include 36 digital I/O pins, a 10-bit ADC with up to 13 input channels, multiple serial interfaces (USART, MSSP for SPI/I2C), four timer modules, and nanoWatt power management modes. The 44-VQFN exposed pad package provides low thermal resistance for improved power dissipation in compact layouts, while the 8 KB flash supports typical mid-complexity embedded applications. The architecture uses a 16-bit modified Harvard instruction set with an 8-bit data path, achieving up to 10 MIPS at 40 MHz. Internal PLL options allow flexible clocking from low-frequency crystals, and the device supports ICSP (In-Circuit Serial Programming) for field updates. Brown-out Reset, Power-on Reset, and a Watchdog Timer ensure reliable operation in industrial environments. Typical applications include industrial sensor interfaces, HVAC controls, low-power remote sensing nodes, small appliance controllers, and consumer electronics requiring USB-free, USB-less connectivity. The 13-channel 10-bit ADC is well suited for analog sensor reading, while multiple PWM outputs enable motor or LED control tasks. When designing with this device, ensure the exposed pad (EP) is soldered to a sufficiently large copper pour for thermal performance. The LF variant's low-voltage operation (down to 2.0 V) enables two-AA-battery or single Li-cell designs but does not support 5V-only analog performance of the F variant. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, supporting engineers searching for cross-reference, replacement, and integration guidance for the PIC18LF4320T-I/ML.

RFQ Contact

Subcategories

Products (39,000+)

PIC18LF27K40-E/SP - 8-bit 64MHz 128KB Flash XLP MCU | Microchip

PIC18LF27K40-I/ML - 8-bit 64MHz XLP MCU 128KB Flash | Microchip

PIC18LF27K40-I/SO - 64MHz 128KB Flash 8-bit XLP MCU | Microchip

PIC18LF27K40-I/SP - 128KB Flash 8-bit MCU, 28-SPDIP | Microchip

PIC18LF27K40-I/SS - 128KB Flash 8-bit MCU, XLP | Microchip

PIC18LF27K40T-I/ML - 128KB Flash 8-bit XLP MCU | Microchip

PIC18LF27K40T-I/SO - 64MHz 8-Bit XLP MCU 128KB Flash | Microchip

PIC18LF27K40T-I/SS - 128KB Flash XLP 8-bit MCU | Microchip

PIC18LF27K42-E/ML - 64MHz 8-bit XLP MCU, 128KB Flash | Microchip

PIC18LF27K42-E/SO - 128KB Flash 8-bit MCU 64MHz 28-SOIC

PIC18LF27K42-E/SP - 64MHz 8-Bit XLP MCU, 128KB Flash | Microchip

PIC18LF27K42-I/SO - 8-bit 64MHz 128KB Flash XLP MCU | Microchip

PIC18LF27K42-I/SS - 128KB Flash XLP 8-bit MCU 28-SSOP

PIC18LF27K42T-I/SS - 64MHz 8-bit XLP MCU, 128KB Flash | Microchip

PIC18LF4220-I/ML - 8-bit PIC MCU, 4KB Flash, 44-QFN | Microchip

PIC18LF4220-I/PT - 8-bit 40MHz MCU 4KB Flash 44-TQFP | Microchip

PIC18LF4220T-I/ML - 4KB Flash 8-bit MCU 44-VQFN | Microchip

PIC18LF4220T-I/PT - 8-bit MCU 4KB Flash 36 I/O | Microchip

PIC18LF4221-I/ML - 8-Bit MCU, 40MHz, 4KB Flash, 44-QFN | Microchip

PIC18LF4221-I/PT - 8-Bit 40MHz 4KB Flash MCU | Microchip TQFP-44

PIC18LF4221T-I/ML - 8-bit PIC MCU, 4KB Flash, 44-QFN | Microchip

PIC18LF4320-I/P - 8KB Flash 8-bit MCU | Microchip Technology

PIC18LF4320-I/PT - 8-Bit 40MHz 8KB Flash MCU | Microchip

PIC18LF4320T-I/ML - 8KB Flash 8-Bit MCU 44-VQFN | Microchip