Products (46,000+)

STA308A - 8-Channel 24-Bit Digital Audio Processor | STMicroelectronics
STA308A

STA308A - 8-Channel 24-Bit Digital Audio Processor | STMicroelectronics

The STMicroelectronics STA308A is an 8-channel, 24-bit multichannel digital audio processor with DDX direct-digital-amplification output capability, housed in a 64-TQFP package measuring 10 mm by 10 mm. It supports selectable input sample rates from 32 kHz to 192 kHz, six DSD/SACD input channels, I2C control with a selectable device address, and digital gain or attenuation. According to the STMicroelectronics manufacturer datasheet, the processor provides more than 100 dB signal-to-noise ratio and dynamic range. A digital audio processor is a specialized signal-processing IC that receives digital audio streams, applies configurable channel processing and volume control, and produces digital outputs for downstream converters or power stages. Within the broader hierarchy, the STA308A belongs to audio special-purpose ICs, digital signal processors, multichannel audio ICs, and power-management-dependent amplification systems. Its DDX outputs allow an external DDX power device to complete an all-digital Class-D-style amplification chain. The principal features include eight 24-bit DDX channels, greater-than-100-dB SNR and dynamic range, sample-rate selection from 32 kHz through 192 kHz, and six DSD/SACD inputs. I2C control simplifies configuration of device addressing and digital gain or attenuation. These functions make the device suitable for DVD, home-theater, active-speaker, digital mixing, and multi-zone audio systems where several decoded channels must be routed and level-controlled centrally. Technically, the STA308A separates digital signal processing from analog power amplification. Its digital outputs can connect to compatible DDX power devices, reducing the need for conventional analog volume-control paths and allowing attenuation to remain in the digital domain. This architecture can improve channel integration and simplify control software, but system performance also depends on the selected power device, power-supply design, output filtering, clocking, and PCB signal integrity. Typical uses include 5.1- and 7.1-channel surround systems, powered speakers, DVD receivers, digital active loudspeakers, and compact audio hubs. The 10 mm square TQFP package supports conventional surface-mount assembly, although careful decoupling and short high-speed routing remain essential. The supplied source material does not state supply voltage, clock limits, output logic levels, or thermal resistance. Designers should confirm all logic levels, supported digital interfaces, DDX power-device requirements, and external component values against the manufacturer datasheet. Because the verified excerpts emphasize processing rather than exact pin assignments, engineers should use the official PDF for the complete 64-pin connection table rather than infer unused pins. Distributor pricing and lifecycle status were not provided, so purchasing requires a current quote and availability check. This page consolidates verified manufacturer capabilities, distributor identification, sourcing guidance, and design cautions for the STA308A. It distinguishes confirmed functions from missing electrical details and avoids presenting unverified alternatives as drop-in replacements.

RFQ Contact
STA308A13TR - 8-Channel 24-Bit Audio DSP | STMicroelectronics
STA308A13TR

STA308A13TR - 8-Channel 24-Bit Audio DSP | STMicroelectronics

STMicroelectronics STA308A13TR is an eight-channel 24-bit DDX multichannel digital audio processor with greater than 100 dB signal-to-noise ratio and dynamic range. It supports selectable input sample rates from 32 kHz to 192 kHz, six channels of DSD/SACD input, and selectable I2C device addressing. The processor is packaged in a 64-pin TQFP measuring 10 mm by 10 mm and is intended for advanced digital audio systems. A digital audio processor is a specialized signal-processing IC that operates on digital audio streams rather than directly amplifying an analog waveform. Within the broader hierarchy of DSP, audio DSP, and integrated circuits, it provides channel routing, volume control, equalization, sampling-rate handling, and multichannel processing. These functions are commonly used in home theater, professional audio, automotive infotainment, and powered-speaker products. The DDX architecture supports eight channels of 24-bit processing with greater than 100 dB SNR and dynamic range. Selectable 32 kHz through 192 kHz input rates provide flexibility for CD-rate, high-resolution audio, and multichannel entertainment sources. Six DSD/SACD input channels extend the digital input capability beyond conventional PCM operation. Programmable signal conditioning includes digital gain and attenuation from +58 dB to -100 dB in 0.5 dB steps, soft-volume updates, individual channel and master gain controls, and channel trim from -10 dB to +10 dB. Each channel can support up to ten independent 32-bit user-programmable biquad equalizers, allowing tonal correction without changing the external analog signal path. Typical systems include multichannel A/V receivers, digital active loudspeakers, automotive audio controllers, home-theater processors, and professional sound equipment. The 64-pin TQFP provides enough external connections for multichannel digital audio, control, clocking, and power rails while supporting surface-mount manufacturing. Designers should preserve the recommended clock, layout, grounding, and decoupling arrangements from the manufacturer datasheet. I2C configuration must account for the selectable device address, while software should handle the soft-volume update sequence to prevent audible gain discontinuities. The processor supports a -40 °C to 90 °C operating-temperature range according to the product listing. This page combines the available channel-count, bit-depth, SNR, sampling-rate, gain-control, DSD/SACD, package, and temperature information with practical selection guidance. It also distinguishes verified drop-in candidates from related products that cannot be assumed to share pin compatibility.

RFQ Contact
STA309A - 8-Channel Digital Audio Processor | STMicroelectronics
STA309A

STA309A - 8-Channel Digital Audio Processor | STMicroelectronics

The STMicroelectronics STA309A is an 8-channel fully integrated digital audio processor with DDX output capability, supplied in a 64-pin TQFP package measuring 10 mm by 10 mm. It provides the digital processing and control required by multi-channel audio systems and accepts audio data from compatible serial digital-audio components through configurable serial interfaces. The processor operates as a slave when receiving standard digital-audio input, simplifying integration with external source devices. A digital audio processor is a programmable semiconductor that manages one or more audio signal paths, applying channel routing, volume, equalization, decoding, or other processing functions under software or hardware control. Within the product hierarchy, the STA309A belongs to audio ICs, digital signal processors, and multi-channel digital audio processors. It is intended to work with a compatible DDX power device when a complete Class-D-style output stage is required. Verified product information identifies the STA309A as a single-chip solution for digital audio processing and control in multi-channel applications. Its principal verified features include eight processing channels, support for several serial audio input formats, slave operation for standard digital-audio input, and DDX outputs for connection to external power-stage devices. These functions make it useful in home-theater systems, powered speakers, digital active speakers, and custom multi-way audio products. The serial interface accepts standard digital audio streams from source components, while the processing core organizes those streams for eight-channel output. Configuration software and the correct external memory or control circuitry must be selected from the manufacturer datasheet; those detailed electrical and memory requirements are not included in the supplied search data. System designers should therefore avoid inferring unsupported sample rates, filter coefficients, or control-interface details without reviewing the official documentation. Typical designs place the STA309A between an optical, coaxial, network, or other digital-audio source and a multi-channel DDX output stage. The source supplies a compatible serial stream, the processor applies the required channel processing, and a DDX power device reconstructs the amplified analog output. Software configuration is essential for routing, crossovers, equalization, and channel delays, so processor capability alone does not replace correct system implementation. The primary design consideration is interface compatibility. Because the STA309A acts as a slave when receiving audio from standard digital-audio components, the master device, clocking arrangement, serial format, and signal mapping must all match. Board layout should preserve short, clean clock and data paths, provide stable decoupling, and route high-current DDX output signals separately from sensitive processor signals. Prototype validation should include clocking, channel assignment, mute behavior, and full-load output behavior. This product record combines verified STMicroelectronics and distributor information with explicit data gaps, package requirements, application guidance, and sourcing links. Unlike a basic distributor listing, it identifies the processor role and emphasizes the engineering checks needed before using the 64-TQFP device as a drop-in element in a multi-channel audio design.

RFQ Contact
STA309A13TR - 8-Channel Digital Audio Processor | STMicroelectronics
STA309A13TR

STA309A13TR - 8-Channel Digital Audio Processor | STMicroelectronics

STMicroelectronics STA309A13TR is an 8-channel fully integrated digital audio processor with DDX output capability, housed in a 64-TQFP package measuring 10 mm by 10 mm. It processes most common digital audio formats for multichannel systems and supports 6.1-channel and 7.1-channel content, 192 kHz sampling, and 24-bit resolution. A digital audio processor is a specialized signal-processing IC that receives digital audio streams, applies decoding, routing, volume, and channel-control functions, and prepares the result for downstream power amplification. The STA309A belongs to the broader digital signal processor hierarchy and serves as the control and processing stage between digital audio sources and DDX-compatible power devices. The STA309A13TR integrates eight-channel audio processing into one device and provides output capabilities for DDX power amplifiers. Its support for 192 kHz and 24-bit audio makes it appropriate for high-resolution home theater, multichannel amplification, digital active-speaker, and professional audio systems. The distributor description also identifies a 100 dB signal-to-noise rating and 1 W output capability. This architecture allows a receiver, amplifier, or speaker system to centralize multichannel routing and processing before power amplification. Digital processing can reduce the number of discrete control functions required in the signal path, while DDX output compatibility provides a defined interface to compatible power stages. The exact clocking, interconnect, and configuration details should be taken from the manufacturer pin-description table and reference circuitry. Typical applications include 7.1-channel home-theater amplification, six-channel digital active speakers, high-resolution multichannel audio receivers, and powered loudspeaker systems using DDX devices. In these systems, the processor handles digital multichannel content and coordinates it across the available output channels before the external power stage drives the transducers. PCB implementation should preserve the recommended decoupling and signal-routing arrangement for the 64-TQFP footprint. Pay particular attention to power-supply integrity, exposed-pad thermal performance, digital input routing, and output-channel mapping. Use the manufacturer datasheet pin table when assigning every signal and programming the device. This page combines the verified product identity, package information, multichannel capability, price handling, and application-focused engineering guidance. It also distinguishes the available drop-in option from functional substitutes so engineers can assess PCB reuse without mistaking a different audio architecture for a pin-compatible replacement.

RFQ Contact
STA310 - 6+2-Channel Audio Decoder | STMicroelectronics
STA310

STA310 - 6+2-Channel Audio Decoder | STMicroelectronics

The STMicroelectronics STA310 is a fully integrated multistandard audio decoder with 6+2-channel decoding, designed for HDTV, audio players, receivers, and set-top boxes in an 80-pin TQFP (14x14) package. The supplied data confirms support for DVD Audio Meridian Lossless Packing (MLP), uncompressed LPCM with 1–8 channels, and encoded data input through serial I2S, S/PDIF, or parallel interfaces. An audio decoder is an interface IC that converts compressed or encoded digital audio streams into PCM data for downstream digital-to-analog converters, amplifiers, receivers, or speakers. Within the signal chain, it sits between a source interface and the audio output stage, handling format recognition, channel organization, and decoding while leaving analog amplification and loudspeaker drive to downstream components. The STA310's key verified features include integrated multistandard decoding and support for both serial and parallel input paths. The I2S and S/PDIF options suit modern digital audio systems, while the parallel interface can support legacy source architectures. Its 6+2-channel capability is relevant to multichannel home entertainment, although exact channel-routing behavior must be confirmed from the manufacturer datasheet and application implementation. The architecture combines encoded digital audio input, format-specific decoding, and decoded audio output in one device. This integration can reduce the external decoder count in a set-top box, DVD player, HDTV, or surround-sound receiver. System designers must still account for clocking, supported sample rates, output format, electrical levels, signal integrity, and software or control requirements that are not specified in the supplied web excerpts. Typical applications include HDTV audio processing, DVD and disc-player output stages, AV receivers, digital audio players, set-top boxes, and other home-entertainment equipment. The STA310 is especially relevant where a product must accept encoded digital audio from several source types and produce decoded multichannel PCM audio for a downstream codec or amplifier. When laying out an STA310 design, preserve the exact pin assignments and reference interface timing shown in the manufacturer datasheet. Keep digital audio, clock, and power routing controlled, provide the required bypass and interface components, and validate timing margins across every supported input format. This page consolidates distributor identification, verified format support, sourcing data, and engineering guidance.

RFQ Contact
STA311B Multichannel Audio Processor | STMicroelectronics
STA311B

STA311B Multichannel Audio Processor | STMicroelectronics

STMicroelectronics STA311B is a single-chip digital audio processing and control solution for multichannel audio systems, with output capabilities for FFX (full flexible amplification). The device is identified by STMicroelectronics as a multichannel digital audio processor and is positioned for applications requiring digital audio processing, control, and flexible output amplification. Its verified package information, channel count, audio-interface format, processing architecture, and electrical limits were not included in the supplied web excerpts and therefore remain subject to confirmation from the manufacturer datasheet. A digital audio processor is a specialized integrated circuit that receives digital audio data, executes configurable signal-processing operations, and returns the processed result to the system. Within the broader semiconductor hierarchy, the STA311B is an audio DSP, which belongs to the digital signal processor and audio integrated-circuit categories. Unlike a simple codec or analog amplifier, its role centers on programmable multichannel audio processing and system control rather than only converting between analog and digital signals. The STA311B's central verified feature is its integration of digital audio processing, multichannel control, and FFX output capability in one device. According to the STMicroelectronics product page, this combination can simplify audio-system design by consolidating functions normally distributed across several dedicated devices. The same manufacturer description identifies it as a single-chip solution, which may reduce component count and board-level integration effort in compatible multichannel audio equipment. The manufacturer's datasheet is the authoritative source for the complete digital input and output interface, supported sample rates, bit depths, processor-channel count, filter resources, control interfaces, clocking, supply voltages, and electrical characteristics. Those individual parameters were not exposed in the supplied search excerpts, so no numerical limits are inferred here. This distinction is important for multichannel designs because interface format, clock requirements, and power specifications determine whether the STA311B can replace another processor without a PCB or firmware redesign. Typical potential uses include multichannel active loudspeaker systems, digital cinema audio, home-cinema processing, professional audio electronics, soundbars, and other multichannel playback products. The STA311B is especially relevant where several audio channels require coordinated processing and flexible amplification control. Actual suitability depends on matching the source format, channel topology, DSP configuration, control protocol, and system clock to the manufacturer's documented limits. Before design-in, engineers should review the official STA311B datasheet and product page for the exact package outline, complete pinout, supported interfaces, recommended operating voltages, clocking scheme, and reset or configuration requirements. The verified excerpts do not disclose a public pin mapping, so no pin-level wiring should be inferred from this page. Distributor availability and the listed starting price should also be reconfirmed before procurement. This page distinguishes directly verified manufacturer claims from unavailable technical fields and combines that evidence with purchasing guidance, application context, and explicit validation boundaries. That approach helps engineers evaluate the STA311B without treating unverified channel, package, timing, or electrical claims as drop-in-compatible facts.

RFQ Contact
STA311BTR - 8-Channel Audio DSP with FFX | STMicroelectronics
STA311BTR

STA311BTR - 8-Channel Audio DSP with FFX | STMicroelectronics

STMicroelectronics STA311BTR is an 8-channel fully integrated digital audio processor with FFX full-flexible amplification, designed for multichannel digital audio processing and control. It operates from a 3 V to 3.6 V supply, supports audio processing up to 192 kHz, and uses I2S and I2C interfaces. The device is supplied in a 56-pin VFQFPN package measuring 8 mm by 8 mm. These headline parameters position it as a highly integrated audio DSP and signal-processing IC for multichannel consumer audio systems. A digital audio processor is a semiconductor that processes sampled audio signals using programmable algorithms. Within the broader hierarchy, the STA311BTR belongs to the audio DSP category, combines a digital signal processor with multichannel audio control, and provides integrated FFX output-stage control. This integration can reduce the number of separate control and amplification functions required in a multichannel audio subsystem while preserving a centralized digital signal path. The verified data identifies 8 processing channels, operation from 3 V to 3.6 V, and a maximum sampling rate of 192 kHz. I2S provides the digital audio data interface, while I2C supports control communication with a host or configuration controller. The 56-pin VFQFPN package is designed for compact surface-mount assembly, and the stated operating-temperature range of -40°C to 125°C supports use across consumer, industrial, and automotive temperature environments. The STA311BTR family combines digital audio processing, control, and FFX output capabilities in one device. Its 192 kHz capability is relevant to high-resolution audio pipelines, while eight channels allow a single device to manage several audio paths. FFX technology provides the output-control foundation for integrated multichannel amplification, although detailed FFX electrical limits, internal DSP functions, and amplifier configuration options must be confirmed in the manufacturer datasheet before final schematic design. Typical uses include multichannel active speaker systems, home-theater audio processing, digital speaker control, automotive head-unit audio, and other multi-zone audio platforms. It is particularly relevant where a host processor needs to configure several synchronized audio channels without implementing every processing and control function as separate discrete logic. A key design consideration is that the 3 V to 3.6 V operating range leaves limited headroom for ancillary circuitry. Interface levels, external amplifier requirements, decoupling, exposed-pad layout, and grounding must therefore be checked against the datasheet. Because the verified sources do not expose a complete pin table, PCB integration should use the official STMicroelectronics package drawing rather than infer connections from the 56-pin count. This page consolidates the verified distributor and manufacturer information, separates documented parameters from missing data, and provides application guidance, comparison placeholders, and sourcing notes that are not available from a simple distributor listing alone.

RFQ Contact
STA32013TR - 2.1-Channel 24-Bit DDX Audio Processor | STMicroelectronics
STA32013TR

STA32013TR - 2.1-Channel 24-Bit DDX Audio Processor | STMicroelectronics

STMicroelectronics STA32013TR is a 2.1-channel, 24-bit DDX digital audio processor with greater than 100 dB signal-to-noise ratio, selectable input sample rates from 32 kHz to 192 kHz, and I2C control in a 28-pin SOIC package. The obsolete device was supplied in cut-tape packaging for surface-mount production and was positioned for automotive and consumer audio systems requiring multichannel digital signal processing. A digital audio processor is a specialized signal-processing IC that receives digital audio data, applies channelization, volume, filtering, and related control functions, and produces controlled digital outputs for downstream conversion or amplification. In the product hierarchy, the STA32013TR belongs to the audio processor class, which sits within audio special-purpose integrated circuits and broader consumer and automotive signal-processing systems. Its DDX architecture provides a dedicated approach to digital audio channel management rather than requiring several discrete control functions. The principal verified features include support for three output channels in a 2.1-channel configuration and 24-bit digital audio processing. The documented signal-to-noise ratio exceeds 100 dB, supporting high-fidelity audio reproduction. Input sampling can be selected between 32 kHz and 192 kHz, allowing the processor to accommodate source material with different sampling rates. An I2C interface provides a standard two-wire control path for configuration and register access. The STA32013TR is housed in a 28-pin SOIC package measuring 0.295 inches, or 7.50 mm, in width. This package provides a defined surface-mount option for compact audio electronics. The documented operating-temperature range is -20 °C to +125 °C when referenced to junction temperature. These package and environmental characteristics make the device suitable for applications where a conventional SOIC footprint and industrial-temperature operation are required, subject to normal end-of-life sourcing constraints. Typical uses include digital audio preamplifier platforms, multichannel automotive head-unit signal chains, and consumer-audio systems requiring two main channels plus one additional output channel. The 192 kHz upper sampling-rate option supports high-resolution digital-audio workflows, while the greater-than-100 dB SNR specification provides a measurable dynamic-range figure. Because the available source identifies direct digital amplification and preamplifier applications, system designers should verify the external data converter, speaker amplifier, clocking, and interface implementation against the manufacturer documentation. The primary design consideration is lifecycle availability. The supplied web data identifies STA32013TR as obsolete, so production designs should not assume stable new supply. Engineers should confirm whether authorized distributor inventory is genuine, compare any proposed replacement against the complete pinout, clock requirements, register map, and audio performance, and perform system-level listening and signal-integrity validation before substitution. This product page consolidates the verified package, channel-count, bit-depth, sampling-rate, control-interface, environmental, lifecycle, and sourcing information into an engineering-focused record. It also separates documented facts from unavailable pricing, pin-level data, and drop-in alternatives, helping designers identify what must still be confirmed before schematic release or production procurement.

RFQ Contact
STA321MPL - 6-Channel 24-Bit Audio DSP | STMicroelectronics
STA321MPL

STA321MPL - 6-Channel 24-Bit Audio DSP | STMicroelectronics

STMicroelectronics STA321MPL is a scalable digital microphone processor with 6 PDM channels, 2 virtual digital audio channels, and 24-bit audio processing in a 64-pin TQFP (10 x 10 mm) package. Designed for consumer audio systems, it consolidates multiple digital microphone inputs and audio-processing functions into one dedicated IC while supporting an 8-channel audio configuration described by the manufacturer. A digital microphone processor is a specialized audio interface and signal-processing IC. It accepts digital microphone data through PDM interfaces, combines or processes those streams, and routes them into a larger audio system. Within the product hierarchy, the STA321MPL belongs to the audio special-purpose IC class and functions as a configurable digital audio processor rather than a conventional power amplifier or general-purpose microcontroller. Principal features include 6 PDM microphone channels, 2 virtual digital audio channels, and 24-bit resolution. The 64-terminal package provides the mixed-signal, control, clock, data, and power connections required for a multi-microphone audio design. Commercial-grade temperature operation, a 3.3 V supply identified in distributor data, and a low-profile surface-mount format make the device suitable for consumer audio equipment such as soundbars, smart displays, home-audio systems, and compact voice-assisted products. The part's processing resources allow multiple digital microphones to be combined before transmission to a host codec or application processor. This architecture can reduce microphone-count-related wiring complexity while providing a consistent digital-audio data path. The 24-bit processing format preserves high numerical resolution, although achievable microphone and system signal-to-noise performance also depends on the selected microphones, clocks, power design, decoders, and software configuration. Typical uses include beamforming microphone arrays, conference-room audio, smart-home voice terminals, display soundbars, and compact stereo or 2.1 entertainment systems. Designers should use the manufacturer datasheet and reference configuration to map clocks, PDM inputs, digital audio outputs, control interfaces, and supply rails. Exact operating limits, clock frequencies, output formats, and pin-level functions must be confirmed from the full datasheet before layout or firmware release. Power and layout planning should account for all 64 connections even when some application-specific pins are unused. Keep digital audio routing short, maintain a continuous ground reference, isolate noisy power paths from sensitive audio circuitry, and validate timing margins between the processor, microphones, and downstream codec. This page consolidates verified distributor specifications, sourcing information, and practical integration guidance into a design-focused component record.

RFQ Contact
STA321MPL1TR - 8-Channel PDM Microphone Processor | STMicroelectronics
STA321MPL1TR

STA321MPL1TR - 8-Channel PDM Microphone Processor | STMicroelectronics

The STMicroelectronics STA321MPL1TR is an 8-channel scalable digital microphone processor with six physical PDM input channels, two additional virtual channels, and 24-bit processing in a 64-TQFP 10 x 10 mm package. It supports digital gain and attenuation from 58 dB to -100 dB in 0.5 dB steps, soft volume updates, individual channel and master level control, and more than 100 dB SNR and dynamic range. A digital microphone processor is an audio signal-processing IC that accepts pulse-density-modulated microphone data, combines multiple channels, applies configurable level and volume operations, and transfers the resulting digital audio stream to a host or audio system. In the product hierarchy, the STA321MPL1TR belongs to the scalable digital microphone processor class, then to digital audio processors, audio DSPs, and broader power-management-independent semiconductor signal-processing devices. The processor provides eight independent 24-bit digital processing paths. Six channels use physical PDM inputs, while two virtual channels expand the usable processing capability beyond the physical microphone count. The 58 dB to -100 dB gain range gives system designers broad attenuation and amplification control, with each adjustment available in 0.5 dB increments. Soft volume updates allow level changes to be applied without abrupt volume transitions. STMicroelectronics describes the device as a fully digital, high-performance, multichannel processor designed for general-purpose digital microphone applications. Its digital signal path avoids an analog mixer stage after PDM conversion, helping preserve microphone signal integrity while providing centralized channel and master level management. The architecture can serve multi-microphone systems requiring configurable channel routing and software-controlled levels. Typical uses include digital microphone arrays, voice-capture systems, conference equipment, smart audio endpoints, and embedded voice interfaces. Six PDM microphones can be processed concurrently, while the two virtual channels support additional flexible signal-processing resources. A host processor can configure channel gain, master level, and volume behavior through the device control interface. The principal design considerations are PDM clocking, microphone data synchronization, digital-mic power sequencing, and firmware configuration of channel gain and routing. Designers should preserve short, matched digital paths between microphones and the processor and follow the manufacturer’s reference configuration for clock polarity, decimation, and system initialization. This page consolidates the processor architecture, application guidance, verified sourcing information, and design-focused selection criteria into one engineering reference. Use the manufacturer datasheet for the complete register map, timing diagrams, electrical limits, and pin assignments when finalizing a PCB or embedded audio design.

RFQ Contact
STA321MPLTR - 6-Channel 24-Bit Audio DSP | STMicroelectronics (Tape & Reel)
STA321MPLTR

STA321MPLTR - 6-Channel 24-Bit Audio DSP | STMicroelectronics (Tape & Reel)

STMicroelectronics STA321MPLTR is a scalable digital microphone processor with 6 PDM channels, 2 virtual digital audio channels, and 24-bit audio processing in a 64-pin TQFP (10 x 10 mm) package. Designed for consumer audio systems, it consolidates multiple digital microphone inputs and audio-processing functions into one dedicated IC while supporting an 8-channel audio configuration described by the manufacturer. A digital microphone processor is a specialized audio interface and signal-processing IC. It accepts digital microphone data through PDM interfaces, combines or processes those streams, and routes them into a larger audio system. Within the product hierarchy, the STA321MPLTR belongs to the audio special-purpose IC class and functions as a configurable digital audio processor rather than a conventional power amplifier or general-purpose microcontroller. Principal features include 6 PDM microphone channels, 2 virtual digital audio channels, and 24-bit resolution. The 64-terminal package provides the mixed-signal, control, clock, data, and power connections required for a multi-microphone audio design. Commercial-grade temperature operation, a 3.3 V supply identified in distributor data, and a low-profile surface-mount format make the device suitable for consumer audio equipment such as soundbars, smart displays, home-audio systems, and compact voice-assisted products. The part's processing resources allow multiple digital microphones to be combined before transmission to a host codec or application processor. This architecture can reduce microphone-count-related wiring complexity while providing a consistent digital-audio data path. The 24-bit processing format preserves high numerical resolution, although achievable microphone and system signal-to-noise performance also depends on the selected microphones, clocks, power design, decoders, and software configuration. Typical uses include beamforming microphone arrays, conference-room audio, smart-home voice terminals, display soundbars, and compact stereo or 2.1 entertainment systems. Designers should use the manufacturer datasheet and reference configuration to map clocks, PDM inputs, digital audio outputs, control interfaces, and supply rails. Exact operating limits, clock frequencies, output formats, and pin-level functions must be confirmed from the full datasheet before layout or firmware release. Power and layout planning should account for all 64 connections even when some application-specific pins are unused. Keep digital audio routing short, maintain a continuous ground reference, isolate noisy power paths from sensitive audio circuitry, and validate timing margins between the processor, microphones, and downstream codec. This page consolidates verified distributor specifications, sourcing information, and practical integration guidance into a design-focused component record.

RFQ Contact
STA321TR - 4-Channel Audio Processor with FFX | STMicroelectronics
STA321TR

STA321TR - 4-Channel Audio Processor with FFX | STMicroelectronics

The STMicroelectronics STA321TR is a 4-channel digital audio system with an FFX class-D driver, digital gain from -105 dB to +36 dB in 0.5 dB steps, and I2C control in a 64-LQFP-EPD 10 x 10 mm package. The device combines programmable digital audio processing with PWM outputs and a headphone-output stage, allowing compact systems to manage multiple channels while preserving a software-controlled signal path. An audio system processor is an integrated circuit that combines digital signal processing, channel control, output-driver functions, and host configuration in one device. In the broader semiconductor hierarchy, the STA321TR belongs to the audio IC category, specifically a fully integrated multichannel audio processor. Its role is to execute volume, attenuation, filtering, equalization, and tone-control functions while communicating with a host controller through I2C. Key features include selectable DC-blocking high-pass and de-emphasis filters, up to 13 user-programmable 28-bit biquad equalizers per channel, bass and treble tone control, soft volume updates, muting, and selectable ternary, binary, or phase-shift modulation for the PWM outputs. These functions support configurable channel routing and audio shaping without implementing the complete processing chain in external discrete circuitry. The integrated architecture reduces the number of separate control and signal-path components required in a multichannel audio design. Digital gain and attenuation extend across a 111 dB adjustment range using 0.5 dB steps, while the headphone output with jack detection simplifies headphone-interface implementations. The FFX driver identifies the device as a digital-audio and class-D-driver solution intended for compact audio systems. Typical uses include multichannel active speakers, soundbars, compact home-audio systems, amplified speakers, and powered audio accessories where several channels require coordinated volume, filtering, equalization, and output control. The I2C interface is particularly useful in consumer products because the host can configure processing parameters, update volume smoothly, invoke muting, and respond to headphone-jack detection through a serial control link. Designers should treat the filter, equalizer, modulation, and output-stage settings as a coordinated system rather than configuring each feature independently. Signal integrity, exposed-pad layout, thermal management, and decoupling should follow the manufacturer datasheet recommendations, especially where multiple PWM channels operate continuously. Verify the complete external-component and filter configuration in the target amplifier and enclosure system. This page consolidates the verified manufacturer feature description, distributor pricing and availability, package information, practical application guidance, and the available substitution evidence. It explicitly separates documented STA321TR capabilities from parameters that remain unavailable in the supplied source data, enabling engineers to make faster sourcing and design decisions without treating unverified specifications as guaranteed facts.

RFQ Contact
STA323W13TR - 2.1-Channel 10V 40W Audio System | STMicroelectronics
STA323W13TR

STA323W13TR - 2.1-Channel 10V 40W Audio System | STMicroelectronics

STMicroelectronics STA323W13TR is a 2.1-channel high-efficiency digital audio system with a 10 V to 36 V supply range, 24-bit DDX processing, 100 dB signal-to-noise ratio, and a 36-pin PowerSSO exposed-pad package. It supports input sample rates from 32 kHz to 192 kHz and can deliver up to 40 W in a suitable output configuration. A digital audio system combines digital signal processing, digital amplifier control, and a switching power-output stage in one IC. This integration sits between a digital audio source and loudspeaker outputs, reducing the number of discrete components required in compact home-theater, multimedia, active-speaker, and automotive entertainment systems. The integrated architecture also centralizes gain, modulation, protection, and power-stage control. The STA323W13TR supports three power-output configurations and accommodates 2.1-channel systems in which a subwoofer channel is combined with two main channels. Its 24-bit processing path provides a 100 dB signal-to-noise ratio and dynamic range, while the 32 kHz to 192 kHz input range covers CD, DVD, broadcast, computer, and modern high-resolution audio sources. Thermal protection, under-voltage protection, and short-circuit protection are integrated into the device. These safeguards are important because class-D power stages can develop high current during low-impedance loads, supply faults, or output-stage overstress. The PowerSSO-36 package provides an exposed thermal pad for transferring heat into the PCB copper area rather than relying on a separate heatsink in moderate-power designs. Typical applications include compact 2.1-channel active speakers, home-theater soundbar amplification, multimedia speaker systems, digital active loudspeakers, and embedded audio products. The IC is especially useful when the source already supplies a digital audio stream, because the digital processing and amplifier-control functions reduce the need for a separate codec, preamplifier, and class-D controller. Designers should confirm the selected output configuration, channel routing, speaker impedance, and allowable power before layout. The exposed pad, input/output capacitors, power-supply decoupling, and thermal copper must follow the manufacturer's reference layout. A thermal estimate should include the regulator dissipation at the actual supply voltage and load rather than relying only on the headline output-power rating. This product overview combines digital-audio system context, verified electrical highlights, drop-in replacement guidance, and implementation guidance. It is intended to help engineers evaluate power, routing, protection, thermal management, and package constraints before integrating the STA323W13TR into an audio product.

RFQ Contact
STA32613TR - 2.1-Ch 100dB SNR DDX Digital Audio Amplifier | STMicroelectronics
STA32613TR

STA32613TR - 2.1-Ch 100dB SNR DDX Digital Audio Amplifier | STMicroelectronics

The STMicroelectronics STA32613TR is a 2.1-channel high-efficiency digital audio system that combines digital audio processing, digital amplifier control and a DDX Power Output Stage in a single PowerSO-36 slug-up package. Key headline parameters are a 10 V to 36 V supply range, 100 dB SNR and dynamic range, and 24-bit DDX processing with input sample rates up to 192 kHz. The device is supplied in tape and reel as the TR suffix variant. An all-digital audio amplifier (often called a digital input amplifier or D2A/D3A stage) is an integrated circuit that accepts a digital audio stream, performs DSP inside the silicon, and drives speakers through a switching power stage. It sits in the hierarchy above analog class-D controllers: digital input -> digital audio processing -> DDX power output stage -> power management IC -> semiconductor. Because the amplifier consumes I2S/SAI data rather than an analog line signal, it eliminates the analog pre-amplifier chain and its associated distortion and noise. The STA32613 offers three programmable power output configurations at 10% THD, giving the designer a choice of channel balance between the two main speakers and the subwoofer. Digital gain and attenuation are adjustable in 0.5 dB steps, and the DSP block provides up to four programmable 28-bit biquad EQ filters per channel plus bass and treble tone control. Autmodes provide preset volume curves, loudness compensation and preset EQ settings, which shortens firmware bring-up time. Internally, the part is a system-on-chip: a 24-bit digital audio interface, an effects processing engine, volume and tone control blocks, and the DDX class-D output stage with integrated high-voltage switching transistors and a slung thermal pad. The 100 dB SNR figure is specified over a wide band including digital input paths, so system noise is dominated by the speaker and passive network rather than the amplifier itself. Typical applications are active soundbars and home-theater subwoofer/active-speaker combinations, compact 2.1 speaker sets, soundbar sub-amplifier modules, PC and TV speaker amplification, and automotive or industrial audio modules that need a digital audio input and high efficiency in a small footprint. When designing with the STA32613TR, remember that the external LC output network and the thermal pad layout dominate acoustic performance and reliability; a PowerSO-36 footprint without a properly stitched thermal via array can overheat the DDX stage at sustained high output power. The I2S/SAI clocking must also be configured so that the digital input rate stays inside the supported range for the selected sample rate. This page consolidates distributor pricing, verified electrical parameters, drop-in alternatives and practical layout guidance for the STA32613TR into a single engineering reference that goes beyond the manufacturer datasheet.

RFQ Contact
STA326JTR - 2-Channel DDX Power Amplifier | STMicroelectronics
STA326JTR

STA326JTR - 2-Channel DDX Power Amplifier | STMicroelectronics

The STMicroelectronics STA326JTR is a fully integrated 2-channel digital audio power processor with an on-chip DDX power output stage, supplied in a PowerSO-36 EPU package. It combines digital audio processing, digital amplifier control, and power-stage output in one device, providing a high-power all-digital amplification solution for compact audio systems. The verified distributor data identifies a 2-channel configuration, a 10 V to 36 V supply range, and a 36-pin PowerSO-36 EPU package. A fully integrated audio processor is an audio IC that accepts digital audio data, applies configurable processing and amplification control, and drives speakers through an integrated power output stage. Within the component hierarchy, the STA326JTR belongs to the digital class-D amplifier and audio-controller family, combining digital signal processing and power-management functions into a single package. This integration can reduce the number of separate signal-chain, control, and output-stage components required in a speaker system. The principal differentiators are its all-digital DDX architecture, integrated 2-channel power output, digital amplifier control, and 10 V to 36 V operating supply range. Combining these blocks avoids a discrete output-stage implementation while preserving digital control over the audio signal chain. The PowerSO-36 EPU format also provides a substantial thermal-dissipation surface, although final thermal performance still depends on copper area, the PCB thermal design, load impedance, output power, and ambient temperature. The STA326 architecture is intended to deliver high output power with high efficiency and controlled digital behavior. Its processing, control, and output functions operate as one integrated system rather than as unrelated blocks. This architecture is especially useful when a compact design requires accurate digital signal handling, flexible amplification control, and a high-power speaker output without implementing a conventional analog power-amplifier stage. Typical uses include powered speakers, active loudspeaker systems, compact home-audio products, multimedia speaker systems, and other equipment requiring two amplified channels. A system integrator must connect the digital audio interface, configure the device for the intended channel topology and speaker impedance, and implement the power-supply and output-network recommendations given in the manufacturer documentation. The device is also suitable for module-level audio designs where integrated processing and amplification simplify the signal path. The most important design consideration is thermal and power-supply planning. Operating near the verified 36 V upper supply limit does not establish permissible dissipation or output power by itself; those limits depend on the complete thermal environment and load conditions. Layout should provide the package with an effective thermal path, while the supply network should manage the switching and transient current generated by the integrated DDX output stage. This product summary combines the verified manufacturer and distributor information with practical selection and design guidance. It also identifies where additional engineering data are required rather than inventing output-power, frequency-response, protection, or thermal ratings that were not present in the supplied source material.

RFQ Contact
STA32813TR - 2.1-Channel DDX Digital Audio System | STMicroelectronics
STA32813TR

STA32813TR - 2.1-Channel DDX Digital Audio System | STMicroelectronics

The STMicroelectronics STA32813TR is a 2.1-channel high-efficiency digital audio system that combines a fully integrated digital audio processor, digital gain control and a DDX-class D power output stage in a single 36-pin PowerSO-36 surface-mount package. It accepts a wide analog supply range of 10 V to 36 V with digital supply up to 3.6 V, and delivers 2 x 40 W plus 1 x 80 W in a 2.1-channel configuration or 2 x 80 W in a two-channel configuration. A digital audio system (DDX) is a class-D audio amplifier in which the entire signal chain - PCM/analogue input conversion, digital volume control, filtering and the power stage - is handled digitally or with digital control of an analogue power stage. In the component hierarchy it sits above a power amplifier IC, inside the broader group of amplifier ICs and audio amplifiers, and it removes the discrete class-AB output transistors, bias resistors and output filter networks normally required for a multi-channel amplifier. Key features of the STA32813TR include a 100 dB signal-to-noise ratio and dynamic range, support for input sample rates from 32 kHz to 192 kHz, 24-bit DDX processing with four 28-bit filter stages, and digital gain or attenuation resolution of 0.5 dB per step. The power section is built from four independent half-bridges that can be reconfigured by digital control into 2.1-channel, stereo, bridge or single-channel power topologies. Because the output stage is switch-mode, the amplifier dissipates far less output-stage power than a class-AB design of comparable output, which reduces the size of the heatsink and the number of parallel supply rails needed in compact consumer systems. The device accepts both digital (I2S-like) and analogue audio paths depending on configuration, and the integrated volume control removes the need for a separate audio attenuator. Typical applications are flat-panel television and monitor audio, active speakers and soundbars, compact home theatre and multimedia speaker systems, and consumer audio receivers that need stereo plus subwoofer output from a single power device. When designing around the STA32813TR, respect the maximum 36 V supply voltage, keep the power-supply decoupling capacitors physically close to the supply pins, and confirm that the PCB copper area under the exposed pad is large enough for the dissipation at the chosen output power. The 36-pin PowerSO-36 footprint must be matched exactly; the parts are not pin-compatible with QFP-class amplifiers.

RFQ Contact
STA333BW13TR - 40W 2.1-Channel Digital Audio | ST
STA333BW13TR

STA333BW13TR - 40W 2.1-Channel Digital Audio | ST

The STMicroelectronics STA333BW13TR is a fully integrated 2.1-channel digital audio processor with 40 W output power, FFX digital amplification, and a PowerSSO-36 EPD package. It combines digital audio processing, amplifier control, and power output stages in one device, providing a compact solution for compact audio systems. The part is identified as a 2.1-channel, 40 W high-efficiency digital audio system Sound Terminal device. A digital audio amplifier is a power-management IC that accepts digital audio information and drives loudspeakers through internal switching power stages. Within the broader hierarchy, it combines digital signal processing, an audio amplifier, and a Class-D-style power conversion function. This integration reduces the number of separate digital-input, control, and output-stage components required in a loudspeaker design. The STA333BW13TR provides three channels of FFX processing, allowing two primary channels and a subwoofer channel to be handled within one audio system. The manufacturer describes the device as a fully integrated processor rather than a conventional analog audio amplifier. Its listed 100 dB SNR identifies the signal-to-noise performance class associated with the 2.1-channel 40 W configuration. Technical implementation is centered on the integrated FFX signal path, digital amplifier controls, and onboard power output stages. This architecture is intended to support high-efficiency digital amplification while simplifying source control. Because the device combines multiple functions, PCB design must treat the power, signal, control, and exposed thermal-pad connections as one integrated audio subsystem rather than as separate analog amplifier blocks. Typical uses include compact active speakers, multimedia speaker systems, home-audio products, soundbars, computer audio, and other 2.1-channel consumer equipment. The 40 W capability is particularly relevant where stereo playback must be combined with a subwoofer channel in one compact enclosure. The PowerSSO-36 EPD package also supports PCB-level thermal management through its exposed pad. When laying out the device, follow the pin-description table and recommended application circuit in the manufacturer datasheet. Keep high-current output connections compact, provide clean input and control routing, and thermally couple the exposed pad to a suitable copper area. The exact supply limits, output configurations, and protection thresholds should be confirmed against the manufacturer datasheet before final schematic release. This product reference combines the verified operating class, output class, channel count, processing architecture, package, and sourcing links with practical application and layout guidance. It also identifies the key replacement question engineers face when evaluating the STA333BW base family designation against the orderable STA333BW13TR version.

RFQ Contact
STA333BWJ13TR - 2.1-Ch 40W Audio Processor | STMicroelectronics
STA333BWJ13TR

STA333BWJ13TR - 2.1-Ch 40W Audio Processor | STMicroelectronics

The STMicroelectronics STA333BWJ13TR is a 2.1-channel digital audio system Sound Terminal with integrated class-D amplification, digital audio processing, and a maximum output capability of 40 W in a PowerSSO-36 package with an exposed pad. It combines an audio processor, power-stage control, modulation, and protection functions into a compact speaker-drive solution for consumer audio equipment. A fully integrated digital audio processor is a mixed-signal audio IC that accepts digital audio information and controls an efficient power-conversion stage that drives loudspeakers. In the product hierarchy, the STA333BWJ13TR belongs to the digital audio processor and audio amplifier classes, then to integrated audio ICs and signal-processing semiconductors. Its Sound Terminal architecture reduces the external circuitry required for a conventional digital-input class-D audio output stage. The principal features include support for 2.1-channel audio, a 40 W maximum-output configuration, digital audio conditioning and interface functions, and an exposed-pad PowerSSO-36 package. The integrated processor provides a compact implementation for applications requiring more than a mono amplifier while retaining a single amplifier package. The exposed pad supports heat transfer from the power stage to the PCB when the package is properly soldered and thermally coupled. STMicroelectronics describes the device as a fully integrated processor using the Sound Terminal architecture rather than as a conventional discrete-output audio amplifier. Its internal digital control and power-stage organization allow the external system to focus on source selection, signal routing, and loudspeaker integration. Thermal and acoustic performance remain dependent on PCB copper, power-supply capability, speaker impedance, load configuration, and the surrounding enclosure. Typical uses include compact stereo and 2.1-channel audio systems, soundbars, active speakers, consumer television equipment, and powered multimedia products. The 2.1-channel architecture is particularly relevant where a subwoofer channel is required but a discrete subwoofer amplifier would otherwise add another power stage and package. Its integrated format can simplify PCB partitioning while leaving enclosure, thermal, and acoustic tuning to the product designer. For PCB implementation, use the manufacturer pin-description table and the exposed-pad land pattern exactly as shown in the datasheet. Treat the exposed pad as a thermal and electrical feature, provide adequate input and output decoupling, and keep the power-loop current path compact. Verify speaker impedance, power-supply headroom, thermal rise, and amplifier protection behavior before production release. This page combines package and product classification information with design guidance, practical application analysis, sourcing questions, and a conservative drop-in-replacement review. The alternatives section is intentionally limited to a documented same-family part because verified pin-to-pin substitutes were not identified.

RFQ Contact
STA333IS - 2-Ch 10W Digital Audio Amplifier | STMicroelectronics
STA333IS

STA333IS - 2-Ch 10W Digital Audio Amplifier | STMicroelectronics

The STMicroelectronics STA333IS is a 2-channel, fully integrated digital audio processor and power amplifier in a 30-pin CSP/WFBGA package, delivering up to 10 W per channel into a 4 ohm load from a single chip. It combines digital audio processing, digital amplifier control and an ST FFX power output stage into one die, so a complete all-digital Class-D speaker drive path needs only the STA333IS, a few passive networks and the speaker itself. A digital input amplifier IC such as the STA333IS belongs to the class-D / digital power amplifier family, which sits inside the broader hierarchy of audio ICs, audio signal processing and ultimately discrete semiconductor devices. Unlike a traditional analog Class-AB output stage, an FFX digital amplifier accepts a digital audio stream, performs gain, volume and tone control in the digital domain, and drives the load with a high-efficiency switched output stage. That shifts amplifier efficiency from the analog stage into the modulator, giving noticeably lower heat dissipation and higher usable output power from a small package. Key features of the device include 2-channel operation, an integrated FFX power output stage rated around 10 W per channel in Class-AB-equivalent behaviour for the version family, on-chip digital volume and tone control, short-circuit and thermal protection on the output stage, and a very small surface-mount footprint suitable for space-constrained portable and consumer audio products. Because the audio path is digital, the amplifier reproduces the source signal without the crossover distortion and thermal modulation associated with analog output stages, and no analog pre-amplifier is required ahead of it. Technically, the STA333IS integrates a digital audio processor that accepts S/PDIF or I2S-style digital streams, applies configurable gain and processing, and hands the result to the FFX modulator and output stage. The result is a compact, high-efficiency solution in which the DSP processing and the power stage share the same silicon, cutting the component count of a conventional digital-input, analog-output speaker design by several discrete parts and reducing board area in soundbars, wireless speakers and docking stations. Typical applications include Bluetooth and Wi-Fi speaker systems, soundbars, portable Bluetooth speakers, smart-home audio nodes, multi-room audio terminals and compact consumer audio products where a small amplifier footprint, efficient power delivery and digital volume control are required. One key design consideration is thermal management: the integrated output stage dissipates the majority of the power as heat in the package, so the exposed pad must be soldered to a properly sized copper area on a 2-layer or 4-layer board. A second consideration is the digital input interface: the STA333IS requires a digital audio source and a valid clock, so it cannot be driven from a legacy analog line input without an external ADC or codec. This page consolidates verified distributor and manufacturer information, package and pin data, drop-in alternatives in the same Sound Terminal family, and practical design notes that are not collected in a single place on the manufacturer product page.

RFQ Contact
STA333ML13TR - 2-Channel 20W DDX Audio Amplifier | STMicroelectronics
STA333ML13TR

STA333ML13TR - 2-Channel 20W DDX Audio Amplifier | STMicroelectronics

STMicroelectronics STA333ML13TR is a two-channel, microless Sound Terminal digital audio system with integrated high-efficiency Class-D amplification, 2 x 20 W output into 8 ohms at 18 V, and a PowerSSO-36 exposed-pad package. The device supports a 4.5 V to 20 V supply range and accepts digital audio through an I2S interface. A Sound Terminal is a highly integrated audio subsystem that combines input decoding, digital signal processing, volume control, and power-amplifier drive functions on one die. This integration places it between a digital audio interface, a power management system, and a loudspeaker or line-driver stage. Unlike a conventional analog audio amplifier, the STA333ML13TR can operate without an external microcontroller while preserving digital control over the signal path. Its principal features include two 24-bit DDX channels, 100 dB signal-to-noise ratio and dynamic range, selectable input sample rates from 32 kHz to 48 kHz, and automatic zero-detect mute. The DDX architecture provides high-efficiency digital power amplification while supporting two output configurations. Automatic mute reduces audible output during digital zero conditions, while the exposed pad improves heat transfer from the power-amplifier section. The STA333ML13TR integrates decoding, filtering, volume control, and amplification within one device, reducing the component count required for a digital speaker system. Its I2S-oriented architecture is suited to source devices that can provide 24-bit digital audio, including portable media equipment, audio docking systems, consumer electronics, and compact powered speakers. The 18 V operating condition cited for 2 x 20 W output into 8 ohms establishes the supply level required for the highest stated output configuration. Power-SSO-36 construction requires attention to both electrical and thermal design. The exposed thermal pad must be connected to the ground plane according to the manufacturer's package guidance, and adequate copper area must be provided to remove heat from the amplification stage. Input, output, supply, and decoupling connections should be routed to minimize switching noise and avoid unintended interaction between the two amplified channels. This page combines the manufacturer product information, distributor listings, package details, and application-specific engineering guidance. It highlights the distinction between the integrated STA333ML family and conventional discrete amplifier chains, helping engineers assess power-supply capability, interface compatibility, thermal implementation, and functional replacement options before committing a PCB layout. The most important design trade-off is integration versus flexibility. The STA333ML13TR reduces external circuitry and supports autonomous digital audio operation, but its fixed integrated architecture may be less suitable than a discrete amplifier chain when designers require independent analog gain stages, unusual output filtering, or custom thermal and power configurations. Verify the complete pin description, recommended PCB layout, output-filter requirements, and electrical limits in the manufacturer datasheet before layout release.

RFQ Contact
STA333MLJ13TR - 2-Channel 20W Class-D Audio | STMicroelectronics
STA333MLJ13TR

STA333MLJ13TR - 2-Channel 20W Class-D Audio | STMicroelectronics

STMicroelectronics STA333MLJ13TR is a fully integrated, two-channel Class-D audio amplifier processor rated for 4.5 V to 20 V operating supply and 20 W per channel. The device is packaged in a 36-pin PowerSSO surface-mount package with an exposed pad and supplied in tape-and-reel packaging. Its operating temperature range is 0°C to 70°C, and the manufacturer lists the component as active. A Class-D audio power amplifier is a semiconductor that uses transistor switching to deliver energy to a loudspeaker with high efficiency and low output-stage dissipation. Within the broader product hierarchy, the STA333MLJ13TR is a fully integrated audio amplifier processor, which combines Class-D output-driver functionality with audio signal-processing and interface capabilities. This integration can simplify a stereo amplifier design while reducing the number of external power-stage components. The two-channel architecture supports simultaneous left- and right-channel amplification, making the device suitable for stereo audio products. Its 4.5 V to 20 V supply range accommodates portable, consumer, multimedia, and automotive-style audio systems operating from suitable battery or regulated rails. The listed 20 W per-channel rating is a key selection criterion, but designers should confirm headroom, thermal limits, speaker impedance, and the manufacturer’s recommended output-filter topology for the intended enclosure and thermal environment. The PowerSSO-36 package provides a compact surface-mount footprint and an exposed thermal pad for distributing heat into the PCB copper area. Thermal performance depends on the PCB land pattern, copper coverage, airflow, ambient temperature, output power, and load impedance. Input filtering, feedback or mode-control components, supply decoupling, output inductors, and output capacitors should be implemented exactly as directed by the manufacturer datasheet to preserve the intended amplification behavior and reliability. Typical uses include compact stereo audio amplifiers, multimedia speakers, active speakers, home-audio systems, and powered speaker modules. The 36-pin PowerSSO arrangement is appropriate where a multi-channel Class-D solution must be mounted on a high-density PCB rather than through-hole hardware. Its integrated processing architecture can also reduce board area when compared with a discrete approach that requires separate output stages. Before layout, confirm that the exposed pad is tied to the required ground and thermal plane, input and output connections are separated to minimize feedback into sensitive audio paths, and the supply network provides adequate transient current. The choice should be based on the required channel count, continuous and peak output power, supply voltage, speaker impedance, thermal environment, and acoustic target. This product page combines the confirmed electrical and packaging facts with pin-compatible sourcing guidance, practical thermal and layout guidance, and decision criteria for comparing replacement options.

RFQ Contact
STA333SML - 2-Channel Digital FFX Power Amplifier | STMicroelectronics
STA333SML

STA333SML - 2-Channel Digital FFX Power Amplifier | STMicroelectronics

The STMicroelectronics STA333SML is a two-channel, fully integrated digital audio processor with digital amplifier control and an FFX power output stage. The device combines digital audio processing and amplification in one 30-ball, 3.24 mm × 2.57 mm CSP package, creating a high-power, high-efficiency solution for all-digital amplification. The verified source data identifies it as an audio IC with two channels and an integrated FFX output stage. A digital Class-D audio amplifier is a power-management IC that accepts digital audio information and uses an internal digital signal-processing path, control logic, and switching output stage to reproduce analog sound at a speaker load. Unlike a conventional analog audio amplifier, an all-digital implementation performs audio processing and power-stage control within the same device. The STA333SML belongs to this integrated digital amplification category and is intended to reduce the external signal-chain and amplifier-control complexity of multi-channel audio systems. The principal feature of the STA333SML is its integration of digital audio processing, digital amplifier control, and an FFX power output stage. This combination supports a high-power single-chip approach while retaining digital control over the amplification process. Its two-channel architecture allows it to drive left and right audio channels through a shared package. The verified distributor description explicitly classifies the part as an Audio Fully Integrated Processor with two channels, while the manufacturer describes high quality and high efficiency for all-digital amplification. The STA333SML is supplied in a compact 30-ball CSP measuring 3.24 mm × 2.57 mm. This package supports surface-mount assembly but creates a demanding PCB-layout task because the ball pitch and exposed power connections require careful land-pattern, thermal, and return-path design. Exact electrical ratings such as supply voltage, output power, modulation scheme, switching frequency, thermal resistance, and supported digital-audio interfaces are not stated in the supplied verified snippets and therefore must be confirmed in the manufacturer datasheet before design release. Typical application opportunities include compact stereo audio systems, soundbars, home-theater amplification, multimedia speakers, and other two-channel products that benefit from digital audio processing and a consolidated power-amplifier solution. In each case, the designer must verify the required digital-audio interface, sample rate, channel format, output-power target, load impedance, supply range, and thermal limits. A digital input implementation can also reduce analog routing between source devices and the output stage, provided the upstream source supports the interface expected by the device. The primary design consideration is PCB implementation. Because the verified package is a 30-ball CSP in only 3.24 mm × 2.57 mm, adequate soldering-profile control, ball-pad alignment, short power-current paths, and thermal via placement are essential. The power-supply network should be designed for the final output-power and channel-load combination, while input and return connections should minimize digital and power-path coupling. Exact component values and layout dimensions must follow the complete STMicroelectronics datasheet and reference design. This page consolidates the verified manufacturer description, distributor classification, package information, source links, and engineering checks for the STA333SML. It also distinguishes documented facts from parameters that still require confirmation. Because the supplied cross-reference search identifies no verified pin-compatible replacement, the alternatives section does not pad the result with electrically similar or differently packaged amplifier ICs that could not be guaranteed as drop-in devices.

RFQ Contact
STA333W13TR - 2-Channel 20V DDX Audio Amplifier | STMicroelectronics
STA333W13TR

STA333W13TR - 2-Channel 20V DDX Audio Amplifier | STMicroelectronics

STMicroelectronics STA333W13TR is a two-channel high-efficiency digital audio system Sound Terminal with integrated digital audio processing, digital amplifier control, and a DDX power output stage. It supports 24-bit input, 100 dB SNR and dynamic range, selectable sampling rates from 32 kHz to 192 kHz, and a supply range extending to 20 V. The device is supplied in a 36-terminal PowerSSO-36 EPD surface-mount package. A digital audio system combines digital signal processing, digital-to-analog conversion, and power-amplifier control into one integrated circuit. The STA333W13TR accepts digital audio data, performs the required signal conditioning and modulation, and drives stereo speakers through its integrated Class-D-style DDX output stage. This integration reduces the number of separate audio-processing and amplification blocks required in compact consumer equipment. Two power-output configurations are available, supporting two channels of binary PWM in stereo mode or two channels of ternary PWM. Binary PWM provides a conventional two-level drive, while ternary PWM can reduce switching-related distortion and improve efficiency in suitable amplifier architectures. The 24-bit processing path and 100 dB SNR provide ample headroom for high-fidelity consumer audio systems. The 32 kHz to 192 kHz input-rate range supports standard digital-audio sources through high-resolution playback systems. The integrated architecture avoids the signal-path mismatch and additional conversion stages that can arise when a digital audio processor and a separate power amplifier are combined. The STA333W13TR is particularly relevant where stereo playback, digital input, compact PCB area, and energy-efficient amplification are priorities. Typical uses include compact stereo speakers, home-audio systems, sound bars, portable entertainment equipment, and consumer audio products with digital signal sources. Its PowerSSO-36 EPD package requires careful PCB layout and adequate thermal design because the integrated output stage dissipates power during operation. The supply rails and output-filter requirements should be implemented according to the manufacturer’s reference circuit. For robust deployment, use short, wide power-loop paths, place input and output capacitors close to their intended terminals, and verify thermal performance at the maximum expected channel output power. Keep sensitive digital and analog routing away from high-current switching nodes. This page summarizes the core architecture, operating ranges, package information, application guidance, and replacement considerations for faster engineering evaluation.

RFQ Contact
STA335MLJ13TR - 2-Channel Stereo Class D Audio Amplifier | STMicroelectronics
STA335MLJ13TR

STA335MLJ13TR - 2-Channel Stereo Class D Audio Amplifier | STMicroelectronics

The STMicroelectronics STA335MLJ13TR is a 2-channel (stereo) Class D audio amplifier IC with integrated Sound Terminal signal processing, delivered in a 36-lead PowerSSO-36 EPD surface-mount package. It is a two-channel amplifier IC, with the surface-mount gull-wing lead geometry and 36 terminals specified for the PowerSSO-36 EPD outline. An audio amplifier IC is a discrete-semiconductor-free integrated block that reproduces an analog or digital audio signal at a usable output level. Class D refers to the output stage topology: the signal is switched between the supply rails and filtered into a linear output, which is why class D audio amplifiers achieve high conversion efficiency and low heat dissipation compared with class A or class B stages. When such a device also embeds digital audio conditioning, it belongs to the family of digital audio amplifiers or Sound Terminal devices, where decoding, volume control, bass management and power-stage drive are consolidated on one die. Key characteristics of this device include its two-channel stereo configuration, its integrated digital audio conditioning and interface capability, and its class D output stage. Because the digital processing is integrated, the host processor no longer has to perform bit-stream decoding or channel routing in software, which reduces both firmware load and system-level EMI risk. The package choice, PowerSSO-36 EPD, is a thermally enhanced surface-mount outline with an exposed thermal pad area that conducts heat away from the die into the PCB copper. Architecturally, the part combines a digital audio input path, embedded Sound Terminal processing, and two class D power output stages in a single monolithic device. This integration is the main technical differentiator versus discrete amplifier approaches: fewer external components mean a smaller bill of materials, a smaller PCB footprint, and fewer assembly joints to inspect. The trade-off is that the device is application-specific in its digital interface, so the host source and hardware design must match the ST reference configuration rather than being freely retargeted to any codec. Typical applications are compact stereo audio products such as sound bars, smart speakers, Bluetooth speaker systems, compact TV or monitor audio, and portable or panel-mount stereo products where a digital audio source is already available in the system. Design consideration: use the ST reference layout and the pin-description table in the manufacturer datasheet when assigning PCB tracks, and treat the exposed pad as a thermal and electrical connection, not just a heat spreader. This page consolidates the manufacturer part identity, distributor availability, drop-in alternatives, package details and practical design notes into a single engineering reference that goes beyond the raw catalogue entry.

RFQ Contact