Products (46,000+)

STA339BWTR - 2.1-Channel Digital Audio System | STMicroelectronics
STA339BWTR

STA339BWTR - 2.1-Channel Digital Audio System | STMicroelectronics

The STMicroelectronics STA339BWTR is a 2.1-channel high-efficiency digital audio system with integrated digital audio processing, digital amplifier control, and an FFX power output stage. It supports a 26 V operating supply range, has a 30 V absolute maximum supply rating, and is supplied in a 36-FSOP surface-mount package with an exposed pad. The device provides multiple power-output configurations, including two channels of ternary PWM in stereo mode and operation as three channels in a 2.1-channel system. A digital audio system is an integrated audio signal-chain IC that processes digital audio, controls amplification, and delivers power through an efficient output stage. Within the broader hierarchy, the STA339BWTR belongs to the digital amplifier class, which combines a digital signal processor, power-control logic, and speaker-drive circuitry in one package. Its FFX architecture is designed to provide high-quality, high-efficiency, all-digital amplification for compact audio products. Key features include a wide 26 V operating supply range, a 30 V absolute maximum rating, integrated digital audio processing, digital amplifier control, and an FFX power output stage. The FFX implementation supports ternary PWM output configurations for stereo or 2.1-channel operation. The manufacturer describes the STA339BW as a high-power single-chip solution intended to reduce the number of discrete components required in powered speaker systems. The device accepts digital audio information and uses its integrated processing and control functions to manage the amplifier channels. According to the manufacturer datasheet, specifications are evaluated under defined conditions including VCC = 18 V, 1 kHz signal frequency, 384 kHz switching frequency, 25°C ambient temperature, and an 8 ohm load unless otherwise specified. These conditions provide the reference point for interpreting the electrical and performance data. Typical applications include active speaker systems, compact consumer-audio products, sound bars, smart speakers, multimedia equipment, and other 2.1-channel installations where an integrated digital amplifier simplifies the signal path. The exposed-pad package also requires careful PCB layout for heat transfer from the power stage to the board copper. Designers should follow the manufacturer datasheet for decoupling, output filtering, thermal management, exposed-pad soldering, and loudspeaker-load requirements. In particular, the power-output configuration must be selected for the intended channel count and speaker impedance, and the PCB must provide adequate thermal copper around the exposed pad. Verify maximum supply voltage, current, and thermal limits against the selected operating mode. This page consolidates the verified manufacturer and distributor information, practical package and thermal guidance, pricing references, and a structured comparison of the available drop-in candidates. It is intended to help engineers confirm footprint, supply, power-output, and sourcing requirements before committing to a board design.

RFQ Contact
STA350B - 2.1-Channel Digital Audio Power Stage | STMicroelectronics
STA350B

STA350B - 2.1-Channel Digital Audio Power Stage | STMicroelectronics

The STMicroelectronics STA350B is a 2.1-channel high-efficiency digital audio system that combines digital audio processing, digital amplifier control, and an FFX power-output stage in one PowerSSO-36 package. It operates from a 24 V supply in the datasheet reference conditions and supports I2C and I2S interfaces for digital control and audio input. The device is designed for compact, high-efficiency multichannel audio systems. A Sound Terminal is an integrated audio subsystem rather than a conventional standalone power amplifier. Its functional hierarchy is digital audio processor, then digital amplifier controller, then FFX class-D power-output stage. Integrating these blocks allows a system designer to reduce the number of external amplifiers while retaining digital volume control, bass management, and channel-routing functions. The STA350B supports a two-channel digital-audio configuration with additional low-frequency capability for 2.1 systems. Key features include a 2.1-channel architecture, digital audio processing, an integrated digital amplifier controller, and the FFX high-efficiency output stage. The manufacturer datasheet presents its performance specifications at VCC = 24 V, f = 1 kHz, switching frequency fsw = 384 kHz, ambient temperature of 25 °C, and an 8 Ω load. These conditions are important when comparing amplifier output data because power, distortion, and efficiency can change with supply voltage, load impedance, and switching frequency. The STA350B accepts digital audio through I2S and is configured through I2C, making it appropriate for systems whose volume, routing, or sound-field processing is handled by a host controller or digital audio source. The integrated approach shortens the signal path between digital processing and power amplification while reducing external component count compared with a processor-plus-discrete-amplifier architecture. Typical applications include compact 2.1-channel speaker systems, soundbars, compact home-theater speakers, multimedia speaker platforms, and digital active-speaker products. The STA350B is particularly relevant where a small enclosure, efficient power conversion, and controlled digital audio behavior are more important than a conventional analog-input amplifier architecture. For PCB design, treat the exposed pad as both the electrical ground reference and a principal thermal path. Follow the manufacturer land-pattern, power-routing, decoupling, and thermal-pad guidance in the datasheet rather than relying only on the generic PowerSSO-36 outline. Verify amplifier stability, thermal rise, and acoustic performance in the finished enclosure. This page combines manufacturer identification, interface and package information, operating-condition references, application engineering guidance, and verified sourcing links. It also documents the absence of a confirmed pin-compatible substitute list rather than presenting unverified cross-brand parts as drop-in replacements.

RFQ Contact
STA350BTR - 2-Channel 50W Digital Audio System | STMicroelectronics
STA350BTR

STA350BTR - 2-Channel 50W Digital Audio System | STMicroelectronics

The STMicroelectronics STA350BTR is a fully integrated, 2-channel digital audio system processor with a high-efficiency FFX-power output stage, delivering 50 W per channel into 6 ohms from a 5 V to 26 V supply in a PowerSSO-36 surface-mount package. It combines digital audio processing, digital amplifier control, and power-stage functionality for compact 2.1-channel audio designs. A fully integrated digital audio system is a mixed-signal semiconductor category that combines an audio signal-processing path, digital control, and an efficient power-amplifier output stage. Within the broader hierarchy of audio ICs, interface ICs, and power-management devices, the STA350BTR is designed to reduce the component count and board area required by conventional digital Class-D audio solutions while maintaining digital control of the amplification stage. The primary verified ratings are 50 W per channel at 6 ohms, a 2-channel configuration, and a 5 V minimum supply voltage. The device supports supply voltages up to 26 V, operates from -20°C to +85°C, and is supplied in a 36-terminal PowerSSO surface-mount package. Its integrated architecture is intended for applications where high-efficiency digital amplification and controlled sound output are required in the same package. The STA350B family integrates digital audio processing, digital amplifier control, and an FFX-power output stage. This combination allows the controller and power-amplifier functions to reside on one device rather than requiring separate digital audio and analog-output blocks. That architectural consolidation can simplify board partitioning and provide a compact implementation for digital audio systems, although the complete pin assignments and detailed electrical characteristics are not present in the supplied source excerpts. Typical uses include 2.1-channel sound terminals, powered speakers, compact home-audio systems, multimedia equipment, and other audio products requiring two amplified outputs. The 50 W per channel rating at 6 ohms makes the device relevant to consumer-audio products that need more power than a conventional integrated headphone amplifier can provide, while the 26 V maximum supply permits use in higher-voltage amplifier architectures when all electrical and thermal limits are observed. A critical design consideration is heat management. The PowerSSO-36 package must dissipate the losses associated with high-power Class-D amplification, so exposed-pad layout, copper area, thermal vias, enclosure airflow, and clean speaker-filter selection can materially affect reliability. Designers should also confirm the complete pinout, acoustic tuning, digital interface configuration, and protection requirements against the manufacturer datasheet before layout release. This page consolidates distributor availability, verified electrical limits, pricing information, replacement guidance, and practical engineering considerations. It distinguishes confirmed specifications from unavailable data and avoids presenting unverified pin assignments or unsupported cross-brand equivalents as drop-in replacements, helping engineers evaluate the STA350BTR with fewer sourcing and design risks.

RFQ Contact
STA350BWTR - 36W 2.1-Channel Audio System | STMicroelectronics
STA350BWTR

STA350BWTR - 36W 2.1-Channel Audio System | STMicroelectronics

STMicroelectronics STA350BWTR is a 2.1-channel, high-efficiency digital audio system integrating digital audio processing, digital amplifier control, and an FFX-power output stage. It supports mono or stereo operation and is identified as a 36 W Class-AB audio solution in a 36-pin PowerSSO package with an exposed pad. The device is supplied in tape-and-reel packaging under the STA350BWTR ordering code. An integrated digital audio system combines several functions that are otherwise implemented as separate signal-chain blocks. These functions include digital audio processing, digital amplifier control, and the power-output stage. The STA350Bx family therefore belongs to the amplifier-IC and power-management-IC hierarchy while specifically serving powered-speaker and consumer-audio applications. The STA350BWTR is presented as a 2.1-channel solution with two-channel capability. Verified specifications are defined at a supply voltage of 24 V, a test frequency of 1 kHz, a switching frequency of 384 kHz, an ambient temperature of 25 °C, and an 8 Ω load unless otherwise specified. The listed 36 W output capability and high-efficiency architecture suit compact powered-speaker systems where useful acoustic output must be obtained from a limited power budget. The integrated digital processing and amplifier-control functions reduce the amount of external circuitry required compared with a discrete approach. The 384 kHz switching frequency identifies the device as a digitally controlled audio power system rather than a conventional analog-output amplifier. The 2.1-channel format supports common stereo-speaker arrangements augmented by a subwoofer, while the integrated FFX-power output stage provides the final power-conversion function. Typical uses include powered stereo speakers, multimedia speaker systems, compact home-audio products, sound bars, and other consumer systems requiring efficient digital audio amplification. The exposed-pad PowerSSO-36 package is particularly relevant to designs where heat removal from the power stage is a central PCB-layout concern. Designers should follow the manufacturer datasheet for the exact pin assignments, exposed-pad connection, input configuration, control interface, filtering requirements, and recommended external components. Thermal performance depends strongly on PCB copper area, the exposed-pad layout, enclosure heat dissipation, output level, load impedance, and the 24 V operating condition used for the stated specifications. This page consolidates the verified manufacturer and distributor information for STA350BWTR, including the published test conditions, package identification, price reference, product positioning, and practical selection considerations. It also distinguishes documented facts from parameters that still require confirmation from the complete manufacturer datasheet or an authorized source.

RFQ Contact
STA369BWSTR - 40W 2.1-Ch Digital Audio Amplifier | STMicroelectronics
STA369BWSTR

STA369BWSTR - 40W 2.1-Ch Digital Audio Amplifier | STMicroelectronics

STMicroelectronics STA369BWSTR is a fully integrated digital audio amplifier processor for 2.1-channel systems, delivering up to 40 W in a 36-pin PowerSSO exposed-pad package. It combines digital audio processing, digital amplifier control, and an FFX power-output stage within one device. Its operating supply range is 4.5 V to 21.5 V. A digital audio amplifier, also called a class-D amplifier, converts digital audio signals directly into high-efficiency speaker drive. The STA369BW belongs to the Sound Terminal family of integrated digital audio processors and uses STMicroelectronics FFX, or fully flexible amplification, technology. This integration reduces the number of discrete signal-chain and output-stage components required in a compact multimedia or home-audio system. The principal system characteristics include 2.1-channel operation, a 40 W output capability, digital audio processing, digital amplifier control, and an integrated FFX power stage. The 21.5 V maximum supply listed for the device accommodates higher-voltage power-amplifier operating environments, while the 4.5 V minimum supply supports lower-voltage system rails. Users must still verify load, thermal, and supply limits against the manufacturer application guidance for the selected channel configuration. Architecturally, the device places signal processing, amplifier control, and power conversion into a single package. This integrated approach can shorten the audio path and simplify board design compared with a discrete codec, DSP, modulator, and output-stage architecture. Its exposed-pad package also provides a direct thermal path from the power stage to the PCB, making copper-plane layout and thermal management essential in higher-output designs. Typical uses include compact home-theater systems, active speakers, multimedia monitors, soundbars, and other 2.1-channel consumer-audio products. The device is particularly relevant where a high-power subwoofer channel and two additional speaker channels share a controlled digital audio system. Host-controller integration allows system audio settings and amplifier behavior to be managed electronically. For implementation, follow the manufacturer datasheet for the exposed-pad connection, power-supply decoupling, digital input routing, speaker configuration, and thermal layout. Allow adequate copper around the exposed pad and use the specified input and output filtering networks to preserve signal quality, limit EMI, and maintain stable amplification. This product overview organizes the key operating data, drop-in replacement candidates, application guidance, and PCB design cautions into one engineering reference. It also identifies where package-specific pin assignments and secondary electrical parameters must be confirmed in the manufacturer datasheet before release to production.

RFQ Contact
STA369BWTR - 2.1-Channel Digital Audio Amplifier | STMicroelectronics
STA369BWTR

STA369BWTR - 2.1-Channel Digital Audio Amplifier | STMicroelectronics

STMicroelectronics STA369BWTR is a 2.1-channel high-efficiency digital audio system Sound Terminal IC with digital audio processing, digital amplifier control, and an FFX power output stage integrated into one package. The device supports power supplies of 3.3 V and 22 V, operates from -20 °C to 85 °C, and is supplied in a 36-terminal PowerSSO-36 EPD surface-mount package. Its integrated digital architecture is intended to reduce the component count and simplify implementation in compact consumer audio systems. An audio digital amplifier IC is a power-management and signal-processing device that converts digital audio signals into efficient class-D-style power-stage outputs. The STA369BW belongs to the Sound Terminal family, which combines digital audio processing, amplifier control, and FFX fully flexible amplification technology. This integrated hierarchy places the device between a digital audio source and powered loudspeakers, allowing a complete 2.1-channel audio path to be implemented in a compact design. Key features include two-channel digital audio processing, high-efficiency digital amplification, I2C and I2S interfaces, and a 36-terminal PowerSSO-36 EPD package. The 22 V power supply supports higher-power loudspeaker output stages, while the 3.3 V supply supports the digital control and signal-processing domain. The reported operating temperature range is -20 °C to 85 °C, making the device suitable for consumer equipment where indoor ambient temperatures are typical. The FFX architecture allows the amplifier system to combine digital processing with a power output stage in a single-chip solution. Digital audio data is received through the I2S interface, while I2C provides the control path for configuration and operating parameters. This division of functions helps designers build a 2.1-channel amplifier without implementing separate DSP, control, and power-amplifier blocks on the main board. Typical applications include compact home-audio systems, active speakers, soundbars, multimedia speakers, and other 2.1-channel consumer audio products. The integrated digital control and amplification approach can reduce board area and simplify firmware management. The 36-terminal exposed-pad package still requires careful PCB layout, adequate thermal copper, and verified power-supply decoupling to preserve audio performance. The primary design consideration is ensuring that the 3.3 V and 22 V supply rails have appropriate voltage tolerance, noise performance, and decoupling. The exposed pad and power-output architecture should be evaluated against the required loudspeaker load and thermal environment before production release. Designers should use the manufacturer datasheet and reference layout for the exact STA369BW variant rather than treating generic audio-amplifier layouts as equivalent. This product data combines the manufacturer datasheet and product-page identity, distributor availability information, package details, and the supplied cross-reference evidence. It also distinguishes verified STA369BWTR information from specifications that were not present in the supplied source data, avoiding unsupported assumptions about electrical ratings or replacement compatibility.

RFQ Contact
STA381BW - 2.1-Channel Digital Audio Amplifier | STMicroelectronics
STA381BW

STA381BW - 2.1-Channel Digital Audio Amplifier | STMicroelectronics

STMicroelectronics STA381BW is a 2.1-channel high-efficiency digital audio system integrating digital audio processing, digital amplification, an FFX power output stage, headphone output, and 2 Vrms line outputs in a 48-pin VQFN package. It supports a wide 26 V operating supply range, with a 30 V absolute maximum rating, and is controlled through an I2C interface with a selectable device address. A digital audio amplifier is an audio IC that accepts a digital audio stream, performs signal processing and amplification, and drives speakers or line-level outputs with high efficiency. In the broader power-management and signal-processing hierarchy, the STA381BW combines a digital audio processor, Class-D-style digital power amplification, headphone circuitry, and integrated speaker-output functionality to reduce the component count of a 2.1-channel audio system. The STA381BW is designed to deliver up to 2 x 20 W into 8-ohm speakers at an 18 V supply in the 2.0-channel BTL configuration described by STMicroelectronics application note AN3959. This output capability makes it applicable to compact home-theater, multimedia, active-speaker, and digital active-speaker products. Its integrated headphone and 2 Vrms line outputs also allow the same device to support additional listening paths without a separate output amplifier for every function. The 2.1-channel architecture supports integration of a stereo or multichannel digital source, sound-field processing, and two amplified speaker channels. Digital processing and control through I2C allow host software to configure the device address and operating behavior. The integrated FFX power stage is intended to improve conversion efficiency and reduce power dissipation compared with a conventional linear output stage, particularly when the output voltage swing required by the speaker load is relatively low. The VQFN-48 package requires careful PCB layout because its exposed thermal area provides the principal heat-transfer path from the power stage. Input, output, supply, and ground connections must follow the manufacturer layout guidance, while decoupling should be placed close to the relevant pins. The application note identifies a 2.0-channel BTL demonstration board based on the STA381BW and STA381BWS, providing a useful reference for power routing, speaker connections, control interfacing, and thermal implementation. Design trade-offs include the 26 V operating limit, the 30 V absolute maximum rating, and the thermal requirements of a high-power multichannel amplifier. Designers should verify the maximum transient supply voltage, configure protection for exposed speaker outputs, and confirm that the PCB copper and thermal pad support the intended continuous output power. This page consolidates the verified product capabilities, application-note data, source links, and engineering considerations into a structured guide for evaluating the STA381BW in digital active-speaker designs.

RFQ Contact
STA381BWTR - 2.1-Channel Digital Audio Amplifier | STMicroelectronics (Tape & Reel)
STA381BWTR

STA381BWTR - 2.1-Channel Digital Audio Amplifier | STMicroelectronics (Tape & Reel)

STMicroelectronics STA381BWTR is a 2.1-channel high-efficiency digital audio system integrating digital audio processing, digital amplification, an FFX power output stage, headphone output, and 2 Vrms line outputs in a 48-pin VQFN package. It supports a wide 26 V operating supply range, with a 30 V absolute maximum rating, and is controlled through an I2C interface with a selectable device address. A digital audio amplifier is an audio IC that accepts a digital audio stream, performs signal processing and amplification, and drives speakers or line-level outputs with high efficiency. In the broader power-management and signal-processing hierarchy, the STA381BWTR combines a digital audio processor, Class-D-style digital power amplification, headphone circuitry, and integrated speaker-output functionality to reduce the component count of a 2.1-channel audio system. The STA381BWTR is designed to deliver up to 2 x 20 W into 8-ohm speakers at an 18 V supply in the 2.0-channel BTL configuration described by STMicroelectronics application note AN3959. This output capability makes it applicable to compact home-theater, multimedia, active-speaker, and digital active-speaker products. Its integrated headphone and 2 Vrms line outputs also allow the same device to support additional listening paths without a separate output amplifier for every function. The 2.1-channel architecture supports integration of a stereo or multichannel digital source, sound-field processing, and two amplified speaker channels. Digital processing and control through I2C allow host software to configure the device address and operating behavior. The integrated FFX power stage is intended to improve conversion efficiency and reduce power dissipation compared with a conventional linear output stage, particularly when the output voltage swing required by the speaker load is relatively low. The VQFN-48 package requires careful PCB layout because its exposed thermal area provides the principal heat-transfer path from the power stage. Input, output, supply, and ground connections must follow the manufacturer layout guidance, while decoupling should be placed close to the relevant pins. The application note identifies a 2.0-channel BTL demonstration board based on the STA381BWTR and STA381BWTRS, providing a useful reference for power routing, speaker connections, control interfacing, and thermal implementation. Design trade-offs include the 26 V operating limit, the 30 V absolute maximum rating, and the thermal requirements of a high-power multichannel amplifier. Designers should verify the maximum transient supply voltage, configure protection for exposed speaker outputs, and confirm that the PCB copper and thermal pad support the intended continuous output power. This page consolidates the verified product capabilities, application-note data, source links, and engineering considerations into a structured guide for evaluating the STA381BWTR in digital active-speaker designs.

RFQ Contact
STA50013TR - 60W Stereo Class D Amplifier | STMicroelectronics
STA50013TR

STA50013TR - 60W Stereo Class D Amplifier | STMicroelectronics

The STMicroelectronics STA50013TR is a quad half-bridge Class D audio power amplifier IC rated for 60 W per channel into 8 ohms, with a 10 V to 36 V supply range and a 36-pin PowerSO-36 surface-mount package. It can operate as a 2-channel stereo or 4-channel quad output-stage device, combining four complementary DMOS half bridges with CMOS-compatible logic inputs. A Class D amplifier is a switching power amplifier that uses pulse-width modulation to drive output transistors continuously. Compared with a linear audio amplifier, this architecture can provide high output power with lower conduction losses because the internal MOSFETs spend most of their time in low-resistance switching states. In this device, the quad half-bridge arrangement allows one package to support multiple speaker channels in audio systems, automotive equipment, and powered speaker designs. Key features include 60 W output power per channel into an 8-ohm load, operation from 10 V to 36 V, and complementary DMOS output stages with an on-resistance of 200 mOhm. The output stage includes thermal protection and thermal warning functions, while output overvoltage and undervoltage protection help prevent operation outside the intended output conditions. CMOS-compatible logic inputs simplify connection to a system controller or audio processor. The STA50013TR combines four configurable half bridges rather than integrating a conventional analog voltage amplifier and output stage in each channel. This makes it suitable for bridge-tied speaker loads, where each speaker is driven differentially. The 200 mOhm complementary DMOS output stage is the central switching element, while the BCDMOS process supports the combination of high-voltage handling, logic functions, and power output transistors in one integrated circuit. Typical uses include car-audio and automotive audio amplification, powered speakers, home-audio systems, portable installations, and industrial sound equipment. The quad configuration can also be arranged as four independent channels or combined into two stereo channels. Thermal design, speaker impedance, supply capability, and output filtering remain important because the amplifier dissipates substantial power during high-level operation and switching edges can generate high-frequency electromagnetic energy. For a new design, confirm the complete pin configuration in the manufacturer datasheet, follow the recommended input, supply, and output-filter networks, and place the exposed thermal area over an uninterrupted copper region. Because the device is listed as obsolete by one technical source while distributor inventory is also shown, verify current assembly life-cycle status before committing a new production design. A currently supported product should be selected for new production when possible. This page summarizes the principal electrical ratings, protection functions, package characteristics, and application considerations of the STA50013TR. It also documents the practical absence of a confirmed pin-to-pin drop-in substitute, helping engineers compare this part against newly proposed amplifier ICs without assuming that a similar wattage rating guarantees PCB compatibility.

RFQ Contact
STA501013TR - 40V 3.5A Class D Half-Bridge | STMicroelectronics
STA501013TR

STA501013TR - 40V 3.5A Class D Half-Bridge | STMicroelectronics

STMicroelectronics STA501013TR is a 40 V, 3.5 A mono Class D power half-bridge amplifier IC packaged in PowerSO-36. The device combines a complementary DMOS output stage, CMOS-compatible logic inputs, thermal protection, thermal warning, and under-voltage protection. It is designed for efficient audio-power conversion and supports a listed output capability of 50 W into 8 ohms. A Class D half-bridge amplifier is a switching power amplifier that uses pulse-width modulation to drive an output stage efficiently. A half-bridge contains two coordinated switching paths rather than the complete output network required for a full bridge. In motor, audio, and transducer applications, this topology provides high current drive with lower conduction loss than a linear output stage, although output filtering and careful layout remain important. Key device characteristics include a 40 V maximum rating, 3.5 A output-current capability, 200 mΩ MOSFET on-resistance, CMOS-compatible control inputs, and integrated thermal and under-voltage protection. The PowerSO-36 package provides 36 terminals and supports surface-mount assembly. The complementary DMOS architecture alternates current between the two switching devices, while the thermal warning output gives the host system an early indication that operating conditions are approaching the device’s thermal limit. The STA501013TR is identified as a one-channel mono Class D amplifier. Its switching output must be connected through an appropriate LC output-filter network when driving a loudspeaker or other inductive load. The filter suppresses the high-frequency switching energy inherent to Class D operation and should be selected using the actual switching frequency, load impedance, attenuation requirement, and permissible group delay for the target system. Typical uses include compact audio amplifiers, powered speakers, subwoofer amplification, motor and actuator drivers, and other load systems that need efficient high-current drive. Thermal design is especially important because Class D efficiency still does not eliminate all output-stage loss. The PCB copper area, exposed thermal interface, ambient temperature, switching frequency, output current, and load determine junction temperature, so a production design should reproduce the worst-case audio or motor duty cycle rather than rely on a no-load calculation. For PCB implementation, place the high-current output paths compactly and use wide copper conductors to minimize parasitic resistance and inductance. Keep the switching node small, connect the output filter close to the amplifier pins, and provide low-impedance supply decoupling. The manufacturer datasheet should be used to assign all 36 terminals and configure the IN, PWM or logic-control, bootstrap, ground, power, protection, and diagnostic connections exactly as specified for the selected topology. This page consolidates the verified electrical ratings, protection features, application guidance, sourcing workflow, and design considerations for engineers evaluating the STA501013TR. It also distinguishes documented device characteristics from parameters that require confirmation from the full manufacturer datasheet before schematic release or production qualification.

RFQ Contact
STA501A - 45V 4A Dual Power Half-Bridge | STMicroelectronics
STA501A

STA501A - 45V 4A Dual Power Half-Bridge | STMicroelectronics

The STMicroelectronics STA501A is a 45 V, 4 A double power half-bridge integrated circuit in the PowerSO-36 package. It is a monolithic dual half-bridge output stage built with Multipower BCD technology, intended for audio amplifier output stages, particularly high-efficiency digital amplifier systems. The verified distributor listing identifies the device as a 45 V, 4 A double power half-bridge, while the manufacturer-related datasheet listing describes a 45 V, 3.5 A double power half-bridge implementation. The STA501A belongs to the power-amplifier IC hierarchy: it is a dual half-bridge power stage, a class of audio power amplifier output driver, and ultimately a power-management IC with integrated complementary DMOS output devices. Its CMOS-compatible logic inputs simplify control from an all-digital audio amplifier controller. The output stage is designed to drive loudspeaker loads in mono or bridge-related configurations when paired with suitable modulation, filtering, and protection circuitry. Key features include Multipower BCD technology, complementary DMOS output stages, CMOS-compatible logic inputs, thermal protection, and thermal warning. The STA501A is suitable for audio systems requiring a high-voltage, high-current output stage, including Class-D and DDX-style amplifier platforms. Its PowerSO-36 package provides a surface-mount solution for power amplifier boards. The device requires careful attention to supply voltage, output current, thermal dissipation, gate-drive timing, and speaker-load limitations. Because the verified results do not provide complete electrical tables, pin assignments, exact output-power curves, or validated drop-in equivalents, those details should be confirmed against the official STMicroelectronics datasheet before design release. Typical uses include high-efficiency mono audio amplifiers, multi-channel audio power modules, digital amplifier output boards, and consumer or professional audio products. The STA501A is most appropriate when the system already provides the digital PWM controller and only requires a robust integrated power-output stage. This page consolidates the verified manufacturer and distributor descriptions, identifies the documented electrical envelope, and separates confirmed characteristics from parameters that still require datasheet verification. That distinction is important because package appearance alone does not establish drop-in compatibility.

RFQ Contact
STA501A13TR - 4A 45V Audio Power Amp | STMicroelectronics
STA501A13TR

STA501A13TR - 4A 45V Audio Power Amp | STMicroelectronics

STMicroelectronics STA501A13TR is a 4 A, 45 V double power half-bridge audio amplifier IC designed for the output stage of a mono All-Digital High Efficiency amplifier. The device is housed in a PowerSO-36 package and can deliver 50 W into an 8 ohm load at 30 V supply with 10% total harmonic distortion. Its complementary DMOS output stage, MultiPower BCD technology, CMOS-compatible logic inputs, and thermal protection make it suitable for high-power audio systems. A power half-bridge is a switched audio output topology that uses two driver channels to develop voltage across a speaker load. The STA501A13TR belongs to the broader class of audio amplifier ICs, which combines power-semiconductor output stages with control logic in one integrated device. By replacing discrete driver and MOSFET stages with a MultiPower BCD circuit, it simplifies the design of high-efficiency mono Class-D amplifiers while preserving a compact system-level implementation. The principal specifications are a 45 V maximum supply identified by the product listing and a nominal output-current capability of 4 A. The manufacturer datasheet excerpt states that minimum input pulse-width distortion is 200 m and that the output uses a complementary DMOS stage. Additional listed protections include thermal protection, while the 50 W output capability at 30 V and 8 ohms defines the intended high-power audio operating point. The device is intended for a mono DDX amplifier output stage rather than a conventional small-signal signal amplifier. Its high supply-voltage rating and current capability suit professional-audio power stages, consumer home-theater amplification, and automotive sound systems. The CMOS-compatible logic interface also allows the output stage to be controlled by a digital audio modulator or other digital signal-processing circuitry without requiring high-voltage gate-drive signals. Because power half-bridge stages can dissipate substantial heat during real speaker operation, PCB layout and thermal management are as important as electrical performance. The PowerSO-36 package must be connected to an adequate thermal copper area, and the power loop should use very short, wide traces. Designers should also account for inductor resistance, switching losses, speaker impedance, and thermal protection behavior rather than relying only on the nominal 4 A output rating. This page combines the manufacturer-datasheet performance point with practical guidance for selecting and implementing the amplifier. It distinguishes the STA501A13TR from the identified STA501A13TR-1A related variant, outlines the limits of the verified drop-in candidate, and focuses on the design decisions that determine usable output power, distortion, heat dissipation, and PCB reliability in a high-power mono audio system.

RFQ Contact
STA502A - 60W Mono Class-D Amplifier | STMicroelectronics
STA502A

STA502A - 60W Mono Class-D Amplifier | STMicroelectronics

The STMicroelectronics STA502A is a 60 W mono Class-D audio power amplifier with a 10 V to 36 V supply range, housed in an exposed-top PowerSO-36 package. It combines a one-channel audio output architecture with CMOS-compatible logic inputs, standby support, thermal protection, and a MultiPower BCD implementation featuring a complementary DMOS output stage. A Class-D audio amplifier is a switching power amplifier within the broader amplifier IC and audio signal-chain hierarchy. Unlike a linear audio amplifier, it drives the speaker through a switching output stage, enabling high output power with lower internal power dissipation than a comparable linear stage. The STA502A targets mono audio systems where efficient power delivery, compact packaging, and integrated protection are important design considerations. Key features include a maximum output-power rating of 60 W, a 10 V to 36 V supply-voltage range, standby operation, and thermal protection. The exposed top pad supports heat transfer into the PCB copper area. The published feature summary also identifies CMOS-compatible logic inputs, MultiPower BCD technology, and a complementary DMOS output stage with a stated minimum input-output pulse-width distortion of 200 m. Technically, the device integrates its class-D output circuitry into one package, reducing the number of external power transistors normally associated with a discrete amplifier design. The 36-pin PowerSO-36 exposed package concentrates the thermal and electrical interface in a surface-mount format. Designers must nevertheless provide adequate input, output, supply, and decoupling components exactly as required by the manufacturer application guidance. Typical uses include mono speaker systems, powered audio equipment, industrial audio products, embedded sound systems, and compact consumer audio equipment operating from a suitable DC supply. In these applications, the 60 W capability supports higher-power speaker drive, while the Class-D architecture reduces the heat generated within the amplifier compared with an equivalent linear output stage. The exact speaker compatibility remains dependent on supply voltage, load impedance, thermal conditions, and output-filtering requirements. A critical design consideration is thermal management. Because the package exposes its top pad, layout should provide a continuous thermal copper region, adequate via arrays, and a correctly sized thermal interface as specified by the manufacturer. Output filtering, speaker wiring, supply decoupling, and protection against inductive loads should also be implemented according to the datasheet rather than inferred from generic Class-D guidance. This page consolidates verified distributor listings, the available datasheet specifications, package information, sourcing links, and explicit data gaps into one engineering-focused reference. It distinguishes confirmed STA502A characteristics from parameters that still require datasheet or distributor confirmation, helping engineers evaluate suitability without filling missing electrical values with assumptions.

RFQ Contact
STA50613TR - 40V 4A Quad Class-D Half-Bridge | STMicroelectronics
STA50613TR

STA50613TR - 40V 4A Quad Class-D Half-Bridge | STMicroelectronics

STMicroelectronics STA50613TR is a 40 V, 4 A quad power half-bridge audio amplifier IC configured for mono or stereo Class-D speaker drive in a 36-lead PowerSO-36 package. Its four complementary DMOS output stages support an operating supply range of 10 V to 36 V and combine CMOS-compatible logic inputs with integrated protection for undervoltage, short circuit, thermal warning, and thermal shutdown conditions. An audio power amplifier converts low-level input signals into a current and voltage swing capable of driving loudspeakers efficiently. Class-D topology switches the output stage at high frequency, reducing conduction losses compared with linear amplifiers. The STA50613TR provides four half-bridge outputs, allowing mono differential operation from two channels or stereo operation across four outputs when configured by the host system. The quad half-bridge arrangement is useful in compact consumer-audio and automotive-style subsystems where multiple powered speakers, soundbars, or multimedia enclosures share one power-amplifier device. Logic-level control reduces the need for external driver transistors. The 200 mOhm output-stage figure and 40 V maximum supply support headroom for common battery and automotive-derived power rails, while the package exposes a large thermal slug for heat removal. Protection features are essential in speaker systems where wiring faults, stalled voice coils, or sustained full-scale output can overload the amplifier. Thermal warning and shutdown provide escalating thermal management, and short-circuit protection limits damage during a speaker-line fault. Undervoltage protection prevents unintended output activity when the supply rail is too low for reliable operation. STA50613TR is supplied in tape-and-reel packaging with a temperature-grade suffix reserved for industrial temperature-range production. Designers should confirm the complete pin description, exposed-slug connection, output configuration, and recommended output-filter network in the manufacturer datasheet before layout release. This page combines the device electrical envelope, application guidance, package details, and practical integration notes to accelerate design review. It also identifies where the same-footprint qualification must be checked against a specific candidate rather than assumed from a shared package family.

RFQ Contact
STA50813TR - 40V 4.5A Class D Audio Amplifier | STMicroelectronics
STA50813TR

STA50813TR - 40V 4.5A Class D Audio Amplifier | STMicroelectronics

The STMicroelectronics STA50813TR is a 40 V, 4.5 A quad power half-bridge digital audio amplifier integrated in a 36-pin PowerSO-36 package. It can operate as a mono or stereo Class D output stage and can be reconfigured as a single bridge with double current capability. Its quad half-bridge architecture supports high-power audio systems requiring flexible channel configuration. A digital audio power amplifier is a power-management semiconductor that converts digital pulse information into high-current audio outputs. The half-bridge arrangement uses switches to apply the supply voltage alternately to each side of the speaker load. When two half-bridges drive one speaker, the device operates as a full bridge; multiple output stages can also be combined for stereo or multi-channel amplification. The STA50813TR supports a maximum supply voltage of 40 V and a maximum output current of 4.5 A. Its monolithic quad half-bridge stage uses STMicroelectronics Multipower BCD technology to combine analog control, digital drive, and power transistors in one package. The CONFIG pin can be connected to VDD to select single-bridge operation with doubled current capability. The device is intended for demanding powered-speaker systems where a compact external heat-spreading solution and efficient class-D conversion are important. A useful architectural distinction is that the STA50813TR is a digital-input power stage rather than a conventional analog-input audio amplifier. It therefore belongs near the final speaker-output stage of a digital audio signal chain, behind the audio processor, codec, DAC, or PWM controller that generates the required drive signals. This arrangement allows digital volume control and signal processing to occur upstream while the power stage handles speaker current efficiently. Typical uses include active loudspeakers, home-theater speaker systems, professional audio amplification, powered subwoofers, and compact multi-driver speakers. It is particularly appropriate when the system needs multiple Class D outputs, flexible bridge configuration, and operation from a supply up to 40 V. The exposed top pad also provides a direct path for heat removal from the power stage. Designers should carefully route the high-current switching outputs, provide stable input and bootstrap circuitry, connect the exposed thermal pad to an effective copper heat-spreading area, and keep sensitive control and audio signal traces away from output switching nodes. The CONFIG connection and all input-interface timing must be validated against the manufacturer’s recommended application circuit before production release. This product summary combines the identified device architecture, electrical ratings, package information, configuration options, and practical thermal and layout guidance. It also distinguishes verified drop-in replacements from related devices that merely share a broad product category, helping engineers evaluate replacement risk before modifying an existing amplifier design.

RFQ Contact
STA510A13TR - 44V 5.5A Quad Class D Audio Power Stage
STA510A13TR

STA510A13TR - 44V 5.5A Quad Class D Audio Power Stage

The STMicroelectronics STA510A13TR is a quad power half-bridge Class D audio amplifier stage with a 44 V maximum supply rating and 5.5 A output capability. It is designed for stereo, multi-channel, and configurable single-bridge audio systems, and is supplied in a 36-pin PowerSO package. The device uses multipower BCD technology and combines a CMOS-compatible control interface with complementary DMOS output stages. A Class D audio output stage converts a PWM carrier into a filtered audio waveform at the speaker load. Compared with a linear output stage, this architecture can provide high output-current capability and high conversion efficiency, while reducing heat and power loss when the load and switching design are appropriate. The STA510A family can operate as dual-bridge, reconfigured single-bridge, or binary half-bridge mode, depending on the CONFIG connection and operating configuration. Key features include a 44 V device rating, 5.5 A output current, a complementary DMOS output stage, and CMOS-compatible logic inputs. The device also includes thermal protection, thermal-warning output, undervoltage protection, and short-circuit protection. A minimum input and output pulse-width distortion of 150 mΩ is identified for the complementary output network, supporting compact Class D output-stage implementations with reduced conduction loss. The STA510A13TR is intended for powered speakers, home-theater receivers, active speakers, automotive audio systems, and consumer audio equipment. Its quad half-bridge organization allows four PWM input channels to drive two full bridges or other combinations of stereo, mono, and multi-channel configurations. The CONFIG pin provides additional flexibility when a designer needs to trade channel count against output-current capability. Designers should pay close attention to the datasheet power-supply recommendations, exposed-pad thermal path, output-filter requirements, input PWM timing, and protection behavior. The device is intended for Class D power stages rather than conventional analog voltage amplification. Keep the high-current output loop compact, provide adequate supply decoupling, and use the manufacturer reference layout to control switching noise and temperature rise. This product page organizes the key electrical characteristics, operating configurations, protection functions, and application considerations for the STA510A13TR. It also provides comparison guidance for compatible power-stage alternatives and highlights the engineering constraints that matter when designing a robust, thermally stable Class D audio output stage.

RFQ Contact
STA510F - 44V 5.5A Quad Half-Bridge Power Stage | STMicroelectronics
STA510F

STA510F - 44V 5.5A Quad Half-Bridge Power Stage | STMicroelectronics

The STMicroelectronics STA510F is a 44 V, 5.5 A monolithic quad half-bridge power stage implemented in multipower BCD technology and supplied in a PowerSSO-36 EPU package. Its four configurable half-bridges can operate as two full bridges, four independent half-bridges, or a single bridge with double current capability when CONFIG is connected to Vdd. The device is positioned as a Class D audio power amplifier IC for mono, stereo, and multichannel systems. A power half-bridge is a switching amplifier output stage that uses complementary high-side and low-side transistors to drive a load between two supply rails. The half-bridge belongs to the Class D power-amplifier hierarchy, combines with an input or control IC, and ultimately forms a linear audio or motor-power subsystem. Unlike a linear output stage, the switching architecture transfers more of the applied energy to the load and reduces output-stage dissipation. The STA510F's principal verified specifications are its 44 V maximum operating voltage, 5.5 A current capability, quad half-bridge organization, and multipower BCD process technology. The CONFIG pin provides an important topology option: tying it to Vdd reallocates the available output current to a single-bridge configuration with double current capability. Thermal warning, thermal protection, under-voltage protection, and CMOS-compatible logic inputs are also identified in the available manufacturer data. The complementary DMOS output stage is designed for compact, high-current audio amplification without requiring a large external output transistor network. Logic-compatible control reduces the interface burden between the amplifier stage and a host processor or audio controller, while integrated thermal and under-voltage protection address common fault conditions in high-power audio equipment. Typical uses include automotive head units, stereo and multichannel audio amplifiers, home-theater power stages, and compact industrial or professional audio systems. Designers should confirm exact channel mapping, thermal limits, output configuration, and PCB requirements against the manufacturer datasheet before laying out a power amplifier board. For a new design, provide the PowerSSO-36 exposed-pad land pattern, robust high-current and high-voltage routing, low-impedance supply decoupling, and a thermal path that carries worst-case conduction losses away from the package. Account for the amplifier mode selected by CONFIG rather than treating all four half-bridges as an unrestricted five-channel output. This page combines the verified manufacturer description, distributor identification, configuration options, protection functions, and engineering-oriented design guidance. Pricing shown in the structured offer is a placeholder because the retrieved distributor results did not expose a numeric price; current inventory and quotation must therefore be confirmed with authorized distributors.

RFQ Contact
STA510FTR - 44V 5.5A Class-D Power Stage | STMicroelectronics
STA510FTR

STA510FTR - 44V 5.5A Class-D Power Stage | STMicroelectronics

STMicroelectronics STA510FTR is a 44 V, 5.5 A quad power half-bridge Class-D audio power stage in a 36-pin PowerSSO package with an exposed pad. It supports a 10 V to 40 V supply range and can operate as a mono single-bridge stage, a stereo dual-bridge stage, or a four-channel half-bridge arrangement. The device uses multipower BCD technology and a complementary DMOS output stage. A power half-bridge is a switchable output section that uses two complementary transistor paths to drive a speaker load efficiently. Class-D power stages are audio amplifiers in which the output transistors operate primarily in switching states, reducing conduction loss compared with linear output stages. Within the amplifier hierarchy, the STA510FTR is a quad power half-bridge IC, an audio amplifier, a linear and switching power-management IC, and an integrated-circuit output driver. The principal device ratings are a 44 V maximum supply, a 5.5 A output-current rating, and a 10 V to 40 V operating supply range. The manufacturer identifies a single-bridge configuration in which the device can deliver 200 W into a 3 ohm load with 10% THD at 36 V. Its configuration flexibility allows two full bridges, one higher-current full bridge, or four half bridges to be implemented through appropriate output and CONFIG connections. The STA510F family combines a CMOS-compatible logic interface with a complementary DMOS output stage. According to the manufacturer product page, the input-pin thresholds are proportional to the VL pin voltage, which supports compatible source signaling. The configuration pin is tied to VDD for single-bridge operation with doubled current capability, while other wiring supports dual-bridge and binary half-bridge configurations. Typical uses include home-theater and multimedia speakers, powered subwoofers, compact consumer audio systems, automotive audio equipment, and industrial audio amplification. In a stereo implementation, the quad half-bridge arrangement can drive two speaker channels efficiently, while a mono bridge configuration concentrates the available output current into one higher-power channel. The exposed pad is central to thermal performance and requires careful PCB layout. Designers should verify the complete pinout, output-current limits, thermal limits, and switching behavior in the official manufacturer datasheet before applying the device. The power-supply decoupling network, exposed-pad copper, output inductor network, speaker wiring, and thermal management must be designed together because high-current switching stages can create both voltage transients and substantial heat dissipation. This product page consolidates verified manufacturer and distributor information, differentiates the supported bridge configurations, identifies where pinout and application details can be obtained, and explicitly separates verified electrical ratings from parameters that require confirmation. It also provides practical guidance for comparing the STA510FTR with other power-stage architectures without presenting unsupported substitutes as guaranteed drop-in replacements.

RFQ Contact
STA515W13TR - 40V 3A Quad Class-D Amp | STMicroelectronics
STA515W13TR

STA515W13TR - 40V 3A Quad Class-D Amp | STMicroelectronics

The STMicroelectronics STA515W13TR is a 40 V, 3 A quad power half-bridge digital audio amplifier built in Multipower BCD technology and packaged in a 36-lead PowerSSO-36 EPD configuration with an exposed pad. It provides four configurable Class-D output half-bridges for high-efficiency stereo and multichannel audio systems. The output stages use complementary DMOS devices with a specified 200 mΩ RDS(on), while the control inputs are CMOS-compatible. A Class-D audio power amplifier is a switching power stage that efficiently converts a digital or analog audio command signal into a full-bridge or half-bridge speaker output. In the power-management hierarchy, the STA515W13TR belongs to the amplifier IC family, supports digital audio amplification, and implements a multipower BCD semiconductor process combining control logic, bipolar circuitry, and DMOS output transistors. Its quad-half-bridge architecture allows one device to support stereo, multichannel, or independently configured output arrangements. The key electrical characteristics include a 40 V maximum supply rating, 3 A output capability, and a configurable 200 mΩ complementary DMOS output stage. The device can operate as a dual bridge or be reconfigured by connecting the CONFIG pin to VDD, creating a single bridge with double-current capability. This flexibility makes the part useful when a common amplifier board must serve several loudspeaker-impedance and channel-count requirements. Protection and diagnostic functions include thermal protection, a thermal warning output, undervoltage protection, and short-circuit protection. These functions support more robust behavior during startup, speaker-load transients, thermal stress, or wiring faults. The low input and output pulse-width distortion characteristics are important for preserving waveform fidelity, while the integrated protection circuitry reduces reliance on external discrete safeguards for common overload conditions. Typical uses include stereo all-digital high-efficiency amplifiers, powered speakers, soundbars, compact consumer audio systems, and multichannel home-audio equipment. The 3 A output-stage rating is particularly relevant to speaker drive where system impedance, supply voltage, thermal dissipation, and amplifier configuration determine actual continuous output capability. The exposed thermal pad supports heat transfer from the power output circuitry to the PCB copper area. Layout is the primary implementation constraint for this power amplifier. Keep the exposed pad and high-current output paths compact, provide adequate copper for thermal conduction, decouple the supply close to VDD and ground pins, and route speaker outputs as short and wide as practical. The CONFIG connection and logic interfaces require clean signal routing away from switching output nodes to reduce switching-edge coupling and unintended audio interference. This product overview consolidates the manufacturer’s device architecture, protection features, configuration options, and practical PCB considerations into an engineering-oriented selection guide. For a definitive replacement, engineers should verify the complete pin map, electrical limits, exposed-pad layout, thermal conditions, and speaker-load requirements in the manufacturer datasheet rather than relying only on headline ratings.

RFQ Contact
STA515WJ13TR - 40V 3A Quad Half-Bridge Class-D Audio Amp | ST
STA515WJ13TR

STA515WJ13TR - 40V 3A Quad Half-Bridge Class-D Audio Amp | ST

The STMicroelectronics STA515WJ13TR is a quad power half-bridge Class-D audio amplifier IC rated for a 40 V supply and 3 A output current, integrating four amplifier channels into a single 36-lead PowerSSO-36 EPD surface-mount package. It is the multi-channel building block for compact hi-fi, home cinema and active-speaker designs that need several amplifier channels on one board. A power half-bridge is a switching power stage that drives a speaker load between one supply rail and ground, or in bridged (BTL) configuration between the two outputs of two half-bridges. A Class-D audio amplifier is a power amplifier whose output transistors operate in saturation rather than in their linear region, which converts the audio signal into a high-frequency pulse-width-modulated waveform and back into a smooth analog voltage through an output LC filter. The hierarchy runs Class-D audio amplifier to power half-bridge to amplifier IC to integrated circuit, and the STA515WJ13TR sits at the multi-channel end of that chain where four such stages are consolidated on one die. Key characteristics include four independent half-bridge outputs, a maximum supply voltage of 40 V, a maximum output current rating of 3 A, an open-drain THWARN thermal-warning output that asserts low once the IC temperature exceeds 130 degrees Celsius ahead of thermal shutdown, and an open-drain FAULT output that reports internal fault conditions. On a detected fault the internal fault signal immediately disables the output power MOSFETs and places both H-bridges in a high-impedance state, protecting the loudspeakers and the external power stage from sustained DC. Because four channels share one package, the thermal design of the board dominates the layout effort. Dissipated heat must leave through the exposed pad, so the pad needs a full copper pour with dense thermal vias, and the supply decoupling network must serve four output stages drawing from the same 40 V rail. Output filters are not integrated, so each channel requires its own LC filter sized to the switching frequency and the speaker impedance. Typical applications include multi-way hi-fi and home cinema speaker crossovers, active subwoofer amplifiers, Bluetooth and wireless speaker systems, soundbar front-ends, and compact automotive or industrial audio modules where a single IC replaces four separate bridge amplifiers and saves board area, heat-sink surface and system cost. When designing around this device, treat the exposed pad and via array as the primary thermal path, keep the input and supply routing compact, and verify that each LC output filter is rated for the full 3 A peak current and for the minimum speaker impedance you intend to drive. Confirm the FAULT and THWARN pins are monitored by the host controller so thermal derating is handled before shutdown occurs. This page consolidates distributor availability, drop-in alternatives, a parameter-by-parameter comparison and practical thermal and layout guidance for the STA515WJ13TR into a single engineering reference that is not duplicated on the manufacturer datasheet alone.

RFQ Contact
STA516B13TR - 65V 7.5A Quad Half-Bridge Amplifier | ST
STA516B13TR

STA516B13TR - 65V 7.5A Quad Half-Bridge Amplifier | ST

The STMicroelectronics STA516B13TR is a 65 V, 7.5 A quad power half-bridge Class D amplifier built on Multipower BCD technology and housed in a 36-pin PowerSO-36 slug-up package. It can deliver up to 220 W per channel as stereo into 3 Ω to 8 Ω speakers from a 50 V supply, while alternative configuration supports mono, stereo, or four single-ended outputs. A power half-bridge is an audio-amplifier topology that switches current between two supply rails through two MOSFET half-bridges. Multiple half-bridges can be paired to form bridge-tied-load, or BTL, outputs. This Class D approach belongs to the power-amplifier hierarchy and uses efficient switching to reduce the amount of power dissipated in the output stage compared with a conventional linear amplifier. The STA516B family combines four half-bridge outputs with flexible configuration. According to the manufacturer datasheet, connecting CONFIG to VDD can double the available current in a single-bridge arrangement. The device can also operate as four independent single-ended channels. This configurability allows one amplifier platform to address conventional stereo, high-power mono, and multi-channel speaker systems without changing the power-stage footprint. The architecture supports audio systems operating from a 10 V to 58 V supply, with the device rated to 65 V. It can provide 400 W output power in a single-channel configuration and up to 220 W per channel in a stereo configuration. The PowerSO-36 slug-up package provides a substantial thermal pad intended for heat transfer through a PCB copper area or thermal interface to a heat spreader. Typical applications include professional audio amplifiers, powered speakers, public-address systems, cinema and home-theater equipment, subwoofer amplifiers, and high-power multichannel audio. The flexible half-bridge arrangement is especially useful when one board design must support several speaker impedances or output configurations. Layout is critical because a high-current Class D amplifier can switch tens of amperes. Keep power-loop paths compact, connect output returns to the exposed thermal pad according to the reference layout, and provide low-inductance supply decoupling. Avoid routing sensitive input signals through high-current switching areas. This page organizes the manufacturer's electrical information, configuration options, sourcing details, comparison data, and practical design guidance into one engineering-focused reference for evaluating the STA516B13TR in new and existing Class D audio platforms.

RFQ Contact
STA516BETR - 250W Class D Power Stage | STMicroelectronics
STA516BETR

STA516BETR - 250W Class D Power Stage | STMicroelectronics

The STMicroelectronics STA516BETR is a Class D digital audio power stage capable of delivering 250 W per channel, with operation from 10 V to 60 V in a PowerSO-36 surface-mount package. The device is designed for high-power audio systems using either mono or stereo output configurations and has a stated output-current capability of 7.5 A. Its low 200 mOhm output resistance supports efficient bridge operation when paired with suitable external switching and filtering networks. A digital audio power amplifier is a semiconductor device that converts high-speed digital or analog control signals into a switching power stage that drives loudspeaker loads. Within the broader hierarchy, the STA516BETR belongs to the Class D amplifier, audio power amplifier, power-management semiconductor, and integrated-circuit categories. Its primary function is efficient audio power conversion rather than low-level signal amplification, making it appropriate for professional audio, home cinema, and high-power distributed-speaker systems. Key characteristics include Class D operation, support for 10 V to 60 V supply voltages, a stated 250 W output-power rating, 7.5 A output current, and a 200 mOhm output resistance. Manufacturer-related listings identify the package as PowerSO-36 with an exposed thermal pad, while distribution records identify a tape-and-reel packing format with a standard quantity of 600 units. The large exposed pad provides the primary path for heat removal during high-power operation. The STA516BETR is a power-conversion stage rather than a complete audio system controller. In a typical design, an audio codec or digital audio processor produces the required control signals, and the STA516BETR supplies the high-current switching output. External inductors, capacitors, MOSFETs, gate drivers, and passive networks may be required according to the selected modulation and filtering topology. Its high voltage and current capability makes thermal design and output-network implementation the central engineering considerations. Typical applications include professional powered speakers, cinema amplifiers, subwoofer amplifiers, high-powered home-theater systems, and industrial audio equipment. Mono operation can concentrate available power into one channel, while stereo operation can drive two speaker channels. The stated 480 W into 3 ohms in mono configurations highlights the device's suitability for demanding low-impedance speaker loads when the complete amplifier topology, magnetic components, PCB copper, and cooling system are designed accordingly. Thermal management is essential because Class D power stages can dissipate substantial heat during high-output operation. The PowerSO-36 exposed pad should be connected to a substantial thermal copper area and, where required, an external heat sink. The power rating cannot be treated independently of load impedance, switching frequency, board construction, ambient temperature, and heat-sink performance. This page organizes the core electrical ratings, package data, sourcing guidance, application fit, and engineering trade-offs for the STA516BETR. It also distinguishes device-level ratings from complete amplifier performance, helping engineers plan the power stage, thermal structure, output network, and procurement strategy as one integrated design.

RFQ Contact
STA516BFTR - 480W Class-D Audio Amplifier | STMicroelectronics
STA516BFTR

STA516BFTR - 480W Class-D Audio Amplifier | STMicroelectronics

The STMicroelectronics STA516BFTR is a 480 W mono or stereo Class-D audio power amplifier IC packaged in a PowerSO-36 EPU package. It accepts up to 60 V, combines a quad power half-bridge output stage with integrated audio amplification, and supports high-power consumer audio systems where a compact, thermally robust power stage is required. The EPU package is designed for efficient heat transfer through its exposed power pad and large PCB copper area. A Class-D audio amplifier is a switching power amplifier whose output transistors operate at or near saturation. Compared with a linear audio amplifier, this topology can provide higher conversion efficiency and lower heat dissipation because less power is dissipated in the output devices. The STA516B family combines that switching-output approach with integrated control and gate-drive functions, simplifying high-power audio amplifier design while preserving direct control over speakers and reactive loads. The device is identified as a one-channel mono or two-channel stereo audio amplifier solution rated for 480 W output. Its 60 V class voltage capability provides headroom for higher bus voltages commonly considered in high-performance audio, while the 6 A quad power half-bridge architecture supports robust low-frequency output. A differential input arrangement enables direct connection to many audio signal chains without a separate predriver stage. The PowerSO-36 EPU mechanical format concentrates heat transfer through the exposed pad, making PCB thermal design essential. Input, output, supply, and power-ground connections must be routed carefully to preserve signal integrity and current handling. The large output-current path should use wide copper planes, multiple vias, and a thermal design that controls junction temperature under sustained full-power operation. Typical applications include professional audio power amplifiers, high-performance home-theater and multi-channel amplifiers, subwoofer amplifiers, automotive-audio systems, and powered speakers. The STA516BFTR is especially relevant when high output power, a high-voltage Class-D output stage, and a thermally exposed surface-mount package are required within a compact amplifier design. Use the manufacturer pin configuration and reference-layout guidance when assigning tracks. Decoupling capacitors should be placed directly beside the supply pins, the exposed thermal pad must connect to the required copper area, and output wiring should be kept short and separated from sensitive input paths. Thermal performance should be evaluated at the intended load, speaker impedance, supply voltage, and enclosure temperature. This product page combines the verified device identity and package information with practical thermal, layout, sourcing, and application guidance. It also distinguishes pin-compatible same-family options from substitutions that require engineering review, helping designers shorten evaluation time while protecting amplifier performance and reliability.

RFQ Contact
STA51813TR - 40V 3.5A Quad Half-Bridge | STMicroelectronics
STA51813TR

STA51813TR - 40V 3.5A Quad Half-Bridge | STMicroelectronics

STMicroelectronics STA51813TR is a 40 V, 3.5 A quad power half-bridge digital audio amplifier output stage built with Multipower BCD technology. The monolithic device provides four half-bridge channels in a PowerSSO-36 exposed-pad package and can deliver up to 24 W per channel at THD = 10% in the intended all-digital high-efficiency amplifier configuration. Its CONFIG pin can connect to VDD to reconfigure the quad half-bridge arrangement into a single bridge with double current capability. A quad half-bridge is a power-conversion output topology commonly used in Class D audio systems. Each half-bridge switches a supply rail with controlled PWM signals, while an output filter reconstructs the amplified audio waveform. The STA51813TR is positioned as the final power stage of a stereo all-digital high-efficiency amplifier, where its multiple half-bridges support efficient power delivery and flexible channel configuration. Key electrical characteristics include a 40 V maximum supply rating, 3.5 A power-stage current capability, and a complementary DMOS output stage with 200 mΩ RDS(on) as stated in the device description. The part includes thermal protection, thermal warning output, undervoltage protection, and short-circuit protection. These protections address common output-stage failure conditions involving excessive temperature, supply undervoltage, and overload or short circuits. The STA51813TR uses Multipower BCD technology, combining analog power-processing functions with control logic in a monolithic structure. The device can operate as four single-ended channels, as two full bridges, or as a single bridge when CONFIG is tied to VDD. This flexibility makes it relevant to multi-channel audio systems, compact Class D power stages, and designs requiring different output configurations from the same package. Typical applications include stereo all-digital high-efficiency amplifiers, multi-channel home-audio systems, powered speakers, soundbars, and other consumer audio products. The exposed thermal slug in the PowerSSO-36 package provides a direct thermal path from the IC to the PCB or heatsink, making thermal layout and copper-area management essential to reliable operation. For PCB design, place the input, PWM, supply, ground, and output connections according to the manufacturer pin description table, and provide adequate low-impedance power and ground paths. Use the exposed pad as both a thermal path and, where the package construction requires it, a low-impedance electrical connection. Check the worst-case output power, thermal dissipation, and switching-node layout against the manufacturer application guidance. This page organizes the electrical ratings, configuration options, protections, packaging details, and drop-in replacement guidance for engineers evaluating STA51813TR. It also highlights practical thermal and layout considerations that are essential when moving from a datasheet schematic to a working Class D audio power stage.

RFQ Contact