Products (44,000+)

MAX232ECPWRG4 - Dual RS-232 Transceiver | Texas Instruments
MAX232ECPWRG4

MAX232ECPWRG4 - Dual RS-232 Transceiver | Texas Instruments

Texas Instruments MAX232ECPWRG4 is a dual RS-232 line-driver and receiver IC with IEC 61000-4-2 electrostatic-discharge protection. The device provides two transmit channels and two receive channels, operates from a single 5 V power supply, supports data rates up to 120 kbit/s, and accepts receiver input levels of ±30 V. It is packaged in a 16-pin TSSOP measuring 4.40 mm in body width. An RS-232 transceiver is an interface IC that bridges a digital logic system and a serial port using the voltage levels defined by the RS-232 standard. The MAX232 belongs to the hierarchy of interface ICs, serial interface transceivers, line drivers and receivers, and semiconductor components. It is useful when a controller, test instrument, industrial controller, or other digital system must communicate with an RS-232 port through a compact, low-power interface. The MAX232ECPWRG4 includes two RS-232 drivers and two receivers in one package. According to the manufacturer datasheet, it operates from one 5 V supply, uses 1.0 µF charge-pump capacitors, and operates to 120 kbit/s. These characteristics make it suitable for legacy serial-port equipment, control systems, instrumentation, and point-of-sale equipment where RS-232 compatibility is required. Its internal charge-pump circuitry generates the bipolar voltage levels required to drive RS-232 signals from a single low-voltage supply. The transmitter and receiver sections provide level translation in both directions, allowing a UART-compatible logic side to connect to a ±30 V-capable RS-232 side. The specified operating speed supports conventional serial links without requiring a high-speed differential interface. The device also includes IEC 61000-4-2 ESD protection, a distinguishing feature for systems in which a connected cable can expose the interface to electrostatic discharge. Appropriate external protection, grounding, routing, and enclosure design remain necessary because the IC alone does not eliminate every system-level ESD hazard. Shielded or twisted-pair cable practices should be considered for longer or electrically noisy interconnects. Because the MAX232ECPWRG4 is obsolete and no longer manufactured, engineers should plan a lifecycle review before starting a new production design. Existing equipment can use the part for repair or controlled redesign work, but new designs should compare active alternatives carefully for package, pinout, logic levels, charge-pump capacitance, data rate, and supply requirements. A candidate should not be treated as drop-in solely because it is described as a MAX232-family device. This product page summarizes the device function, documented operating characteristics, package, lifecycle status, sourcing route, and engineering considerations. It also separates the obsolete target from similarly named MAX232 variants whose packages or protection options differ, helping buyers assess replacements without assuming that a different suffix is a direct substitute.

RFQ Contact
MAX232ECSE+ - 2/2 RS-232 Transceiver, 15kV ESD | Analog Devices
MAX232ECSE+

MAX232ECSE+ - 2/2 RS-232 Transceiver, 15kV ESD | Analog Devices

The Analog Devices MAX232ECSE+ is a dual RS-232 line transceiver that combines two drivers and two receivers in a 16-pin SOIC package. It operates from a single +5 V supply, supports data rates up to 120 kbps, and integrates a charge pump for the RS-232 bipolar voltage levels required by V.28 communications. The MAX232ECSE+ also provides high ±15 kV human-body-model ESD protection on its interface pins. It is designed for industrial-control equipment, data acquisition systems, service interfaces, and other equipment that must translate between RS-232 and TTL/CMOS logic levels. The MAX232ECSE+ is a 16-SOIC surface-mount device offered in an extended-temperature option, making it suitable for applications where commercial-temperature transceivers are not appropriate. Its integrated charge pump eliminates the external ±10 V supply normally required by RS-232 equipment, while the on-chip level translation removes the need for external RS-232 line drivers and receivers. Electrical characteristics including propagation delay, receiver threshold, driver output levels, supply current, and temperature limits should be confirmed against the manufacturer datasheet before release to production. For a new design that requires an additional RS-232 channel, the MAX3232E family provides four drivers and four receivers while retaining a comparable 16-pin SOIC footprint. Conversely, the MAX232ECSE+ is the simpler choice for point-to-point links that need only one full-duplex RS-232 port. Its defined driver and receiver count also makes the pin assignment straightforward, although unused receiver inputs must be properly biased rather than left floating. This page also organizes drop-in alternatives, application-specific guidance, package and brand comparisons, and practical PCB design notes for engineers evaluating the MAX232ECSE+ in industrial serial-port designs.

RFQ Contact
MAX232ECSE+T - 120kbps 5V RS-232 Transceiver | Analog Devices
MAX232ECSE+T

MAX232ECSE+T - 120kbps 5V RS-232 Transceiver | Analog Devices

The Analog Devices MAX232ECSE+T is a dual-driver, dual-receiver RS-232 transceiver operating from a single 5V supply at data rates up to 120kbps, with ±15kV ESD protection and a 16-pin narrow SOIC package. It integrates the charge-pump circuitry required to generate RS-232-compatible bipolar levels from one low-voltage supply. The device provides two transmit channels and two receive channels, making it suitable for compact point-to-point serial interfaces. An RS-232 transceiver is an interface IC that converts logic-level signals between a host controller and a RS-232 port. Within the electronics hierarchy, it belongs to interface ICs, where its role is to bridge a low-voltage digital system and a differential, bipolar communications bus. Unlike a direct TTL or CMOS serial connection, the MAX232ECSE+T adds level translation and electrical protection at the connector-facing side of a design. The principal features include dual RS-232 drivers, dual receivers, operation from a single 5V supply, and a maximum signaling rate of 120kbps. The integrated charge pump supplies the positive and negative voltage levels expected by RS-232 receivers. According to the Analog Devices MAX232 datasheet, Rev. 18, the device is designed to meet EIA/TIA-232E and CCITT V.28 interface requirements when operated under the specified loading conditions. The MAX232ECSE+T also incorporates ±15kV human-body-model ESD protection on its interface pins. This protection improves tolerance to electrostatic discharge encountered during connector installation, servicing, or nearby industrial activity. It does not replace a complete surge-protection strategy, but it provides a useful first line of defense around a serial interface. The device uses a 16-SOIC surface-mount package intended for compact industrial, instrumentation, and embedded-control assemblies. Typical uses include RS-232 adapters for embedded systems, programming and service ports for industrial equipment, point-to-point links between microcontrollers and peripheral boards, control interfaces for laboratory instruments, and communication ports in building-control equipment. A second transmitter and receiver can support a single-ended two-way RS-232 link when the application requires one path in each direction. When laying out the circuit, place the charge-pump capacitors close to their designated pins and route the connector-side driver and receiver nets away from sensitive analog or high-speed digital traces. Verify the host-side logic levels, cable length, grounding strategy, and external protection before enabling the interface. Avoid assuming that the integrated ESD rating permits unprotected exposure to severe industrial surge events. This page combines the manufacturer's interface specifications, practical PCB guidance, package-level replacement analysis, and application-focused comparisons to support faster component selection. It also distinguishes electrical, protection, and packaging trade-offs that are not obvious from the RS-232 transceiver category label alone.

RFQ Contact
MAX232ECWE+ - 120kbps RS-232 Transceiver | Maxim
MAX232ECWE+

MAX232ECWE+ - 120kbps RS-232 Transceiver | Maxim

The Maxim Integrated MAX232ECWE+ is a dual RS-232 transceiver with two drivers and two receivers, a 120 kbps data rate, ±15 kV ESD protection, and a single 4.5 V to 5.5 V supply requirement. It is packaged in a 16-pin SOIC and uses an integrated charge pump to generate RS-232 bipolar voltage levels from a 5 V supply. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts received RS-232 signals back into CMOS or TTL-compatible logic. The MAX232 belongs to the RS-232 transceiver hierarchy, which includes multi-channel transceivers and line-driver and receiver ICs used to connect older serial equipment to modern digital systems. The device provides two transmit channels and two receive channels in a single package, allowing one RS-232 port to support two directions of data transfer. Its 120 kbps maximum data rate suits conventional asynchronous serial links, while the integrated charge pump removes the need for external ±12 V power. The ±15 kV ESD protection helps improve robustness on cables and connector interfaces exposed to electrostatic discharge. Operation from a 4.5 V to 5.5 V supply allows use with conventional 5 V digital systems. The transmitter converts CMOS/TTL inputs into RS-232-compatible output levels, while the receivers use threshold and hysteresis to interpret bipolar RS-232 inputs as logic signals. The MAX232E family is specifically designed for RS-232 and V.28 communications, including industrial and instrumentation environments where signal conditioning and interface protection are important. Typical applications include service-port interfaces, industrial control systems, test and measurement equipment, POS terminals, and embedded systems that need to communicate with legacy RS-232 peripherals. Two driver and two receiver channels also permit two complete RS-232 links when each link requires one transmit and one receive direction. PCB design should preserve the manufacturer's recommended charge-pump capacitor network and place the associated capacitors close to their designated pins. Keep the interface connector and unprotected logic-side traces separated as far as practical, and route any externally accessible cable shield or ground connection according to the enclosure and system grounding architecture. This page combines package, interface, purchasing, and replacement information with practical guidance for implementing a robust 5 V RS-232 link. It also identifies genuine pin-compatible options and highlights the temperature-range, lifecycle, and protection considerations that determine whether an alternative can serve as a true drop-in replacement.

RFQ Contact
MAX232ECWE+T - 5V RS-232 Transceiver, 120kbps | Analog Devices
MAX232ECWE+T

MAX232ECWE+T - 5V RS-232 Transceiver, 120kbps | Analog Devices

The Analog Devices MAX232ECWE+T is a dual RS-232 transceiver with two drivers and two receivers, 120kbps data-rate capability, ±15kV ESD protection, and a 16-pin SOIC package. It operates from a single +5V supply and integrates charge-pump circuitry to generate the positive and negative voltages required by RS-232 line drivers. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 differential voltage levels and converts incoming RS-232 signals back into logic-compatible levels. It belongs to the interface IC hierarchy, where transceivers connect modern digital systems to older, noise-tolerant serial ports. The MAX232ECWE+T is intended for EIA/TIA-232E and CCITT V.28 communication links operating from a single 5V rail. The integrated charge pump eliminates the need for a separate negative supply, allowing the MAX232ECWE+T to operate from 4.5V to 5.5V. Its two transmit channels provide full-duplex serial communication, while two receive channels support simultaneous bidirectional data exchange. The ±15kV human-body-model ESD protection improves tolerance when users, cables, or external equipment connect to the communication port. As a CMOS interface device, the MAX232ECWE+T combines low-power 5V operation with level translation between TTL-compatible circuitry and RS-232. Internal transmitter and receiver functions implement the voltage conversion required at the physical interface, while the charge-pump section supports the bipolar signal levels used by compliant RS-232 equipment. The 16-pin SOIC package supports conventional surface-mount assembly and standard board-level inspection. Typical uses include industrial equipment serial ports, laboratory instrumentation, point-of-sale terminals, embedded control systems, and service-console connections. The device is especially useful where the host electronics have a 5V supply and the connected peripheral expects a physical RS-232 port rather than USB or a low-voltage differential interface. Cable protection and grounding remain important when connecting the transceiver to long or electrically noisy external cables. For a new design, place the required charge-pump capacitors close to their associated pins and route each driver output directly toward its connector. Keep logic-side traces away from RS-232 line outputs, provide a solid ground return, and select external protection appropriate to the cable environment. Review the device's operating-temperature grade and absolute-maximum limits before using it outside a commercial-temperature enclosure. This page combines the verified MAX232ECWE+T interface specifications, same-package cross-reference options, application guidance, and a parameter comparison that helps engineers distinguish electrical, package, and grade differences before approving a substitution.

RFQ Contact
MAX232ECWE+TG104 - Dual RS-232 IC | Analog Devices
MAX232ECWE+TG104

MAX232ECWE+TG104 - Dual RS-232 IC | Analog Devices

Analog Devices MAX232ECWE+TG104 is a dual RS-232 transceiver IC with one transmitter and one receiver, operated from a single 4.5 V to 5.5 V supply in a 16-pin SOIC package. The device provides integrated charge-pump circuitry, eliminating the need for a bipolar positive and negative supply, and includes integrated protection rated at ±15 kV HBM ESD. An RS-232 transceiver is an interface integrated circuit that converts logic-level signals into RS-232-compatible levels and converts received RS-232 signals back into logic levels. It belongs to the line-driver and line-receiver hierarchy within interface ICs. This device is intended for bidirectional serial communication over cables or other RS-232 links where the host supplies a single positive supply voltage. The principal features of the MAX232ECWE+TG104 are its dual 2/2 transceiver arrangement, 4.5 V to 5.5 V supply range, integrated charge-pump capability, and integrated ±15 kV human-body-model ESD protection. The 16-pin gull-wing SOIC package supports conventional surface-mount assembly and provides enough pins for the receiver, transmitter, supply, ground, and externally connected charge-pump capacitors. The MAX232 family uses CMOS-compatible logic on the digital interface side while the integrated charge-pump circuitry creates the bipolar voltage levels required by RS-232. This arrangement simplifies system power design because the circuit does not require separate positive and negative supplies. ESD protection integrated into the interface can improve resistance to electrostatic discharge encountered during handling or connection of external cabling. Typical uses include industrial control equipment, data-acquisition systems, serial adapters, service-console interfaces, and legacy peripheral connections. In each case, the transmitter converts outgoing logic signals into RS-232 levels, while the receiver translates incoming levels into logic signals understood by the host controller. The commercial temperature grade identifies this ordering code as intended for normal commercial operating conditions. Designers should place the required external capacitors close to the charge-pump pins and route the RS-232 interface traces away from sensitive digital signals. Ground-return continuity and compliant cable practices remain important because integrated ESD protection does not eliminate the need for good enclosure and grounding practices. Confirm the complete pin assignment, absolute maximum ratings, and capacitor values against the manufacturer datasheet before layout release. This product page combines the device identification, verified technical characteristics, sourcing guidance, and application-focused design information. It also identifies genuinely comparable package and ordering variants while making clear where a complete pin-level alternative cannot be established without additional manufacturer cross-reference information.

RFQ Contact
MAX232EESE+ - 120kbps RS-232 Transceiver | Analog Devices
MAX232EESE+

MAX232EESE+ - 120kbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX232EESE+ is a dual RS-232 line-driver and receiver transceiver operating from a single +5 V supply, with integrated charge-pump circuitry and 15 kV ESD protection. It supports data rates up to 120 kbps and is packaged in a 16-pin narrow SOIC for surface-mount industrial equipment, data acquisition systems, and RS-232 communication ports. An RS-232 transceiver is an interface IC that converts logic-level signals into bipolar RS-232 levels and converts incoming RS-232 signals back into logic levels. Within the interface hierarchy, MAX232EESE+ belongs to the RS-232 transceiver family of communication interface ICs. It is intended for EIA/TIA-232E and CCITT V.28 links where the endpoint equipment supplies low-voltage logic while the cable interface requires approximately positive and negative voltage signaling. The MAX232EESE+ provides two transmit channels and two receive channels in one package. Its integrated voltage-generation circuitry lets the device operate from one +5 V rail without a separate negative supply. The manufacturer states that the MAX232E family meets EIA/TIA-232E and CCITT V.28 specifications at data rates up to 120 kbps when loaded. The MAX232E suffix also identifies the 15 kV ESD-protected version listed for the product. The 16-pin narrow SOIC package supports compact, surface-mounted implementations and automated assembly. Because RS-232 is a single-ended, unbalanced interface, the transceiver simplifies the physical layer but does not provide galvanic isolation, common-mode rejection comparable to differential buses, or long-distance protection beyond the specifications of the MAX232E family. Circuit design should account for connector protection, cable transients, ground continuity, and unused driver or receiver inputs. Typical uses include serial adapters, test and measurement instruments, programmable logic controllers, industrial control panels, and embedded equipment that previously relied on a legacy RS-232 port. A microcontroller can connect to the logic-side inputs and outputs, while the line-side pins connect through the DB9 or other RS-232 connector. When laying out a design, place the device close to the connector and place its required charge-pump capacitors on the shortest practical signal paths. Keep the RS-232 traces away from clocks, switching regulators, and sensitive analog inputs. External protection may still be needed for severe industrial environments even though the device includes 15 kV ESD protection. This page combines the manufacturer's MAX232E family information with interface-focused engineering guidance, package details, purchasing questions, and a practical evaluation of replacement options. It helps engineers determine whether the MAX232EESE+ fits an existing 16-pin SOIC RS-232 design before requesting a quote.

RFQ Contact
MAX232EESE+T - 120kbps ESD RS-232 Transceiver | Analog Devices
MAX232EESE+T

MAX232EESE+T - 120kbps ESD RS-232 Transceiver | Analog Devices

Analog Devices MAX232EESE+T is a +5 V RS-232 line-driver and receiver transceiver with two drivers, two receivers, full-duplex operation, data rates up to 120 kbps, and ±15 kV ESD protection in a 16-pin SOIC package. It uses an integrated charge pump to generate the bipolar voltage levels required by RS-232 from a single 5 V supply. An RS-232 transceiver is an interface IC that converts between digital logic signals and the voltage-defined, unbalanced signaling used by RS-232 equipment. The MAX232E belongs to the line-driver and receiver hierarchy, combines two signal channels in one package, and is designed for EIA/TIA-232E and CCITT V.28 communication links where ±12 V is unavailable. Key features include two transmit channels, two receive channels, full-duplex RS-232 operation, and operation at data rates up to 120 kbps. The integrated charge pump eliminates the need for an external ±12 V supply, while ±15 kV human-body-model ESD protection improves robustness on connectors and cables that may be exposed to electrostatic discharge. The E-suffix device is supplied in a 16-pin SOIC package for surface-mount assembly. Internally, the transmit drivers use the charge-pump-generated rails to produce RS-232-compatible output levels from TTL or CMOS-compatible inputs. The receive channels detect RS-232 logic levels and translate them into logic-compatible signals for the host or controller. Because the device supports both directions in one package, it is suitable for point-to-point links requiring simultaneous transmission and reception, subject to the signaling and grounding requirements of the connected equipment. Typical applications include industrial serial ports, data-acquisition equipment, instrumentation, barcode and identification systems, and embedded control systems using legacy RS-232 equipment. The device is particularly useful where a modern controller must communicate with an RS-232 printer, test instrument, modem, or service interface while retaining protection at the externally accessible connector. Designers should follow the manufacturer’s recommended charge-pump capacitor and logic-side bypass-capacitor recommendations. Keep the protected connector-side traces away from sensitive logic, provide a low-impedance ground path between communicating systems, and verify that the selected transceiver, wiring, and enclosure address the required ESD and isolation strategy for the installation. This page combines the MAX232EESE+T interface specifications, package and lifecycle information, qualified drop-in alternatives, and practical RS-232 design guidance. It also distinguishes exact drop-in choices from functional alternatives so engineers can assess footprint, speed, protection, and qualification before approving a replacement.

RFQ Contact
MAX232EEWE+ 120kbps RS-232 Transceiver | Analog Devices
MAX232EEWE+

MAX232EEWE+ 120kbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX232EEWE+ is a dual driver and dual receiver RS-232 transceiver designed for +5 V operation, with one transmitter and one receiver channel. It supports data rates up to 120 kbps and is packaged in a 16-pin wide SOIC. The MAX232EEWE+ also includes an on-chip charge-pump voltage generator for converting the single +5 V supply into the bipolar voltage levels required by RS-232 drivers. An RS-232 transceiver is an interface IC that connects logic-level equipment to a serial port using the EIA/TIA-232E electrical standard. Each receiver translates a bipolar RS-232 signal into a TTL or CMOS logic level, while each driver converts a logic-level signal into the bipolar voltage required at the RS-232 port. This interface belongs to the broader hierarchy of transceiver IC, interface IC, and communication semiconductor. The MAX232EEWE+ meets EIA/TIA-232E and CCITT V.28 specifications according to the Analog Devices product page. Its two-driver, two-receiver arrangement supports equipment with two serial channels while keeping the external interface compact. Operation from a single +5 V supply simplifies system design because the charge pump generates the required positive and negative transmitter voltages internally. The wide SOIC package is also available in a 16-pin surface-mount form. At the circuit level, the device combines two RS-232 drivers, two RS-232 receivers, and a charge-pump voltage converter. The charge-pump section requires external storage capacitors, allowing the transmitter section to generate the positive and negative rail voltages needed for compliant RS-232 output levels. Receiver inputs accept bipolar RS-232 signals and produce digital logic outputs suitable for the host controller or peripheral. Typical uses include industrial serial adapters, data-acquisition equipment, instrument-control panels, embedded serial ports, and communication links between a logic board and a legacy RS-232 peripheral. The 120 kbps operating capability supports moderate-speed point-to-point links, while the dual-channel organization can serve two ports or provide transmit and receive paths for more than one interface. PCB layout is critical because charge-pump capacitors must be connected close to their designated pins, and RS-232 driver outputs should be routed away from sensitive receiver and logic traces. Protection networks may be added at exposed connectors, but they must not distort signal timing or prevent the driver from meeting its specified output levels. This page combines the device architecture, verified operating specifications, package details, application guidance, and form-fit-function alternatives to support faster design review and sourcing. It also distinguishes true pin-compatible alternatives from functional equivalents that require circuit or package changes.

RFQ Contact
MAX232EEWE+T - 120kbps RS-232 Transceiver | Analog Devices
MAX232EEWE+T

MAX232EEWE+T - 120kbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX232EEWE+T is a dual-driver, dual-receiver RS-232 transceiver operating from a single 5V supply, with data rates up to 120kbps and ±15kV HBM ESD protection. The device is housed in a 16-pin wide SOIC package and is supplied in tape-and-reel packaging. Its integrated charge-pump circuitry produces the bipolar voltage levels required by RS-232 interfaces from one 5V supply, reducing the external component count compared with discrete driver designs. An RS-232 transceiver is a bidirectional interface IC that converts between single-ended logic-level signals and the bipolar signaling used by RS-232 equipment. Within the interface hierarchy, the MAX232E belongs to the RS-232 transceiver family, which is part of transceiver ICs, interface ICs, and broader semiconductor components. Two driver channels convert outgoing logic signals, while two receiver channels convert incoming RS-232 signals into CMOS-compatible levels. This makes the device suitable for equipment with two serial ports or for a single port requiring bidirectional communication. The MAX232E family provides two transmitters and two receivers, supports operation at up to 120kbps, and meets EIA/TIA-232E and CCITT V.28 interface specifications according to the Analog Devices product page. Its integrated charge-pump circuitry permits single-supply operation, while ±15kV human-body-model ESD protection helps improve robustness at connector-facing pins. The wide 16-SOIC package is also available in common industrial assembly and inspection workflows. Each channel uses the electrical behavior expected of a standard MAX232-family RS-232 interface. The charge pump develops the positive and negative voltages needed by the drivers, allowing the receiver side to recognize valid RS-232 levels while rejecting signals outside the specified transition region. Four active channels in one package reduce board area compared with separate single-channel transceiver packages. The device therefore balances functional integration, standard interface compatibility, and a widely supported package format. Typical uses include industrial serial adapters, instrumentation links, point-of-sale equipment, data-acquisition systems, and control panels that connect a TTL or CMOS controller to an RS-232 port. It can also support legacy equipment migrations where the host interface still uses RS-232 and the new controller requires logic-level serial signaling. The 120kbps maximum data rate accommodates many legacy peripheral and instrumentation protocols without requiring a higher-bandwidth physical-layer transceiver. Designers should preserve the charge-pump capacitor arrangement and place the required capacitors close to the appropriate device pins. RS-232 cable transients and ESD events occur at the connector, so the ground reference, cable routing, and interface protection arrangement also matter. Confirm the logic polarity, receiver threshold behavior, and shutdown state before substituting this device into a design with mixed RS-232 families. This product page combines the manufacturer interface specifications, package details, verified cross-reference context, selection guidance, and practical application notes to support a faster engineering decision. It also highlights where same-package alternatives can be evaluated without changing the PCB footprint.

RFQ Contact
MAX232EID - 120kbps RS-232 Transceiver | Texas Instruments
MAX232EID

MAX232EID - 120kbps RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX232EID is a dual RS-232 line driver and receiver with a single 5 V supply, data rates up to 120 kbit/s, and enhanced electrostatic-discharge protection. It is housed in a 16-pin SOIC package and provides two transmit channels and two receive channels for bidirectional serial interfaces. An RS-232 transceiver is an interface IC that translates logic-level signals between a host or controller and a noisy, long-distance serial link. The MAX232EID uses a capacitive voltage generator to produce the positive and negative voltages required by TIA/EIA-232-F and ITU V.28 interfaces. This places it within the RS-232 transceiver, interface IC, and broader semiconductor hierarchy. Key features include operation from one 5 V supply, support for 1.0 µF charge-pump capacitors, a maximum data rate of 120 kbit/s, and receiver input levels extending to ±30 V. According to the Texas Instruments MAX232E product information, all RS-232 pins provide 15 kV human-body-model protection, 15 kV IEC61000-4-2 air-gap discharge protection, and 8 kV IEC61000-4-2 contact-discharge protection. The MAX232EID combines two drivers and two receivers with the internal charge-pump circuitry required to generate bipolar RS-232 voltage levels from a 5 V supply. Its receivers convert incoming RS-232 signals to 5 V TTL or CMOS levels, while its drivers convert TTL or CMOS logic into TIA/EIA-232-F-compatible output levels. This integration simplifies legacy serial-port and industrial-control designs. Typical applications include RS-232 ports on embedded systems, industrial controllers, test equipment, data-acquisition systems, and legacy computer peripherals. The 120 kbit/s operating rate supports many point-to-point serial links, while the enhanced ESD ratings are useful where a cable or connector can expose the interface to electrostatic discharge. Use the pin-description and typical-application information in the manufacturer datasheet when assigning connector and protection components. Confirm the external charge-pump capacitor values, supply decoupling, logic-level compatibility, and connector-side protection against the operating environment before releasing a PCB layout. This page combines the manufacturer specifications with practical interface guidance, package details, and verified drop-in comparison information. It helps engineers assess the MAX232EID for legacy RS-232 connectivity, identify compatible alternatives, and plan ESD-aware PCB implementation without changing the core transceiver architecture.

RFQ Contact
MAX232EIDR - 120kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX232EIDR

MAX232EIDR - 120kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)

The Texas Instruments MAX232EIDR is a dual RS-232 line driver and receiver with a single 5 V supply, data rates up to 120 kbit/s, and enhanced electrostatic-discharge protection. It is housed in a 16-pin SOIC package and provides two transmit channels and two receive channels for bidirectional serial interfaces. An RS-232 transceiver is an interface IC that translates logic-level signals between a host or controller and a noisy, long-distance serial link. The MAX232EIDR uses a capacitive voltage generator to produce the positive and negative voltages required by TIA/EIA-232-F and ITU V.28 interfaces. This places it within the RS-232 transceiver, interface IC, and broader semiconductor hierarchy. Key features include operation from one 5 V supply, support for 1.0 µF charge-pump capacitors, a maximum data rate of 120 kbit/s, and receiver input levels extending to ±30 V. According to the Texas Instruments MAX232E product information, all RS-232 pins provide 15 kV human-body-model protection, 15 kV IEC61000-4-2 air-gap discharge protection, and 8 kV IEC61000-4-2 contact-discharge protection. The MAX232EIDR combines two drivers and two receivers with the internal charge-pump circuitry required to generate bipolar RS-232 voltage levels from a 5 V supply. Its receivers convert incoming RS-232 signals to 5 V TTL or CMOS levels, while its drivers convert TTL or CMOS logic into TIA/EIA-232-F-compatible output levels. This integration simplifies legacy serial-port and industrial-control designs. Typical applications include RS-232 ports on embedded systems, industrial controllers, test equipment, data-acquisition systems, and legacy computer peripherals. The 120 kbit/s operating rate supports many point-to-point serial links, while the enhanced ESD ratings are useful where a cable or connector can expose the interface to electrostatic discharge. Use the pin-description and typical-application information in the manufacturer datasheet when assigning connector and protection components. Confirm the external charge-pump capacitor values, supply decoupling, logic-level compatibility, and connector-side protection against the operating environment before releasing a PCB layout. This page combines the manufacturer specifications with practical interface guidance, package details, and verified drop-in comparison information. It helps engineers assess the MAX232EIDR for legacy RS-232 connectivity, identify compatible alternatives, and plan ESD-aware PCB implementation without changing the core transceiver architecture.

RFQ Contact
MAX232EIDW - 250kbps RS-232 Transceiver | Texas Instruments
MAX232EIDW

MAX232EIDW - 250kbps RS-232 Transceiver | Texas Instruments

Texas Instruments MAX232EIDW is a dual-channel RS-232 line driver/receiver with a 250 kbps data rate, 5 V supply, and ±9 V driver output levels in a 16-pin SOIC (DW) package. It adds ±15 kV IEC 61000-4-2 ESD protection to the established MAX232 dual-driver, dual-receiver architecture. A RS-232 transceiver is an interface IC that converts logic-level signals between TTL/CMOS equipment and balanced, bipolar RS-232 lines. Within the interface hierarchy, the MAX232E belongs to the line-driver/receiver family, implements the RS-232 physical-layer interface, and supports communication between equipment that uses different voltage domains. Its integrated charge-pump circuitry generates the required positive and negative voltage from one 5 V supply. The device provides two transmit channels and two receive channels for full-duplex serial links. According to the Texas Instruments MAX232 datasheet, each receiver accepts inputs up to ±30 V, uses a typical threshold of 1.3 V, and has typical hysteresis of 0.5 V. The enhanced MAX232E variant supports 250 kbps operation and ±15 kV IEC-ESD protection, making it suitable for industrial control, instrumentation, and equipment interfaces exposed to electrostatic discharge. Internally, the charge-pump voltage generator produces the bipolar voltages required by RS-232 drivers while onboard capacitors provide the required charge-pump operation. The MAX232EIDW is specified for operation from −40 °C to +85 °C and uses the DW 16-pin SOIC package. Receiver inputs can withstand bipolar voltages up to ±30 V, while the drivers supply approximately ±9 V output levels for compliant RS-232 signaling. Typical uses include industrial serial consoles, programmable test equipment, data-acquisition systems, point-of-sale terminals, and embedded controllers communicating with legacy RS-232 peripherals. The ±15 kV ESD rating is especially useful where a connector cable can expose the interface to electrostatic discharge, although system-level protection and grounding remain necessary for long or outdoor cables. When laying out the circuit, place the charge-pump capacitors close to their associated pins and keep the RS-232 traces away from sensitive analog and high-speed digital paths. Provide a solid ground-plane connection and use appropriate cable transient protection when the interface leaves an enclosure. This page combines manufacturer specifications, replacement guidance, application engineering notes, and same-package comparisons for faster component selection and PCB planning.

RFQ Contact
MAX232EIDWG4 - Dual RS-232 Transceiver | Texas Instruments
MAX232EIDWG4

MAX232EIDWG4 - Dual RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX232EIDWG4 is a dual RS-232 line-driver and receiver transceiver with two transmit channels, two receive channels, and IEC 61000-4-2 electrostatic-discharge protection. It operates from a single 5 V supply in a 16-pin SOIC package, with an industrial temperature range of -40°C to +85°C. The MAX232EIDWG4 is intended for systems that require bidirectional RS-232 communication over longer distances than TTL logic can support reliably. An RS-232 transceiver is an interface IC that converts between single-ended TTL/CMOS logic and differential, bipolar RS-232 signals. Its line drivers convert outgoing logic levels into RS-232 levels, while its receivers convert incoming RS-232 signals into logic-compatible levels. The MAX232 family integrates the required charge-pump circuitry, drivers, and receivers, allowing a printed circuit board to implement two complete RS-232 channels without discrete level-shifting circuits. The principal feature of the MAX232EIDWG4 is its dual-channel architecture, which provides two drivers and two receivers in one 16-pin SOIC package. Integrated IEC 61000-4-2 protection improves interface robustness in industrial environments where cables and connector signals may be exposed to electrostatic discharge. Its -40°C to +85°C operating range supports both commercial and industrial equipment, while the SOIC package supports conventional surface-mount assembly and automated inspection. The device includes on-chip charge-pump circuitry for RS-232 signal generation, reducing the external component count compared with discrete driver designs. Charge-pump capacitors and supply bypass capacitors must be placed close to their associated pins to maintain stable operation. The SOIC footprint also requires consideration of lead pitch, board-edge clearance, and thermal performance when the transceiver is mounted near a power supply or in a densely routed enclosure. Typical applications include industrial serial controllers, laboratory instruments, data acquisition equipment, configuration ports, and service interfaces. It is especially useful when a legacy RS-232 port must coexist with a modern controller operating at TTL logic levels. Two channels can also support separate transmit and receive paths, full-duplex communication, or multiple interfaces sharing one package. For a new layout, follow the manufacturer datasheet pin-description table and recommended capacitor network exactly. Check the selected driver and receiver connections against the required RS-232 direction, grounding arrangement, and cable-side protection strategy. PCB creepage, isolation spacing, and exposed connector placement should be evaluated even when the IC itself includes ESD protection. This page organizes the MAX232EIDWG4 specifications, verified sourcing links, structured alternatives, application guidance, and design checks into one engineering-focused reference. It helps distinguish package, temperature-range, protection, and channel-count considerations before committing the part to an RS-232 interface design.

RFQ Contact
MAX232EIDWR - 250kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX232EIDWR

MAX232EIDWR - 250kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)

Texas Instruments MAX232EIDWR is a dual-channel RS-232 line driver/receiver with a 250 kbps data rate, 5 V supply, and ±9 V driver output levels in a 16-pin SOIC (DW) package. It adds ±15 kV IEC 61000-4-2 ESD protection to the established MAX232 dual-driver, dual-receiver architecture. A RS-232 transceiver is an interface IC that converts logic-level signals between TTL/CMOS equipment and balanced, bipolar RS-232 lines. Within the interface hierarchy, the MAX232E belongs to the line-driver/receiver family, implements the RS-232 physical-layer interface, and supports communication between equipment that uses different voltage domains. Its integrated charge-pump circuitry generates the required positive and negative voltage from one 5 V supply. The device provides two transmit channels and two receive channels for full-duplex serial links. According to the Texas Instruments MAX232 datasheet, each receiver accepts inputs up to ±30 V, uses a typical threshold of 1.3 V, and has typical hysteresis of 0.5 V. The enhanced MAX232E variant supports 250 kbps operation and ±15 kV IEC-ESD protection, making it suitable for industrial control, instrumentation, and equipment interfaces exposed to electrostatic discharge. Internally, the charge-pump voltage generator produces the bipolar voltages required by RS-232 drivers while onboard capacitors provide the required charge-pump operation. The MAX232EIDWR is specified for operation from −40 °C to +85 °C and uses the DW 16-pin SOIC package. Receiver inputs can withstand bipolar voltages up to ±30 V, while the drivers supply approximately ±9 V output levels for compliant RS-232 signaling. Typical uses include industrial serial consoles, programmable test equipment, data-acquisition systems, point-of-sale terminals, and embedded controllers communicating with legacy RS-232 peripherals. The ±15 kV ESD rating is especially useful where a connector cable can expose the interface to electrostatic discharge, although system-level protection and grounding remain necessary for long or outdoor cables. When laying out the circuit, place the charge-pump capacitors close to their associated pins and keep the RS-232 traces away from sensitive analog and high-speed digital paths. Provide a solid ground-plane connection and use appropriate cable transient protection when the interface leaves an enclosure. This page combines manufacturer specifications, replacement guidance, application engineering notes, and same-package comparisons for faster component selection and PCB planning.

RFQ Contact
MAX232EIN - 5V RS-232 Transceiver | Texas Instruments | DIP-16
MAX232EIN

MAX232EIN - 5V RS-232 Transceiver | Texas Instruments | DIP-16

The Texas Instruments MAX232EIN is a dual RS-232 driver and dual receiver interface IC with a 4.5 V to 5.5 V single supply, 250 kbps data rate, and IEC 61000-4-2 protection, housed in a 16-pin PDIP package. It provides two transmit channels and two receive channels for converting TTL/CMOS logic levels to RS-232 voltage levels and back again. A transceiver combines the functions of an RS-232 line driver and line receiver in one integrated circuit. In the broader semiconductor hierarchy, the MAX232EIN belongs to the interface IC class, where communication between systems with different voltage levels is handled by level-shifting and signal-conditioning devices. Its integrated charge-pump voltage generator allows the device to produce the positive and negative RS-232 voltages required by the standard from a single 5 V supply. The MAX232EIN is designed for 250 kbps data rates and uses on-chip protection against electrostatic discharge. Its integrated protection is identified in the product description as IEC 61000-4-2 protection, making it useful for industrial equipment, communications equipment, and other systems where an RS-232 connector may be exposed to user-contact transients. The 16-pin PDIP package is suitable for through-hole PCB layouts and hand-assembled prototypes. The device is used when a controller, terminal, printer, instrument, or another embedded system must communicate through an RS-232 port. Each receiver converts an RS-232 input to a logic-compatible signal, while each driver converts a logic input into an RS-232 output. The internal charge-pump circuit supplies the bipolar voltage levels required by the RS-232 interface without a separate negative power supply. For robust board implementation, place the charge-pump capacitors close to their associated pins and route the transmit and receive traces away from sensitive analog or high-speed digital signals. Decoupling capacitors should be located near the supply pins, and the external connector should include the required RS-232 signal-ground reference. The MAX232EIN is most appropriate when a single 5 V supply, a compact dual-channel interface, and a legacy RS-232 connection are required. This page combines the manufacturer device description with package information, drop-in comparison options, application guidance, and design notes for engineers selecting or replacing the MAX232EIN. The listed alternatives are limited to verified same-package choices; no cross-package RS-232 devices are presented as drop-in replacements.

RFQ Contact
MAX232EING4 - Dual RS-232 Transceiver | Texas Instruments
MAX232EING4

MAX232EING4 - Dual RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX232EING4 is a dual RS-232 line-driver and receiver interface IC with a 5 V supply, a maximum signaling rate of 250 kbps, and differential RS-232 outputs rated to ±9 V. The device is packaged in a 16-pin PDIP and provides on-chip charge-pump voltage conversion for a single-supply implementation. An RS-232 transceiver is an interface IC that converts low-voltage TTL or CMOS logic signals into RS-232 bipolar levels and converts incoming RS-232 signals back into logic-compatible levels. Within the interface hierarchy, the MAX232 belongs to the RS-232 transceiver class, connects digital logic to serial communication equipment, and forms part of a broader communications interface semiconductor. It is intended for point-to-point RS-232 links rather than multidrop networks. Key features include two driver and two receiver channels, 5 V operation, ±9 V RS-232 output levels, and ±2 kV ESD protection on the RS-232 pins. The 250 kbps maximum data rate supports common asynchronous serial interfaces when the associated baud rate, cable length, capacitance, and receiver loading permit reliable operation. An industrial temperature option allows operation from -40 °C to +85 °C. The MAX232 architecture uses charge-pump circuits to generate the positive and negative voltages required by RS-232 transmitters. Each driver converts a logic-high or logic-low input into a corresponding bipolar output, while each receiver uses thresholding to determine the incoming signal state. The integrated voltage conversion avoids a separate negative power supply, although external charge-pump capacitors are required. Typical applications include industrial serial controllers, data-acquisition equipment, instrumentation interfaces, service equipment, and legacy computer serial ports. The IC can bridge a UART or other CMOS/TTL controller to an RS-232 connector when signal polarity, grounding, and cable requirements are handled correctly. It is especially useful where a 5 V logic system must communicate with older RS-232 equipment. Designers should place the charge-pump capacitors close to their associated pins and provide a stable, low-impedance bypass path at the supply pins. Long or capacitively loaded cables can reduce the usable baud rate, and the grounded shield or signal ground must be connected according to the RS-232 interface standard. Input and output logic levels should also be checked against the UART voltage thresholds. This page combines the manufacturer’s electrical characteristics, package information, application guidance, drop-in candidates, and practical circuit considerations to support faster component selection and implementation.

RFQ Contact
MAX232EIPW - 250kbps RS-232 Transceiver | Texas Instruments
MAX232EIPW

MAX232EIPW - 250kbps RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX232EIPW is a dual RS-232 driver and receiver that provides two data channels at up to 250kbps from a single 5V supply. It uses an on-chip capacitive voltage generator to produce the bipolar TIA/EIA-232-F voltage levels required by RS-232, while the receivers convert remote serial signals to 5V TTL/CMOS logic. The device is available in a 16-pin TSSOP package. An RS-232 transceiver is an interface IC that bridges the voltage-domain difference between a digital controller and a physical RS-232 link. In the signal hierarchy, the MAX232EIPW belongs to the RS-232 transceiver class, which combines line drivers, line receivers, and charge-pump voltage generation within one interface package. Unlike a TTL/CMOS serial controller, this device does not implement a communication protocol; it converts logic levels and protects the physical interface. Key electrical features include 5V operation, dual transmit and receive channels, 250kbps maximum data rate, and approximately ±9V RS-232 output levels. According to the MAX232E product page, all RS-232 pins provide 15kV human-body-model and IEC61000-4-2 air-gap discharge protection. The line-driver pins additionally provide 8kV IEC61000-4-2 contact-discharge protection, making the interface suitable for industrial equipment, service ports, and external cables where electrostatic discharge is a practical concern. The integrated voltage generator eliminates the need for a separate negative supply rail. Four charge-pump capacitors allow the device to translate TTL/CMOS transmit inputs into RS-232 levels from one 5V supply. Each receiver converts a TIA/EIA-232-F input into a 5V TTL/CMOS signal, allowing a microcontroller, programmable logic controller, or test system to communicate over a legacy serial port without a separate level-shifting circuit. Typical uses include industrial control-panel service ports, configuration and debug interfaces, laboratory equipment, point-of-sale systems, and legacy peripherals that retain an RS-232 connection. The 250kbps capability supports moderate-rate command and data links, although the connected software protocol must also be configured for the selected baud rate. Because RS-232 is a point-to-point, single-ended interface, ground reference and cable routing remain important in multi-device installations. For PCB layout, place the charge-pump capacitors and the VCC bypass capacitor close to their associated pins, and route the RS-232 driver and receiver connections directly to the connector. Keep logic-side traces away from exposed cable-facing nets, provide a stable chassis or signal-ground connection strategy, and avoid long unprotected stubs. The integrated ESD protection reduces connector-side risk but does not eliminate the need for good mechanical grounding and cable management. This page consolidates the verified MAX232E electrical characteristics, ordering information, protection ratings, application guidance, and interface design considerations into a practical engineering reference. It also distinguishes the MAX232EIPW from related MAX232 and MAX3232E family members so engineers can assess pin compatibility, supply voltage, data rate, and package differences before approving a substitution.

RFQ Contact
MAX232EIPWG4 - Dual RS-232 Interface | Texas Instruments
MAX232EIPWG4

MAX232EIPWG4 - Dual RS-232 Interface | Texas Instruments

The Texas Instruments MAX232EIPWG4 is a dual RS-232 driver/receiver interface IC with two transmit channels, two receive channels, and IEC 61000-4-2 electrostatic-discharge protection. It operates from a single 5 V supply, supports data rates up to 120 kbit/s, and uses 1.0 uF charge-pump capacitors. The device is packaged in a 16-pin TSSOP package. According to the MAX232EIPWG4 datasheet, it meets or exceeds TIA/RS-232-F and ITU Recommendation V.28 while tolerating input levels up to plus or minus 30 V. An RS-232 transceiver is an interface IC that translates logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic levels. It belongs to the interface IC hierarchy, connects digital equipment to serial communication equipment, and handles the voltage conversion that the RS-232 standard requires. The MAX232EIPWG4 uses an internal charge-pump circuit to generate the positive and negative voltages needed by its two RS-232 drivers. Key features include two integrated drivers, two integrated receivers, operation from one 5 V power supply, 120 kbit/s operation, plus or minus 30 V receiver input capability, and IEC 61000-4-2 protection. The protected receiver inputs are particularly useful where cables connect to external equipment and electrostatic discharge may enter the system through the serial connector. Its integrated charge-pump design simplifies interface implementation compared with discrete level-shifting networks. Technically, the MAX232EIPWG4 combines RS-232 line drivers, RS-232 receivers, and regulated charge pumps in one package. The 1.0 uF charge-pump capacitors establish the internal voltage rails used by the drivers. Receiver inputs tolerate plus or minus 30 V levels, allowing the interface to remain connected to standard RS-232 ports when the local logic supply is 5 V. The device is intended for industrial-temperature operation, with a gull-wing TSSOP package suited to conventional surface-mount PCB assembly. Typical uses include industrial serial-control panels, test and measurement equipment, point-of-sale terminals, service-console links, and data-acquisition equipment. The dual-channel arrangement allows one device to support two RS-232 ports when both transmit and receive lines are required. Its 120 kbit/s capability is appropriate for legacy serial protocols, configuration interfaces, and equipment-control links rather than modern high-speed Ethernet or USB communication. PCB implementation should follow the manufacturer datasheet's charge-pump capacitor connection and keep the MAX232EIPWG4 close to the RS-232 connector. Confirm capacitor voltage rating, polarity, and placement against the datasheet requirements. Protect connector-side routing from unintended board contamination, and maintain suitable ground-return continuity between connected equipment. For a new design, verify that the remote equipment still uses RS-232 rather than RS-422, RS-485, or another differential interface. This page combines the device's stated electrical characteristics with application guidance, package-aware selection criteria, and verified drop-in alternatives. It also distinguishes true same-footprint replacements from parts that merely perform the same RS-232 function but require a different PCB footprint.

RFQ Contact
MAX232EIPWR - 250kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX232EIPWR

MAX232EIPWR - 250kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)

The Texas Instruments MAX232EIPWR is a dual RS-232 driver and receiver that provides two data channels at up to 250kbps from a single 5V supply. It uses an on-chip capacitive voltage generator to produce the bipolar TIA/EIA-232-F voltage levels required by RS-232, while the receivers convert remote serial signals to 5V TTL/CMOS logic. The device is available in a 16-pin TSSOP package. An RS-232 transceiver is an interface IC that bridges the voltage-domain difference between a digital controller and a physical RS-232 link. In the signal hierarchy, the MAX232EIPWR belongs to the RS-232 transceiver class, which combines line drivers, line receivers, and charge-pump voltage generation within one interface package. Unlike a TTL/CMOS serial controller, this device does not implement a communication protocol; it converts logic levels and protects the physical interface. Key electrical features include 5V operation, dual transmit and receive channels, 250kbps maximum data rate, and approximately ±9V RS-232 output levels. According to the MAX232E product page, all RS-232 pins provide 15kV human-body-model and IEC61000-4-2 air-gap discharge protection. The line-driver pins additionally provide 8kV IEC61000-4-2 contact-discharge protection, making the interface suitable for industrial equipment, service ports, and external cables where electrostatic discharge is a practical concern. The integrated voltage generator eliminates the need for a separate negative supply rail. Four charge-pump capacitors allow the device to translate TTL/CMOS transmit inputs into RS-232 levels from one 5V supply. Each receiver converts a TIA/EIA-232-F input into a 5V TTL/CMOS signal, allowing a microcontroller, programmable logic controller, or test system to communicate over a legacy serial port without a separate level-shifting circuit. Typical uses include industrial control-panel service ports, configuration and debug interfaces, laboratory equipment, point-of-sale systems, and legacy peripherals that retain an RS-232 connection. The 250kbps capability supports moderate-rate command and data links, although the connected software protocol must also be configured for the selected baud rate. Because RS-232 is a point-to-point, single-ended interface, ground reference and cable routing remain important in multi-device installations. For PCB layout, place the charge-pump capacitors and the VCC bypass capacitor close to their associated pins, and route the RS-232 driver and receiver connections directly to the connector. Keep logic-side traces away from exposed cable-facing nets, provide a stable chassis or signal-ground connection strategy, and avoid long unprotected stubs. The integrated ESD protection reduces connector-side risk but does not eliminate the need for good mechanical grounding and cable management. This page consolidates the verified MAX232E electrical characteristics, ordering information, protection ratings, application guidance, and interface design considerations into a practical engineering reference. It also distinguishes the MAX232EIPWR from related MAX232 and MAX3232E family members so engineers can assess pin compatibility, supply voltage, data rate, and package differences before approving a substitution.

RFQ Contact
MAX232EPE+ - +5V RS-232 Transceiver, 2/2, 16-PDIP | Maxim Integrated
MAX232EPE

MAX232EPE+ - +5V RS-232 Transceiver, 2/2, 16-PDIP | Maxim Integrated

The Maxim Integrated MAX232EPE+ is a +5V-powered, multichannel RS-232 line driver/receiver from the MAX220-MAX249 family, providing 2 drivers and 2 receivers (2/2) in a 16-pin PDIP through-hole package. It operates from a single 4.5V to 5.5V supply and generates the required RS-232 ±10V output levels internally using an integrated charge-pump with four external 1µF capacitors — eliminating the need for a ±12V power rail. Typical data rate is 120 kbps, and the device is qualified for the extended industrial -40°C to +85°C operating temperature range. What is an RS-232 transceiver? An RS-232 transceiver is a type of interface IC that translates logic-level signals (0/3.3V or 0/5V) to and from the ±5V to ±15V voltage levels defined by the EIA/TIA-232E (formerly RS-232) and ITU V.28/V.24 standards for serial communication. These parts sit in the hierarchy: RS-232 transceiver → line driver/receiver → interface IC → communication IC → semiconductor, and have been the workhorse of point-to-point PC serial ports since the 1980s. Charge-pump-based transceivers like the MAX232 family made the standard practical by removing the need for a dual-polarity power rail. Key features of the MAX232EPE+ include: integrated charge pump with internal ±10V generation, compatibility with all EIA/TIA-232E and V.28/V.24 interfaces, ESD protection on RS-232 pins, and low-power CMOS construction. The 16-PDIP package suits through-hole designs, breadboarding, and legacy equipment maintenance where SMD parts are not desirable. The device uses a dual charge-pump (voltage doubler and inverter) topology: the doubler boosts +5V to +10V using external capacitors, and the inverter produces -10V, yielding ±10V swing across each transmitter output. Receivers invert TTL/CMOS levels back to 5V logic. This architecture makes the MAX232 family ideal when a single +5V rail is available and ±12V cannot be provided. Typical applications include legacy PC serial ports, industrial PLCs and HMIs, point-of-sale terminals, embedded microcontroller UART interfaces, barcode scanners, and any system requiring a DB9 or similar RS-232 connection from a 5V logic domain. The extended temperature range suits factory automation environments. When designing with the MAX232EPE+, choose external charge-pump capacitors carefully — 1µF to 10µF ceramic or tantalum types are typical; undersized caps reduce driver output swing. Place the charge-pump caps and bypass cap within a few millimeters of the IC pins to maintain transmitter output compliance. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet, helping engineers select and source the right RS-232 transceiver for legacy 5V designs.

RFQ Contact
MAX232ESE+ - Dual RS-232 Transceiver | Maxim Integrated
MAX232ESE+

MAX232ESE+ - Dual RS-232 Transceiver | Maxim Integrated

The Maxim Integrated MAX232ESE+ is a dual RS-232 line-driver and receiver interface IC operating from a 4.5 V to 5.5 V supply in a 16-pin SOIC package. It provides two transmit channels and two receive channels for systems that cannot directly use ±12 V RS-232 levels. The device supports data rates up to 120 kbps and is designed for EIA/TIA-232E, CCITT V.28, and V.24 communications interfaces. An RS-232 transceiver is an interface IC that converts low-voltage digital logic signals into RS-232-compatible electrical levels and converts incoming RS-232 signals back into logic-compatible levels. Within the broader hierarchy of interface ICs, transceiver ICs connect processor or controller logic to communication ports. The MAX232 family is especially useful where a positive single supply is available but the external line requires bipolar RS-232 voltage levels. The MAX232ESE+ uses CMOS circuitry and includes the charge-pump circuitry required to generate the bipolar levels used by the RS-232 drivers. Two driver outputs support transmit channels, while two receiver inputs support receive channels. Its stated operating supply range of 4.5 V to 5.5 V supports conventional +5 V digital systems. The manufacturer describes the family as particularly suitable for battery-powered equipment because a shutdown mode can reduce power consumption when the interface is not active. Its principal application is point-to-point serial communication between a host controller and an external RS-232 device. Typical examples include industrial control terminals, data-acquisition equipment, service interfaces, and legacy peripheral connections. At data rates up to 120 kbps, the device accommodates many legacy asynchronous serial protocols while operating from a single 5 V rail. A 120 kbps capability should not be confused with the much higher data rates sometimes associated with USB-to-serial converters. Circuit design requires correct treatment of RS-232 signal levels, including ground reference and, where cable length or noise conditions require it, protection for the external interface. Charge-pump capacitors must be connected exactly as shown in the manufacturer’s recommended application circuit. Keep the charge-pump and communication traces away from sensitive analog inputs, and verify the logic levels and connector-side protection before releasing a board. This page combines the manufacturer interface specifications, package information, application guidance, and verified cross-reference findings in a format intended for schematic review and sourcing decisions. It also distinguishes pin-compatible alternatives from options that require different packages or electrical changes, helping engineers assess replacement risk before modifying a PCB.

RFQ Contact
MAX232ESE+T - 120kbps RS-232 Transceiver | Analog Devices
MAX232ESE+T

MAX232ESE+T - 120kbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX232ESE+T is a +5 V-powered, two-driver and two-receiver RS-232 transceiver packaged in a 16-pin SOIC. It supports data rates up to 120 kbps and implements EIA/TIA-232E and V.28/V.24-compatible communications interfaces. Its integrated capacitive voltage generator produces the bipolar RS-232 voltage levels required by the driver outputs from a single 5 V supply, avoiding a separate negative power rail. An RS-232 transceiver is an interface IC that combines a transmitter and receiver in one package. A line driver converts logic-level signals into differential, bipolar RS-232 signals, while a line receiver converts bipolar signals back into logic levels. The MAX232ESE+T belongs to the broader RS-232 interface transceiver category, where EIA/TIA-232E, V.28, and V.24 define the electrical behavior and communication characteristics of the interface. The device includes two transmit channels and two receive channels in a 16-pin SOIC. According to the manufacturer product page, the MAX232E family meets EIA/TIA-232E and CCITT V.28 specifications at data rates up to 120 kbps when loaded. This makes the part suitable for legacy serial ports, industrial equipment, service interfaces, and embedded systems that retain an RS-232 connection. The MAX232ESE+T combines a +5 V supply with on-chip charge-pump circuitry for the negative driver voltage. This integration allows the interface to operate without a separate negative supply, while the capacitive charge pump adds only a small number of external charge-pump capacitors. The E designation denotes the enhanced MAX232 family, while the suffix identifies the package, temperature option, and lead-free tape-and-reel shipping configuration. Typical uses include RS-232 links between industrial controllers and service equipment, configuration ports on network appliances, legacy printer and instrument interfaces, and diagnostic connections on embedded systems. Designers should treat the RS-232 driver outputs as not tolerant of the negative voltages found on telephone lines, and they should provide the charge-pump and interface capacitors specified by the manufacturer. For PCB layout, place the charge-pump capacitors and VCC bypass capacitor close to their associated device pins, and route each driver output directly to its RS-232 connector. Keep logic-side traces away from the higher-voltage driver outputs to reduce capacitive coupling and data errors, especially when long connector cables are attached. This product page combines the manufacturer’s device description, distributor package identification, lifecycle information, replacement analysis, and practical RS-232 layout guidance. It is intended to help engineers verify electrical fit, package compatibility, sourcing requirements, and board-level implementation before committing a MAX232ESE+T to a new or existing design.

RFQ Contact
MAX232EWE+ - Dual RS-232 Transceiver, 5V | Maxim
MAX232EWE+

MAX232EWE+ - Dual RS-232 Transceiver, 5V | Maxim

The Maxim Integrated MAX232EWE+ is a +5 V-powered, dual RS-232 transceiver with two drivers and two receivers, a maximum data rate of 120 kbps, and a 4.5 V to 5.5 V supply range. The device is packaged in a 16-pin SOIC and is designed for bidirectional RS-232 level translation between a modern CMOS or TTL-based system and an RS-232 port. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic-compatible levels. In the product hierarchy, the MAX232EWE+ is a dual line transceiver within the broader RS-232 interface IC and semiconductor categories. Its two driver and two receiver channels allow one connector to carry two independent RS-232 data paths, reducing the number of interface components required in multi-channel equipment. The principal operating characteristics are a 4.5 V to 5.5 V supply range, 120 kbps maximum data rate, two transmitters, two receivers, CMOS-compatible logic, and a 16-pin SOIC package. The E in the EWE package code identifies the manufacturer’s specified package variant, while the plus suffix denotes the current ordering designation shown in the product listings. The wide SOIC package measures 7.50 mm across the width dimension stated in the product record. The MAX232 family uses integrated charge-pump circuitry to generate the positive and negative voltage levels required by RS-232. Those levels allow the interface to overcome the voltage thresholds and noise margin associated with unbalanced, single-ended communications. Because the device includes both transmit and receive functions, each logical channel can use one driver and one receiver when full-duplex point-to-point communication is required. Typical uses include industrial serial-control equipment, test and measurement instruments, data acquisition systems, point-of-sale terminals, and embedded control systems that expose an RS-232 port. It is most appropriate where a legacy RS-232 interface must coexist with a 5 V CMOS or TTL control platform. USB-to-RS-232 conversion is another possible use when the host controller already provides UART-compatible logic signals. PCB layout should keep the interface and charge-pump components close to the device and should route the RS-232 traces away from sensitive analog and high-speed digital signals. Decoupling capacitors must follow the capacitor-selection and layout guidance in the manufacturer datasheet. Before substituting a different transceiver, verify the complete pinout, supply range, driver and receiver counts, maximum data rate, logic thresholds, and connector-side voltage levels rather than relying on package dimensions alone. This page organizes the MAX232EWE+ specifications, practical design considerations, application guidance, and qualified drop-in alternatives into an engineering-focused reference. It also distinguishes the known channel, speed, voltage, and package characteristics from parameters that require confirmation in the manufacturer datasheet before production release.

RFQ Contact