Products (21,000+)

MC9S08PA4VWJ - 8-Bit S08 MCU, 4KB Flash, 20MHz, 20-SOIC | NXP
MC9S08PA4VWJ

MC9S08PA4VWJ - 8-Bit S08 MCU, 4KB Flash, 20MHz, 20-SOIC | NXP

The NXP Semiconductors MC9S08PA4VWJ is an 8-bit S08 microcontroller with 4 KB of Flash memory, a 20 MHz bus operating from a 2.7 V to 5.5 V supply, and a 20-pin SOIC package. It is designed for cost-sensitive embedded control in appliances, small motor drives, lighting, and low-cost industrial nodes where an on-chip 12-bit ADC, analog comparator, and EEPROM simplify the bill of materials. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory, data memory, and peripherals such as timers, serial interfaces, and analog converters. The S08 core sits inside the broader hierarchy of embedded controllers: MCU -> 8-bit microcontroller -> S08 family -> S08P scalable platform. The S08P family reuses the same core, IP, and development tools across pin-compatible members, which makes migration between density grades straightforward. Key features of the MC9S08PA4VWJ include an 8-bit S08 central processor unit running up to 20 MHz, 4 KB of program Flash, an integrated 12-bit analog-to-digital converter, an analog comparator, EEPROM data memory, and a motor control Flex Timer Module. The device supports up to 40 interrupt and reset sources with up to four levels of nested interrupts, allowing real-time responses without software polling overhead. The device is specified across a 2.7 V to 5.5 V operating supply range, which covers both 3.3 V and 5 V system rails, and the extended temperature option supports -40 degrees C to +105 degrees C industrial ambient conditions. Because the S08P platform is a scaled 5 V family, the on-chip voltage regulator and bus clocking are designed for reliable 5 V operation rather than low-voltage micro-power duty cycles. Typical applications include small brushless DC motor controllers, fan and pump speed controls, appliance user interfaces, LED lighting drivers, keypad and panel interfaces, and simple sensor conditioning nodes. The ADC plus comparator pairing also suits battery monitoring, thermistor, and potentiometer front ends where a dedicated external converter would otherwise add cost. When designing around this part, remember that the 20 MHz bus speed is guaranteed at 2.7 V and above across the full temperature range, so no derating is needed for industrial environments. Use the pin description table in the manufacturer data sheet for exact ball and pad assignments, and keep the on-chip regulator and decoupling network close to the supply pins to limit switching and analog noise on the ADC reference. This page brings together lifecycle status, package and pin information, drop-in upgrade paths within the S08P family, and practical layout guidance so that engineers can evaluate the MC9S08PA4VWJ against larger-memory alternatives before committing to a board spin.

RFQ Contact
MC9S08PA60VLF-FR - 60KB Flash 8-bit S08 MCU | NXP LQFP-48
MC9S08PA60VLF-FR

MC9S08PA60VLF-FR - 60KB Flash 8-bit S08 MCU | NXP LQFP-48

The NXP Semiconductors MC9S08PA60VLF-FR is a 5V 8-bit S08 microcontroller with 60KB of embedded Flash, 4KB of SRAM, and 256 bytes of EEPROM, housed in a 48-pin LQFP package. It operates up to 20 MHz bus across a 2.7 V to 5.5 V supply range and supports industrial temperatures from -40 °C to +105 °C. An 8-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU, program memory (Flash), data memory (RAM), and peripherals such as timers, ADCs, and communication interfaces. The S08 core family uses the Freescale/NXP S08 instruction set, an enhanced evolution of the HC08 architecture, with a 16-bit address space and on-chip hardware multiply/divide. Within the broader taxonomy, the S08PA sits as: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. This part targets cost-sensitive embedded designs that require 5 V tolerance, robust ESD/EFT immunity, and a scalable peripheral set across the S08P family. Key features of the MC9S08PA60VLF-FR include a 12-channel 12-bit ADC, an analog comparator with internal 6-bit DAC reference, up to three timers including a 2-channel FlexTimer (FTM) with motor-control capability, up to two SCI (UART) modules, and one SPI. Internal 1 kHz LPO and 4–20 MHz ICS oscillators remove the need for an external crystal in many designs. The 48-LQFP pin-out exposes up to 39 GPIO with programmable drive strength, slew-rate control, and interrupt-on-edge. Hardware CRC, watchdog, and low-voltage detect improve functional safety. Typical applications include motor control (small BLDC and brushed DC drivers), home appliances and white goods, industrial control modules, lighting control, point-of-load control, and consumer electronics user interfaces. The wide 5 V supply tolerance makes it well suited for legacy 5 V rails in industrial plants and automotive body modules (non-safety sub-systems). When designing, ensure the VDD decoupling network (100 nF + 4.7 µF) is placed within 5 mm of the pins, route the ICS oscillator traces as guarded differential pairs, and avoid routing analog ADC channels across switching node return paths. The on-chip EEPROM with built-in charge pump supports in-application byte erase/write without external hardware. This page synthesizes NXP distributor pricing, same-family drop-in alternatives, and practical design notes that complement the manufacturer datasheet by enabling quick sourcing and footprint decisions.

RFQ Contact
MC9S08PA60VLH - 8-Bit 20MHz 60KB MCU | NXP | 64-LQFP
MC9S08PA60VLH

MC9S08PA60VLH - 8-Bit 20MHz 60KB MCU | NXP | 64-LQFP

The NXP MC9S08PA60VLH is an 8-bit S08 microcontroller with a 20 MHz operating frequency, 60 KB of flash memory, 2 KB of RAM, and a 64-LQFP 10 x 10 mm package. It is designed for cost-sensitive automotive and industrial control systems that require a compact 8-bit MCU, integrated analog peripherals, and a broad operating-voltage range. An 8-bit microcontroller is a programmable semiconductor that executes instructions using an 8-bit data path. The S08 family combines a conventional embedded-control core with flash program memory, RAM, timers, serial interfaces, and analog conversion functions. Within the product hierarchy, the MC9S08PA60VLH belongs to the S08 family of 8-bit microcontrollers and serves as a system-level controller rather than a simple logic or analog component. The primary features of this device are its 20 MHz maximum clock, 60 KB flash capacity, 2 KB RAM, and 64-pin LQFP construction. Its flash memory supports firmware retention without a separate external memory device, while the 2 KB RAM provides working space for stacks, buffers, and control variables. The package also offers enough peripheral and power connections for mixed-signal industrial and automotive equipment operating from a qualified low-voltage supply. The S08 architecture is suited to real-time control tasks that do not require the throughput of a 32-bit processor. Timers and event-driven control can manage motor, actuator, sensor, and communication functions, while integrated analog resources support signal acquisition and threshold-based monitoring. Compared with a discrete controller design, consolidation into one MCU reduces external logic, simplifies firmware organization, and frees board area in compact equipment. Typical applications include automotive body and control modules, industrial sensing equipment, motor-control helpers, low-cost instrumentation, and appliance or building-control products. For a 20 MHz control loop or mixed-signal acquisition system, the combination of 60 KB flash and 2 KB RAM allows more application code and data buffering than a small entry-level MCU while retaining the simplicity of an 8-bit architecture. Designers should preserve the pinout, power-supply requirements, decoupling, and programming interface defined by the NXP datasheet. The 64-LQFP footprint requires adequate PCB assembly capability, and unused pins should be terminated according to the manufacturer’s recommendations. Firmware development should also use the supported NXP debug and programming tools identified in the device documentation. This product page combines lifecycle information, source-backed electrical attributes, structured comparison data, replacement constraints, and practical integration guidance. It distinguishes exact package and temperature-order variants from merely similar controllers, helping engineers identify a genuinely pin-compatible replacement before committing a PCB revision.

RFQ Contact
MC9S08PA60VQH - S08 8-bit MCU, 60KB Flash, 64-QFP | NXP
MC9S08PA60VQH

MC9S08PA60VQH - S08 8-bit MCU, 60KB Flash, 64-QFP | NXP

The NXP MC9S08PA60VQH is an 8-bit S08PA family microcontroller featuring a 60 KB flash memory, 20 MHz CPU clock, and 57 general-purpose I/O pins in a 64-pin LQFP package (14 x 14 mm). It integrates on-chip EEPROM, ADC, analog comparator, PWM, and a motor-control FlexTimer to simplify embedded designs in cost-sensitive industrial and consumer applications. An 8-bit microcontroller (MCU) is a single-chip processor that integrates CPU, RAM, non-volatile program memory (Flash/ROM), and peripherals such as timers, ADC, and communication interfaces. Within the semiconductor taxonomy, an 8-bit MCU sits below 32-bit microcontrollers and above simple logic ICs in the integrated-circuits hierarchy: 8-bit MCU -> microcontroller -> microprocessor -> integrated circuit -> semiconductor. The S08PA family from NXP is positioned at the low end of the S08 line, offering 5 V operation and excellent EFT/ESD immunity for harsh electrical environments. The MC9S08PA60VQH operates from 2.7 V to 5.5 V supply, includes an internal clock source, and supports multiple low-power stop and wait modes for battery-powered applications. Connectivity is provided through I2C, SPI, LIN-bus, and UART/USART peripherals, while 8-bit and 16-bit timers, a 12-channel ADC, and a FlexTimer with PWM outputs target motor control and power-conversion designs. On-chip peripherals include low-voltage detection (LVD), power-on reset (POR), and a watchdog timer (WDT) for safety-critical embedded systems. According to NXP datasheet MC9S08PA60 Rev. 4 (09/2019), the device supports background debugging via the standard S08 BDM interface and is part of a scalable, pin-compatible S08P family for easy migration from older 8-bit S08 products. Typical applications include low-cost motor control (BLDC, stepper, and brushed DC), AC home appliances, HVAC controls, automotive body electronics (LIN nodes), and battery-powered sensor nodes. The on-chip EEPROM supports non-volatile parameter storage for field-configurable products, while the analog comparator enables zero-crossing detection without external components. When designing with this MCU, ensure the supply rail is well-decoupled with 100 nF plus 10 uF bulk capacitors placed close to VDD/VSS pairs. Use the internal clock generator with appropriate reference trimming for cost-sensitive designs, or an external crystal when communication baud-rate accuracy is required.

RFQ Contact
MC9S08PA8AVLD - 8-bit S08 MCU 8KB Flash 44-LQFP | NXP
MC9S08PA8AVLD

MC9S08PA8AVLD - 8-bit S08 MCU 8KB Flash 44-LQFP | NXP

The NXP MC9S08PA8AVLD is an 8-bit microcontroller based on the S08 CISC core, running at up to 20 MHz bus speed from a 2.7 V to 5.5 V supply, with 8 KB of flash memory in a 44-pin LQFP (10x10 mm) package. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory (flash), data memory (RAM), and peripherals such as timers, ADCs, and serial interfaces on one die. Within the product hierarchy, the S08P family sits under NXP's S08 core architecture, which itself belongs to the broader category of embedded microcontrollers and power-management ICs used in cost-sensitive embedded control systems. Key features of the MC9S08PA8AVLD include the S08 central processor unit supporting up to 20 MHz bus operation across the -40C to +105C temperature range, up to 40 interrupt/reset sources with four-level nested interrupt support, integrated EEPROM for data storage, an ADC and an analog comparator, and a motor-control flex timer. NXP highlights the family's excellent EFT/ESD performance and scalable, pin-compatible design that eases migration from legacy 8-bit S08 products. Architecturally, the S08 CPU reuses proven Freescale (now NXP) S08 core IP and development tools, allowing firmware written for older HC08/S08 devices to be ported with minimal changes. The on-chip flash is read/program/erase capable over the full voltage and temperature range, and the integrated EEPROM eliminates the need for an external non-volatile memory device, reducing bill-of-materials cost in small systems. Typical applications include cost-sensitive automotive body electronics, small motor control (using the flex timer), home appliances, consumer electronics, and simple industrial sensing nodes where an ADC and analog comparator are required but 32-bit performance is unnecessary. A key design consideration is supply voltage: the 2.7 V to 5.5 V range supports both 3.3 V and 5 V systems, but flash timing and analog accuracy specifications should be verified across the full voltage range per the manufacturer datasheet. Use the background debug interface for in-circuit flash programming. This page synthesizes distributor pricing from DigiKey, Mouser, LCSC, Heisener and Octopart, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Pricing references are as of 2026-10-18.

RFQ Contact
MC9S08PA8AVTG - 8-bit S08 MCU 8KB Flash 20MHz TSSOP-16 | NXP
MC9S08PA8AVTG

MC9S08PA8AVTG - 8-bit S08 MCU 8KB Flash 20MHz TSSOP-16 | NXP

The NXP Semiconductors MC9S08PA8AVTG is an 8-bit microcontroller based on the S08 (HCS08L) CISC core, running at up to 20 MHz with 8 KB of flash memory, integrated EEPROM, and a 16-pin TSSOP package. It operates from a 5V supply and integrates analog peripherals including an ADC and analog comparator, targeting cost-sensitive automotive and industrial applications. An 8-bit microcontroller is a self-contained computing device that integrates a CPU core, program memory (flash), data memory (RAM), and peripherals on a single chip. Within the power management and embedded control hierarchy, an MCU such as the S08PA family member sits at the lowest system layer, replacing discrete logic and analog control circuits with firmware-driven control, which reduces bill-of-materials cost and board area in high-volume products. Key features include 8 KB (8K x 8) of on-chip flash for code storage, on-board EEPROM for parameter retention without external memory, a 20 MHz internal bus clock, and an integrated analog comparator plus ADC that simplify mixed-signal designs. The flex timer peripheral supports motor control topologies such as PWM generation for BLDC and brushed DC drives, a distinguishing capability at this price point. Technically, the S08 core is a CISC architecture descended from the 6808/HCS08 lineage, offering dense code and mature development tool support through NXP CodeWarrior. Low-power modes allow sleep currents suitable for always-on automotive body functions, and the 5V operating range provides robust noise immunity in electrically harsh 12V vehicle environments where 3.3V parts require level shifting. Typical applications include automotive body electronics (door modules, seat control, lighting), small motor control drives, and industrial sensors and actuators where flash-plus-EEPROM integration eliminates external memory components. A key design consideration is supply decoupling: place a 100 nF ceramic capacitor directly at the VDD pin, and use the internal clock sources where possible to minimize external crystal cost, trading slight frequency accuracy for component savings. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing verified as of 2026-10-18.

RFQ Contact
MC9S08PA8VGT - 8-bit 20MHz 8KB Flash MCU | NXP TSSOP-16
MC9S08PA8VGT

MC9S08PA8VGT - 8-bit 20MHz 8KB Flash MCU | NXP TSSOP-16

The NXP MC9S08PA8VGT is an 8-bit microcontroller built on the HCS08L core, delivering 20MHz operation with 8KB of Flash memory in a 16-pin TSSOP package. It is part of the S08PA family optimized for cost-sensitive automotive and industrial applications requiring low-power modes and integrated analog peripherals. An 8-bit microcontroller (MCU) is a compact processor that integrates a CPU, memory, timers, communication peripherals, and analog functions onto a single silicon die. In the broader embedded taxonomy, 8-bit MCUs sit below 16-bit and 32-bit devices but above discrete logic in capability, making them well suited for real-time control where cost and power are dominant constraints and raw compute throughput is secondary. Key features of the MC9S08PA8VGT include 8KB of Flash program memory, 128 bytes of EEPROM, and up to 256 bytes of RAM. The device integrates a 12-channel 10-bit ADC, two analog comparators, three timers, and a multi-purpose PWM module. Low-power Run, Wait, and Stop modes with rapid wake-up time allow the MCU to support battery-friendly sensor interfaces and standby-friendly industrial node designs. Architecturally, the HCS08L core is a low-power variant of the Freescale/NXP HCS08 family, supporting the S08 instruction set with BDM (Background Debug Mode) and on-chip in-circuit programming for field updates. An integrated 1kHz low-frequency oscillator plus the option of an external crystal provide flexibility for low-power or precision timing designs. Typical applications include automotive body controllers, sensor signal conditioning modules, appliance control panels, remote keyless entry transmitters, and industrial low-power nodes. The wide operating voltage range and AEC-Q100-style qualification path make the MC9S08PA8VGT particularly attractive in automotive subsystems and ruggedized industrial sensors. When designing with this MCU, ensure the supply decoupling uses a 100nF ceramic capacitor placed within 5mm of each VDD pin, and that unused ADC inputs are tied to a defined voltage to prevent shoot-through. For low-noise analog sampling, configure the ADC clock below 4MHz to maintain data-sheet-grade linearity. This page synthesizes distributor pricing, drop-in alternatives, and design notes not consolidated in the original NXP datasheet - a practical reference for engineers evaluating or second-sourcing the MC9S08PA8VGT.

RFQ Contact
MC9S08PA8VLC - 8-bit S08 MCU 8KB Flash 32-LQFP | NXP
MC9S08PA8VLC

MC9S08PA8VLC - 8-bit S08 MCU 8KB Flash 32-LQFP | NXP

The NXP MC9S08PA8VLC is an 8-bit microcontroller from the S08PA family, built around the HCS08 core, integrating 8KB of Flash program memory in a 32-pin LQFP (7x7 mm) package. It operates over a wide supply range of 2.7 V to 5.5 V, runs at up to 20 MHz bus frequency, and delivers a balance of low power consumption and integrated peripherals for cost-sensitive embedded designs. An 8-bit MCU is a microcontroller whose central processing unit performs arithmetic and logic on 8-bit data words, sufficient for simple control loops, user-interface logic, sensor reading, and actuator driving without the software overhead of a 32-bit core. The MC9S08PA8VLC belongs to the broader category of microcontrollers -> embedded processors -> semiconductor ICs, placing it squarely in the lowest tier of complexity but with the smallest bill of materials for typical appliance, lighting, and motor-control nodes. Key features include 8KB on-chip Flash, 2KB SRAM, an integrated 12-bit SAR ADC with up to 16 channels, an analog comparator, hardware timers including a FlexTimer for motor control, EEPROM, an 8-bit keyboard interrupt module, and a touch-sensing interface (TSI). The S08 core uses a HCS08 instruction set with background debug mode, enabling in-circuit programming and on-chip debug through a single-wire BDM interface. The 32-pin LQFP and a 20 MHz clock allow the device to replace legacy HC08 designs with negligible code porting effort. Typical applications include BLDC ceiling-fan motor control, washing-machine control boards, induction cooktops, low-end smoke detectors, and simple sensor hubs. The integrated FlexTimer and analog comparator make it well suited for low-cost variable-frequency drive and hardware-protect functions. A typical design uses the ADC for current sensing and the comparator for over-current hardware shutdown. Design tradeoffs include limited code space (8KB Flash) and absence of USB or CAN, which restrict use in connected designs; for those, choose the larger S08AC or Kinetis E series. When laying out the PCB, keep the decoupling capacitor within 5 mm of the VDD pin to meet in-circuit noise requirements during ADC conversions. XAIPART synthesizes distributor pricing, drop-in alternatives, and design notes not always captured in the manufacturer datasheet, including the lifecycle status shown on NXP's product page.

RFQ Contact
MC9S08PA8VLD - 8-Bit 20MHz S08 Microcontroller | NXP
MC9S08PA8VLD

MC9S08PA8VLD - 8-Bit 20MHz S08 Microcontroller | NXP

NXP Semiconductors MC9S08PA8VLD is an 8-bit S08 microcontroller with 8 KB of flash memory, 512 bytes of RAM, a 16-bit timer, an analog-to-digital converter, and an analog comparator. It is offered in a 44-pin LQFP package measuring 10 mm by 10 mm. The distributor product listing identifies a maximum clock frequency of 20 MHz, making the device suitable for compact embedded-control systems that require deterministic peripheral operation and a modest amount of nonvolatile program memory. A microcontroller is a semiconductor device that combines a processor core, memory, and configurable peripherals on one integrated circuit. The 8-bit S08 core belongs to the broader MCU category and is intended for embedded control rather than high-performance computing. MC9S08PA8VLD combines that processor architecture with flash, RAM, timer, ADC, and comparator resources, allowing a design to sense analog inputs, execute control logic, and operate external actuators from a relatively compact package. The principal feature set supports cost-sensitive embedded applications. Eight kilobytes of flash provides room for the application program and fixed data, while 512 bytes of RAM support working variables and stack activity. The integrated 16-bit timer is useful for periodic scheduling, event counting, pulse measurement, and motor-control timing. The ADC supports analog measurement, and the analog comparator provides a lower-complexity threshold-detection function for sensor and protection circuits. MC9S08PA8VLD is associated with cost-sensitive automotive and consumer applications, according to NXP product information. Its 44-LQFP package exposes more interface pins than a small-outline package and can simplify access to port pins, timer channels, analog inputs, debug functions, and power connections. The 10 mm by 10 mm body provides a practical land pattern for conventional through-hole assembly or mixed-technology PCB assembly, subject to the detailed pin and layout guidance in the NXP documentation. Typical uses include automotive body and accessory controllers, consumer-control modules, small motor-control systems, appliance control boards, and compact sensing products. The timer and analog resources allow a single MCU to coordinate periodic actions and monitor external signals without requiring separate analog or timing ICs. This integration can reduce board area and simplify firmware architecture when the control algorithm does not require a higher-bit-width processor. Design work should begin with the NXP datasheet pin-description table, electrical characteristics, and reference manual. Confirm the selected clock configuration, oscillator requirements, programming method, reset behavior, and decoupling requirements before layout. Because pin multiplexing and legacy 8-bit MCU timing can constrain peripheral assignments, validate every motor, ADC, and communication signal against the package pinout rather than relying on a generic S08PA board pattern. This product page combines manufacturer status information, distributor specifications, package details, application guidance, and replacement screening. It also distinguishes verified device characteristics from parameters that must be confirmed in the official documentation, helping engineers plan assembly, firmware development, and lifecycle-aware sourcing without relying on generic MCU assumptions.

RFQ Contact
MC9S08PA8VTG - 8-Bit 20MHz MCU, 8KB Flash | NXP
MC9S08PA8VTG

MC9S08PA8VTG - 8-Bit 20MHz MCU, 8KB Flash | NXP

The NXP Semiconductors MC9S08PA8VTG is an 8-bit S08-family microcontroller with a 20 MHz HCS08L core, 8 KB of Flash memory, 512 bytes of RAM, and a 16-pin TSSOP package. It is designed for cost-sensitive automotive and industrial controls that require embedded flash, integrated analog functions, timers, and a compact surface-mount footprint. An 8-bit microcontroller is a microprocessor optimized for embedded control tasks. The S08 architecture combines a central processing unit, nonvolatile program memory, volatile data memory, timers, serial interfaces, and analog peripherals in one integrated circuit. Within the semiconductor hierarchy, this device belongs to the microcontroller family and operates as the central controller for a dedicated appliance, instrument, or control system. The MC9S08PA8VTG provides 8 KB of Flash, organized as 8K x 8, for firmware storage and 512 bytes of RAM for working data. Its 20 MHz operating frequency supports responsive control-loop execution, while a 16-bit timer provides a higher-resolution timing resource than an 8-bit timer. The device also integrates an ADC, analog comparator, EEPROM, and motor-control Flex Timer, reducing the number of external components required in measurement and motor-control systems. The S08PA family is positioned for compact embedded products that need more capability than a basic 8-bit control device without moving to a higher-cost 16- or 32-bit architecture. Integrated analog conversion and comparison can support sensor conditioning, threshold detection, and closed-loop control. Flash retains programmed firmware without power, while RAM supports stack, variables, and transient state during execution. The NXP manufacturer part page identifies the device as NRND, so engineers should account for product-change notices and planned migration when starting new production designs. Typical applications include compact automotive controls, industrial sensing modules, motor-control boards, appliance interfaces, and low-cost embedded instruments. The 16-pin TSSOP package can simplify board layouts where space is constrained, although exposed-pad thermal requirements and signal-routing discipline remain design considerations. The industrial temperature-grade marking supports designs intended for controlled industrial environments when the complete operating-temperature limits are confirmed during design verification. Before committing a layout, check the manufacturer datasheet for the exact pin assignments, power requirements, clocking options, and recommended decoupling network. Preserve the TSSOP land pattern and verify programming, reset, and debug access. Because the device is NRND, compare current lifecycle notices and qualify any replacement before transferring an approved production design. This product record combines the manufacturer lifecycle information, distributor package and memory details, cross-reference candidates, application guidance, and design considerations needed to evaluate the MC9S08PA8VTG for embedded control platforms.

RFQ Contact
MC9S08PA8VTJ - 8-Bit 20MHz S08 MCU | NXP | 20-TSSOP
MC9S08PA8VTJ

MC9S08PA8VTJ - 8-Bit 20MHz S08 MCU | NXP | 20-TSSOP

NXP Semiconductors MC9S08PA8VTJ is an 8-bit S08 microcontroller with a 20 MHz CPU, 8 KB of flash memory, integrated analog peripherals, and a 20-TSSOP package. It operates across a 2.7 V to 5.5 V supply range and supports industrial temperature operation from -40°C to 105°C. The device is listed by NXP as NRND, so engineers should confirm availability and lifecycle plans before starting a new production design. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one compact device. The S08 core places the MC9S08PA8VTJ in the 8-bit microcontroller category, where instruction efficiency, deterministic control behavior, and low system complexity are more important than the high processing throughput associated with 32-bit applications. This S08PA family combines an economical embedded-control platform with analog functions suited to sensing, monitoring, and actuator-control systems. The MC9S08PA8VTJ includes 8 KB of flash program memory, an EEPROM capability, an analog-to-digital converter, an analog comparator, and a motor-control Flex Timer. These resources allow a compact control board to acquire analog inputs, execute control algorithms, operate timers, and drive outputs without requiring several separate peripheral devices. Its 20 MHz bus operation provides a practical balance between responsiveness, power consumption, and code execution performance for cost-sensitive embedded products. The S08PA family uses established S08 processor architecture and reusable peripheral IP, which can simplify migration and tooling decisions within the NXP ecosystem. The 20-TSSOP package is intended for compact surface-mount assemblies and offers adequate pin access for power, clock, reset, programming, analog, and digital I/O functions. Engineers should assign pins by consulting the manufacturer pin-description table and account for programming and debug requirements in the PCB layout. Typical uses include industrial sensor interfaces, compact motor-control systems, building and appliance controls, low-cost instrumentation, and small embedded measurement equipment. The analog input and timer resources are particularly useful when a design must monitor changing physical signals while maintaining predictable timing. Compared with a larger MCU, the device offers a smaller 8-bit architecture and a simpler software ecosystem, but it provides less memory and processing capacity for connectivity-heavy or graphics-oriented products. Design attention should focus on decoupling, clock configuration, programming access, analog-reference integrity, and exposed-pin thermal limitations. Place input and output capacitors close to their associated pins, route sensitive analog signals away from fast-switching nodes, and use the manufacturer reference design as the basis for board-level implementation. This page combines lifecycle information, package details, technical positioning, application guidance, and replacement considerations for faster engineering evaluation. For sourcing, use the Request a Quote form on this page to request current availability, minimum order quantity, lead time, and package-specific pricing. Because the device is marked NRND, confirm whether an active family member better matches the production program or whether an exception approval is required for continued use.

RFQ Contact
MC9S08PA8VWJ - 8-Bit 20MHz 8KB Flash MCU | NXP
MC9S08PA8VWJ

MC9S08PA8VWJ - 8-Bit 20MHz 8KB Flash MCU | NXP

The NXP Semiconductors MC9S08PA8VWJ is an 8-bit S08 microcontroller with a 20 MHz maximum bus speed, 8 KB of flash memory, and a 20-pin SOIC package. Designed for cost-sensitive industrial and consumer equipment, the device combines an embedded 8-bit CPU with integrated timers, an ADC, EEPROM, analog comparators, and a motor-control FlexTimer. Its operating supply range is 2.7 V to 5.5 V, supporting both 3 V and 5 V systems. An 8-bit microcontroller is a compact embedded controller built around an 8-bit central processing unit, flash program memory, data memory, and dedicated peripheral modules. MC9S08PA8VWJ belongs to the S08 family of 8-bit microcontrollers and sits within the broader hierarchy of embedded processors, microcontrollers, and semiconductor devices. Its combination of an HCS08L core and integrated analog and timing resources is useful when a product requires local control without the cost or complexity of a higher-performance processor. Key features include up to 20 MHz operation, 8 KB of read, program, and erase flash, 8 KB of SRAM listed in distributor listings, and support for as many as 40 interrupt or reset sources. The integrated ADC supports cost-effective analog measurement, while the analog comparator and motor-control FlexTimer reduce the need for separate peripheral components. Four levels of nested interrupt support provide deterministic control for embedded tasks and real-time event handling. The device is specified for operation from 2.7 V to 5.5 V across a temperature range of -40 °C to 105 °C. This voltage and temperature coverage allows the same architecture to serve industrial controls, appliance controllers, sensor modules, compact motor-control boards, and consumer products. Its 20-pin SOIC package is also compatible with conventional surface-mount assembly and board-layout practices used for small embedded controllers. Typical applications include low-cost appliance control, industrial sensing, compact motor control, analog monitoring, and small consumer products. The integrated ADC is particularly useful when a design must measure an analog sensor input, while the FlexTimer and comparators support timing-sensitive and threshold-based functions. Software can also use the interrupt structure to coordinate multiple control events without requiring a separate programmable logic device. For a new design, confirm the exact peripheral assignment, pin multiplexing, programming method, and memory map against the manufacturer datasheet before assigning PCB functions. Decoupling and signal-integrity requirements should be planned around the power pins and any communication signals used by the product. The 20-pin footprint limits pin count, so applications requiring many external signals should begin with a complete pin-level feasibility review. This product page brings together the core device specifications, package information, sourcing guidance, practical application context, and drop-in alternatives for engineers evaluating an MC9S08PA8VWJ-based design. It supports faster initial screening while the manufacturer datasheet remains the controlling reference for detailed electrical limits, registers, timing, and board implementation.

RFQ Contact
MC9S08PB8MTG - 8-Bit 20MHz S08 MCU | NXP Semiconductors
MC9S08PB8MTG

MC9S08PB8MTG - 8-Bit 20MHz S08 MCU | NXP Semiconductors

NXP Semiconductors MC9S08PB8MTG is an 8-bit S08P-family microcontroller with a 20 MHz maximum clock, 8 KB of flash memory, 1 KB of RAM, and a 16-pin TSSOP package. It operates across a 2.7 V to 5.5 V supply range and provides 14 I/O pins, making it suitable for compact control systems that require more than basic digital I/O. An S08P microcontroller is an 8-bit embedded-control component combining a general-purpose processor core with flash program memory, data RAM, timers, serial interfaces, and analog peripherals. It belongs to the S08 MCU, embedded microcontroller, and embedded-processing hierarchies. These devices are commonly used for appliance controls, user interfaces, industrial products, and compact instrumentation where a 5 V-compatible architecture and deterministic embedded operation are valuable. The MC9S08PB8MTG integrates a 12-bit analog-to-digital converter, analog comparator, operational amplifier, I2C interface, and flexible timers. Its 20 MHz clock provides processing performance for control loops, signal sampling, communications, and human-interface tasks. The 8-bit architecture and 8 KB flash capacity are appropriate for firmware that coordinates sensors, actuators, communication links, and system supervision without requiring a higher-cost application processor. The S08P family reuses the established S08 core, intellectual property, and development tools, which can simplify migration between compatible 8-bit designs. Its 5 V operating environment and analog resources make the MC9S08PB8MTG particularly relevant to appliance controls and industrial user-interface equipment. The NXP product family also states compliance with the IEC 60730 appliance safety standard. Typical uses include appliance control panels, digital thermometers, environmental monitors, small motor controllers, sensor nodes, and industrial interface modules. Designers can use the ADC and analog comparator for direct sensor conditioning, the amplifier for low-level analog signals, the timers for periodic measurement or PWM functions, and I2C for connecting external sensors, EEPROMs, or display and interface controllers. PCB planning should preserve the exact TSSOP-16 footprint and provide adequate decoupling at the supply pins. Pay particular attention to analog-source grounding, exposed analog inputs, and the allocation of debug or programming signals. Because the target is an 8 KB flash MCU, firmware sizing and bootloader behavior should be reviewed before adding application features or field-upgrade capability. This product overview combines the NXP family characteristics with practical guidance for memory planning, analog interfacing, peripheral assignment, and supply decoupling. It also organizes package, lifecycle, comparison, and sourcing information so engineers can assess whether the MC9S08PB8MTG fits a compact embedded-control design before beginning board-level implementation.

RFQ Contact
MC9S08PB8MTJ - 20MHz 8-Bit 8KB Flash MCU | NXP
MC9S08PB8MTJ

MC9S08PB8MTJ - 20MHz 8-Bit 8KB Flash MCU | NXP

The NXP Semiconductors MC9S08PB8MTJ is an 8-bit S08 microcontroller with a 20 MHz operating frequency, 8 KB of flash program memory, and a 5 V supply architecture in a 20-pin TSSOP package. It belongs to the S08PB family, which combines a compact general-purpose microcontroller with integrated analog resources for cost-sensitive embedded control systems. An 8-bit microcontroller is a programmable semiconductor that executes firmware from embedded flash memory and controls sensors, actuators, communications interfaces, and digital logic. The MC9S08PB8MTJ uses the S08 architecture, placing a general-purpose CPU, memory, timers, serial interfaces, and analog peripherals within one device. Its 5 V operating focus makes it suitable for industrial, consumer, appliance, and portable equipment designs that use legacy-compatible 5 V signaling. Key features include 8 KB flash memory, an integrated 12-bit analog-to-digital converter, an analog comparator, an analog amplifier, I2C communication, and flexible timers. The 20 MHz CPU provides deterministic control for motor, power, and measurement functions, while the analog peripherals reduce the need for external discrete circuitry. NXP describes the S08PB family as scalable and pin-compatible, supporting migration across related S08 products while retaining the same core, intellectual property, and software tools. The device’s mixed-signal architecture is significant because sensor inputs can be digitized without a separate ADC, threshold decisions can be handled by the comparator, and small analog signals can be conditioned by the amplifier. I2C enables connection to sensors, EEPROMs, display controllers, and other serial peripherals, while the timer resources support periodic measurement, timing, pulse generation, and motor-control functions. The S08 core and established toolchain also reduce firmware migration effort for existing S08 designs. Typical applications include consumer appliance control, industrial sensing, power-system monitoring, temperature measurement, small motor control, energy metering, and compact embedded control panels. Its 20-pin TSSOP package supports conventional surface-mount assembly, while 8 KB of flash supports compact firmware, state-machine logic, calibration tables, and application-specific communication routines. The integrated analog features are particularly useful where board area and component count are important constraints. When laying out the circuit, place decoupling capacitance at the supply pins and route analog inputs away from switching nodes and high-current return paths. Confirm the required external crystal, clock, reset, and programming connections against the NXP datasheet before finalizing the PCB. Use the device’s 5 V analog and digital design limits when selecting external sensor and interface components. This product page combines manufacturer specifications, package information, application guidance, design checks, and replacement guidance in a format designed to help engineers evaluate the MC9S08PB8MTJ before schematic capture, PCB layout, firmware development, and sourcing.

RFQ Contact
MC9S08PB8VTG - 20MHz 8-Bit Flash MCU | NXP
MC9S08PB8VTG

MC9S08PB8VTG - 20MHz 8-Bit Flash MCU | NXP

The NXP Semiconductors MC9S08PB8VTG is an 8-bit S08P-series microcontroller with a 20 MHz operating frequency, 8 KB of embedded Flash memory, and a 16-TSSOP package. Designed for 5 V applications, it combines an S08 core with integrated analog resources, including a 12-bit ADC, analog comparator, and amplifier, while also supporting I2C communication and flexible timers. The combination of embedded Flash, mixed-signal peripherals, and a compact surface-mount package makes the device suitable for compact control systems that require more than basic digital I/O. An 8-bit microcontroller is a programmable semiconductor containing a processor core, memory, and peripherals on one integrated circuit. MCUs are used to implement control logic in products such as industrial controls, household appliances, sensor nodes, and automotive accessories. Within the device hierarchy, the MC9S08PB8VTG belongs to the S08P family of 8-bit microcontrollers and shares the S08 core, reusable peripheral IP, and software ecosystem described by NXP for simplified migration within the family. The most prominent device characteristics are its 20 MHz maximum clock frequency, 8 KB of Flash program memory, and 16-pin TSSOP construction. Its 12-bit ADC provides more resolution than an 8-bit converter, making the MCU useful for monitoring analog sensor signals with comparatively fine quantization. The integrated comparator and amplifier support thresholding, signal conditioning, and local analog measurements without requiring separate components in every design. NXP describes the S08PB family as a scalable, pin-compatible MCU family that reuses the existing S08 core, IP, and tools. That compatibility can simplify firmware and hardware migration when a design moves between qualified S08P devices with similar package options. The device also emphasizes EFT and ESD performance, useful in applications where electrical transients and electrostatic discharge are relevant design concerns. Typical applications include industrial sensor controllers, building and access-control modules, small appliance controls, metering systems, battery-operated sensor nodes, and compact embedded products. A design can use the ADC for analog inputs, the comparator for threshold decisions, the amplifier for conditioning weak signals, and the timers for periodic measurement or actuator timing. The 5 V operating target also suits systems that operate from regulated 5 V rails. PCB planning should prioritize clean analog routing around the ADC, comparator, and amplifier pins, while keeping switching supplies and high-current outputs away from sensitive measurement traces. Follow the NXP datasheet pin-description table for the exact 16-TSSOP assignments, exposed features, decoupling requirements, and recommended application circuit before laying out the board. This product page combines the exact catalog characteristics of the MC9S08PB8VTG with application guidance, migration considerations, design cautions, and structured comparisons. It is intended to help engineers evaluate whether the MCU's Flash capacity, analog integration, clock speed, and package match the requirements of a new embedded design.

RFQ Contact
MC9S08PB8VTJ - 8-Bit 20MHz 8KB MCU | NXP | Automotive
MC9S08PB8VTJ

MC9S08PB8VTJ - 8-Bit 20MHz 8KB MCU | NXP | Automotive

The NXP Semiconductors MC9S08PB8VTJ is an active 8-bit S08 microcontroller rated for 20 MHz operation and supplied in a 20-pin TSSOP package. The device includes 8 KB of flash memory organized as 8K × 8, operates from a 3.3 V or 5 V supply according to the product listing, and combines an integrated LIN transceiver with enhanced timer functions for automotive body-electronics designs. Its analog feature set includes a 12-bit ADC, analog comparator, amplifier, I²C interface, and flexible timers. An 8-bit microcontroller is a compact embedded-control device containing a processor core, nonvolatile program memory, data memory, and peripherals on one integrated circuit. In the hierarchy of semiconductor components, the MC9S08PB8VTJ is an embedded microcontroller, a specialized form of microprocessor integrated with memory and peripherals. Its integrated analog and communications resources can reduce the number of discrete components required in a body-control, sensing, or LIN-connected subsystem. The primary characteristics of the MC9S08PB8VTJ include its 20 MHz operating speed, 8 KB flash capacity, 12-bit ADC, integrated analog comparator and amplifier, I²C communication, flexible timers, and integrated LIN transceiver. These functions make the device suitable for designs that require moderate processing performance without requiring a 16- or 32-bit processor. The flash memory provides a nonvolatile location for firmware, while the analog peripherals support signal acquisition and threshold-based control functions. The S08PB device family combines an 8-bit embedded platform with mixed-signal and vehicle-network connectivity. The 20-pin TSSOP package supports compact, surface-mount PCB layouts, while the 3.3 V and 5 V operating options provide flexibility across 5 V-dominant and lower-voltage system architectures. Exact ADC accuracy, RAM capacity, timer channel details, and electrical limits must be confirmed from the manufacturer datasheet before a production design is released. Typical applications include LIN-connected automotive body modules, sensor interfaces, actuator controllers, simple environmental monitoring, and compact industrial control products. The integrated LIN transceiver is particularly useful when a design must communicate over a vehicle-network bus, while the ADC and analog comparator allow the MCU to process external sensor signals without requiring separate interface components. Designers should reserve decoupling close to the supply pins, route analog inputs away from fast-switching nodes, and confirm unused-pin handling in the manufacturer datasheet. Firmware development must also account for the S08 architecture, peripheral register map, and device-specific errata. PCB and firmware assumptions should be validated with the exact MC9S08PB8VTJ ordering information and current NXP documentation. This page organizes the known electrical identity, package information, application fit, and engineering selection considerations for the MC9S08PB8VTJ. It also distinguishes confirmed product attributes from parameters that require direct review of the NXP datasheet, helping engineers plan evaluation without relying on assumptions about flash size, analog performance, pin mapping, or peripheral limits.

RFQ Contact
MC9S08PL32CLC - 8-Bit 20MHz 32KB Flash MCU | NXP 32-LQFP
MC9S08PL32CLC

MC9S08PL32CLC - 8-Bit 20MHz 32KB Flash MCU | NXP 32-LQFP

The NXP MC9S08PL32CLC is an 8-bit S08 microcontroller featuring an HCS08L core running at 20 MHz, 32 KB of embedded Flash program memory and 256 B of EEPROM, housed in a 32-pin LQFP (7x7 mm) package. It is part of the cost-effective, 5 V S08PL family targeted at appliances, motor control and consumer industrial designs. An 8-bit microcontroller (MCU) is a small, single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a set of peripherals such as timers, ADC and communication interfaces on one die. The S08 family sits in the 8-bit MCU hierarchy below 32-bit Cortex-M parts but above simple hardware controllers: S08 -> HCS08 core -> 8-bit MCU -> microcontroller -> embedded controller -> semiconductor. The S08PL line in particular emphasises 5 V I/O tolerance, integrated EEPROM and strong EFT/ESD performance for harsh environments. Key features include 4 KB SRAM, a 10-bit ADC with multiple channels, an analog comparator, flexible timers (including TPM and PWT), and a 20 MHz bus clock derived from an internal clock source. The MCU operates from 2.7 V to 5.5 V and supports industrial-grade ambient temperatures. The 32-LQFP footprint exposes up to 28 general-purpose I/O pins and integrates an SCI/UART plus SPI and I2C communication channels. The S08 architecture uses a von-Neumann bus with an HCS08 enhanced instruction set, including multiply and divide, and a BDM (Background Debug Mode) interface for in-circuit programming and debug. Internal EEPROM emulates data-logging or user-configuration storage without external serial memory, and the 10-bit ADC supports both scan and single conversion modes. Typical applications include white-goods and small home appliances, low-end motor control (BLDC, PMSM, brushed DC), lighting controls, user-interface boards, and battery-operated 5 V industrial sensors. The 5 V tolerance makes it a clean replacement for legacy 5 V designs that need extra Flash headroom. When designing, route the VDDA/VSS analog pair separately from the digital supply to preserve ADC accuracy, and follow NXP's S08PL reference manual for layout. The internal EEPROM is rated for a finite endurance; structure writes carefully to avoid premature wear. This page synthesises distributor pricing, drop-in NXP S08PL/S08PA family alternatives and practical design notes not collected on a single OEM page.

RFQ Contact
MC9S08PL32CLF - 8-Bit 20MHz 32KB MCU | NXP | 48-LQFP
MC9S08PL32CLF

MC9S08PL32CLF - 8-Bit 20MHz 32KB MCU | NXP | 48-LQFP

The NXP Semiconductors MC9S08PL32CLF is an 8-bit S08 microcontroller operating at up to 20 MHz, with 32 KB of flash memory and a 48-LQFP 7x7 mm package. It is designed for embedded control applications requiring a compact 8-bit MCU, integrated LCD-oriented connectivity, and low-power operation. A microcontroller is a programmable integrated circuit containing a processor core, memory, peripherals, and input/output interfaces. The S08 MCU family belongs to the embedded-controller hierarchy: 8-bit microcontroller -> S08 embedded controller -> semiconductor. This part is intended to consolidate local control, display interaction, sensing inputs, and communication functions into one low-power device. Verified distributor data identifies the device as an S08 microcontroller with 8-bit architecture, 20 MHz maximum frequency, 32 KB flash memory organized as 32K x 8, and a 48-LQFP 7x7 mm package. The flash memory provides a practical firmware storage region for embedded products. The exact RAM size, supply voltage range, pin assignments, temperature limits, and peripheral details require confirmation from the manufacturer datasheet. The part designation indicates an S08PL32-series device and an LF package suffix, but package temperature, lead-free status, and lifecycle classification are not confirmed in the supplied data. The manufacturer’s current status should therefore be checked before committing to new production. Rochester Electronics and DigiKey listings indicate that this exact part is available through distribution channels, while an official Freescale/NXP datasheet link was not included in the retrieved results. Typical uses include keypad and user-interface controllers, small industrial control panels, sensor-conditioning nodes, and low-power embedded instruments where an LCD driver and touch-oriented S08 peripherals are useful. Because the available verified data does not include the complete electrical and pinout tables, a production design should verify all connections, decoupling, programming, and timing requirements against the authoritative datasheet before PCB release. For layout, place the required decoupling capacitors close to the supply pins and preserve the package’s exposed thermal and routing requirements. Confirm programming, reset, clock, LCD, and I/O multiplexing in the datasheet rather than inferring them from the family name. The MC9S08PL32CLF is best evaluated for new designs when the 8-bit S08 software ecosystem and 20 MHz performance fit the system requirements. This page summarizes verified distributor specifications, separates confirmed data from missing technical fields, and provides sourcing and engineering guidance without inventing datasheet values or a pinout.

RFQ Contact
MC9S08PL4CSC - 8-Bit 20MHz 4KB Flash MCU | NXP
MC9S08PL4CSC

MC9S08PL4CSC - 8-Bit 20MHz 4KB Flash MCU | NXP

The NXP Semiconductors MC9S08PL4CSC is an 8-bit S08PL microcontroller with a 20 MHz bus, 4 KB of Flash memory, and an 8-pin SOIC package. It operates across a 2.7 V to 5.5 V supply range and supports up to 40 interrupt and reset sources with up to four levels of nested interrupt handling. An S08 microcontroller is a compact embedded-control device that combines a central processing unit, program memory, data memory, peripherals, and communication interfaces on one integrated circuit. The S08PL family is positioned as a cost-effective 5 V platform for simple control systems. Its combination of Flash memory, EEPROM, a 10-bit analog-to-digital converter, an analog comparator, and flexible timers allows designers to consolidate functions that otherwise require several discrete components. The MC9S08PL4CSC supports bus operation up to 20 MHz throughout the stated 2.7 V to 5.5 V range. Its 4 KB Flash capacity is suited to compact control code, while integrated EEPROM supports parameter retention. The 10-bit ADC enables analog measurement, and the analog comparator supports threshold-based decisions without requiring a separate comparator. Flexible timers are useful for periodic events, timing, and basic motor or actuator-control functions. The device is based on the S08 central processing unit and uses interrupt-driven control to coordinate peripheral activity. Supporting as many as 40 interrupt and reset sources and four nested interrupt levels improves handling of simultaneous internal and external events. The family also emphasizes strong EFT and ESD performance, which is important in cost-sensitive industrial and consumer equipment exposed to electrically noisy environments. Typical uses include small sensor controllers, appliance-control modules, LED and lighting controls, motor-control subsystems, keypad interfaces, compact power-conversion controllers, and simple industrial automation nodes. The 8-pin package is particularly useful where PCB area is constrained but the design needs more than a basic logic controller. When designing around the MC9S08PL4CSC, reserve the eight pins for power, ground, reset, programming, clock, and I/O according to the manufacturer pin-description table. Keep analog and digital return paths controlled, provide the required decoupling close to the supply pins, and confirm all peripheral assignments against the device's pin multiplexing options before finalizing the PCB. This page organizes the manufacturer specifications, sourcing guidance, verified drop-in alternatives, application fit, package details, and practical design considerations into one engineering-focused reference for compact 8-bit control-system designs.

RFQ Contact
MC9S08PL4CTG - 8-bit S08 MCU, 4KB Flash, 20MHz | NXP
MC9S08PL4CTG

MC9S08PL4CTG - 8-bit S08 MCU, 4KB Flash, 20MHz | NXP

The NXP Semiconductors MC9S08PL4CTG is an 8-bit S08 microcontroller with a 20 MHz internal bus, 4 KB of embedded flash memory and 512 bytes of RAM, packaged in a 16-pin TSSOP (DIP-style) surface-mount package. It is designed for cost-sensitive embedded control and is supported from a 2.7 V to 5.5 V supply across a -40 °C to +85 °C temperature range, making it equally suited to industrial control boards and battery-fed portable consumer products. A microcontroller is a programmable system-on-chip that integrates a CPU core, non-volatile program memory, data memory, and peripherals such as analog converters, timers, and communication interfaces onto one die. The S08 family from NXP is a cost-oriented 8-bit architecture built around a simple, highly deterministic instruction set, an on-chip bus with programmable clock prescalers, and a rich interrupt controller, which maps into the broader hierarchy of embedded processor, microcontroller, and semiconductor product categories. Key features of the MC9S08PL4CTG include on-chip EEPROM for parameter storage, a 10-bit analog-to-digital converter, an analog comparator, flexible timer modules for periodic and PWM generation, and support for up to 40 interrupt and reset sources with four levels of nested interrupt handling. The 20 MHz bus speed gives adequate headroom for protocol handling, sensor sampling, and simple motor or relay control, while the low-power design targets portable and industrial-control applications. Architecturally, the device separates an 8-bit S08 central processor unit with a 16-bit timer capability from dedicated peripheral subsystems. The on-chip EEPROM removes the need for an external non-volatile memory device for calibration data or serial numbers, while the 10-bit ADC with analog comparator supports direct sensing of thermistors, potentiometers, and battery rails without external signal conditioning. Typical applications include low-cost consumer remote controls, small appliance controllers, battery-operated sensors, motor and valve control modules, LED driver boards, and compact industrial sensing nodes where a 16-pin footprint and 5 V or 3.3 V operation are hard requirements. A key design consideration is that the S08PL family is a small-memory platform: 4 KB of flash limits application code size, so time-critical or code-heavy designs should be evaluated against the larger MC9S08QE family in the same 16-TSSOP footprint. Budget for external flash only if the pin count allows it. This page consolidates manufacturer specifications, package and pinout references, drop-in alternatives in the same footprint, and practical layout and firmware guidance that are not gathered in a single place in the original MC9S08PL4 series datasheet.

RFQ Contact
MC9S08PL4CTJ - 20MHz 8-Bit S08 MCU, 4KB Flash | NXP
MC9S08PL4CTJ

MC9S08PL4CTJ - 20MHz 8-Bit S08 MCU, 4KB Flash | NXP

The NXP Semiconductors MC9S08PL4CTJ is an 8-bit S08 microcontroller with a 20 MHz bus, 4 KB Flash memory, and 512 bytes of RAM in a 20-TSSOP package. It operates across a 2.7 V to 5.5 V supply range at temperatures from -40°C to +85°C, making it suitable for cost-sensitive automotive and industrial control designs. Integrated EEPROM, a 10-bit ADC, an analog comparator, and flexible timers support compact embedded-control designs. An 8-bit microcontroller is a compact embedded-processing IC designed to execute embedded software, read sensor inputs, control outputs, and manage communication and timing functions. The S08 central processor unit belongs to the broader hierarchy of 8-bit MCU, embedded processor, microcontroller, and semiconductor categories. It provides a straightforward architecture for cost-sensitive products where low system complexity, deterministic control, and analog integration matter more than high computational throughput. Key features include operation up to 20 MHz, 4 KB of Flash for program storage, 512 bytes of SRAM for working data, and an integrated EEPROM capability. The device also provides a 10-bit analog-to-digital converter, an analog comparator, flexible timers, and support for as many as 40 interrupt or reset sources. Four-level nested interrupt capability helps prioritize time-critical events in motor-control, sensing, and general-purpose control systems. The MC9S08PL4CTJ combines the 8-bit S08 CPU with analog and timing resources on a single device. Its 2.7 V to 5.5 V operating range supports 3.3 V and 5 V systems, while the -40°C to +85°C range covers industrial-temperature environments and extended ambient conditions. The 20-TSSOP package provides a compact surface-mount option for applications requiring modest pin count and low board area. Typical applications include small brushless DC motor controllers, appliance controls, automotive accessory modules, industrial sensor interfaces, compact power-control boards, and low-cost consumer products. The 10-bit ADC supports analog measurement, the comparator supports threshold or simple waveform decisions, and the timers help generate accurate timing sequences without requiring a separate timing IC. Designers should preserve the voltage and temperature limits, provide the decoupling and programming connections required by the S08PL4 family, and confirm pin-level functions against the manufacturer pin description table before routing the PCB. A 20 MHz operating point also requires clock and power-supply layouts that limit noise and timing uncertainty, particularly when analog measurements and motor-control signals share the board. This page combines the manufacturer specifications, package information, sourcing guidance, design considerations, and the available family-level replacement path in a format that helps engineers evaluate MC9S08PL4CTJ for embedded motor-control and analog-sensing designs.

RFQ Contact
MC9S08PL60CLD - 8-Bit 20MHz 60KB Flash MCU | NXP
MC9S08PL60CLD

MC9S08PL60CLD - 8-Bit 20MHz 60KB Flash MCU | NXP

The NXP Semiconductors MC9S08PL60CLD is an 8-bit S08P microcontroller with a 20 MHz operating frequency, 60 KB of Flash program memory, and a 44-LQFP package measuring 10 mm by 10 mm. The device combines an HCS08L-series S08 core with integrated EEPROM, a 10-bit analog-to-digital converter, an analog comparator, and flexible timers. It is designed for compact control systems that require deterministic embedded processing, mixed-signal measurement, and economical external storage. An 8-bit microcontroller is a semiconductor device whose CPU and peripherals are optimized for embedded control, measurement, and simple digital logic. Within the broader hierarchy, the MC9S08PL60CLD is an MCU, a microcontroller, and a member of the HCS08 family of 8-bit embedded processors. Its compact instruction-oriented architecture, dedicated peripherals, and mixed-signal resources make it suitable for appliance control, industrial interfaces, sensing modules, and low-cost automation products. The principal characteristics include 60 KB of Flash memory organized as 60K by 8 bits, a maximum clock frequency of 20 MHz, and operation from a 5 V supply as described for the S08P family. Integrated EEPROM preserves calibration or configuration data without consuming Flash program space. The 10-bit ADC and analog comparator support sensor interfaces, while flexible timers help implement periodic sampling, motor or valve control, and industrial timing functions. NXP describes the S08P portfolio as a scalable and pin-compatible MCU family that reuses the existing S08 core, intellectual property, and development tools. This ecosystem continuity reduces the engineering effort required to migrate designs between suitable family members. The MC9S08PL60CLD is therefore useful when a controller needs a modest Flash capacity, low-complexity logic, analog measurement, and an established 8-bit software toolchain rather than a high-performance 32-bit application processor. Typical applications include industrial control panels, motor and actuator controllers, building equipment, consumer appliances, sensor nodes, and compact embedded systems. The 20 MHz CPU supports responsive foreground and background tasks, while the ADC and comparator reduce the need for external signal-conditioning components in straightforward measurement designs. Timers can provide deterministic service intervals for communications, debouncing, pulse generation, or motor-control functions. Designers should select capacitors, clock components, programming connections, and interface protection to match the voltage and timing requirements in the MC9S08PL60 Series Data Sheet. Because firmware, reset behavior, clock configuration, and peripheral assignments are application-specific, validate the complete pin, voltage, and timing configuration against the manufacturer datasheet before releasing PCB artwork or production firmware. This product overview consolidates the core identity, memory capacity, clock speed, package, analog resources, lifecycle status, and procurement information for MC9S08PL60CLD. It also provides application guidance, design checks, and a disciplined comparison framework for engineers evaluating MCU upgrades, second-source decisions, and board-level alternatives.

RFQ Contact
MC9S08PL60CLH - 20MHz 8-Bit 60KB Flash MCU | NXP
MC9S08PL60CLH

MC9S08PL60CLH - 20MHz 8-Bit 60KB Flash MCU | NXP

The NXP Semiconductors MC9S08PL60CLH is an 8-bit S08 microcontroller with a 20 MHz bus, 60 KB of flash memory, and a 64-pin LQFP package measuring 10 mm by 10 mm. It operates from 2.7 V to 5.5 V across the stated temperature range and is positioned for embedded control systems requiring broad connectivity and deterministic 8-bit processing. A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one component. The S08 architecture belongs to the embedded microcontroller hierarchy, where firmware executes control logic for motors, sensors, communications, human-interface functions, and industrial equipment. The MC9S08PL60CLH provides 60 Kbytes of flash for firmware storage and is identified as an S08 S08 microcontroller IC with 64 pins. The supplied manufacturer-related listing identifies the device as an 8-bit, 20 MHz part with 60 KB, or 60 K × 8 bits, of flash memory. Its 2.7 V to 5.5 V operating range supports both lower-voltage and 5 V system designs, while the 64-LQFP package provides a relatively high pin count for external peripheral connections. The package is identified as 10 mm by 10 mm in distributor and technical listings. Typical design use includes embedded control nodes, sensor conditioning, actuator control, communications gateways, and compact industrial modules. The 20 MHz bus can improve responsiveness for interrupt-driven and event-based firmware compared with slower general-purpose 8-bit controllers, but final timing must be validated against the operating voltage, peripheral configuration, and clock settings in the manufacturer datasheet. A key engineering consideration is power and signal integrity. Decoupling, exposed-pad or thermal management requirements, unused-pin handling, and the exact 64-pin assignment should be taken directly from the MC9S08PL60 datasheet. Do not infer pin functions or peripheral availability from distributor summaries alone. This page combines verified manufacturer and distributor information, structured availability context, application guidance, and source-linked engineering notes. Because the provided data does not include numeric pricing, complete pin assignments, detailed electrical limits, or validated substitute parameters, those fields remain explicitly marked for data completion rather than being guessed.

RFQ Contact
MC9S08PL8CLC - 8-Bit 20MHz MCU with 8KB Flash | NXP
MC9S08PL8CLC

MC9S08PL8CLC - 8-Bit 20MHz MCU with 8KB Flash | NXP

The NXP Semiconductors MC9S08PL8CLC is an 8-bit S08 microcontroller with a 20 MHz maximum clock frequency, 8 KB flash memory, 256 bytes of RAM, a 10-bit ADC, an analog comparator, and flexible timers, housed in a 32-LQFP 7 x 7 mm package. Its 2.7 V to 5.5 V operating supply range supports cost-sensitive industrial, appliance, and user-interface designs. An S08 microcontroller is a compact embedded-control device in the 8-bit microcontroller hierarchy. It combines a CPU core, flash program memory, RAM, peripherals, and general-purpose input/output pins on one integrated circuit. The MC9S08PL8CLC uses the economical HCS08/S08 architecture and is positioned for applications that require deterministic control, analog measurement, EEPROM integration, and modest processing performance without a higher-cost 32-bit MCU. Key device features include 8 KB of flash, 256 bytes of RAM, a 10-bit analog-to-digital converter, an analog comparator, a 16-bit timer, keyboard interrupt capability, and up to 30 I/O pins. Its 20 MHz clock supports faster control-loop execution than lower-frequency 8-bit designs. The 2.7 V to 5.5 V supply range permits integration with 3.3 V and 5 V system rails, although the external circuitry must respect each connected peripheral's voltage limits. The S08P family combines the established S08 core and peripheral set with features intended to simplify cost-sensitive embedded systems. NXP describes the family as scalable and pin-compatible, supporting migration within the product family. Embedded EEPROM provides nonvolatile parameter storage, while the ADC and analog comparator reduce the need for external sensing components in simple measurement, threshold, or control functions. Typical uses include appliance controllers, keypad interfaces, industrial control modules, simple motor or relay controls, instrumentation, and compact user-interface panels. The 30 I/O count is particularly useful when a design must combine digital inputs, outputs, and analog sensing without adding a separate interface IC. The 7 x 7 mm LQFP also provides a practical option for automated assembly and inspection compared with smaller packages that can be difficult to handle in lower-volume production. When designing around the MC9S08PL8CLC, verify the complete pin assignment and peripheral multiplexing in the manufacturer datasheet before assigning analog, timer, debug, or communication functions. Provide the required clock, reset, decoupling, and programming-interface components, and do not assume that every adjacent 5 V-compatible I/O can safely tolerate a 5.5 V input. Check the package pin count, exposed thermal behavior, and reflow profile during PCB qualification. This page consolidates the manufacturer's device positioning, distributor package details, memory and analog specifications, application guidance, and strict drop-in-replacement screening. It also identifies where a board-level substitution must be validated against pin multiplexing, timing, memory capacity, voltage, and qualification requirements rather than package dimensions alone.

RFQ Contact