Products (22,000+)

MC9S12C128MPBE - 16-Bit 25MHz HCS12 MCU, 128KB Flash | NXP
MC9S12C128MPBE

MC9S12C128MPBE - 16-Bit 25MHz HCS12 MCU, 128KB Flash | NXP

The NXP Semiconductors MC9S12C128MPBE is a 16-bit HCS12 microcontroller with 128KB of on-chip Flash and a 25MHz CPU12 core, housed in a 52-pin LQFP (10x10 mm) package. It is part of the S12C family, which delivers the 16-bit HCS12 core in a cost- and space-optimized footprint aimed at cost-sensitive general-purpose industrial and automotive network applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a set of peripherals such as timers, ADCs, communication controllers, and GPIO. MCUs occupy the middle layer of the embedded system hierarchy: transistor -> logic gate -> processor core -> MCU -> embedded system -> end product. The HCS12 (CPU12) family is NXP's 16-bit successor to the HC11 and is widely used where 8-bit MCUs run out of performance but full 32-bit ARM Cortex-M parts are over-specified. Key features include 128KB Flash, 4KB RAM, 25MHz bus speed, an enhanced capture timer, an 8-channel 10-bit ADC, multiple serial interfaces (SCI, SPI, I2C), and a controller area network (CAN) module. The 52-LQFP package exposes 40+ GPIO and supports automotive temperature grade operation. The integrated background debug mode (BDM) and on-chip voltage regulator simplify in-circuit programming and single-supply operation from 5V. Architecturally, the S12C combines a 16-bit register-rich CPU12 core with a unified Flash controller, a multi-master bus, and a peripheral bridge. The device targets body electronics, instrument clusters, HVAC controllers, and CAN-node end points. Its instruction set is upward-compatible with the HC11, easing firmware migration from legacy 8-bit designs. Typical applications include automotive body controllers (door modules, seat controllers, mirror adjusters), industrial CAN nodes, HVAC control boards, simple instrument clusters, and 16-bit replacement for legacy HC11 designs. The wide operating temperature range and on-chip CAN make it well suited to in-vehicle networks. When designing with the MC9S12C128MPBE, ensure the 5V supply is decoupled close to the VDD pins, the BDM header is brought out for in-circuit debug, and the oscillator load capacitors match the crystal datasheet. Plan Flash endurance (typically 10k cycles) for any EEPROM emulation scheme. This page synthesizes distributor pricing, drop-in S12C-family alternatives, and practical design notes not consolidated on the manufacturer datasheet.

RFQ Contact
MC9S12C128VFAE - 16-Bit HCS12 MCU, 128KB Flash, 25MHz, 48-LQFP | NXP
MC9S12C128VFAE

MC9S12C128VFAE - 16-Bit HCS12 MCU, 128KB Flash, 25MHz, 48-LQFP | NXP

The NXP MC9S12C128VFAE is a 16-bit HCS12 CISC microcontroller featuring 128KB (128K x 8) of embedded Flash program memory, 4KB of RAM, and 31 general-purpose I/O lines, housed in a 48-pin LQFP (7x7 mm) package. It operates from a 2.5V/5V supply, runs at up to 25MHz bus speed, and integrates an internal oscillator, making it well suited for cost- and space-sensitive industrial and automotive network applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O. The HCS12 family is a 16-bit CISC architecture introduced by Motorola and continued by Freescale (now NXP) that delivers higher code density than typical 8-bit cores while retaining the deterministic interrupt behavior expected in embedded control. Within NXP's portfolio the HCS12C sub-family targets general-purpose applications where the rich peripheral set and 16-bit data paths deliver more headroom than legacy HC08/HCS08 designs without the cost of higher-tier DSP or Power-Architecture parts. Key features of the MC9S12C128VFAE include 128KB of on-chip Flash, an HCS12 CPU core with background debug mode (BDM), an internal oscillator eliminating the need for an external crystal in many designs, and a peripheral set covering CAN, SCI (UART), SPI, PWM, a watchdog timer, and power-on reset. The device supports both 2.5V and 5V operation, easing migration from 5V HC11/HC12 designs and supporting modern 3.3V peripheral rails. The 48-LQFP (7x7 mm) package exposes 31 I/O and the full address/data bus for external memory expansion when needed. Architecturally the HCS12C integrates the CPU12 core, a System Integration Module (SIM) for clock, reset, and interrupt control, a 128KB Flash module, 4KB RAM, and analog/digital peripherals onto a single die. Bus speed of 25MHz provides approximately 8-10 MIPS of effective throughput at the 16-bit datapath, which is ample for sensor interfacing, simple protocol stacks, and small RTOS workloads. Typical applications include industrial CAN nodes, automotive body and chassis ECUs, sensor signal conditioning, low-cost motor control, metering, HVAC controllers, and general-purpose 16-bit embedded platforms. The integrated CAN controller is particularly valuable in-vehicle and factory-floor networks. Engineers also use this part as a pin-compatible upgrade path from older HC12 Flash parts when more program memory is required. When designing with this part, confirm that your BDM/debug toolchain supports the HCS12 family and that the chosen C compiler has a matching startup file for the C128 derivative. Decoupling must follow NXP's reference design - one 100nF per VDD pin plus a 4.7uF bulk capacitor - and unused I/O should be configured as outputs or pulled to a defined state to minimize Icc. This page synthesizes distributor stock, real-time pricing, drop-in same-family alternatives, and practical HCS12 design notes - information that goes beyond the manufacturer datasheet alone.

RFQ Contact
MC9S12C32CFUE25 - 16-bit 25MHz HCS12 MCU, 32KB Flash | NXP
MC9S12C32CFUE25

MC9S12C32CFUE25 - 16-bit 25MHz HCS12 MCU, 32KB Flash | NXP

The NXP MC9S12C32CFUE25 is a 16-bit HCS12 microcontroller running at 25 MHz with 32 KB of on-chip Flash and 2 KB RAM, housed in an 80-pin PQFP (QFP-80) package. Part of NXP's S12C family of flash-based MCUs, it combines the CPU12 core's deterministic performance with a rich peripheral set, including a 10-bit ADC, PWM, SCI/SPI, CAN (msCAN) interface, and on-chip bandgap voltage regulator supporting 2.97V to 5.5V external supply. An HCS12 microcontroller is a 16-bit automotive-grade MCU based on the CPU12 core, designed for cost- and space-sensitive general-purpose industrial and automotive network applications. The S12C family is part of the broader 48/52/80-pin flash-based MCU portfolio from NXP, sitting beneath S12XS and S12XE in flash density but above HC908 in computational throughput. Its use on chip-to-chip bridging between analog/digital sensors and CAN/LIN vehicle networks makes it a workhorse of body electronics. Key features include 32 KB Flash program memory, 2 KB RAM, 1 KB EEPROM emulation area, integrated CAN 2.0A/B controller (msCAN), two SCI, two SPI, an 8-channel 10-bit ADC, an 8-channel 8-bit PWM, and up to 60 general-purpose I/O. The on-chip PLL multiplies an external 4 MHz crystal or resonator to internal 25 MHz bus speed, while the internal voltage regulator (Vreg) generates the core 2.5V from the 3V-5.5V external supply. Package marking "CFUE" denotes the 80-pin PQFP; "25" indicates the 25 MHz maximum bus frequency. Architecturally, the HCS12 core uses a 16-bit ALU with a 20-bit program counter addressing up to 1 MB of linear memory. The device supports BDM (Background Debug Mode) for non-intrusive in-circuit debugging, single-wire BDM programming from S01, and a security mechanism that prevents unauthorized Flash readout. The wide 3V-5.5V supply range and 0.5 mA typical run-mode current allow direct connection to automotive 5V buses without external regulators, while the integrated CAN module provides hardware message filtering for automotive network loads. Typical applications include automotive body controllers, HVAC control modules, instrument cluster slaves, door/window/seat modules, industrial CAN nodes, sensor interface boards, and general-purpose 5V automotive node ECU replacements. Designers choose this MCU when they need 16-bit deterministic performance, on-chip CAN, and a flash-based memory subsystem for in-field firmware updates over CAN (UDS) or BDM. When designing with this device, ensure the external 5V supply includes adequate decoupling (100 nF plus 4.7 uF bulk within 10 mm of each VDD/VSS pair). The device's NRND lifecycle status means new designs should evaluate the S12GC or S12XS families for long-term availability, but the existing tooling and reference designs are mature and stable. This page synthesizes distributor stock levels, drop-in same-package alternatives from the S12 family, and practical design notes for automotive and industrial 5V bus applications that are not aggregated on the manufacturer product page.

RFQ Contact
MC9S12C32CPBE25 - HCS12 16-bit MCU 32KB Flash 25MHz | NXP
MC9S12C32CPBE25

MC9S12C32CPBE25 - HCS12 16-bit MCU 32KB Flash 25MHz | NXP

The NXP MC9S12C32CPBE25 is a 16-bit HCS12 CISC microcontroller with 32KB of on-chip Flash, 2KB of RAM, and 25 MHz CPU clock, housed in a 52-pin LQFP (10x10 mm) package. It belongs to NXP's S12C "Goldfish" family of flash-based microcontrollers that deliver 16-bit performance for general-purpose industrial and automotive network applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), timers, communication peripherals, and I/O ports on one silicon die. Within the broader taxonomy, MCUs belong to embedded processors, which sit alongside microprocessors, DSPs, and SoCs in the semiconductor hierarchy. The HCS12 core is a 16-bit CISC architecture originally derived from the Motorola HC12, widely deployed in automotive body electronics and industrial control. Key features of the MC9S12C32CPBE25 include 32KB (32K x 8) of Flash program memory, an integrated bandgap-based on-chip voltage regulator (Vreg) accepting 2.97 V to 5.5 V external supply, a Phase-Lock-Loop (PLL) circuit for flexible bus-speed configuration, multiple timers including a 16-bit Pulse-Width Modulation (PWM) module, an 8-channel 10-bit Analog-to-Digital Converter (ADC), CAN (Controller Area Network) and SCI/SPI serial interfaces, and up to 60 general-purpose I/O pins depending on package variant. The 16-bit HCS12 core delivers high code density for embedded C applications while maintaining low power consumption suitable for always-on industrial nodes. The S12C architecture uses a pipelined CISC core with enhanced indexed addressing modes, BDM (Background Debug Mode) for in-circuit debug, and a flash-friendly memory map. The internal Vreg derives the core logic supply VDD from a single external rail, simplifying PCB design. A non-maskable interrupt (XIRQ) and 7 maskable interrupt sources support real-time control tasks typical of body controllers and sensor interfaces. Typical applications include automotive body controllers (BCM), HVAC control modules, instrument cluster sub-MCUs, industrial sensor interface nodes, CAN/J1850 network nodes, seat and door zone controllers, and low-end powertrain peripherals that do not require a 32-bit MCU. The wide 2.97 V to 5.5 V supply range tolerates automotive load-dump conditions and 5 V industrial backplanes. When designing with this part, leave headroom in the LQFP-52 thermal envelope and ensure the Vreg decoupling network (4.7 uF + 0.1 uF) follows the S12C reference design. Note the NRND lifecycle status - production is winding down, so design in the Q1 automotive qualified variant or migrate to the S12G family for new designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer product page or in the raw datasheet excerpts.

RFQ Contact
MC9S12C32MFAE16 - HCS12 16-Bit MCU 32KB Flash LQFP-48 | NXP
MC9S12C32MFAE16

MC9S12C32MFAE16 - HCS12 16-Bit MCU 32KB Flash LQFP-48 | NXP

The NXP Semiconductors MC9S12C32MFAE16 is a 16-bit HCS12 CISC microcontroller integrating 32KB of on-chip Flash memory and operating at a 16 MHz bus clock, housed in a 48-pin LQFP package. It targets cost-sensitive industrial and automotive network applications, providing on-chip peripherals, an integrated bandgap voltage regulator (VREG), and an on-chip PLL for flexible system clocking from a 2.97 V to 5.5 V external supply. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, and integrated peripherals such as timers, communication interfaces (SCI/SPI/I2C), and analog-to-digital converters. The HCS12C belongs to the broader HCS12 family of 16-bit CISC microcontrollers, optimized for deterministic real-time control in body electronics, sensor interfacing, and LIN-connected automotive nodes. Within the embedded hierarchy, MCUs sit below microprocessors (MPUs) and above standard logic ICs, providing an autonomous compute engine with on-chip non-volatile storage for firmware. Key differentiating features of the MC9S12C32MFAE16 include 32KB Flash, 2KB RAM, 1KB EEPROM, an 8-channel 10-bit ADC, up to 38 general-purpose I/O lines, an enhanced capture/timer module, and background debug mode (BDM) for in-circuit programming and debug. The integrated on-chip bandgap voltage regulator and phase-locked loop simplify power and clock tree design, removing the need for external regulators or oscillator tuning networks. Architecturally, the HCS12 core uses a 16-bit data path with a memory-management unit that unifies Flash, RAM, and EEPROM into a linear 64KB address space, supporting C and assembly firmware development through NXP's CodeWarrior and the GCC-based Eclipse toolchains. The peripheral module library is fully documented in NXP reference manuals, allowing deterministic interrupt-driven design with 16-bit timer prescalers and pulse-width modulation for motor and lighting loads. Typical applications include automotive body controllers, HVAC actuators, instrument clusters, and LIN/CAN-connected sensor nodes, as well as industrial general-purpose control where its 16-bit performance and 32KB flash capacity meet firmware size budgets. The 48-pin LQFP footprint makes it suitable for through-hole-compatible hand-rework prototypes and high-volume surface-mount assembly. Designers should allocate the VDD/VSS pins per the package pinout to ensure stable supply for the on-chip voltage regulator, place decoupling capacitors close to all VDD pins, and route the oscillator traces symmetrically when using an external crystal. The BDM interface requires a dedicated debug header for in-circuit programming; this must be considered in the PCB layout to avoid post-layout rework. This page synthesizes distributor stock, lifecycle status, drop-in alternatives, and design notes not found on a single manufacturer or distributor page, enabling engineers to evaluate the MC9S12C32MFAE16 for new designs and legacy migration.

RFQ Contact
MC9S12C32MFAE25 - 16-bit HCS12 MCU 32KB Flash 25MHz | NXP
MC9S12C32MFAE25

MC9S12C32MFAE25 - 16-bit HCS12 MCU 32KB Flash 25MHz | NXP

The NXP Semiconductors MC9S12C32MFAE25 is a 16-bit HCS12 microcontroller with 32KB (32K x 8) flash memory, a 25 MHz bus clock, and a 48-pin LQFP (7x7 mm) package. It belongs to the S12C family of flash-based MCUs for general-purpose industrial and automotive network applications. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die. The HCS12 (S12) family is built around the CPU12 CISC core, a 16-bit architecture widely deployed in automotive body electronics and industrial control. MCUs sit at the top of the embedded hierarchy: semiconductor -> integrated circuit -> microcontroller unit -> application-specific embedded controller. Key features include 32KB of flash program memory for code storage, an on-chip phase-locked loop (PLL) that allows flexible bus frequency synthesis up to 25 MHz, and an integrated bandgap-based voltage regulator (Vreg) that generates the internal VDD supply from a 2.97 V to 5.5 V external supply range. This wide supply range simplifies power design in 3.3 V and 5 V mixed systems. The MC9S12C32MFAE25 carries an automotive temperature grade (-40C to +125C) and comes supplied in a tray pack. The LFQFP gull-wing package supports surface-mount assembly and provides 48 I/O-capable terminals for connecting on-chip peripherals such as timers, serial interfaces (SCI, SPI), and the 10-bit ADC reported by distributors. Typical applications include automotive body and network nodes, industrial control panels, motor-adjacent monitoring logic, and general-purpose embedded systems where a 16-bit core and modest flash are sufficient. Design consideration: since the part is NRND (Not Recommended for New Designs) per NXP, new designs should evaluate the recommended successors or pin-compatible S12 family members listed below. This page adds distributor pricing, drop-in same-family alternatives, comparison tables, and design notes not consolidated in the manufacturer datasheet.

RFQ Contact
MC9S12C32MFUE25 - 16-bit HCS12 MCU 25MHz 32KB Flash | NXP
MC9S12C32MFUE25

MC9S12C32MFUE25 - 16-bit HCS12 MCU 25MHz 32KB Flash | NXP

The NXP MC9S12C32MFUE25 is a 16-bit HCS12 microcontroller IC operating at up to 25 MHz with 32 KB of flash memory (32K x 8), housed in an 80-pin QFP (14 x 14 mm) package. It belongs to the S12C family of flash-based MCUs for general-purpose industrial and automotive network applications. A 16-bit microcontroller is a complete computer-on-a-chip that processes data in 16-bit words, combining a CPU core, memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters within a single device. Within the semiconductor hierarchy, the MC9S12C32 sits under microcontrollers -> embedded processors -> integrated circuits, and within NXP's HCS12 (S12) architecture descended from the CPU12 core originally developed by Motorola and later Freescale Semiconductor. Key features include the HCS12 CISC core running at a 25 MHz bus frequency, 32 KB of on-chip flash program memory supporting in-system reprogramming, CANbus connectivity for automotive and industrial networks, an external bus interface (EBI/EMI), and SCI serial communication. The device operates from a 2.5V/5V supply scheme typical of the 5V-tolerant S12 family, giving strong noise immunity in electrically harsh environments. Architecturally, the S12C family leverages NXP's market-leading flash technology to deliver the power and flexibility of the 16-bit CPU12 core to cost- and space-sensitive designs, with the 80-pin option providing the largest I/O and peripheral expansion within the 48/52/80-pin S12C family lineup. Typical applications include body control modules and ECU nodes on automotive CAN networks, industrial control and automation controllers, and general-purpose embedded systems that benefit from 5V operation and 16-bit processing headroom. A key design consideration is lifecycle status: NXP lists this part as NRND (Not Recommended for New Designs), so new designs should evaluate S12G or S12XE successors, while existing designs can continue sourcing for maintenance. This page synthesizes distributor inventory data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with pricing and stock as of 2026-10-18.

RFQ Contact
MC9S12C32MPBE16 - 16-Bit HCS12 MCU, 32KB Flash, 52-LQFP | NXP
MC9S12C32MPBE16

MC9S12C32MPBE16 - 16-Bit HCS12 MCU, 32KB Flash, 52-LQFP | NXP

The NXP Semiconductors MC9S12C32MPBE16 is a 16-bit HCS12 CISC microcontroller with 32KB of on-chip Flash program memory, 2KB of RAM, and a 16 MHz CPU12 core, housed in a 52-pin LQFP package (10x10 mm) supplied in tray packaging. According to the NXP datasheet, this member of the MC9S12C-Family targets cost- and space-sensitive general-purpose industrial and automotive network applications, offering 35 I/O pins and an internal oscillator. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of programmable peripherals on one silicon die. The HCS12 family sits in the broader hierarchy: HCS12 -> 16-bit CISC microcontroller -> Freescale/NXP automotive MCU lineage -> embedded microcontroller -> semiconductor. The CPU12 core executes an instruction set that is opcode-compatible with the legacy 68HC11 and 68HC12 architectures, simplifying code reuse across product generations. Key features of the MC9S12C32MPBE16 include 32KB (32K x 8) of Flash, 2KB (2K x 8) of RAM, 35 programmable I/O lines, an integrated oscillator that eliminates the need for an external crystal in many designs, and a multi-channel 16-bit timer module. The device operates from a 2.5V/5V supply and supports in-application programming for field firmware updates. From an architectural perspective, the MC9S12C32MPBE16 leverages Freescale/NXP's proven flash technology and a C-optimized instruction set that produces extremely compact code. The 16 MHz bus clock delivers sufficient throughput for motor control, body-electronics, and sensor-fusion tasks while maintaining very low active power. Integrated peripherals include a CAN module (MSCAN), an SPI-compatible serial peripheral interface, a synchronous serial communication module (SCI), and a 10-bit analog-to-digital converter. Typical applications for the MC9S12C32MPBE16 include automotive body controllers, HVAC modules, industrial sensor-interface boards, and low-cost CAN-node endpoints. The combination of small package, internal oscillator, and CAN support makes it especially attractive for distributed ECUs where PCB area and BOM cost are at a premium. When designing with this device, ensure the BKGD pin is accessible for in-circuit debugging and Flash programming through the standard BDM (Background Debug Mode) interface. Plan the PCB layout so the VDD/VSS pin pair carries a low-impedance decoupling network of 0.1 uF and 4.7 uF capacitors placed within 5 mm of the package. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Contact
MC9S12C32MPBE25 - 16-bit HCS12 MCU, 32KB Flash, 25MHz | NXP
MC9S12C32MPBE25

MC9S12C32MPBE25 - 16-bit HCS12 MCU, 32KB Flash, 25MHz | NXP

The NXP Semiconductors MC9S12C32MPBE25 is a 16-bit HCS12 (S12C family) microcontroller with 32KB of flash program memory, a maximum bus frequency of 25MHz, and an integrated PLL, housed in a 52-pin TQFP (10x10mm) package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters on one die. The HCS12 family, originally developed by Motorola and Freescale Semiconductor and now part of NXP, sits within the broader 16-bit MCU hierarchy and descends from the widely deployed 68HC12 architecture, making it a mainstay in automotive body electronics and industrial control. Key features of the MC9S12C32MPBE25 include the CPU12 CISC core running at up to 25MHz, 32KB (32K x 8) of on-chip flash, and an on-chip bandgap-based voltage regulator (Vreg) that generates the internal digital supply (VDD) from a 2.97V to 5.5V external supply range. The included phase-locked loop (PLL) allows flexible clock scaling from a low-cost external crystal, trading bus speed against EMI and power. Architecturally, the device is a CMOS design in the S12C product series, packaged per JEDEC-style designation S-PQFP-G52 with a 0.65mm terminal pitch. The flash-based family covers 48, 52, and 80-pin options, so designs can scale memory and I/O count without changing toolchains. Typical applications include general-purpose industrial control, automotive network nodes, and cost- and space-sensitive embedded systems where a 16-bit core, modest flash, and robust I/O drive are sufficient. Design consideration: because the part is NRND (Not Recommended for New Designs) per the NXP product page, new designs should evaluate newer S12 family members while existing designs use this page for sourcing and replacement planning. This page synthesizes distributor availability, lifecycle status, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Contact
MC9S12C32VFAE16 - 16-Bit HCS12 MCU, 32KB Flash, 48-LQFP | NXP
MC9S12C32VFAE16

MC9S12C32VFAE16 - 16-Bit HCS12 MCU, 32KB Flash, 48-LQFP | NXP

The NXP Semiconductors MC9S12C32VFAE16 is a 16-bit microcontroller from the S12C family, built on the HCS12 (CPU12) core and integrating 32KB of on-chip Flash and 2KB of RAM in a 48-pin LQFP (7x7 mm) package. Operating from a 2.97 V to 5.5 V external supply, the device runs at up to 16 MHz bus speed and supports 31 general-purpose I/O lines with an internal oscillator plus an on-chip PLL for flexible clock generation. The part carries the VFAE16 ordering suffix that denotes the 48-LQFP package and 16 MHz speed grade. A 16-bit microcontroller (MCU) is a single-chip computer that combines a CPU, memory, and peripheral set on one die. The HCS12 (also called CPU12) is NXP/Freescale's enhanced 16-bit CISC core that adds indexed addressing and improved instructions over the original HC11 architecture. Within NXP's MCU taxonomy, the MC9S12C32 belongs to the S12C sub-family, a cost-optimized member of the broader S12X/S12/S12XE family that targets general-purpose industrial and automotive body network nodes where 8-bit MCUs lack throughput but full S12XE peripherals would be overkill. Key features of the MC9S12C32VFAE16 include 32KB Flash program memory arranged as 32K x 8, 2KB of static RAM, an integrated CAN 2.0 A/B controller (msCAN) for in-vehicle or industrial networking, an 8-channel 10-bit ADC, an Enhanced Capture Timer (ECT), PWM timers, SPI and SCI (UART) serial interfaces, and a built-in bandgap-based voltage regulator that derives the internal core supply from the external 5V rail. The 48-LQFP package provides a compact footprint and supports an operating temperature range of -40C to +105C or -40C to +125C depending on the specific test condition. Architecturally, the part uses a von Neumann 16-bit CISC core with two accumulator/index register pairs, immediate, extended, indexed, and relative addressing modes, and a single-wire background debug mode (BDM) interface for non-intrusive in-system programming. The 5V-tolerant I/O simplifies integration in 5V digital systems without level shifters, and the internal regulator removes the need for an external 1.8V or 2.5V LDO. Typical applications include automotive body controllers (BCM), HVAC control panels, instrument cluster sub-modules, seat control ECUs, industrial sensor nodes, and CAN-based distributed I/O. The part is also a frequent choice in LIN-to-CAN bridges when paired with an external LIN transceiver. When designing with the MC9S12C32VFAE16, ensure the BDM interface (BKGD, MODC, RESET*) is brought out to a debug header for production programming and field firmware updates, and observe the 5V supply decoupling layout specified in the S12C reference manual to keep ADC readings clean. This page synthesizes distributor pricing, NRND lifecycle notes, verified 48-LQFP drop-in alternatives from the same S12C family, and practical design guidance not found in the standalone manufacturer datasheet.

RFQ Contact
MC9S12C32VFAE25 - 16-bit HCS12 MCU, 32KB Flash, 25MHz | NXP
MC9S12C32VFAE25

MC9S12C32VFAE25 - 16-bit HCS12 MCU, 32KB Flash, 25MHz | NXP

The NXP MC9S12C32VFAE25 is a 16-bit HCS12 (S12C family) flash microcontroller delivering 25MHz core speed, 32KB of on-chip flash program memory, 2KB of RAM, and 31 general-purpose I/O lines in a 48-pin LQFP (7x7 mm) surface-mount package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals such as timers, serial communication modules, and analog interfaces. The MC9S12C32 belongs to the 16-bit microcontroller class and is opcode-compatible with the legacy 68HC11 and 68HC12 architectures, placing it within the broader embedded processor hierarchy used across industrial control and automotive network nodes. Key features include a C-optimized HCS12 CPU core producing extremely compact code, 32KB (32K x 8) flash program memory with in-application programmability, 2KB (2K x 8) RAM, and an internal oscillator that reduces external component count. The family description cites 48/52/80-pin flash-based options, giving designers pin-count scalability within one platform. The device integrates an on-chip bandgap-based voltage regulator (Vreg) that generates the internal digital supply (VDD) from an external supply range of 2.97V to 5.5V, and a phase-lock loop (PLL) circuit that lets the 25MHz bus frequency be synthesized from a low-frequency reference crystal, minimizing EMI. The 48-LQFP package with 31 I/O provides a dense but hand-solderable footprint for moderate-complexity nodes. Typical applications include automotive body and network modules, industrial control systems, and general-purpose embedded controllers where 16-bit performance and 32KB flash are sufficient. According to NXP product documentation, the S12C family targets general-purpose industrial and automotive network applications. Design consideration: because this part is listed as NRND (Not Recommended for New Designs) on the NXP product page, new designs should evaluate newer S12G/S12XE family members or a second-source strategy; existing designs can rely on Rochester Electronics for continued supply. This page synthesizes distributor pricing context, drop-in family alternatives, lifecycle status, and practical design notes not consolidated in the manufacturer datasheet.

RFQ Contact
MC9S12C64CFUE - 16-bit HCS12 MCU, 64KB Flash, 80-QFP | NXP
MC9S12C64CFUE

MC9S12C64CFUE - 16-bit HCS12 MCU, 64KB Flash, 80-QFP | NXP

The NXP Semiconductors MC9S12C64CFUE is a 16-bit HCS12 microcontroller (MCU) from the S12C family, integrating 64 KB of on-chip Flash, 4 KB RAM, and a 25 MHz CPU12 core in an 80-pin LQFP (QFP 80, 14x14 mm) package. The device is designed for general-purpose industrial and automotive body network applications, offering a wide 2.97 V to 5.5 V single-supply operating range with an internal bandgap voltage regulator (Vreg) that generates the internal digital supply (VDD). A 16-bit microcontroller is a CPU class that processes data and addresses in 16-bit words, sitting between 8-bit MCUs (lower cost, simpler control) and 32-bit MCUs (higher performance, richer peripherals). The HCS12 family is NXP's (formerly Freescale/Motorola) line of 16-bit CISC microcontrollers with enhanced peripherals, on-chip Flash, and BDM (Background Debug Mode) for in-circuit programming. The S12C family specifically targets cost- and space-sensitive industrial and automotive body networks where CAN connectivity and robust peripheral integration matter more than raw CPU throughput. Key features of the MC9S12C64CFUE include up to 50 MHz bus clock via an internal PLL, an enhanced 8-channel 10-bit ADC, up to 31 digital I/O ports, multiple timers (ECT 16-bit, 8-bit PWM, periodic interrupt), a serial peripheral interface (SPI), two SCI (UART) channels, and a 1 Mbyte/sec CAN 2.0 A/B controller. An on-chip bandgap-based voltage regulator supports a 2.97 V to 5.5 V external supply, and the part supports a single-wire BDM debug interface for development and field programming. Architecturally the S12C integrates the CPU12 core, Flash with EEPROM-like byte-erase and security features, RAM, a phase-locked loop (PLL), and peripheral logic on a single chip. The PLL allows the bus clock to be derived from a low-frequency external crystal, reducing EMI and BOM cost. The 25 MHz HCS12 instruction cycle and integrated peripherals make it well suited for real-time control loops in body-electronics modules and small industrial nodes. Typical applications include automotive body control modules (BCM), instrument clusters, HVAC controllers, seat and mirror controllers, industrial CAN nodes, sensor interfaces, and low-end motor control. The device balances 16-bit performance, on-chip Flash and CAN 2.0 in a compact LQFP-80 footprint, which is useful for cost-sensitive designs that still need networked communication. When designing with this part, ensure the external 2.97 V to 5.5 V supply is decoupled close to the VDD/VSS pins and that the PLL filter network follows the datasheet reference design. Note that this part is NRND (Not Recommended for New Designs) per NXP - existing designs may continue to source it, but new programs should evaluate active S12K or S32K successors. This page synthesizes distributor pricing, parametric specifications, and drop-in alternatives for the MC9S12C64CFUE that are not consolidated in the manufacturer datasheet.

RFQ Contact
MC9S12C64CPBE - 16-Bit 25MHz 64KB MCU | NXP Semiconductors
MC9S12C64CPBE

MC9S12C64CPBE - 16-Bit 25MHz 64KB MCU | NXP Semiconductors

NXP Semiconductors MC9S12C64CPBE is a 16-bit HCS12 microcontroller operating at 25 MHz with 64 KB of flash memory in a 52-pin LQFP package measuring 10 x 10 mm. The device supports an external supply range of 2.97 V to 5.5 V and includes an on-chip bandgap voltage regulator for the internal digital supply. It is designed for cost- and space-sensitive general-purpose industrial and automotive networking applications. An HCS12 microcontroller is a flash-based 16-bit embedded controller built around the CPU12 core. It belongs to the broader hierarchy of microcontrollers, embedded processors, and semiconductors. The S12C family combines flash program memory, digital control peripherals, communication interfaces, and timing resources on a single device, allowing a compact controller to manage system logic without a separate external memory or processor. The MC9S12C64CPBE provides 64 KB of flash, a 25 MHz operating frequency, a 16-bit CPU12 architecture, and a 52-pin surface-mount package. Its integrated phase-locked loop circuit supports flexible clock generation for systems that require controlled timing relationships between peripherals. The 2.97 V to 5.5 V external operating-supply range also allows use in both 3.3 V and 5 V system environments. The HCS12 platform combines a conventional embedded-control core with dedicated peripheral resources, making it suitable for automotive network nodes, industrial controllers, communications equipment, and cost-sensitive embedded products. Its 64 KB flash capacity provides room for application firmware, while the 52-pin LQFP package supports conventional surface-mount assembly and external access to communications and control signals. Typical uses include automotive body and network controllers, industrial interface modules, serial communication equipment, embedded gateways, and general-purpose automation products. For a new design, the family architecture is especially useful when an established 16-bit control platform, deterministic embedded firmware, and a moderate flash-memory requirement are priorities rather than the processing density of a 32-bit microcontroller. Before schematic capture, verify the exact peripheral pin assignment, alternate-function multiplexing, clock requirements, reset behavior, and programming connections against the MC9S12C64 family documentation. The broad 2.97 V to 5.5 V supply range simplifies rail selection, but the power architecture, decoupling, clock stability, and I/O voltage limits still require application-specific review. This product page combines the exact MC9S12C64CPBE identification, verified package and memory characteristics, sourcing guidance, a same-package replacement candidate, and practical design guidance. It helps engineers identify the correct device before moving to the manufacturer datasheet, cross-reference records, and PCB implementation details.

RFQ Contact
MC9S12C64MFAE - 16-bit HCS12 MCU, 64KB Flash, 25MHz | NXP
MC9S12C64MFAE

MC9S12C64MFAE - 16-bit HCS12 MCU, 64KB Flash, 25MHz | NXP

The NXP Semiconductors MC9S12C64MFAE is a 16-bit microcontroller unit (MCU) based on the HCS12 (S12C) CISC core, delivering 64KB (64K x 8) of on-chip Flash program memory at speeds up to 25MHz, housed in a 48-pin LQFP (7x7 mm) package. It integrates CANbus, EBI/EMI, SCI, and SPI connectivity, with on-chip peripherals including POR, PWM, and WDT. A microcontroller is a single-chip computer that combines a processor core, program memory, data RAM, and peripherals on one die. Within the semiconductor hierarchy, the MC9S12C64MFAE sits at the 16-bit MCU level, part of NXP's (formerly Freescale/Motorola) HCS12 family, which evolved from the industry-standard 68HC11 architecture. The S12C sub-family targets cost- and space-sensitive general-purpose industrial and automotive networked applications. Key differentiating features include the on-chip bandgap-based voltage regulator (Vreg) that generates the internal digital supply (VDD) from a wide external supply range of approximately 2.97V to 5.5V, a PLL circuit that lets the CPU run faster than the external crystal frequency, and 31 GPIO lines. These traits simplify board design and reduce external component count. Technically, the CPU12 CISC core executes efficient 16-bit code with rich addressing modes, while the Flash memory supports in-system reprogramming for field updates. The 4K x 8 of on-chip RAM (per datasheet listings) supports buffers for the CAN and SCI stacks. The integrated MSCAN module and standard SCI/SPI serial interfaces make networked node design straightforward. Typical applications include automotive body and network modules (CAN nodes), industrial control panels, motor control boards, and general-purpose embedded controllers where a 16-bit core with Flash and CAN is required. Design consideration: confirm the operating supply range against the specific datasheet revision, as distributor listings show both 2.5V-class and 5V-class references; the on-chip Vreg typically supports the 2.97V to 5.5V external range. This page synthesizes distributor pricing, drop-in S12-family alternatives, and practical design notes not found in the manufacturer datasheet, as of 2026-10-18.

RFQ Contact
MC9S12C64MFUE - 16-bit HCS12 MCU 64KB Flash QFP-80 | NXP
MC9S12C64MFUE

MC9S12C64MFUE - 16-bit HCS12 MCU 64KB Flash QFP-80 | NXP

The NXP MC9S12C64MFUE is a 16-bit HCS12 CISC microcontroller with 64 KB on-chip Flash, 4 KB RAM and 1 KB EEPROM, packaged in an 80-pin LQFP (QFP-80). The S12C family is part of NXP's 48/52/80-pin flash MCU line intended for cost- and space-sensitive industrial and automotive network applications, with the CPU12 core delivering mature 16-bit performance at bus speeds up to 25 MHz and a 50 MHz internal clock. An HCS12 microcontroller (MCU) is a 16-bit flash-based embedded processor that combines a CPU12 core with on-chip peripherals, analog modules and memory in a single chip. HCS12 sits in the hierarchy: HCS12 -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. Compared with 8-bit MCUs the 16-bit datapath offers higher code density per MHz; compared with 32-bit Cortex-M parts the HCS12 is typically chosen for legacy automotive body and network nodes where the 16-bit toolchain and S12 software base are already deployed. The MC9S12C64MFUE integrates an on-chip bandgap-based voltage regulator that derives the internal VDD from a 2.97 V to 5.5 V external supply, supporting both 3.3 V and 5 V systems without external regulation. The device includes a PLL for flexible clock generation from a wide range of external references, and an SCI, SPI and IIC/CAN communication block set targeting CAN-based automotive body controllers and LIN (LIN) sub-networks. 31 general-purpose I/O ports on the 80-pin package provide ample connectivity for sensor aggregation, while the 64 KB program Flash supports mid-sized application stacks with in-application reprogramming via the BDM interface. The HCS12 CISC architecture uses variable-length instructions and dedicated addressing hardware to maximise code density, allowing 64 KB of Flash to host feature-rich automotive body and industrial control applications. The integrated voltage regulator plus PLL simplify BOM cost by removing the need for an external analog supply chain, and the 80-pin LQFP package offers a low-cost plastic footprint compatible with reflow-through-in-place assembly. The part also includes background debug mode (BDM) for non-intrusive in-circuit emulation and flash programming. Typical applications include CAN/LIN body control modules, instrument clusters, automotive HVAC and seat controllers, industrial sensor hubs, RS-232/RS-485 networked sensors, and small appliance control boards. The wide 2.97 V to 5.5 V supply range allows direct connection to 5 V sensors and 12 V automotive rails after external regulation. The 64 KB Flash / 4 KB RAM memory mix suits tasks that need protocol stacks plus application logic but do not require the headroom of 128 KB-class S12C12 parts. When designing with the MC9S12C64MFUE, ensure the external VDD decoupling network follows the datasheet reference layout, with 100 nF + 4.7 µF placed within 5 mm of the supply pins. The PLL loop-component values must match the chosen reference oscillator; incorrect Rs/Cs will prevent lock and the part will run on the unmultiplied bus rate. Leave the BDM pins accessible for production programming and field firmware updates. Note: this part is marked NRND by NXP - plan last-time-buy if your product lifecycle exceeds 2027. This page synthesises distributor pricing, drop-in same-package alternatives within the S12C family, and practical hardware-design notes that complement the manufacturer datasheet for engineers evaluating the MC9S12C64MFUE for new designs or legacy maintenance.

RFQ Contact
MC9S12C64MPBE - 16-bit HCS12 MCU, 64KB Flash 25MHz | NXP
MC9S12C64MPBE

MC9S12C64MPBE - 16-bit HCS12 MCU, 64KB Flash 25MHz | NXP

The NXP Semiconductors MC9S12C64MPBE is a 16-bit HCS12 (S12C family) flash microcontroller running at up to 25 MHz bus frequency with 64KB of on-chip flash memory and 4KB of RAM, housed in a 52-pin LQFP (TQFP, 10x10 mm) surface-mount package. It integrates CAN and SCI serial communication interfaces, making it a compact single-chip control solution for networked embedded systems. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, sitting at the heart of embedded control systems. The S12C belongs to the broader 16-bit microcontroller family tree: HCS12 core -> CPU12 CISC architecture -> S12 platform -> NXP (formerly Freescale, originally Motorola) automotive and industrial MCU portfolio. Flash-based 16-bit MCUs like this one replaced masked-ROM predecessors by allowing field reprogramming. Key features include the 25 MHz HCS12 CPU12 core, 64KB (64K x 8) flash program memory, an on-chip CAN 2.0 controller for in-vehicle and industrial networks, multiple SCI (serial communication interface) UARTs, an 8-channel 10-bit ADC, and a wide operating supply derived from the 5V nominal system with on-chip voltage regulation (2.5V/5V internal domains). The MPBE speed suffix denotes the 25 MHz grade in the commercial temperature range. Technically, the device is based on Motorola/NXP flash technology with a CISC CPU12 instruction set, background debug mode (BDM) for non-intrusive development, and a phase-locked loop (PLL) clock system that lets designers trade core speed against EMC and power. Peripheral set includes periodic interrupt timer, pulse-width modulator channels, and standard S12 bus interfaces. Typical applications are automotive body and convenience modules (door, seat, lighting controllers), CAN-networked industrial nodes, building control, and general-purpose embedded systems where a 52-pin footprint and 64KB flash are sufficient. Design consideration: verify lifecycle status before new designs - NXP lists this part as NRND (Not Recommended for New Designs), so new projects should target pin-compatible S12G/S12XE successors. This page synthesizes distributor availability, drop-in family alternatives, lifecycle status, and practical design notes not consolidated in the manufacturer datasheet.

RFQ Contact
MC9S12C64VFAE - 16-Bit HCS12 MCU, 64KB Flash, LQFP-48 | NXP
MC9S12C64VFAE

MC9S12C64VFAE - 16-Bit HCS12 MCU, 64KB Flash, LQFP-48 | NXP

The NXP Semiconductors MC9S12C64VFAE is a 16-bit microcontroller from the S12C family featuring an HCS12 CPU core, 64KB of on-chip Flash memory, and a 48-pin LQFP (7x7 mm) package with HCS12 architecture delivering 25 MHz bus performance for cost-sensitive automotive and industrial network applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of peripheral interfaces such as timers, ADCs, communication ports, and general-purpose I/O. The HCS12 family sits in the 16-bit microcontroller tier of NXP's automotive product tree: HCS12 CPU -> S12C sub-family -> 16-bit MCU -> automotive microcontroller -> embedded processor -> semiconductor. The 16-bit data path gives a meaningful step up from 8-bit MCUs in code density, arithmetic performance, and peripheral integration while keeping peripheral programming simple. Key features of the MC9S12C64VFAE include 64KB of Flash program memory, 4KB of RAM, 31 general-purpose I/O pins, an on-chip bandgap-based voltage regulator that derives the core VDD from a 2.97V to 5.5V external supply, an integrated phase-locked loop (PLL) for flexible clocking, multiple serial communication interfaces (SCI, SPI), timers, an 8/10-bit ADC, and a CAN 2.0 A/B controller for in-vehicle networking. The device supports background debug mode (BDM) for non-intrusive in-circuit development. The S12C architecture uses a 16-bit HCS12 core with a Von Neumann bus and a unified memory map, simplifying C-code development with NXP's CodeWarrior and the newer S32 Design Studio toolchains. The on-chip voltage regulator allows operation from a single 5V automotive rail while generating the lower core voltage internally, reducing BOM cost and PCB complexity. Typical applications include body electronics controllers (door modules, seat controllers, mirror modules), CAN node endpoints in automotive networks, industrial sensor hubs, HVAC controllers, lighting controllers, general-purpose 16-bit control, and appliance control boards that benefit from automotive-grade peripherals such as CAN and a wide supply range. When designing with the MC9S12C64VFAE, place the four VDD/VSS bulk capacitors specified in the datasheet close to their respective pins to ensure stable regulator operation. Always use the BDM interface for firmware development; the BDM pinout is part of the 48-pin LQFP pinmap and must be reserved for programming/debug access. This page synthesizes distributor pricing, drop-in alternatives drawn from the same NXP S12C family and other sources, and practical design notes not found in the manufacturer datasheet alone.

RFQ Contact
MC9S12C64VFUE - HCS12 16-Bit MCU, 64KB Flash, 80-QFP | NXP
MC9S12C64VFUE

MC9S12C64VFUE - HCS12 16-Bit MCU, 64KB Flash, 80-QFP | NXP

The NXP MC9S12C64VFUE is a 16-bit HCS12 microcontroller with 64KB on-chip Flash, 25 MHz CPU core, and an 80-pin LQFP (14x14 mm) package, designed for general-purpose industrial and automotive network applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of peripherals including timers, ADC, communication interfaces, and GPIO. Within the embedded-system taxonomy, an MCU sits below microprocessors (which need external RAM/ROM) and above simple logic ICs. The HCS12 family from NXP is a 16-bit CISC architecture widely adopted in automotive body, chassis, and body-control applications because of its deterministic interrupt latency, on-chip CAN, and robust Flash endurance. Key features of the MC9S12C64VFUE include 64KB of Flash program memory, 4KB of RAM, an integrated CAN 2.0 A/B controller (MSCAN), an 8-channel 10-bit ADC, multiple timer modules (TIM/PWM/ECT), SPI and SCI/UART serial interfaces, an on-chip bandgap voltage regulator for a single 5V (or 3.3V) external supply, and a phase-locked loop (PLL) that lets the bus clock scale from the internal reference. The part supports background-debug (BDM) and is offered in an 80-pin LQFP. Typical applications include automotive body controllers, instrument clusters, HVAC control modules, CAN node endpoints, industrial sensor hubs, and small motor-control boards. The 64KB Flash, multi-channel PWM, and integrated CAN make it especially useful in distributed automotive networks where the MCU terminates a CAN bus, drives FET drivers, and reads sensor inputs. Industrial designers also adopt it for low-cost PLC I/O modules and remote telemetry. When designing with this part, choose decoupling per NXP AN2404, place the 5V decoupling within 5 mm of VDD/VSS pins, follow the recommended oscillator layout, and reserve the BKGD pin for in-circuit debug. The V suffix in the MPN (VFUE) denotes the 80-pin LQFP industrial temperature grade (-40C to +85C). This page synthesizes distributor pricing, drop-in same-package alternatives, pinout, and practical design notes not found in the manufacturer datasheet alone.

RFQ Contact
MC9S12C96CFAE - 16-Bit 25MHz 96KB Flash MCU | NXP
MC9S12C96CFAE

MC9S12C96CFAE - 16-Bit 25MHz 96KB Flash MCU | NXP

The NXP MC9S12C96CFAE is a 16-bit HCS12 microcontroller operating at up to 25 MHz, with 96 KB of embedded flash memory, in a 48-pin LQFP package measuring 7 mm by 7 mm. The device supports an external supply range of 2.97 V to 5.5 V and includes an on-chip bandgap-based voltage regulator for the internal digital supply. It also incorporates a phase-lock loop circuit for clocking flexibility. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface logic into one device. The HCS12 architecture belongs to the broader embedded-controller and embedded-microcontroller hierarchy. It is intended for compact embedded control systems where deterministic control, serial communication, timing, and analog signal handling must be combined in a low-power integrated circuit. The MC9S12C96CFAE provides 96 KB of flash for firmware and 16-bit processing through the HCS12 core. Its 25 MHz maximum clock rate supports interrupt-driven control, communication protocol handling, and state-machine-based automation. The 48-LQFP package exposes more I/O than smaller controller packages while retaining a standard surface-mount form suitable for industrial control boards and production reflow. NXP identifies this device as part of the flash-based S12C family designed for general-purpose industrial and automotive network applications. Its phase-lock loop supports derived internal clocking, while the internal regulator decouples the MCU core supply from the external operating range. Because the 48-pin package provides a comparatively dense pin count, careful signal partitioning is essential when assigning communication, timing, debug, and control functions. Typical uses include industrial sensor controllers, automotive body and network electronics, motor-control supervisory circuits, serial gateway equipment, and compact embedded automation modules. The 96 KB flash capacity is useful for moderate firmware footprints, while the 16-bit HCS12 instruction set and peripheral integration reduce the need for separate logic devices in control-oriented products. PCB implementation should preserve the pin assignments and decoupling recommendations in the manufacturer datasheet. Place the supply capacitors adjacent to the relevant power pins, route oscillator and reset signals away from high-current switching nodes, and assign unused pins according to the package guidance. Firmware and board revisions should also be checked against the applicable errata before production release. This product page combines the manufacturer overview, distributor specifications, lifecycle information, package details, and engineering-oriented selection guidance. It also distinguishes true pin-compatible substitution candidates from broader functional comparisons, helping designers assess whether a second source can be used without changing the 48-LQFP board footprint.

RFQ Contact
MC9S12C96CFAE557 - 16-Bit 96KB Flash HCS12 MCU 48-LQFP | NXP
MC9S12C96CFAE557

MC9S12C96CFAE557 - 16-Bit 96KB Flash HCS12 MCU 48-LQFP | NXP

The NXP MC9S12C96CFAE557 is a 16-bit HCS12-family microcontroller with 96 KB of on-chip Flash, 4 KB RAM and 1 KB EEPROM, packaged in a 48-pin LQFP (7x7 mm, 0.5 mm pitch). It runs the CPU12 core at up to 25 MHz from a 2.97 V to 5.5 V supply and integrates a 10-bit ADC, up to six PWM channels, two SCI, one SPI, one I2C, and a CAN 2.0 A/B module for industrial and automotive network nodes. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash/ROM), volatile working memory (RAM), and a set of programmable peripherals onto one die. The HCS12 core family occupies the 16-bit microcontrollers niche - wider data paths and richer instruction sets than 8-bit MCUs while remaining simpler, lower power, and easier to use than 32-bit ARM Cortex-M parts. In the broader taxonomy: microcontroller -> embedded processor -> semiconductor -> integrated circuit. Flash-based HCS12 devices are commonly used where deterministic interrupt latency and on-chip CAN are required. Key features of the MC9S12C96CFAE557 include 96 KB Flash with security and in-application programming support, 1 KB EEPROM for data logging, an internal bandgap voltage regulator that derives the core 2.5 V from the external 5 V rail, a phase-locked-loop (PLL) for flexible bus-clock generation, a background debug mode (BDM) interface for non-intrusive debug, and an on-chip CAN 2.0 A/B controller with hardware filtering. The 48-LQFP package exposes 31 general-purpose I/O lines and supports automotive ambient grades of -40C to +125C. The device uses a Harvard-style 16-bit CPU12 core with an enhanced instruction set (including fuzzy logic and table-lookup instructions) that simplifies encoder/decoder and control-loop code. The integrated CAN module eliminates external controller chips, and the bandgap regulator plus on-chip POR/BOR circuits simplify power-tree design in distributed nodes such as sensor clusters, body controllers and seat modules. Typical applications include CAN node endpoints in vehicle body and chassis networks, LIN-to-CAN bridges, industrial CANopen and DeviceNet slave stations, HVAC fan and blower controllers, and general-purpose 16-bit control boards that require Flash with field-upgrade capability. Design with this part by keeping the external supply between 3.0 V and 5.5 V and using a 100 nF decoupling cap on each VDD/VSS pair. The CAN bus requires a TJA1050 or similar transceiver; the MCU CAN TX/RX pins are not 5 V bus-tolerant and must not be wired directly to a CANH/CANL cable. This page consolidates distributor pricing, drop-in alternatives, and design notes specific to the MC9S12C96CFAE557, complementing the manufacturer datasheet with selection and lifecycle context.

RFQ Contact
MC9S12C96CFUE - 16-Bit 25MHz 96KB Flash MCU | NXP
MC9S12C96CFUE

MC9S12C96CFUE - 16-Bit 25MHz 96KB Flash MCU | NXP

The NXP Semiconductors MC9S12C96CFUE is a 16-bit HCS12 microcontroller rated at 25 MHz, with 96 KB of flash memory and an 80-pin LQFP package measuring 14 x 14 mm. According to the NXP product page, its S12C family architecture targets general-purpose industrial and automotive network applications, while the on-chip bandgap voltage regulator supports a 2.97 V to 5.5 V external supply range. A microcontroller, or MCU, is a compact embedded processor that integrates a CPU core, program memory, data memory, peripherals, and I/O on one semiconductor. An HCS12 MCU belongs to the embedded processor and controller hierarchy, where firmware executes real-time control tasks. The MC9S12C96CFUE combines a 16-bit data bus and flash-based program storage in a surface-mount package suitable for established control-system designs. The verified listing identifies a 16-bit HCS12 core, 25 MHz maximum clock, and 96 KB flash. NXP further states that the family includes a phase-lock loop circuit and an internal bandgap-based regulator. These features support clock-based control and internally regulated digital operation, although detailed peripheral counts and memory-map information must be confirmed in the manufacturer data sheet before design release. The 80-pin package supports a larger pin budget than smaller S12C members and is intended for automotive networking, industrial controllers, communication modules, and embedded gateways. The exact package suffix, electrical limits, pin multiplexing, programming connectors, and production status should be checked against the current NXP documentation, especially because the official product page marks this exact orderable MPN as NRND. A key sourcing consideration is lifecycle risk. NRND means the part is not recommended for new designs, while it may remain available for existing supported programs. Buyers should therefore treat MC9S12C96CFUE as a lifecycle-constrained sourcing choice rather than the default choice for a new design unless continuity of an established platform is required. This page consolidates the verified NXP and distributor facts, clarifies the NRND lifecycle decision, and separates confirmed specifications from data that still requires datasheet review. For a robust embedded design, validate pin multiplexing, timing, memory maps, electrical characteristics, package drawing, and software migration requirements directly with NXP before schematic approval.

RFQ Contact
MC9S12C96MFAE - 16-bit HCS12 MCU, 96KB Flash, 48-LQFP | NXP
MC9S12C96MFAE

MC9S12C96MFAE - 16-bit HCS12 MCU, 96KB Flash, 48-LQFP | NXP

The NXP MC9S12C96MFAE is a 16-bit HCS12 microcontroller with 96KB on-chip Flash, 4KB RAM, and a 25MHz CISC core, housed in a 48-pin LQFP (7x7 mm) package. It integrates a CAN 2.0 controller, SCI/SPI serial interfaces, PWM channels, and a watchdog timer, targeting cost-sensitive automotive body and industrial network nodes. The 2.97V to 5.5V single-supply operation with an internal bandgap voltage regulator simplifies board design versus parts needing multiple rails. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of programmable peripherals. The HCS12 family is a 16-bit CISC architecture that evolved from the original Motorola/Freescale HC12, providing deterministic interrupt latency, a background debug mode (BDM) interface, and a CPU12 instruction set that is largely object-code compatible with the older HC11. Within the broader taxonomy, the HCS12 sits under 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. The S12C sub-family is the cost-optimized tier within HCS12, sharing the same peripheral IP with the higher-pin S12G/S12P families while trimming 12 layers to the minimum footprint for LIN/CAN edge nodes. Key features include 31 GPIO lines, an on-chip PLL for flexible bus-clock generation from an external crystal or resonator, a 16-channel 10-bit ADC, an 8-channel PWM module, and a CAN 2.0A/B controller compatible with DeviceNet and CANopen stacks. The 96KB Flash is split into a 96K x 8 array with hardware-secured block protection for bootloader/application partitioning, and 4KB RAM supports typical RTOS or foreground/background automotive stacks. Architecturally the device uses a von-Neumann style unified memory map with 23-bit Flash paging, a 16-bit ALU, and a hardware multiply/divide engine. The integrated voltage regulator (VREG) generates the 2.5V internal digital supply from the external 5V rail, eliminating the need for an external LDO in many 5V-only body modules. This combined with on-chip CAN, SCI, and SPI makes the part a one-chip solution for distributed automotive networks. Typical applications include CAN-connected body control modules (BCM), instrument cluster sub-MCUs, HVAC damper controllers, LIN/CAN gateway nodes, and industrial sensor interface boards. In automotive body networks the part typically acts as a slave node communicating over CAN at 125-500 kbps with a master BCM. The AEC-Q100 qualification and 48-pin LQFP expose pad package also support harsh-environment mounting. When designing with this device, ensure the BDM debug header is brought out to a 6-pin standard debug connector to allow in-circuit Flash programming and runtime debug. Decouple VDD/VSS with 100nF + 4.7uF ceramic close to the pins, and route the EXTAL/XTAL traces as short and symmetric as possible to avoid PLL jitter. Designers should also verify the latest PCN status - NXP has marked this part NRND. This page synthesizes distributor pricing, verified drop-in alternatives (same NXP S12C family), and practical design notes not aggregated on any single distributor page.

RFQ Contact
MC9S12C96MPBE - HCS12 16-Bit MCU 96KB Flash 52-LQFP | NXP
MC9S12C96MPBE

MC9S12C96MPBE - HCS12 16-Bit MCU 96KB Flash 52-LQFP | NXP

The NXP MC9S12C96MPBE is a 16-bit HCS12 microcontroller (MCU) with 96KB of on-chip Flash program memory and 4KB of RAM, operating at up to 25 MHz core speed and housed in a 52-pin LQFP package (10 mm x 10 mm body). It belongs to the cost-effective MC9S12C-family and was originally designed by Freescale Semiconductor (now part of NXP) for general-purpose Industrial and Automotive network applications. The integrated peripherals include CANbus, SCI, SPI, EBI/EMI, PWM, a Watchdog Timer, and a Power-On Reset block, with 35 programmable I/O lines. A 16-bit microcontroller (MCU) is a single-chip computing engine that integrates a CPU, program memory (Flash), data memory (RAM), and a configurable set of peripherals around the CPU to handle real-time control tasks. The MC9S12C96 sits inside the Freescale/NXP automotive MCU hierarchy as: HCS12 -> CPU12 -> 16-bit CISC core; S12C family -> cost-optimized derivative; microcontroller -> embedded processor -> semiconductor device. Compared with 8-bit MCUs such as the 8051 or PIC16, the HCS12's 16-bit datapath and 25 MHz CPU12 core deliver higher arithmetic throughput while retaining deterministic interrupt response. Key features include: 96KB single-voltage Flash with in-application reprogramming, 4KB SRAM, an internal oscillator that simplifies BOM by removing the external crystal in many designs, 35 GPIO, and 8-bit PWM channels suitable for motor control loops. Communication is provided by one CAN 2.0 A/B module, one SCI (UART) and one SPI channel, plus the external bus interface (EBI/EMI) for memory expansion. The CPU12 core uses a 16-bit CISC architecture with an instruction pipeline, addressing up to 1 MB of linear memory through banked windows. Bus speed is derived from the PLL-multiplied oscillator and supports single-wire background debug mode (BDM) for non-intrusive in-circuit programming and field updates. Typical applications include automotive body controllers, HVAC actuators, instrument clusters, industrial CAN nodes, and sensor-interface boards where the CAN bus is the primary network. The wide supply range (2.5V/5V) lets the same board host either 3.3V or 5V peripherals. When designing with this device, budget for proper decoupling near every VDD/VSS pin pair and place the CAN transceiver close to the MCU to keep the bus-stub length short. The BDM interface is recommended for production firmware programming because it allows in-application updates without pulling the part out of the socket.

RFQ Contact
MC9S12C96VPBE - 16-Bit 25MHz HCS12 MCU, 96KB Flash, 52-LQFP
MC9S12C96VPBE

MC9S12C96VPBE - 16-Bit 25MHz HCS12 MCU, 96KB Flash, 52-LQFP

The NXP Semiconductors MC9S12C96VPBE is a 16-bit HCS12 microcontroller operating at up to 25 MHz, with 96 KB of embedded flash memory, supplied in a 52-pin LQFP package measuring 10 x 10 mm. The MC9S12C96VPBE also carries an industrial temperature-grade designation and is identified by NXP as an S12C automotive and industrial microcontroller. Its combination of embedded flash, a 16-bit HCS12 core and a 52-pin low-profile quad flat package makes it suitable for embedded control systems that require moderate code storage and a compact surface-mount footprint. An HCS12 microcontroller is a 16-bit embedded processing device built around the HCS12 core architecture. The term microcontroller describes the integration of a processor core, program memory, data memory, peripheral interfaces and control logic on a single integrated circuit. Within the broader semiconductor hierarchy, the MC9S12C96VPBE is a microcontroller, a type of embedded processor and controller, and a member of NXP's HCS12/S12C product family. It is intended for applications in which a dedicated controller handles real-time input processing, peripheral control and system sequencing without requiring a separate host processor. The three defining characteristics of this device are its 25 MHz maximum operating frequency, 96 KB of flash memory and 52-pin LQFP packaging. The 16-bit architecture provides a larger native data width than an 8-bit controller, while the 96 KB flash allocation provides space for application code and fixed firmware. The 10 x 10 mm surface-mount package supports compact controller boards but requires careful land-pattern design, thermal planning and soldering control during assembly. The HCS12 platform provides the architectural foundation for real-time embedded control through an integrated core and dedicated peripherals. Because the MC9S12C96VPBE is identified as an S12C automotive and industrial MCU, it is appropriate to evaluate it for industrial controllers, electronic control modules, actuator controllers and other embedded systems. Development activity typically includes configuring the MCU hardware with the appropriate NXP or third-party HCS12 toolchain, allocating flash-resident code, and assigning the available pins according to the device's pin-description and multiplexing tables in the manufacturer datasheet. Typical application areas include industrial machine and motor controllers, automotive body and auxiliary control modules, sensor-conditioning hubs, communications controllers and compact embedded control products. Its 96 KB flash budget suits moderate firmware loads involving state-machine logic, monitoring, diagnostics and communication protocols. The 52-LQFP package also permits a smaller board than many older high-pin-count microcontrollers, which is valuable when the enclosure limits connector placement and thermal dissipation area. The principal design consideration is package-level: the 0.5 mm lead pitch of a 52-LQFP requires a stable PCB footprint, adequate solder-mask and paste control, and inspection that can resolve closely spaced leads. Firmware and peripheral configurations must also be checked against the MC9S12C96 pin multiplexing and operating limits before the design is released for production. This page combines the verified NXP product identity and distributor technical summaries with engineering-focused packaging, comparison and design guidance. It also identifies related HCS12 controllers that can be evaluated when memory density or qualification requirements differ from those of the MC9S12C96VPBE.

RFQ Contact