PIC18F26Q10-E/ML
PIC18F26Q10-E/ML - 8-Bit 64MHz 64KB Flash MCU | Microchip
The Microchip Technology PIC18F26Q10-E/ML is an 8-bit PIC18 XLP microcontroller delivering 64 MHz CPU performance with 64 KB Flash, 4 KB SRAM, and 256 B EEPROM, housed in a 28-pin QFN (6x6 mm) package with exposed thermal pad. It operates from 2.5 V to 5.5 V with 5 V tolerance on digital I/O, integrates a 10-bit ADC with Computation (ADC2), a 5-bit DAC, four 10-bit PWM outputs, configurable logic cells (CLC), complementary waveform generator (CWG), hardware limit timer (HLT), windowed watchdog timer (WWDT), and scan/CRC for functional-safety applications.
An 8-bit microcontroller (MCU) is a single-chip computer optimized for embedded control, executing one byte per instruction cycle while integrating CPU, non-volatile program memory, RAM, and peripherals on one die. Within the semiconductor hierarchy, the PIC18F26Q10-E/ML is a microcontroller belonging to the 8-bit MCU class, a sub-category of microcontrollers, which themselves sit under embedded processors, broader mixed-signal ICs, and finally the semiconductor taxonomy. Its 8-bit RISC core, modified Harvard architecture, and 5 V I/O tolerance make it distinct from 3.3 V ARM Cortex-M parts.
Key features include Functional Safety (FuSa) support, ultra-low-power XLP sleep currents, 36 instruction set, hardware multiplier, direct and indirect addressing modes, multiple I/O ports (PORTA/PORTB/PORTC), and on-board debug via ICD/ICSP. The 64 KB Flash supports 100K endurance cycles typical, with self-programmability and code protection. The 28-QFN (6x6) package provides 23 I/O pins and a low thermal resistance path through the exposed pad for high-current GPIO drive.
The PIC18-Q10 architecture pairs a deterministic 8-bit core with Core Independent Peripherals (CIPs) - CLC, CWG, HLT, and ADC2 - which offload timing-critical tasks from the CPU, improving real-time responsiveness. The 5 V operation directly interfaces to industrial sensors, motor drivers, and noisy environments without external level shifters, reducing BOM and PCB area.
Typical applications include industrial sensor nodes, BLDC/PMSM motor control, LED lighting controllers, home appliances, automotive body and chassis ECUs (non-safety), IoT edge nodes with long battery life, and human-machine interfaces. The XLP nanoWatt technology enables sleep currents below 50 nA typical, suiting battery-backed designs.
When designing with this device, allocate the exposed pad (EP) as the primary thermal dissipation path, place a 100 nF decoupling capacitor on each VDD pin, and reserve the ICSP/ICD pins for in-circuit programming to simplify firmware iteration.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet - enabling faster vendor comparison and supply-chain decisions.
RFQ
Contact