PIC18LF26K42-I/MX
PIC18LF26K42-I/MX - 64KB Flash 8-bit MCU, 64MHz XLP | Microchip
The Microchip Technology PIC18LF26K42-I/MX is an 8-bit PIC® XLP™ 18K-series microcontroller with 64KB Flash, 4KB RAM, and 1KB EEPROM, running at up to 64MHz, housed in a 28-pin UQFN (6x6 mm) package with exposed pad. The LF prefix denotes the low-voltage variant, supporting an operating voltage range of 1.8V to 3.6V from the same die as the F-version (which extends to 5.5V). The device integrates a rich set of Core Independent Peripherals (CIPs) including a 12-bit ADC with computation (ADC2), a 5-bit DAC, three analog comparators, PWM, vectored interrupts, and two DMA channels that move data between memory and peripherals without CPU involvement.
A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (RAM), and a range of on-chip peripherals such as timers, communication interfaces, and analog blocks. Within the broader taxonomy, the PIC18LF26K42 sits in the 8-bit MCU category, under microcontrollers, under integrated circuits. The "LF" suffix indicates Microchip's low-power (XLP - eXtreme Low Power) family, optimized for battery-powered and energy-harvesting applications where nanoWatt sleep currents are critical. The "K42" denotes a feature-rich family with extensive CIP integration and high-resolution analog.
Key differentiating features include the 12-bit ADC2 with automated accumulation, averaging, and threshold comparisons offloaded from the CPU, and the Peripheral Pin Select (PPS) that remaps most digital I/O functions to any pin. With 25 usable I/O pins on the 28-pin UQFN footprint and four 16-bit timers, the device delivers high I/O density for its package size. Sleep current is rated in the nanoWatt range with multiple power-managed modes (DOZE, IDLE, SLEEP) and an on-chip voltage reference. The integrated DMA enables background data movement between ADC results and memory buffers, freeing CPU cycles for application logic.
Architecturally, the PIC18F26K42 uses a RISC-based 8-bit core with a 16-bit instruction word, an 8-level hardware stack, and C-compiler-friendly architecture. The Microchip MPLAB X IDE with XC8 compiler provides free and commercial development toolchains, and the device is supported by the MPLAB Code Configurator (MCC) for graphical peripheral setup. The same die is offered in 28/40/48-pin variants, and the LF (low-voltage) and F (full-voltage) versions are pin-compatible, simplifying dual-sourcing strategies.
Typical applications include low-power IoT sensor nodes, battery-powered medical monitors (e.g., glucose meters, pulse oximeters), industrial HMI panels, USB-CDC/HID peripherals, and consumer remote controls. The XLP nanoWatt technology and integrated DMA make it well-suited to always-on edge devices running from a coin cell or energy harvester. In automotive body electronics and aftermarket accessories, the wider PIC18F26K42 family is also commonly deployed.
When designing with this part, note that the LF variant is limited to 3.6V maximum; for designs requiring 5V tolerance, choose the F variant (PIC18F26K42-I/MX). The exposed pad of the UQFN-28 package must be soldered to the PCB ground plane for thermal dissipation and electrical performance; missing the pad connection can cause latch-up or logic errors.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, helping procurement and engineering teams select, source, and design with the PIC18LF26K42-I/MX more efficiently.
RFQ
Contact