Power Management
Subcategories
Products (2,800+)
LT1076CQ#TRPBF - 2A Buck/Boost/Flyback Regulator | Analog Devices
The LT1076CQ#TRPBF is a monolithic bipolar switching regulator from Analog Devices, rated for 2A switch current and designed for buck, boost, and flyback topologies. It operates from input voltages up to 45V and provides an adjustable output from 2.5V to 50V. The device integrates the power switch, oscillator, control circuitry, and current limit components on a single chip, requiring only a few external parts for normal operation. Housed in a TO-263-6 (D2PAK) package with 5 leads plus tab, it is suitable for surface-mount designs. A switching regulator is a voltage regulator that uses a series element that switches between on and off states to maintain a constant output voltage. Unlike linear regulators, switching regulators achieve high efficiency by storing energy in inductors and capacitors, making them ideal for applications where power dissipation and battery life are critical. The LT1076 belongs to the family of monolithic switching regulators, which integrate the control circuitry and power switch into a single IC, simplifying design and reducing component count. Key features of the LT1076CQ#TRPBF include a 2A switch current rating, a wide input voltage range of 7.3V to 45V, and an adjustable output voltage from 2.5V to 50V. The device operates at a switching frequency of 100kHz, balancing efficiency and component size. It also includes an output monitor and current limit protection, enhancing reliability in demanding applications. The TO-263 package provides excellent thermal performance, with a low thermal resistance that supports continuous operation at high load currents. Technically, the LT1076 uses a classic positive buck topology but includes design innovations that allow it to be configured as a positive-to-negative converter or a flyback converter. The internal oscillator and control circuitry are designed for stable operation across a wide range of input and output conditions. The device's bipolar process technology ensures robust performance and long-term reliability, making it a trusted choice for industrial and automotive power supplies. Typical applications include distributed power systems, battery chargers, and point-of-load converters. The LT1076 is particularly well-suited for industrial control systems, telecom equipment, and automotive electronics where a rugged, high-efficiency switching regulator is required. Its ability to handle both step-down and step-up configurations adds versatility to power supply designs. When designing with the LT1076CQ#TRPBF, ensure proper input and output capacitor selection to minimize ripple and maintain stability. The inductor value should be chosen based on the desired ripple current and switching frequency. Adequate PCB copper area is essential for thermal management, especially at high output currents.
LT1086CT-3.3 - 1.5A, 3.3V Fixed LDO | Analog Devices | TO-220
The Analog Devices (formerly Linear Technology) LT1086CT-3.3 is a 1.5 A low-dropout (LDO) positive fixed 3.3 V linear regulator in a 3-pin TO-220 package. The device belongs to the LT1086 family, which also includes adjustable (LT1086), 2.85 V, 3.6 V, 5 V, and 12 V fixed-output variants, all sharing the same TO-220-3 / TO-3P / TO-247-3 pinout. An LDO (low-dropout) linear regulator is a type of voltage regulator that maintains a stable output voltage even when the input supply voltage is only slightly higher than the output - typically 1.05 V to 1.5 V of dropout. LDOs sit within the broader category of linear regulators, which in turn are a subset of voltage regulators and ultimately of power management integrated circuits (PMICs). Unlike switching regulators, an LDO adds no switching noise to the output but dissipates the voltage difference (VIN - VOUT) x IOUT as heat. Key features of the LT1086CT-3.3 include a 1.5 A maximum output current, fixed 3.3 V output (±1% or ±2% accuracy depending on grade), line/load regulation typically 0.05%, and ripple rejection exceeding 75 dB even at full 1.5 A load. The composite NPN output stage and floating architecture allow all quiescent current to flow to the load, increasing efficiency. The device is pin-compatible with older 3-terminal adjustable regulators such as the LM317 and LM350, simplifying retrofit designs. Internally, the LT1086 uses a bandgap reference, an error amplifier, and a composite NPN pass element. All quiescent current flows to the load, which boosts efficiency at heavy loads. The reference is trimmed at the wafer stage, so no external adjustment resistor network is required for the fixed-voltage suffix devices - reducing external component count. Typical applications for the LT1086CT-3.3 include powering 3.3 V logic rails from a 5 V bus, post-regulation after a switching converter (to remove switching ripple), battery-powered systems, and industrial 24 V → 3.3 V conversion where a 5-10 V headroom is acceptable. It is also widely used as a 3.3 V auxiliary supply for microcontroller and DSP subsystems. When designing with this part, ensure the input-to-output differential stays within the absolute maximum rating and provide at least a 10 µF output capacitor for stability. A small heatsink is recommended when (VIN - VOUT) x IOUT exceeds 2-3 W because the TO-220 thermal resistance typically limits dissipation to 15-20 W without airflow. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
LT1129IQ - 700mA Micropower LDO Regulator with Shutdown | ADI
The Analog Devices LT1129IQ is a micropower low-dropout (LDO) linear regulator with shutdown, delivering up to 700 mA of output current with a 400 mV dropout voltage in a 5-lead DDPAK package. Designed for battery-powered systems, it operates from a wide input voltage range of 4.5 V to 30 V and provides adjustable output from 3.8 V to 30 V. An LDO (Low-Dropout) linear regulator is a type of voltage regulator that maintains a stable output voltage even when the input voltage approaches the output voltage, with dropout voltage being the minimum VIN-VOUT differential required to maintain regulation. LDOs sit within the broader hierarchy of linear regulators, which in turn are part of the power management IC family of semiconductors. They are preferred over switching regulators in noise-sensitive applications because they introduce no switching ripple. Key features include 0.4 V dropout voltage at full 700 mA load, 50 µA quiescent current during normal operation, 16 µA quiescent current in shutdown mode, and the absence of required protection diodes. The device is stable with only 3.3 µF of output capacitance, significantly less than older regulators that require 10–100 µF, simplifying board design and reducing BOM cost. The LT1129IQ uses a PNP pass transistor architecture that achieves low dropout while maintaining controlled quiescent current in dropout conditions. Reverse-battery protection is built in: the input may be connected to ground or a reverse voltage without reverse current flow from output to input, a critical feature for automotive and battery applications. Typical applications include battery-powered portable instruments, post-regulators for switching supplies, automotive electronics, point-of-load regulation, and handheld instrumentation requiring long battery life. The wide 30 V input range also makes it suitable for industrial 24 V bus systems. When designing with this part, pay attention to thermal management. At VIN = 24 V, VOUT = 5 V, and 700 mA load, the LT1129IQ dissipates approximately 13.3 W. The DDPAK-5 package requires substantial copper area or a heatsink to keep junction temperature within the 125 °C operating limit. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
LT1185CQ - 3A Low Dropout Regulator, Adjustable, DDPAK-5 | Analog Devices
The Analog Devices LT1185CQ is a 3A low-dropout (LDO) linear regulator with adjustable current limit and remote sense capability, housed in a 5-pin DDPAK surface-mount package. It features 2.5V to 25V adjustable output range, ±1% reference accuracy, 0.25 ohm pass transistor, and can be configured as either a positive regulator with floating input or a standard negative regulator with grounded input. An LDO (low-dropout) linear regulator is a type of voltage regulator that maintains a stable output voltage even when the input voltage approaches the output voltage. LDOs sit within the broader hierarchy: LDO -> linear regulator -> voltage regulator -> power management IC -> semiconductor. The LT1185 belongs to the NPN-pass-transistor family, where a saturation-limited NPN device is used as the pass element - this trades efficiency for very low dropout voltage compared to PNP designs. Key specifications include 3A continuous output current, 0.25 ohm on-resistance of the internal pass transistor, 2.5mA typical quiescent current, programmable current limit, and full remote sense capability for accurate regulation at the load. The device also offers a shutdown pin for power sequencing, internal 1.25V reference, and good high-frequency ripple rejection. The DDPAK-5 (TO-263 style) package with tab provides low thermal resistance for high-current dissipation. The LT1185 uses a bipolar architecture with the saturation-limited NPN pass transistor. This topology yields very low dropout (input-to-output differential) while providing robust current-limit behavior. The reference is trimmed to ±1%, and the current-limit comparator can be programmed with a single external resistor, allowing the designer to optimize protection for the load and the pass transistor under fault conditions. Typical applications include post-regulation for switching converters (where the LDO cleans up switching ripple), industrial 24V-bus regulation, high-current instrumentation supplies, and negative-rail regulation in telecom systems. The wide input range supports automotive and industrial transients, while the remote-sense pins eliminate IR drops in long PCB traces. When designing with the LT1185, account for the 2.5mA quiescent current that flows even at no-load - this impacts battery-powered applications. The remote-sense pins must be tied directly to the load for best accuracy; do not leave them disconnected. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
LT1236ACS8-5 - 5V Precision Buried Zener Reference | Analog Devices
The Analog Devices LT1236ACS8-5 is a precision, low-noise buried-Zener voltage reference delivering a fixed 5.000 V output with ±0.05% initial accuracy and 10 mA of source/sink capability in an 8-pin SOIC package. The device combines ultralow drift, low wideband noise and excellent long-term stability without using on-chip heaters, making it a drop-in upgrade for legacy 5 V references such as the LT1021-5 and AD586 family. What is a buried-Zener voltage reference? A buried-Zener reference uses a subsurface avalanche breakdown junction rather than a bandgap or surface Zener. The subsurface architecture eliminates surface breakdown noise and stability problems, and delivers better temperature drift and time stability than even the best bandgap references. In the power-management IC hierarchy, voltage references sit alongside LDO regulators, supervisors and ADC/DAC converters, providing the precision DC anchor that every high-accuracy analog signal chain requires. Key specifications include 5 ppm/°C maximum temperature coefficient (C-grade), 4 ppm p-p noise (0.1 Hz to 10 Hz), 1.5 µVrms wideband noise, ±0.05% initial accuracy, 10 mA output current with source/sink capability, and 7.2 V to 40 V supply range. The LT1236 series is also nearly immune to input voltage variations due to its high PSRR. Architecturally, the LT1236 uses an on-chip buried-Zener diode, a temperature-compensation network, and a buffered output stage capable of both sourcing and sinking current. The dual output-capable topology allows the 10 V variant to operate as a shunt regulator (two-terminal Zener) with the same precision specifications, while the 5 V variant operates as a series reference with VIN headroom of 7.2 V minimum. Typical applications include high-resolution 16-/18-bit ADC and DAC reference inputs, precision instrumentation and digital multimeters, industrial process control loops, weigh scales and strain-gauge bridges, and precision voltage regulators. Designers also use it as a system-wide calibration reference in test-and-measurement equipment. When designing with the LT1236ACS8-5, respect the 7.2 V minimum supply and use a 1 µF to 10 µF output capacitor close to the VOUT pin for stability. Decouple VIN with 0.1 µF in parallel with 1 µF, keep trace capacitance on the noise-reduction (NR) pin minimal, and avoid sinking more than 10 mA continuously to prevent self-heating drift. This page synthesizes Analog Devices datasheet specifications, distributor pricing, drop-in cross-references and practical PCB design notes that are not found in the standalone manufacturer datasheet PDF, giving engineers a single source for selection, sourcing and board-level implementation.
LT1248CS#PBF - PFC Controller, 300 kHz, 16-SOIC | Analog Devices
The Analog Devices LT1248CS#PBF is a fixed-frequency current-averaging Power Factor Correction (PFC) controller IC housed in a 16-pin SOIC package, optimized for universal off-line power systems operating from rectified 85 VAC to 265 VAC mains. It delivers up to 300 kHz switching frequency with an adjustable oscillator, supports a wide 11.5 V to 25 V supply range, and provides active PFC with low-distortion AC line-current shaping for SMPS front ends. A Power Factor Correction (PFC) controller is a specialized analog/mixed-signal IC that conditions the input current drawn from the AC mains so that it is in phase with the input voltage, presenting a near-unity power factor to the utility. Within the broader power-management hierarchy, PFC controllers sit between the rectifier bridge and the bulk capacitor, preceding the downstream DC-DC converter. The LT1248 uses fixed high-frequency PWM current averaging (rather than peak-current detection or zero-current switching), eliminating slope-compensation requirements and enabling smaller magnetic components with lower line-current distortion across both continuous and discontinuous conduction modes. Key features include 8.5 mA typical supply current, a 96% maximum duty cycle, an internal 11.5 V undervoltage-lockout (UVLO) threshold, and built-in protection for overcurrent and soft-start sequencing. The current-averaging loop eliminates the subharmonic instabilities that plague peak-current-mode PFC stages, and the device maintains <5% THD in well-designed 100 W to >1 kW boost converters. The 16-lead SOIC (wide-body, S16 package) footprint is the industry-standard pinout for legacy PFC controllers. Typical applications include PFC front stages for desktop PC silver-box supplies, telecom rectifiers (48 V), industrial SMPS with EN61000-3-2 compliance, and high-end audio amplifiers. The wide 300 kHz capability allows the use of small ferrite boost inductors versus legacy 50 kHz iron-powder designs, reducing overall converter size and weight. Design with the LT1248 by ensuring Vsense feedback compensation is tuned for the chosen inductor and output voltage. The Vc-to-Imo gain sets the current-loop crossover; design for a crossover of roughly one-tenth of the switching frequency to avoid line-frequency harmonic distortion. Use a 1 nF to 10 nF soft-start capacitor to limit inrush. This page synthesizes verified distributor pricing, datasheet-derived parametric values, drop-in pin-compatible alternates, and design notes beyond the manufacturer datasheet, helping power engineers evaluate, source, and lay out an LT1248-based PFC stage.
LT1248IS#PBF - PFC Controller, 300kHz Average Current, 16-SOIC | Analog Devices
The Analog Devices (formerly Linear Technology) LT1248IS#PBF is an active power factor correction (PFC) controller IC that uses fixed high-frequency PWM current averaging and operates at up to 300 kHz switching frequency, housed in a 16-pin SOIC narrow-body package. Headline parameters include a 15.5 V to 27 V supply range, 250 µA typical startup current, and an internal 11.5 V lockout threshold for safe bootstrap supply design in offline converters. A PFC (Power Factor Correction) controller is a power management IC that shapes the input current of an AC-DC power supply so that it is in phase with and proportional to the AC line voltage, forcing the load presented to the utility to look resistive. Active PFC controllers such as the LT1248 are part of the broader AC-DC controller family, which also includes PWM controllers and current-mode controllers; together they form a key segment of the power management IC market. Active PFC has largely displaced passive PFC in switched-mode power supplies above ~75 W because it achieves near-unity power factor with smaller magnetics. Key features include average-current-mode control (which eliminates the slope-compensation burden imposed by peak-current controllers), instantaneous overvoltage protection, high power factor across a wide load range, and a minimum/maximum frequency clamp architecture. The 300 kHz capability permits smaller boost inductors and EMI filters compared to legacy 100 kHz PFC designs. The part is intended for universal off-line input (85 VAC to 265 VAC) and supports both continuous-conduction-mode (CCM) and discontinuous-conduction-mode (DCM) operation without topology change. Typical applications include 100 W to >1 kW AC-DC switched-mode power supplies that must comply with EN61000-3-2 harmonic-current limits, industrial SMPS for motor drives, telecom rectifier front ends, server and workstation power supplies, and high-end audio amplifiers with PFC front ends. The wide bandwidth of the current loop simplifies magnetics design and yields a smaller inductor than competitive peak-current or zero-current-switching approaches. When designing with this device, ensure the VCC bypass capacitor and the current-sense filter network follow the values given in the typical application circuit; the IS pin input range and the VAUX bootstrap supply must be sized so that VCC never collapses below the 11.5 V UVLO threshold during line dropouts. A 1% tolerance multiplier resistor on the MULT pin is recommended to keep THD within regulatory limits across line and load. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineering context beyond the bare part number. Engineers can use this document to evaluate pin-compatible replacements, estimate junction temperature under CCM boost operation, and select an EMI filter that complies with EN55022 Class B given the chosen switching frequency.
LT1374CR - 4.5A 500kHz Buck Switch Reg | Analog Devices
The Analog Devices LT1374CR is a 500 kHz monolithic buck-mode switching regulator that integrates a 4.5 A internal power switch together with the oscillator, control logic and protection circuitry on a single die. Housed in a 7-lead TO-263 (DDPAK) package with thermal tab, it accepts a 5 V to 25 V input range and delivers an adjustable output from 2.42 V to 21.5 V, making it a true drop-in successor to the classic Linear Technology LT1074/LT1076 family of high-current step-down regulators. A buck (step-down) switching regulator is a switched-mode DC-DC converter that uses an inductor, a power switch, and a rectifier to transfer energy from a higher input rail to a lower output rail at high efficiency. The LT1374CR belongs to the broader hierarchy of voltage regulators -> DC-DC converters -> switching regulators -> power management ICs. The 500 kHz constant switching frequency permits a small 1.8 µH saturating inductor and all-ceramic input/output capacitors, simplifying the bill of materials and shrinking the solution footprint compared to 100-200 kHz predecessors. Key features include a 0.07 ohm saturating internal NPN switch for low dropout loss, 2.5 mA quiescent supply current, 20 µA shutdown current, current-mode topology for fast transient response and good loop stability, and full cycle-by-cycle short-circuit protection. The device is offered in both fixed 5 V output (LT1374CR-5) and adjustable (LT1374CR) versions, with optional shutdown/synchronization via the LT1374CR-SYNC variant. The exposed thermal tab provides a low theta-JA path to dissipate up to several watts at full 4.5 A load. The current-mode architecture samples inductor current each cycle and feeds it into a PWM comparator against the error amplifier output, giving inherent line-rejection and a single-pole compensation network. Synchronization to an external 600 kHz clock is supported on SYNC parts, allowing multiple regulators to phase-lock and reduce input RMS ripple. Thermal shutdown and cycle-by-cycle current limiting protect against output shorts and overload conditions, while the wide 5 V to 25 V VIN range covers 12 V and 24 V industrial bus rails without a preregulator. Typical applications include 5 V to 12 V distributed power systems, industrial 24 V bus converters, automotive accessory power (with appropriate transient protection), battery chargers, and distributed point-of-load regulation for FPGAs, DSPs, and microcontrollers. A high-current variant such as the LT1374CR is especially valuable where a discrete switching controller plus external MOSFET would otherwise occupy too much PCB area. When laying out the LT1374CR, keep the input ceramic bypass capacitor within 5 mm of the VIN pin, use a low-ESR inductor rated for 5 A saturation, and connect the exposed tab to a 1 square-inch copper pour for thermal relief. Watch the maximum VIN rating of 25 V and provide a TVS or fuse for inductive load transients on industrial rails. SYNC and fixed-5-variants share the same 7-pin DDPAK footprint for PCB reuse. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving procurement engineers and designers a single source for LT1374CR decisions.
LT1461CIS8-5 - 5V 100mA Micropower LDO Voltage Reference | ADI
The Analog Devices LT1461CIS8-5 is a fixed 5V output, micropower precision low-dropout series voltage reference IC delivering up to 100 mA of output drive in an 8-pin SOIC package. It combines ±0.08% initial accuracy with low temperature drift and draws only 35 µA of quiescent supply current, making it ideal for battery-powered and precision instrumentation designs. A series voltage reference is a three-terminal device that maintains a stable, temperature-independent output voltage independent of supply, load, and temperature variations. It sits at the bottom of the power management hierarchy, below linear regulators and DC-DC converters, and serves as the precision voltage anchor for ADCs, DACs, and precision data-acquisition systems. Voltage references are characterized by initial accuracy (error at 25 °C), temperature coefficient (drift in ppm/°C), long-term stability, noise density, and load/line regulation. Key specifications of the LT1461CIS8-5 include ±0.08% initial output accuracy (max), a low dropout of approximately 0.45 V at 100 mA load, 35 µA quiescent current, and high output drive capable of sourcing 100 mA continuously. Curvature-compensated bandgap architecture and trimmed thin-film resistors achieve the headline accuracy without external calibration, while the wide input supply range supports single-cell Li-Ion to industrial 24 V bus operation with adequate headroom. The LT1461 uses advanced curvature-compensated bandgap architecture with precision-trimmed thin-film resistors. This topology eliminates the typical parabolic temperature error of uncompensated bandgap references, resulting in low drift over the full industrial temperature range. The high output drive and low supply current are unusual to find together, and the device's tight line/load regulation keep the 5V reference stable under dynamic load transients. Typical applications include precision ADC and DAC reference inputs, industrial process control loop references, battery-powered instrumentation, portable data loggers, and automotive sensor signal conditioning. Its 100 mA drive also allows it to directly power multiple low-current analog rails in distributed measurement systems. When designing with this device, ensure the input supply provides at least 0.45 V of dropout headroom above 5 V under worst-case load. A 0.1 µF to 1 µF ceramic bypass capacitor placed close to the supply pin and a 1 µF to 10 µF output capacitor are recommended to ensure stability and to minimize load-transient ringing. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in any single manufacturer datasheet, giving engineers a single source to evaluate the LT1461CIS8-5 for new designs and as a drop-in replacement on existing PCBs.
LT1461DHS8-5#PBF - 5V Micropower Precision LDO Voltage Reference | Analog Devices
The Analog Devices LT1461DHS8-5#PBF is a fixed 5 V, micropower precision low-dropout series voltage reference in an 8-pin NSOIC-8 (SOIC-8) surface-mount package, combining ±0.15% initial accuracy with low drift and 50 mA minimum output drive. It is part of the LT1461 series of band-gap references that use advanced curvature compensation and precision thin-film resistors to deliver trimmed high output accuracy. The "#PBF" suffix designates a lead-free, RoHS-compliant termination finish supplied on a tube. A voltage reference IC is a precision circuit that produces a stable, known DC voltage used as an absolute reference for ADCs, DACs, power supplies, and sensor signal-conditioning paths. Within the power management IC family, series-mode references are preferred over shunt references when the load current varies, because the regulator absorbs the difference between input and load current and rejects upstream supply noise. The LT1461 family targets micropower systems that require tight initial accuracy without the quiescent-current penalty of larger references. Key specifications include a maximum temperature coefficient of 20 ppm/°C, 0.15% maximum initial accuracy, 50 µA maximum supply current, and 50 mA minimum source current with low dropout operation. The series reference architecture supports output drive and sink capability, and the 8-pin SOIC-8 package provides a familiar footprint that simplifies PCB layout. The shutdown pin (pin 3) reduces quiescent current to <10 µA when pulled low, enabling power-sequenced systems to disable the reference. The internal band-gap core combined with curvature compensation and laser-trimmed thin-film resistors yields a temperature coefficient that is held to 20 ppm/°C maximum over the full -40 °C to +125 °C operating range. The low 35 µA typical quiescent current extends battery life in portable instruments, while the 50 mA output drive allows the reference to power multiple ADC/DAC channels or precision analog blocks directly without buffering. Typical applications include precision data-acquisition system references, 16-bit and 18-bit ADC/DAC voltage rails, industrial process-control transmitters, battery-powered handheld test equipment, and medical instrumentation front-ends. Designers use the LT1461DHS8-5 when a 5 V reference must be derived from a higher system rail such as 12 V or 15 V with high PSRR to upstream noise. Designers should place a 0.1 µF bypass capacitor close to the input and a 1 µF to 10 µF low-ESR capacitor on the output to maintain stability and minimize load-transient response. The shutdown pin must be tied to VIN or left floating for normal operation; leaving it grounded disables the reference. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in a single manufacturer datasheet, providing an at-a-glance comparison to help engineers select between the LT1461DHS8-5 and competing 5 V references.
LT1511CS8#PBF - 3A Multi-Chemistry Battery Charger | Analog Devices
The LT1511CS8#PBF is a constant-current/constant-voltage (CC/CV) PWM battery charger IC from Analog Devices (formerly Linear Technology), designed to charge multi-chemistry batteries including Li-Ion, NiCd, NiMH, and Lead-Acid. It delivers up to 3A charge current with input current limiting, making it suitable for a wide range of portable and industrial charging applications. The device operates from input voltages up to 25V (28V absolute maximum per Newark) and supports battery charge voltages up to 20V, accommodating 1-3 series cells. It is available in an 8-pin SOIC package (CS8), which is a compact surface-mount option for space-constrained designs. A battery charger IC is a specialized power management integrated circuit that controls the charging process of rechargeable batteries, ensuring safety and longevity by regulating charge current and voltage. The LT1511 belongs to the family of switch-mode battery chargers, which use a PWM (pulse-width modulation) topology to efficiently convert input power to the battery. This places it within the broader hierarchy of power management ICs, specifically under battery management and charging solutions. Unlike linear chargers, switch-mode chargers like the LT1511 offer higher efficiency, especially when the input voltage is significantly higher than the battery voltage, reducing heat dissipation and enabling faster charging. Key features of the LT1511CS8#PBF include its constant-current/constant-voltage charging algorithm, which is essential for Li-Ion batteries that require a controlled current phase followed by a constant voltage phase. The input current limiting feature allows the charger to draw a maximum current from the input supply, preventing overloading of wall adapters or USB ports. The device also includes a sense resistor for accurate current sensing and a programmable charge current via an external resistor. The 8-pin SOIC package provides a small footprint, and the device operates over a commercial temperature range of 0°C to 70°C. Technically, the LT1511 uses a current-mode PWM architecture, which provides excellent line and load regulation. The switching frequency is internally set, and the device includes a shutdown pin for power management. The charger can be configured for different battery chemistries by adjusting the external components, such as the sense resistor and voltage divider. The input current limiting is particularly useful in applications where the input source has a limited current capability, such as a USB port or a solar panel. Typical applications include portable devices, power tools, medical equipment, and industrial battery backup systems. The LT1511 is also suitable for charging lead-acid batteries in automotive and UPS applications, where its robust input voltage range and current limiting are advantageous. When designing with this device, it is important to select the appropriate sense resistor and inductor for the desired charge current and switching frequency, and to ensure proper thermal management, as the power dissipation in the IC can be significant at high charge currents.
LT1511CS8#TRPBF - 3A Battery Charger IC | Analog Devices
The LT1511CS8#TRPBF is a constant-current/constant-voltage battery charger IC from Analog Devices, designed for multi-chemistry battery charging applications. It delivers up to 3A of charge current with input current limiting, making it suitable for a wide range of portable and industrial devices. The device operates from a 4.5V to 30V input voltage range and features a programmable charge current, making it flexible for various battery configurations. A battery charger IC is a specialized power management integrated circuit that controls the charging of rechargeable batteries, ensuring safe and efficient charging by regulating voltage and current. The LT1511CS8#TRPBF belongs to the category of linear battery chargers, which are part of the broader power management IC family. These devices are essential in applications where battery life and safety are critical, such as in portable electronics, medical devices, and industrial equipment. Key features of the LT1511CS8#TRPBF include a 3A maximum charge current, constant-current/constant-voltage charging algorithm, and input current limiting. The device also includes a precision reference for accurate voltage regulation and a low-dropout design that maximizes charging efficiency. The SOIC-8 package provides a compact footprint, ideal for space-constrained designs. The LT1511CS8#TRPBF uses a linear charging topology, which offers simplicity and low noise compared to switching chargers. It includes thermal regulation to prevent overheating, and its input current limiting feature allows operation from limited-power sources such as USB ports. The device is designed for reliable operation over a wide temperature range, making it suitable for demanding environments. Typical applications include portable devices, battery-powered tools, and industrial battery charging systems. The LT1511CS8#TRPBF is particularly well-suited for applications requiring a simple, cost-effective charging solution with high reliability. When designing with this device, ensure proper thermal management by providing adequate PCB copper area for heat dissipation, especially at high charge currents. The input current limiting feature should be configured to match the capabilities of the power source to avoid overloading.
LT1579CS-5#PBF - 300mA Dual-Input Smart Battery Backup LDO | ADI
The Analog Devices LT1579CS-5#PBF is a dual-input, single-output low-dropout (LDO) linear regulator designed to provide an uninterruptible 5V output from two independent input voltage sources on a priority basis. Housed in a 16-lead SOIC-N (S) package with a fixed 5V output, it supplies up to 300 mA of load current at a typical dropout of 400 mV, draws only 50 µA of quiescent current in operation and drops to 7 µA in shutdown. Two on-chip comparators monitor each input's status while two open-drain status flags (STAT1/STAT2) indicate which source is supplying power and provide early warning of imminent output collapse. An LDO (Low-Dropout) linear regulator is a type of voltage regulator that maintains a stable output voltage even when the input-to-output differential is small — the 'dropout' voltage is the minimum headroom required to keep regulation intact. The LT1579 sits within the broader hierarchy of linear regulators -> voltage regulators -> power management ICs -> semiconductor devices, and the dual-input smart-battery variant targets any system that must remain alive across a primary/backup power handover (USB ↔ Li-Ion, wall adapter ↔ supercap, mains ↔ battery). Key features of the LT1579CS-5#PBF include seamless automatic input switching without glitches, low 50 µA quiescent current (7 µA in shutdown) for battery-life extension, fixed 5V output with ±3% tolerance, integrated reverse-current blocking between the two inputs, and a secondary select pin (S2) that lets designers force a specific input as the priority source. The SOIC-16 narrow-body package provides a manageable footprint while the exposed thermal path supports continuous 300 mA delivery at moderate ambient temperatures. Architecturally the LT1579 combines a precision bandgap reference, two PNP-style pass elements arranged in a diode-OR topology, integrated MOSFET switch control, and the dual-comparator supervisor block. This integrated approach eliminates the discrete FETs, Schottky diodes, supervisor ICs, and sequencer glue logic that a discrete dual-rail ORing solution would otherwise require, reducing both PCB area and BOM cost. Typical applications include battery backup for SRAM/real-time-clock supplies in meters and data loggers, USB/AC-wall-adapter power handover in portable instrumentation, supercap-backed ride-through for PLC and industrial controllers, uninterruptible supplies for microcontrollers and security sensors, and load-sharing between solar harvest and battery in remote telemetry nodes. When designing with the LT1579CS-5#PBF, observe the 400 mV dropout rating and select input capacitance (≥10 µF low-ESR) and output capacitance (≥10 µF low-ESR, no minimum ESR window required) per the datasheet to guarantee stability across the full 0 to 300 mA load range. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
LT1680CN - 60V Boost DC/DC Controller, 16-PDIP | Analog Devices
The Analog Devices LT1680CN is a high-power, current-mode switching power supply controller optimized for boost (step-up) topologies, housed in a 16-pin PDIP through-hole package. It drives an external N-channel MOSFET switch, supports input voltages from 4V to 60V, and switches at a maximum frequency of 200 kHz with a 90% maximum duty cycle. The high-current gate driver can handle up to 10,000 pF of MOSFET gate capacitance, enabling very high power DC/DC converter designs. A switching controller IC (often called a PWM controller or DC-DC controller) is the brain of an external-MOSFET switched-mode power supply. Unlike a fully integrated switching regulator that contains the power switch on-die, a controller relies on an external MOSFET (or GaN/IGBT) to handle the actual current. This split lets the designer pick the switch technology for a target current/voltage, while the controller IC provides the regulation loop, gate drive, current sensing, and protection. The LT1680 sits in the linear regulator / voltage regulator / power management IC hierarchy under Analog Devices' Power Management portfolio. The LT1680CN's headline features are: 60V input operation, fixed-frequency current-mode control, 10,000 pF gate-drive capability, programmable average current limiting, and a 5V reference output capable of sourcing 10 mA externally. Current-sense common-mode range extends to 60V, so the part can directly sense current in a high-side N-MOSFET boost converter without level-shifting tricks. These specs make it one of the few controller ICs in this package class that can drive high-voltage, high-current boost stages directly. Architecturally, the LT1680 uses a current-mode PWM core with a high-side or low-side current sense, a 5V internal reference, an internal oscillator, and a high-current gate driver. The current-mode control provides inherent cycle-by-cycle current limiting and simplifies feedback compensation by treating the inductor as a current source. The high-voltage input tolerance is achieved with a robust high-V process and on-chip ESD structures rated for the full 60V input. Typical applications include automotive 12V-to-24V/48V boost converters, telecom -48V distribution, industrial 24V step-up supplies, and high-power battery charging. The wide 4V-60V input range makes it compatible with nominal 12V, 24V, 36V, and 48V buses after transient headroom. The 5V/10mA reference can bias housekeeping circuits in the same converter. When designing with this part, keep the gate-drive loop short: the LT1680 can charge 10,000 pF quickly, and any trace inductance between the GATE pin and the MOSFET gate will ring. Use a local gate resistor (10-47 ohm) to damp the loop, and place input ceramic bypass as close to the VIN pin as possible. Estimated: at 200 kHz with 10 nF effective gate capacitance, gate-drive losses alone can reach ~20 mW per MOSFET, so thermal management of the MOSFET (not the controller) is usually the design-limiting factor. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical PCB/thermal design notes not collated in the manufacturer datasheet alone.
LT1761ES5-3.3 - 100mA, 3.3V LDO Micropower Regulator | Analog Devices
The Analog Devices LT1761ES5-3.3 is a fixed 3.3V output, 100 mA micropower low-dropout (LDO) linear regulator in a 5-pin TSOT-23 (S5) package. It accepts input voltages up to 20V, exhibits a low 300 mV dropout at full 100 mA load, and features 20 µV RMS output noise when used with an external 0.01 µF bypass capacitor. Quiescent current is rated at 20 µA typical, dropping below 0.1 µA in shutdown, making it ideal for battery-powered systems. An LDO (Low-Dropout) linear regulator is a type of linear voltage regulator that maintains a stable output voltage even when the input voltage is only marginally higher than the output. Within the broader hierarchy, an LDO is a subcategory of linear regulators, which themselves are a subcategory of voltage regulators, themselves part of the power management integrated circuit (PMIC) family. LDOs are favored in noise-sensitive applications because they do not introduce switching ripple into the output rail, unlike DC-DC converters. Key features of the LT1761ES5-3.3 include a wide 1.8 V to 20 V input range, ±1% output voltage accuracy (over line, load, and temperature), internal protection circuitry (reverse-battery, reverse-current, current limit, and thermal shutdown), and a logic-controlled SHDN pin. With a 0.01 µF bypass capacitor on the BYP pin, output spectral noise density falls to under 20 µV RMS across the 10 Hz to 100 kHz audio band, which is significant for handheld instrumentation. The LT1761 architecture uses a PNP pass transistor that allows the regulator to operate with very low dropout and to handle input voltages well above the output. Internal protection includes constant-current current limiting, safe-area protection for the pass element, and thermal shutdown that engages at approximately 145°C junction temperature. The device is stable with small ceramic output capacitors (1 µF or larger), simplifying PCB layout in space-constrained designs. Typical applications include battery-powered handheld instruments, wireless sensor nodes, cellular phone power management, and post-regulation after a switching converter. Its low quiescent current and low noise make it especially well suited for single-cell Li-Ion and two-cell AA/AAA battery stacks where efficiency at light load is critical. When designing with the LT1761ES5-3.3, place the 0.01 µF BYP bypass capacitor as close as possible to the BYP pin to realize the specified 20 µV RMS noise performance. Use a low-ESR ceramic output capacitor of at least 1 µF (X5R or X7R) for output stability. Do not leave the SHDN pin floating; tie it to IN or drive it with a logic signal. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not aggregated in any single manufacturer datasheet, helping engineers evaluate the LT1761ES5-3.3 for both new designs and legacy replacements.
LT1763CS8-3.3#TRPBF - 3.3V 500mA Low-Noise LDO | Analog Devices
The Analog Devices LT1763CS8-3.3#TRPBF is a fixed 3.3V, 500mA low-dropout linear regulator in an 8-lead SOIC package, with low-noise and micropower characteristics for sensitive battery-powered and signal-chain applications. It is designed to supply stable positive output current up to 500mA and is identified by the verified distributor and manufacturer data as an LT1763-family part. An LDO is a linear regulator that maintains a relatively stable output voltage while dissipating power as the difference between input and output voltage multiplied by load current. Compared with a switching regulator, an LDO generally offers simpler control and lower switching-related noise, making the LT1763 suitable for RF systems, battery-powered equipment, low-noise analog supplies, and communication circuits. The LT1763 family also includes fixed outputs from 1.5V through 5V and an adjustable version with a 1.22V reference voltage. Key verified features include a 500mA output-current capability, a 300mV dropout voltage, and low 30uA quiescent current. The 3.3V fixed-output suffix identifies the target rail, while the CS8 package designation identifies the 8-lead SOIC form used by the distributor listings. The low quiescent current is particularly useful when the regulator is expected to consume little power during unloaded or lightly loaded battery operation. The LT1763 series is described by the manufacturer as a micropower, low-noise, low-dropout regulator family. Its architecture is intended to provide regulation close to the load, which can help reduce supply perturbations in RF and precision analog systems. The family data identifies 8-lead SO and 12-lead DFN package options, while this particular orderable MPN is listed in 8-SO packaging. Typical uses include RF systems, battery-powered products, communications equipment, sensor interfaces, and analog signal-conditioning circuits requiring a 3.3V rail. When selecting the device, verify the complete manufacturer electrical characteristics, including input-voltage limits, output accuracy, noise, stability, current limit, thermal behavior, and capacitor requirements. The verified web data provides the principal identity, output voltage, current rating, package family, dropout, and quiescent-current facts; additional detailed limits are marked where not supplied. For implementation, place the regulator close to the load and follow the manufacturer datasheet recommendations for input and output capacitors, layout, and thermal management. The low 30uA quiescent current is a useful advantage in portable systems, but the final power budget must include regulator dissipation and load-dependent behavior. This page combines verified manufacturer and distributor information with application guidance and identifies where additional datasheet values are needed.
LT1790BCS6-5 - 5V Micropower SOT-23 Voltage Reference | Analog Devices
The Analog Devices LT1790BCS6-5 is a fixed 5V output, micropower low-dropout (LDO) series voltage reference in a 6-pin TSOT-23 (S6) package. The 'B' grade delivers ±0.1% initial output accuracy with a low temperature coefficient of 25 ppm/°C and an output current capability of up to 5 mA, making it one of the most accurate small-package references in the LT1790 family. A voltage reference IC is a precision circuit that produces a stable, temperature-independent DC voltage used as a calibration anchor for ADCs, DACs, power-supply monitors, and sensor signal-conditioning paths. Within the power-management hierarchy, references sit alongside voltage regulators and supervisors, providing the absolute voltage standard against which other rails are measured. The LT1790 family combines a buried-Zener or bandgap-style core with curvature compensation and trimmed precision thin-film resistors to deliver low drift, low noise, and very low quiescent current in a footprint compatible with portable and space-constrained designs. Key features of the LT1790BCS6-5 include a low dropout voltage suitable for low-headroom rails, a supply current typically under 60 µA, low output noise, and reverse-battery protection. The 'B' grade's 25 ppm/°C drift makes it well suited to instrumentation that must hold calibration across temperature swings without an external chopper amplifier. Because each part is post-package trimmed, the as-shipped accuracy specification is guaranteed without user adjustment, simplifying factory calibration steps in high-volume builds. Typical applications include precision ADC and DAC reference rails, industrial process-control signal chains, battery-powered instrumentation, automotive sensor modules, and portable medical devices. Designers also use the LT1790BCS6-5 as a stable bias source for precision current loops and as a low-cost upgrade for legacy 5V reference designs that need tighter initial accuracy and better long-term stability. A key design consideration is output-capacitor selection. The TSOT-23 part requires careful bypassing close to the output pin to maintain phase margin, and the load current must remain inside the 5 mA envelope to preserve regulation and temperature performance. A short, low-ESR trace from the reference to the load pin reduces dynamic error when the load is an ADC reference input. This page synthesizes verified distributor pricing, pin-compatible SOT-23 reference alternatives, and application-specific design guidance not present in the standalone Analog Devices datasheet.
LT1910ES8 - 48V High-Side N-FET Driver, 8-SO | Analog Devices
The Analog Devices LT1910ES8 is a protected high-side N-channel MOSFET gate driver in an 8-pin SOIC (S8) package with an integrated charge pump, programmable current limit, short-circuit protection, automatic restart timer, and open-collector fault flag. It operates from an 8 V to 48 V supply and tolerates load-dump transients up to 60 V, allowing the use of low-cost N-channel MOSFETs in high-side switching topologies. The internal charge pump delivers the gate voltage needed to fully enhance the external N-FET without external components. A high-side gate driver is a semiconductor circuit that level-shifts a low-side logic control signal to drive the gate of an N-channel MOSFET placed on the high side of a load, between the supply rail and the load. The category hierarchy is gate driver -> power management IC -> semiconductor. By using an N-channel MOSFET on the high side, designers achieve lower R_DS(on) and lower cost than an equivalent P-channel MOSFET. The LT1910ES8 belongs to this gate-driver product family, with the broader function of switching and protecting DC loads in automotive, industrial, and telecom systems. Key features include an on-chip drain-current comparator that turns off the switch if load current exceeds a preset threshold, programmable delay and autorestart timing set by an external RC network, and a FAULT pin that asserts when the part enters protection. The internal charge pump maintains V_GS above the MOSFET threshold even at 100% duty cycle. Supply current is typically under 4 mA in normal switching and falls to a low microamp level in fault/shutdown. The architecture combines a 48 V-rated DMOS charge-pump switcher, a precision sense comparator, and timing logic in a monolithic die. The integrated design eliminates the external boost capacitor and gate-drive resistor network that discrete high-side drivers require, simplifying PCB layout and reducing BOM cost by typically 4-6 components. Typical applications include automotive load switching (lamps, solenoids, motors), industrial 24 V-48 V control, hot-swap / inrush limiting on plug-in cards, and battery protection in UPS and telecom -48 V systems. The device is especially suited to 12 V and 24 V automotive environments where inductive load transients and reverse-battery events are routine. When designing with this part, place the SENSE resistor between SENSE and VIN using a low-inductance layout, and keep the RG/RT timing network close to the TIMER pin. The FAULT output is open-collector and requires a pull-up resistor to logic supply. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the LT1910ES8 that are not found in the standalone manufacturer datasheet.
LT1931AIS5#TRPBF - 2.2MHz Inverting 1A DC/DC Converter | ADI
The Analog Devices LT1931AIS5#TRPBF is a 2.2 MHz current-mode inverting DC/DC converter in a ThinSOT-23-5 (TSOT-23-5) package with integrated 1 A switch, designed to generate negative output voltages from a positive input rail. It delivers up to -34 V output at 1 A switch current from a 2.45 V to 16 V input range, with very low output ripple of 1 mV P-P at -5 V / 150 mA from a 5 V input. A DC/DC switching regulator (also called a switch-mode converter or SMPS) is an electronic circuit that uses energy storage elements (inductors, capacitors) and high-frequency switching to convert one DC voltage to another with high efficiency (typically 85-95%) versus a linear regulator. The inverting topology (often implemented as a Cuk or buck-boost variant) flips the polarity of the input voltage - so a +5 V input becomes -5 V at the output - using a single inductor and coupling capacitor. Inverting converters sit in the power management IC hierarchy alongside buck, boost, and SEPIC converters, all feeding downstream analog and mixed-signal systems. Key features include 2.2 MHz fixed-frequency operation (A suffix), 1 A integrated power switch, wide 2.45 V to 16 V input range, low output ripple, and the ability to use tiny surface-mount components 2 mm or less in height. The ThinSOT-23-5 footprint enables compact designs while the 2.2 MHz switching frequency keeps the converter above the AM broadcast band and outside common 455 kHz IF stages, simplifying EMI filtering. Technically, the LT1931A uses constant-frequency current-mode control for clean loop compensation and fast transient behavior. The high-side 1 A switch supports high peak inductor currents needed to deliver hundreds of mA at voltages from -5 V down to -34 V. Compared to charge-pump negative regulators, the LT1931A delivers much higher output current and supports higher power levels without the source-current spikes that couple back into the input rail. Typical applications include negative bias supplies for op-amps and LCD panels, portable instrumentation, GaN and SiC gate-driver negative rails, automotive sensor interfaces, and industrial analog front-ends. The wide input range also makes it suitable for 12 V bus systems and battery-powered equipment where a small, hot-rail-tolerant negative rail is required. When designing with the LT1931A, select a Schottky catch diode with low reverse leakage and adequate voltage margin (30 V or more for high-Vout designs), and use ceramic input/output capacitors rated for the peak currents seen in Cuk topology. The exposed backside thermal pad of the ThinSOT helps dissipate the 1 A switch losses, but the small footprint limits continuous output to a few hundred mA without airflow. This page consolidates distributor pricing (DigiKey, Mouser, LCSC), verified same-family drop-in alternatives (LT1931AIS5#TRMPBF, LT1931AES5#TRPBF), and practical design notes not found in the standalone datasheet.
LT1933HDCB - 600mA, 36V Buck Regulator | Analog Devices
The Analog Devices LT1933HDCB is a 600 mA, 500 kHz constant-frequency current-mode PWM step-down DC/DC converter with an internal 750 mA power switch, packaged in a 6-lead DFN (2 mm x 3 mm) with an exposed thermal pad. It accepts a wide 3.6 V to 36 V input range, delivers an adjustable output as low as 1.245 V, and runs at a fixed 500 kHz switching frequency that allows small inductor and ceramic-capacitor designs. According to the ADI datasheet, the part uses current-mode control for excellent line and load transient response and includes internal frequency compensation that simplifies loop design. A buck converter (step-down switching regulator) is a type of DC-DC converter that uses an internal power switch, an inductor, and a rectifying element to convert a higher DC input voltage to a lower DC output voltage at high efficiency. Buck regulators sit within the broader hierarchy of switched-mode power supplies (SMPS) and power management ICs, and they are preferred over linear regulators whenever the input-to-output voltage differential or load current would otherwise waste significant power as heat. The LT1933 family targets space-constrained applications that still require wide input range and high efficiency. Key features of the LT1933HDCB include a 36 V maximum input voltage, 600 mA continuous output current capability, 500 kHz fixed switching frequency, internal 750 mA power switch, internal current sensing, and a low shutdown current of less than 2 uA. The exposed-pad DFN package provides low thermal resistance so the device can deliver full output current across the -40 C to +125 C operating junction temperature range without an external heatsink in typical conditions. The device uses a constant-frequency current-mode architecture with slope compensation, an internal soft-start to limit inrush current, and an exposed thermal pad that acts as the electrical ground. Efficiency typically reaches 80-90 percent at moderate loads, and the high switching frequency allows the use of small ceramic input and output capacitors. The combination of wide VIN range and high switching frequency makes it well suited to battery-powered, industrial, and automotive-supplied loads. Typical applications include 12 V and 24 V industrial bus power conversion, distributed 5 V and 3.3 V rails for sensors and microcontrollers, battery-powered portable equipment, automotive infotainment and accessory power, and point-of-load regulation after a front-end switching converter. The wide VIN tolerance lets the same design survive cold-crank and load-dump transients on automotive supplies. When designing with the LT1933HDCB, follow the datasheet's recommended inductor and capacitor values to ensure stability and acceptable output ripple. Place the input capacitor as close as possible to the VIN and GND pins to minimize switching noise, and use sufficient copper area or thermal vias under the exposed pad to keep the junction temperature within the derating curve. This page synthesizes distributor pricing, drop-in alternative candidates from the same Analog Devices family, and practical design considerations not found in the manufacturer datasheet alone.
LT1933IDCB - 600mA 500kHz Step-Down Regulator | Analog Devices
The Analog Devices LT1933IDCB is a 600 mA, 500 kHz step-down switching regulator with a 3.6 V to 36 V input range, adjustable positive output referenced to 1.245 V, and a 6-lead WFDFN exposed-pad package. It is designed for compact power conversion where low profile, wide input range, and efficient current-mode PWM regulation are important. A step-down DC/DC converter, also called a buck converter, reduces a higher input voltage to a regulated lower voltage using an internal switching element, inductor, capacitor, and control loop. The LT1933 belongs to the switching-regulator family within the broader DC/DC converter and power-management semiconductor hierarchy. Its current-mode PWM architecture provides a practical solution for generating local rails from automotive, industrial, or distributed power systems. The LT1933 uses an internal 0.75 A power switch and is specified for a 600 mA output configuration. Its 500 kHz switching frequency supports a compact implementation with external passive components. The 6-lead DFN package reduces board area, while the exposed pad provides a thermal connection when copper area and heat dissipation are adequate. The adjustable output allows the design to select the required feedback divider rather than using a fixed-voltage version. The verified distributor data identifies the part as a positive adjustable buck regulator with a 1.245 V reference and a 600 mA output rating. The manufacturer search result describes the LT1933 family as a current-mode PWM step-down converter with an internal 0.75 A switch and a wide 3.6 V to 36 V input range. Additional electrical values, including efficiency curves, switching specifications, current-limit behavior, thermal resistance, and inductor recommendations, should be confirmed in the manufacturer datasheet before production release. Typical applications include point-of-load regulation, industrial control systems, automotive electronics, battery-powered equipment, and portable electronics. In these systems, the converter can create a lower, stable rail for sensors, communications circuitry, analog sections, or embedded controllers. Because a switching regulator introduces ripple and switching-node energy, layout and component selection are as important as the nominal voltage and current ratings. Use the exposed pad as a thermal and electrical connection according to the package land pattern, and keep the switching node compact and away from sensitive signal paths. Verify the maximum input voltage, duty-cycle limits, output-voltage accuracy, current-limit behavior, and capacitor ratings in the official datasheet. This page combines distributor data, manufacturer information, and practical design guidance for engineers evaluating a compact 600 mA buck regulator.
LT1976BEFE - 60V 1.5A 200kHz Step-Down Switching Regulator | Analog Devices
The Analog Devices LT1976BEFE is a 200 kHz monolithic step-down (buck) switching regulator that accepts input voltages up to 60V and delivers up to 1.2A of switch current from a 16-lead TSSOP-EP package. It integrates a high-efficiency 1.5A, 0.2 ohm internal power switch along with the oscillator and control logic required for a complete DC-DC converter, using current-mode topology for fast transient response and good loop stability. A buck (step-down) switching regulator is a type of switched-mode power supply (SMPS) that efficiently converts a higher DC input voltage to a lower DC output voltage by rapidly switching an inductor and using an LC output filter. Within the broader power management hierarchy, buck regulators sit below isolated converters and above linear regulators (LDOs) in efficiency versus noise trade-off. Buck regulators deliver far higher efficiency than LDOs when VIN is much greater than VOUT, making them the workhorse topology for industrial, automotive, and telecom rails. The LT1976B is the lower-quiescent-current variant of the LT1976 family, drawing only 100 microamps of quiescent current while operating, plus a micropower shutdown mode. It also adds a sync pin for oscillator synchronization to an external clock, while the standard LT1976 lacks the SYNC function. The wide 3.3V to 60V input range accommodates 5V, 12V, 24V, and 48V buses, and the adjustable output covers 1.25V to 54V using an external resistor divider. Current-mode control is used internally, which simplifies loop compensation and provides inherent cycle-by-cycle current limiting on the internal 1.5A switch. The exposed thermal pad (EP) on the TSSOP-16 package reduces junction-to-ambient thermal resistance and is required for proper operation at full load. Typical applications include 24V industrial bus regulation, battery-powered systems, automotive accessory power, distributed 5V and 12V rails, and isolated telecom supply post-regulators. The wide VIN range and 1.5A peak switch current let the LT1976BEFE replace discrete switcher designs with a single IC plus an inductor, catch diode, and a few ceramic bypass capacitors. Compared to linear regulators, it dissipates far less heat when stepping down from 24V or 48V rails. When designing with this part, keep the input capacitor close to the VIN and GND pins, choose an inductor rated for at least 1.5A saturation, and connect the exposed pad to a copper ground plane to meet the rated 0.2 ohm RDS-on at full load. This page synthesizes distributor pricing, drop-in same-package alternatives in the LT1976 family, and practical design notes not found in the manufacturer datasheet alone, helping engineers source, compare, and lay out the LT1976BEFE in one view.
LT3010EMS8E - 50mA, 80V LDO Linear Regulator | Analog Devices
The Analog Devices LT3010EMS8E (formerly Linear Technology) is a high-voltage, micropower low-dropout linear regulator capable of supplying 50 mA output current at output voltages adjustable from 1.275 V to 60 V, housed in an 8-lead MSOP package with an exposed pad for enhanced thermal performance. The device operates over a wide 3 V to 80 V input voltage range and delivers a low dropout voltage of approximately 300 mV at 50 mA, making it well suited for harsh 12 V, 24 V, and 48 V industrial supply rails. A low-dropout (LDO) linear regulator is a type of voltage regulator that maintains a stable output voltage even when the input voltage approaches the output voltage. Within the broader power management IC hierarchy, LDOs sit alongside switching converters and supervisors; unlike switching regulators, they introduce no switching noise but dissipate the voltage difference as heat, making them ideal for noise-sensitive analog and RF loads. The LT3010 belongs to the micropower LDO subcategory defined by very low quiescent current (typically 30 µA at no load), enabling long battery life in always-on systems. Key features include 50 mA continuous output current, 30 µA quiescent current, 60 V maximum adjustable output, 80 V maximum input, reverse-input and reverse-output protection, thermal limiting with hysteresis, and a shutdown pin that drops quiescent current to approximately 1 µA. The exposed-pad MSOP-8 package provides a low thermal resistance of approximately 40 °C/W (depending on PCB layout), supporting reliable operation at elevated ambient temperatures. The regulator uses a PNP pass architecture with a precision bandgap reference. This topology enables the wide VIN range and low dropout while keeping ground pin current low and relatively constant over load, an improvement over older NPN regulator designs. A single external resistor divider sets the adjustable output, and the SHDN pin allows logic-level on/off control for power sequencing. Typical applications include industrial 24 V sensor supplies, automotive battery-fed loads, factory automation modules, bias supplies for op-amps and references, and post-regulation following switching converters where clean, low-noise rails are required. When designing with the LT3010, ensure sufficient PCB copper area under the exposed pad to manage thermal dissipation; at 50 mA and a large VIN–VOUT differential, power dissipation can exceed 2 W. Always include the recommended input/output capacitors and verify stability with the manufacturer-recommended ESR range. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single decision-ready reference for the LT3010EMS8E.
LT3045HMSE#PBF - 500mA Ultra-Low Noise LDO | Analog Devices
The Analog Devices LT3045HMSE#PBF is a high-performance low dropout linear regulator delivering 500mA output current with an ultralow 0.8 uVrms noise floor and 76 dB PSRR at 1 kHz, packaged in a 12-pin MSOP-EP (exposed pad). It operates from a wide input voltage range of 1.8 V to 20 V and supports an adjustable output from 0 V to 15 V via external resistors, while internal architecture uses a precision current reference followed by a unity-gain voltage buffer. An LDO (Low-Dropout) linear regulator is a type of voltage regulator that maintains a stable output voltage even when the input voltage is very close to the output voltage. In the system hierarchy, an LDO is a subset of linear regulators, which are themselves a category of voltage regulators within the broader power management IC family. The LT3045 belongs to the ultra-low-noise category designed for noise-sensitive analog/RF loads that cannot tolerate the ripple typical of switching regulators. Key features include a 260 mV typical dropout voltage at full 500 mA load, 2.2 mA quiescent current that drops to sub-1 µA in shutdown, programmable current limit, and a power-good indicator. The exposed-pad MSOP-12 package achieves a thermal resistance of approximately 33 °C/W, supporting sustained 500 mA operation without external heatsinking at moderate VIN-VOUT differentials. The LT3045 is architected as a precision current reference with a unity-gain amplifier on the output. This unique topology delivers constant output noise, PSRR, bandwidth, and load regulation independent of the programmed output voltage - a key advantage over conventional series-pass LDOs whose noise and bandwidth scale with VOUT. Typical applications include RF PLL/VCO power supplies, high-speed data converter references, precision instrumentation front-ends, medical imaging, and post-regulation after switching converters. Designers favor the LT3045 wherever sub-1 µVrms noise is required without the switching artifacts of a buck regulator. When designing with the LT3045, treat the exposed pad as the primary thermal path and provide at least 1 cm² of copper pour to keep junction temperature below 125 °C. Use a minimum 10 µF X7R input/output capacitor to maintain stability and PSRR; ESR must stay below 50 mΩ. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical thermal/PCB design notes not found in the standalone Analog Devices datasheet, helping engineers shorten the BOM selection and PCB bring-up cycle.