بەرهەمەکان (3,600+)

AD7452BRT-R2 - 12-Bit 555kSPS SAR ADC | Analog Devices | SOT-23-8
AD7452BRT-R2

AD7452BRT-R2 - 12-Bit 555kSPS SAR ADC | Analog Devices | SOT-23-8

The Analog Devices AD7452BRT-R2 is a 12-bit, high-speed, low-power successive-approximation (SAR) analog-to-digital converter featuring a fully differential analog input, packaged in an 8-pin SOT-23 and offered on a 2,500-piece reel. It operates from a single 3V or 5V power supply and achieves throughput rates up to 555 kSPS while consuming only 1.2 mW of power at 3V and 555 kSPS, making it well suited to battery-powered and portable data-acquisition systems. An SAR ADC is a successive-approximation analog-to-digital converter that uses a binary-search algorithm against an internal DAC to digitize an analog input in N clock cycles (where N is the resolution in bits). Within the converter hierarchy, the AD7452 sits as: ADC -> data converter -> data acquisition IC -> signal-chain component. SAR converters are valued for deterministic latency, single-shot accuracy and DC-friendly behavior - ideal when a precise snapshot, not a continuous waveform stream, is required. Key features of the AD7452BRT-R2 include 12-bit resolution with no missing codes, a fully differential analog input that supports rail-to-rail common-mode swing, an internal 2.5V reference (or option to overdrive with an external reference), a high-speed serial (SPI/QSPI/MICROWIRE/DSP-compatible) interface, and a hardware power-down pin that drops supply current to sub-microamp levels for battery conservation. The architecture combines a low-noise, low-power comparator with a precision switched-capacitor DAC and an internal oscillator, eliminating the need for an external clock. The result is a compact solution that delivers strong AC (THD, SNR) and DC (DNL, INL) performance while keeping the external BOM to the analog front end, reference bypass capacitors and decoupling only. Typical applications include portable instrumentation, sensor signal conditioning (pressure, temperature, strain gauge bridges), data acquisition boards, and battery-powered transducers. The 555 kSPS throughput is sufficient for industrial process-control loops, instrumentation-grade weigh scales and many audio-bandwidth measurement tasks. One practical design consideration: at 5V supply, power dissipation rises with sample rate; route an analog ground return around the input pins and use a 0.1uF ceramic bypass cap adjacent to AVDD to maintain the rated SNR. Choosing between AD7452BRT (legacy packaging) and AD7452BRTZ-R2 depends on whether the design needs the original SOT-23-8 marking or the Z-suffix lead-free SOT-23-8 variant. This page consolidates distributor pricing, parametric comparison vs SAR alternatives and practical design notes not found in the manufacturer datasheet alone, including drop-in and pin-compatible cross-brand considerations for both new designs and legacy 8-pin SOT-23 SAR ADC sockets.

RFQ پەیوەندی
AD7466BRM - 12-Bit 200 kSPS Micro-Power ADC | Analog Devices
AD7466BRM

AD7466BRM - 12-Bit 200 kSPS Micro-Power ADC | Analog Devices

The Analog Devices AD7466BRM is a 12-bit successive-approximation analog-to-digital converter designed for low-power, high-speed signal acquisition. It operates from a single 1.6 V to 3.6 V supply, supports throughput rates up to 200 kSPS, and is packaged in an 8-MSOP package. The converter uses a low-noise, wide-bandwidth track-and-hold amplifier to handle input signals with frequencies in excess of 100 kHz. An ADC is an analog-to-digital converter, a semiconductor device that converts a continuously varying analog voltage into a numeric code for processing, measurement, or control. The AD7466 belongs to the successive-approximation ADC family, within the broader ADC and data-converter IC hierarchy. This architecture is useful when moderate resolution, compact size, low power consumption, and serial data transfer are more important than very high conversion rates. The AD7466BRM provides a 12-bit conversion resolution, a single analog input channel, and serial-interface operation identified in the product documentation as MICROWIRE, QSPI, and SPI compatible. Its single-supply operating range allows operation in compact battery-powered and embedded systems where a 1.8 V or 2.5 V rail is available. The low-power architecture helps reduce energy consumption during periodic sampling and standby operation. The AD7466, AD7467, and AD7468 form a related family of 12-bit, 10-bit, and 8-bit high-speed, low-power successive-approximation converters. The AD7466 is therefore useful when the system requires greater resolution than the lower-resolution family members while retaining the same general serial-converter architecture. The wide-bandwidth track-and-hold amplifier supports acquisition of higher-frequency input signals than a slow low-pass-oriented converter would allow. Typical applications include industrial process monitoring, portable instrumentation, sensor interfaces, battery-powered measurement systems, and embedded data acquisition. In a sensor interface, the ADC can digitize a conditioned analog output from a transducer or signal-conditioning front end. In an industrial system, its serial interface can connect to a microcontroller or digital signal processor while its low operating voltage helps reduce system power requirements. Designers should pay attention to input range, reference voltage, sampling timing, digital-interface levels, and the acquisition time required by the source impedance. The input network should present a stable settling waveform during the track phase, and the serial clock and data lines should be configured to match the host controller. Use the manufacturer datasheet and pin-description table when assigning PCB tracks, and review the operating limits for the exact suffix before applying the part in a production design.

RFQ پەیوەندی
AD7466BRT-R2 - 12-Bit 200kSPS Micropower ADC | Analog Devices
AD7466BRT-R2

AD7466BRT-R2 - 12-Bit 200kSPS Micropower ADC | Analog Devices

The Analog Devices AD7466BRT-R2 is a 12-bit, high-speed, low-power successive approximation register (SAR) analog-to-digital converter (ADC) in a 6-pin SOT-23 (RT) package. It operates from a single 1.6 V to 3.6 V power supply and supports throughput rates up to 200 kSPS, drawing only 0.62 mW typical at 100 kSPS with a 3 V supply. The internal reference is taken from VDD, allowing the widest dynamic input range with an analog input span of 0 V to VDD. What is a SAR ADC? A successive approximation register analog-to-digital converter is a precision data conversion IC that uses a binary search algorithm to resolve an analog input voltage into a digital code, one bit per clock cycle. SAR ADCs sit within the broader hierarchy: data-converter -> ADC -> precision converter -> signal chain IC. They are valued for high accuracy at moderate sample rates, low latency, deterministic conversion time, and very low power consumption, making them the workhorse of battery-powered and instrumentation applications. Key features include a flexible serial interface compatible with DSP, MICROWIRE, QSPI, and SPI host controllers; an automatic power-down mode between conversions that drops quiescent current to under 1 microampere; and a wide 1.6 V to 3.6 V single-supply range. The SOT-23-6 footprint makes AD7466BRT-R2 one of the smallest precision 12-bit ADCs available, ideal for space-constrained designs. No external reference is required, simplifying BOM cost. Technically, the AD7466BRT-R2 uses a switched-capacitor charge redistribution architecture with input sampling on the falling edge of CS and conversion driven by the external SCLK. The reference is internally tied to VDD, which trades absolute accuracy for simplicity and minimum external parts. Signal-to-noise-plus-distortion ratio (SINAD) tracks VDD, and integral nonlinearity (INL) and differential nonlinearity (DNL) are specified for industrial temperature grades. Typical applications include portable and battery-powered measurement systems, medical instrumentation front-ends, remote and isolated data acquisition modules, optical sensor monitoring, and low-power industrial sensor interfaces. The part is widely used wherever a 12-bit conversion is sufficient and board area is critical. A key design tip: the SCLK idle state must be set high to match the AD7466 logic convention, and the CS falling edge initiates both sampling and conversion - there is no separate sample/hold control. Bypass VDD with a 1 microfarad plus 100 nanofarad capacitor pair placed within 3 mm of the supply pin. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single decision-ready reference for the AD7466BRT-R2.

RFQ پەیوەندی
AD7467BRM - 10-Bit 200 kSPS ADC | Analog Devices
AD7467BRM

AD7467BRM - 10-Bit 200 kSPS ADC | Analog Devices

Analog Devices AD7467BRM is a 10-bit, single-channel, successive-approximation analog-to-digital converter with a throughput rate up to 200 kSPS, a 1.6 V to 3.6 V supply range, and an 8-MSOP package. It combines low-power operation with a compact footprint for applications that require moderate resolution and fast sampling. An ADC is an interface IC that converts an analog voltage into a digital code. A successive-approximation ADC performs conversion by progressively comparing the input with a reference voltage. Within the broader semiconductor hierarchy, the AD7467BRM is an ADC, an interface IC, and a data-acquisition component. It is suited to sensors, industrial controls, instrumentation, and embedded systems that need continuous conversion rather than the very high throughput of a flash converter. The principal specifications include 10-bit resolution, one analog input channel, operation from 1.6 V to 3.6 V, and throughput up to 200 kSPS. These characteristics place the device between low-resolution sensor interfaces and higher-resolution precision converters. The single 8-MSOP package also reduces board area compared with larger multi-channel converter packages, while the 1.6 V minimum supply supports compact low-voltage systems. The AD7467 uses a successive-approximation conversion architecture. This architecture is appropriate when moderate conversion speed and low power consumption are more important than very high sampling rates. Analog Devices identifies the AD7466, AD7467, and AD7468 as related 12-bit, 10-bit, and 8-bit converters, respectively, allowing designers to select the resolution that matches the measurement requirement rather than using unnecessary conversion capacity. Typical uses include battery-powered environmental sensors, temperature and pressure measurement front ends, analog control monitoring, portable instrumentation, and industrial data-acquisition modules. The 200 kSPS throughput allows the converter to sample rapidly varying analog signals, while the 10-bit code provides 1,024 quantization levels for general-purpose measurement and control. The main design consideration is matching the input range, reference voltage, sampling network, and digital interface to the source signal. The analog input must remain within the converter's permitted operating range, and source impedance can affect acquisition time. PCB layout should keep analog and digital return paths controlled and place input, reference, and supply bypass components close to their associated pins. This page combines the manufacturer's family-level specifications with package, application, replacement, and design guidance. It also identifies same-footprint resolution alternatives so engineers can assess whether AD7466BRM or AD7468BRM offers a more appropriate conversion resolution without changing the PCB footprint.

RFQ پەیوەندی
AD7468BRT-R2 - 8-Bit 200kSPS Micro-Power ADC | Analog Devices
AD7468BRT-R2

AD7468BRT-R2 - 8-Bit 200kSPS Micro-Power ADC | Analog Devices

The Analog Devices AD7468BRT-R2 is an 8-bit, high-speed, low-power, successive-approximation analog-to-digital converter (SAR ADC) in a 6-pin SOT-23 package, operating from a single 1.6 V to 3.6 V supply and supporting throughput rates up to 200 kSPS. The R2 suffix indicates a 2,500-piece tape-and-reel packaging variant for high-volume manufacturing. A successive-approximation ADC is a type of data converter that converts an analog input voltage into a digital code by performing a binary search across an internal precision DAC, comparing the reconstructed voltage to the input on each clock cycle. The SAR architecture is prized for low power, deterministic latency, and excellent DC accuracy - it occupies the architectural middle ground between flash ADCs (fast but expensive) and integrating/delta-sigma ADCs (precise but slower). It belongs to the broader hierarchy: ADC -> data converter -> signal chain IC -> semiconductor. Key features of the AD7468BRT-R2 include 8-bit resolution, 200 kSPS throughput, 1.6 V to 3.6 V single-supply operation, and an extremely low power dissipation of 0.62 mW typical at 100 kSPS with a 3 V supply (0.12 mW at 100 kSPS / 1.6 V). The device includes a high-speed SPI-/QSPI-/MICROWIRE-/DSP-compatible serial interface, pseudo-differential analog input, and built-in power-down control via the CS bar pin, which reduces current draw between conversions and makes the part ideal for battery-powered systems. The AD7468BRT-R2 uses a charge-redistribution SAR core with an input bandwidth that comfortably exceeds the Nyquist requirement for 8-bit conversion at 200 kSPS, eliminating the need for an external input buffer in many applications. The wide supply range allows direct interfacing with low-voltage microcontrollers, 1.8 V DSPs, and modern battery chemistries (Li-Ion, coin-cell, energy-harvested rails). Typical applications include battery-powered monitoring systems, portable medical instruments (pulse oximeters, glucose meters), remote data acquisition nodes, isolated data acquisition front-ends, and transducer/sensor signal digitisation. The 6-pin SOT-23 footprint is among the smallest ADC packages available, making the part attractive for space-constrained PCB designs. When designing with this device, observe the analog input bandwidth specification - the -3 dB input bandwidth is typically 2 MHz, so excessive input source impedance can introduce gain error. Use the power-down feature between bursts of conversions to extend battery life by an order of magnitude. This page synthesises distributor pricing, parametric drop-in alternatives, and PCB layout notes for engineers who need to specify or second-source the AD7468BRT-R2 in compact, low-power designs.

RFQ پەیوەندی
AD7472ARUZ-REEL - 12-Bit 1.5MSPS SAR ADC | Analog Devices
AD7472ARUZ-REEL

AD7472ARUZ-REEL - 12-Bit 1.5MSPS SAR ADC | Analog Devices

The Analog Devices AD7472ARUZ-REEL is a 12-bit, 1.5 MSPS successive-approximation analog-to-digital converter (SAR ADC) with a parallel data interface, housed in a 24-pin TSSOP (RU-24) package. It operates from a single 2.7 V to 5.25 V power supply and dissipates only 3.34 mW typical at 1.5 MSPS with 3 V supplies (7.97 mW typical at 5 V), making it well-suited for power-sensitive applications. The device accepts a single-ended analog input on one channel and delivers conversion results through a high-speed parallel interface that can be directly connected to microcontrollers, DSPs, or FPGAs. An SAR (Successive Approximation Register) ADC is a type of analog-to-digital converter that uses a binary search algorithm, an internal DAC, and a comparator to digitize an analog input one bit at a time over N clock cycles, where N equals the converter's resolution. SAR ADCs occupy the middle ground between flash converters (fastest, most power-hungry) and sigma-delta ADCs (highest resolution, lowest speed), making them ideal for general-purpose industrial, instrumentation, and communication applications that need single-shot or burst-mode conversion at hundreds of kSPS to a few MSPS. The AD7472 family sits in the data acquisition -> ADC -> SAR ADC -> semiconductor taxonomy of signal-chain components. Key features include 12-bit resolution with no missing codes, a track-and-hold front end, low power consumption, and a wide input bandwidth suitable for multiplexed or single-channel systems. The wide 2.7 V to 5.25 V supply range allows designers to power the part directly from a 3.3 V or 5 V system rail, simplifying power-tree design. Industrial temperature grade (-40C to +85C) and TSSOP surface-mount packaging support compact PCB layouts. Typical applications include industrial process control, portable and battery-powered instrumentation, data acquisition systems, optical networking modules, and motor control feedback loops. The parallel interface and moderate throughput make it well matched to embedded control tasks where deterministic latency is more important than serial-link compactness. When designing with this ADC, place a low-ESR 100 nF decoupling capacitor close to the VDD pin and a bulk 10 uF capacitor on the supply rail. Provide a clean low-impedance reference voltage to the REFIN pin and ensure the analog input bandwidth is matched to the source impedance to avoid conversion errors. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes that complement the manufacturer datasheet for the AD7472ARUZ-REEL.

RFQ پەیوەندی
AD7472BRU-REEL - 12-Bit 1.5 MSPS Parallel ADC | Analog Devices
AD7472BRU-REEL

AD7472BRU-REEL - 12-Bit 1.5 MSPS Parallel ADC | Analog Devices

The Analog Devices AD7472BRU-REEL is a 12-bit, 1.5 MSPS successive-approximation analog-to-digital converter (SAR ADC) with a parallel interface, housed in a 24-pin TSSOP package. It accepts a 0 V to 2.5 V analog input, operates from a 2.7 V to 5.25 V single supply, and consumes only 3.34 mW typical at 1.5 MSPS with a 3 V supply or 7.97 mW at 1.75 MSPS with a 5 V supply. The part is specified for industrial temperature range (-40 C to +85 C) and is supplied on a 7-inch reel. A SAR ADC is a type of analog-to-digital converter that uses a binary-search successive-approximation algorithm with an internal DAC and comparator to digitize a single analog sample per conversion cycle. SAR ADCs sit in the broader hierarchy of ADC architectures (SAR -> Nyquist-rate ADC -> data converter -> mixed-signal IC -> semiconductor), favored over pipeline or delta-sigma types where low latency, deterministic single-cycle conversion, and simple digital control are required. Key features include 1.5 MSPS guaranteed throughput on the 12-bit grade (the 10-bit AD7470 in the family runs to 1.75 MSPS), a low-power CMOS process with auto-shutdown between conversions, and a high-speed parallel output bus that connects directly to microprocessors, microcontrollers, or ASICs without glue logic. The input is sampled on the falling edge of CONVST and the result is latched on the rising edge of the same signal, simplifying system timing. The internal architecture combines a track-and-hold amplifier, a precision charge-redistribution DAC, a comparator, and a successive-approximation register. The 0 V to 2.5 V input range is well suited to single-supply sensor conditioning, and the wide 2.7 V-5.25 V supply range lets the same part work in both 3 V and 5 V systems without level shifting. Typical applications include battery-powered instrumentation, data acquisition boards, CCD imaging front-ends, optical measurement systems, and process control loops. The low power and small TSSOP footprint also suit handheld test equipment and dense multi-channel acquisition boards. When designing with this ADC, budget the input settling time and ensure the source impedance seen at the analog input is well below the datasheet's recommended maximum to avoid gain errors. Use a low-impedance reference and adequate decoupling on VDD and REFIN to preserve linearity. This page synthesizes reel-packaging pricing, drop-in TSSOP alternatives, and practical design notes that are not found in the manufacturer datasheet alone, helping engineers select, source, and qualify the AD7472BRU-REEL faster.

RFQ پەیوەندی
AD7472BRZ - 12-Bit 1.5 MSPS ADC | Analog Devices
AD7472BRZ

AD7472BRZ - 12-Bit 1.5 MSPS ADC | Analog Devices

The Analog Devices AD7472BRZ is a 12-bit, single-channel, successive-approximation analog-to-digital converter with a parallel output interface, conversion throughput up to 1.5 MSPS, and a 24-lead SOIC package. It operates from a single 2.7 V to 5.25 V supply and accepts an analog input range of 0 V to 2.5 V. The low-power architecture supports portable instrumentation, industrial control, sensor acquisition, and data-capture systems where a compact, low-noise ADC is required. An ADC converts a continuously varying analog voltage into a numerical value for processing by a microprocessor, digital signal processor, or programmable logic. The AD7472 belongs to the successive-approximation, or SAR, ADC family. SAR converters repeatedly compare the sampled input against an internal reference and a weighted capacitor array. This architecture combines predictable latency, direct sampling control, and a parallel data interface without the clock and filtering complexity of a pipeline converter. Key characteristics of the AD7472 include 12-bit resolution, throughput up to 1.5 MSPS, a single 2.7 V to 5.25 V analog and digital supply, and a 0 V to 2.5 V input range. Conversion is initiated by the falling edge of CONVST, while BUSY indicates that the conversion is in progress. According to the manufacturer product information, BUSY returns low 531.66 ns after the falling CONVST edge when the internal clock operates at 26 MHz. The parallel interface simplifies connection to older DSP and FPGA systems that do not use serial protocols. Typical power figures depend on supply voltage and throughput. The AD7472 dissipates approximately 3.34 mW at 1.5 MSPS with 3 V supplies and 7.97 mW at 1.75 MSPS with 5 V supplies, as listed in the component datasheet. This operating range makes the converter suitable for battery-powered measurement equipment, where power dissipation affects both run time and thermal design. The industrial temperature option covers -40°C to +85°C. The AD7472BRZ is used in portable data loggers, process-control modules, industrial sensor interfaces, ultrasonic measurement systems, and embedded acquisition boards. In these systems, the 12-bit code supports measurement of 2.5 V full-scale signals with an input-referred quantization step of approximately 610 µV when the full 0 V to 2.5 V range is used. External reference and input conditioning circuitry remain important when accuracy, common-mode rejection, or overrange behavior must be controlled. For implementation, route the analog input and reference paths away from digital switching nodes, place input and reference decoupling capacitors close to their associated pins, and use a short, symmetric digital-output routing pattern. Check the acquisition timing against the 531.66 ns conversion indication and the receiving device setup time. Request a quote on this page for current commercial availability, lead time, and orderable quantities.

RFQ پەیوەندی
AD7472YRU - 12-Bit 1.5 MSPS ADC | Analog Devices
AD7472YRU

AD7472YRU - 12-Bit 1.5 MSPS ADC | Analog Devices

The Analog Devices AD7472YRU is a 12-bit, single-channel, parallel-output successive-approximation analog-to-digital converter capable of 1.5 MSPS throughput from a single 2.7 V to 5.25 V supply. It is packaged in a 24-pin TSSOP surface-mount package for compact data-acquisition and signal-conditioning systems. An ADC is a data-acquisition IC that converts an analog voltage into a digital code. The AD7472 belongs to the parallel-output SAR ADC family, combining a 12-bit resolution, 1.5 MSPS sampling capability, and low 4 mW power operation in a single package. The AD7470 is the related 10-bit member of the family, while AD7472 provides the higher resolution needed when the input-to-output quantization step must be smaller. Key characteristics include 12-bit resolution, 1.5 MSPS maximum throughput, a 2.7 V to 5.25 V analog supply range, and a low-noise internal reference. The parallel interface presents the conversion result across dedicated digital output pins, allowing direct connection to a microcontroller, FPGA, DSP, or logic device without requiring a serial data link. The successive-approximation architecture performs one conversion through a sequence of internal comparator decisions. Its throughput is suitable for industrial process monitoring, sensor acquisition, portable measurement equipment, and embedded control loops. Because the interface is parallel, the host processor must be able to accept and latch 12 bits of conversion data within the available acquisition interval. A typical implementation places the AD7472 close to the analog input source and routes its digital outputs to a logic device. Short analog traces reduce pickup of noise and switching artifacts, while a solid ground plane and careful separation of analog and digital return currents help preserve conversion accuracy. The manufacturer datasheet should be consulted for the complete pin-description table, recommended input and reference circuits, and acquisition timing diagrams. The AD7472YRU is suited to designers who require a parallel-output SAR converter with a compact 24-pin TSSOP footprint. AD7472ARU and AD7472BRU provide related temperature-grade choices, while the AD7470 members trade resolution for higher throughput. This page also organizes pricing evidence, replacement guidance, comparison parameters, and practical design notes for faster component selection.

RFQ پەیوەندی
AD7472YRZ - 12-Bit 1.5 MSPS ADC | Analog Devices
AD7472YRZ

AD7472YRZ - 12-Bit 1.5 MSPS ADC | Analog Devices

The Analog Devices AD7472YRZ is a 12-bit, single-channel, successive-approximation analog-to-digital converter with a throughput rate up to 1.5 MSPS, a 2.7 V to 5.25 V analog supply range, and a 24-lead SOIC package. It converts an analog input voltage into a 12-bit parallel digital result for data-acquisition, instrumentation, industrial-control, and embedded measurement systems. An ADC is a data-conversion integrated circuit that samples an analog voltage and represents it as digital data. Within the analog-to-digital converter hierarchy, the AD7472 is a successive-approximation, or SAR, ADC: an internal sample-and-hold circuit captures the input, and successive comparison steps determine each output bit. A parallel-output ADC exposes the converted word directly on digital pins, reducing the need for a serial interface and simplifying connections to suitable processors, FPGAs, or data-capture logic. The AD7472 combines 12-bit resolution with a maximum 1.5 MSPS conversion rate. Its single analog input and 2.7 V to 5.25 V operating supply support compact mixed-signal designs where conversion speed, resolution, and low power consumption are more important than input multiplexing. The Analog Devices AD7472 family is identified as a high-speed, low-power SAR ADC, while the AD7472YRZ is offered in the 24-terminal SOIC outline. Its 0 V to 2.5 V analog input range makes the converter appropriate for sensor interfaces and control signals scaled to that interval. The parallel word-access architecture allows the twelve-bit result to be captured directly rather than serialized on a dedicated data bus. Designers must still account for acquisition time, conversion time, input settling, reference accuracy, digital timing, and analog noise when defining the overall sample rate. Typical uses include industrial process monitoring, temperature and pressure sensor acquisition, laboratory measurement equipment, motor and power-system control, and embedded data-logging systems. A 1.5 MSPS conversion capability is useful when a design needs more frequent measurements than a slow general-purpose ADC can provide, while 12-bit resolution provides 4096 discrete codes across the selected input range. The principal design consideration is signal integrity. Place the input and reference networks close to the device, use a low-noise reference, keep analog and digital return currents separated, and observe the datasheet timing for sample acquisition and conversion. The SOIC footprint also requires adequate copper area and careful assembly layout for stable thermal and analog performance. This page combines the Analog Devices product specifications with practical acquisition guidance, verified drop-in references, packaging details, and application-oriented design notes. It helps engineers evaluate the AD7472YRZ against pin-compatible family members and plan the surrounding analog, digital, and layout implementation.

RFQ پەیوەندی
AD7475ARM-REEL7 - 12-bit 1MSPS SAR ADC | Analog Devices
AD7475ARM-REEL7

AD7475ARM-REEL7 - 12-bit 1MSPS SAR ADC | Analog Devices

The Analog Devices AD7475ARM-REEL7 is a 12-bit, high-speed, low-power successive-approximation register (SAR) analog-to-digital converter (ADC) that operates from a single 2.7V to 5.25V supply and delivers throughput rates up to 1 MSPS. Packaged in an 8-pin MSOP (RM-8) and supplied on a 7-inch reel, the part integrates a low-noise wide-bandwidth track-and-hold amplifier capable of processing input signals beyond 1 MHz. The 2.5V reference is applied externally to the REF IN pin, allowing designers to optimise dynamic range for each application by selecting the most appropriate external reference. The serial interface is compatible with DSP, MICROWIRE, QSPI and SPI, allowing easy connection to the majority of microcontrollers and DSPs without glue logic. A SAR ADC is a successive-approximation architecture that converts an analog input to a digital code through a binary-search algorithm using an internal DAC and comparator, achieving an excellent balance of speed, accuracy and power efficiency. SAR ADCs sit within the broader category of data converters (ADC/DAC) and are widely preferred for multiplexed channel acquisition, motor control feedback loops, and precision instrumentation where low latency and deterministic sampling are required. The AD7475 family (AD7475/AD7495) occupies the lower-power, high-speed segment of the SAR market, targeting portable, industrial and process-control designs. Key specifications include 12-bit resolution with no missing codes, 1 MSPS throughput, 4.5 mW typical power dissipation at 1 MSPS with 3V supply (10.5 mW at 5V), and a flexible VDRIVE function that sets the serial-interface logic level independently of the analog supply. The high-bandwidth track-and-hold amplifier handles input frequencies well above the Nyquist limit, supporting undersampling and accurate acquisition of fast transients. The serial interface can be configured for 3-wire or 4-wire SPI/MICROWIRE/QSPI/DSP operation, simplifying integration across a broad range of host platforms. Typical applications include battery-powered instrumentation, data acquisition systems, motor control feedback, portable medical devices and industrial process control. The wide 2.7V to 5.25V supply range and low power dissipation make the AD7475ARM-REEL7 particularly attractive for remote, battery-powered sensor nodes where energy budget is critical. When designing with the AD7475, provide a low-impedance external reference (such as the AD780 or ADR02) for full 12-bit performance, and keep digital and analog ground returns separated with a single-point join to preserve noise immunity.

RFQ پەیوەندی
AD7475BRMZ-REEL - 12-Bit 1MSPS SAR ADC | Analog Devices
AD7475BRMZ-REEL

AD7475BRMZ-REEL - 12-Bit 1MSPS SAR ADC | Analog Devices

The Analog Devices AD7475BRMZ-REEL is a 12-bit, high-speed, low-power successive-approximation analog-to-digital converter (SAR ADC) that operates from a single 2.7 V to 5.25 V supply and delivers throughput rates up to 1 MSPS. Packaged in an 8-pin MSOP (RM-8) and supplied on a 7-inch reel, it integrates a low-noise, wide-bandwidth track-and-hold amplifier capable of handling input frequencies in excess of 1 MHz. The external 2.5 V reference applied at REF IN, combined with the on-chip serial interface, makes it well suited for compact mixed-signal designs. A SAR (Successive Approximation Register) ADC is a precision converter architecture that uses a binary-search algorithm against an internal DAC to digitize the input voltage in N clock cycles. SAR ADCs sit in the broader taxonomy of analog-to-digital converters -> data converters -> mixed-signal ICs -> signal chain semiconductors, and they are favoured over pipeline or flash ADCs where low latency, deterministic sampling, and low power consumption are required at moderate resolutions (8 to 16 bits). Key features include a 1 MSPS conversion rate, 4.5 mW typical power dissipation at full speed, a flexible serial (SPI/QSPI/MICROWIRE/DSP-compatible) interface, and the proprietary VDRIVE function that allows the digital I/O logic levels to be set independently of the analog supply. The device offers a typical INL of ±1 LSB and operates across the industrial -40C to +85C temperature range, ensuring stable performance in harsh environments. From an architectural standpoint, the AD7475 uses a charge-redistribution DAC array combined with a high-bandwidth sample-and-hold capable of digitizing signals well beyond the Nyquist frequency. The serial clock can be applied up to 20 MHz, supporting the full 1 MSPS throughput while keeping the digital interface noise isolated from the analog input stage, an essential consideration for high-precision measurement systems. Typical applications include battery-powered instrumentation, portable data acquisition systems, optical sensor front-ends, isolated industrial process controls, and precision medical instruments such as patient monitoring devices. Designers also deploy it in motor control feedback loops and programmable logic controller (PLC) analog input modules where deterministic latency and low power are equally important. When designing with this device, ensure the reference decoupling capacitor is placed as close as possible to the REF IN pin and use a clean, low-noise analog ground pour to preserve 12-bit accuracy. The VDRIVE pin should be tied to the host MCU's logic supply to guarantee proper SPI timing margins at full 1 MSPS throughput. This page synthesizes distributor pricing, drop-in compatible replacements, and practical PCB layout notes that extend beyond the manufacturer datasheet, giving engineers a single authoritative reference for the AD7475BRMZ-REEL.

RFQ پەیوەندی
AD7476AAKSZ-REEL - 12-bit 1MSPS SAR ADC SC-70 | ADI
AD7476AAKSZ-REEL

AD7476AAKSZ-REEL - 12-bit 1MSPS SAR ADC SC-70 | ADI

The Analog Devices AD7476AAKSZ-REEL is a 12-bit, 1 MSPS successive-approximation register (SAR) analog-to-digital converter (ADC) housed in a 6-lead SC-70 package. It operates from a single 2.35 V to 5.25 V power supply, consumes low power, and provides one analog input channel with a throughput rate up to 1 MSPS. An ADC is a data converter that transforms a continuous analog voltage into a discrete digital code. SAR (Successive Approximation Register) ADCs use a binary-search algorithm combined with an internal DAC to resolve each conversion in a fixed number of clock cycles, balancing speed, accuracy, and power efficiency. Within the converter hierarchy, this places the AD7476A in the precision, low-power, successive-approximation sub-family, well-suited for battery-powered and space-constrained instrumentation. Key features of the AD7476A include 12-bit resolution, 1 MSPS throughput, a wide 2.35 V to 5.25 V single-supply input range, low power consumption, and a small 6-lead SC-70 outline. The -REEL suffix denotes tape-and-reel packaging for high-speed pick-and-place assembly. The part shares pinout with the 10-bit AD7477A and 8-bit AD7478A, allowing designers to migrate resolution by simply changing the device. Typical applications include portable and battery-powered systems, instrumentation, data acquisition front-ends, optical sensor front-ends, and general-purpose analog monitoring in industrial, medical, and consumer designs. The SC-70 footprint makes it attractive where PCB real estate is at a premium. When designing with this device, provide adequate decoupling near the supply pin and ensure the analog input is bandwidth-limited to avoid aliasing. The wide supply range simplifies integration into both 3.3 V and 5 V systems. This page synthesizes distributor pricing, verified pin-compatible alternatives, and practical design notes curated for engineers — beyond what is found in the manufacturer datasheet.

RFQ پەیوەندی
AD7476ABKSZ-REEL - 12-Bit 1 MSPS SAR ADC, SC-70-6 | Analog Devices
AD7476ABKSZ-REEL

AD7476ABKSZ-REEL - 12-Bit 1 MSPS SAR ADC, SC-70-6 | Analog Devices

The Analog Devices AD7476ABKSZ-REEL is a 12-bit, 1 MSPS successive-approximation register (SAR) analog-to-digital converter housed in a 6-lead SC-70-6 package. It operates from a single 2.35 V to 5.25 V power supply, features a single-ended analog input, and is rated over the -40C to +85C industrial temperature range. The part pairs a 12-bit resolution with throughput up to 1 million samples per second, making it one of the smallest form-factor high-speed ADCs in the ADI portfolio. An SAR ADC is a type of data converter that uses a successive-approximation register and an internal track-and-hold to digitize an analog input in a fixed number of clock cycles (typically one per N-bit cycle). As a sub-family of Nyquist-rate data converters, SAR ADCs sit between sigma-delta converters (higher resolution, lower speed) and flash ADCs (highest speed, lowest resolution) within the ADC taxonomy. ADCs are integrated circuits that bridge real-world analog signals to digital processors and microcontrollers across the broader mixed-signal and data-acquisition IC hierarchy. Key features include very low power consumption, a high-speed SPI/QSPI/MICROWIRE-compatible serial interface, and an automatic power-down between conversions that drops current draw dramatically when the part idles between samples. The 6-lead SC-70 footprint makes it one of the smallest 1 MSPS ADCs available, enabling analog front-end placement next to sensors on space-constrained PCBAs. The device uses a charge redistribution DAC architecture with an internal reference and a high-bandwidth input track-and-hold to deliver 12-bit linearity across the full input common-mode range. Because conversion is deterministic in time (no pipeline latency), the AD7476A is well suited to event-triggered sampling, multiplexed-channel sequencing, and motor-control feedback loops where deterministic group delay is required. Typical applications include battery-powered portable instrumentation, hand-held multimeters and data loggers, transducer signal conditioning chains, isolated industrial sensors, optical-module monitoring, and general-purpose embedded analog front ends. Designers select this part specifically when PCB area, single-rail operation, and deterministic conversion latency are more important than the very highest absolute sampling rates. When laying out a board, place the 0.1uF supply-decoupling capacitor as close as possible to the VDD pin, keep analog and digital grounds separated with a single-point stitch near the IC, and route the SCK, SDATA, and /CS digital traces away from the analog input net. Always drive /CS low before SCK edges and observe the tCONVERT timing budget for accurate 1 MSPS operation. This page synthesizes ADI distributor pricing, drop-in alternatives, and SC-70 layout/design notes that go beyond the bare datasheet to give you a faster procurement and bring-up decision.

RFQ پەیوەندی
AD7476ARTZ-REEL - 12-Bit 1MSPS SAR ADC SOT-23-6 | ADI
AD7476ARTZ-REEL

AD7476ARTZ-REEL - 12-Bit 1MSPS SAR ADC SOT-23-6 | ADI

The Analog Devices AD7476ARTZ-REEL is a 12-bit, 1 MSPS successive-approximation-register (SAR) analog-to-digital converter in a 6-lead SOT-23 package, delivering high-speed acquisition in the industry's smallest footprint for its performance class. It operates from a single 2.35 V to 5.25 V supply, draws only 3.6 mW typical at 1 MSPS with a 3 V supply, and integrates a low-noise wide-bandwidth track-and-hold amplifier capable of handling input frequencies beyond 6 MHz with 70 dB SNR at 100 kHz input. A SAR ADC is a successive-approximation-register analog-to-digital converter that uses a binary-search algorithm against an internal DAC to convert an analog input to a digital code in N clock cycles for N-bit resolution. In the broader signal-chain taxonomy, SAR ADCs sit between flash converters (fastest, lowest resolution) and sigma-delta ADCs (slowest, highest resolution), making them the optimal choice when an application needs single-cycle latency, moderate-to-high speed, and 8-16 bit resolution. The AD7476 belongs to the data-converter hierarchy: ADC -> SAR ADC -> 12-bit ADC -> low-power precision ADC, and is widely used as a system-side companion to microcontroller ADCs when higher speed or accuracy is required. Key features include flexible power/serial-clock-speed management that scales consumption with throughput, a high-speed serial interface compatible with SPI/QSPI/MICROWIRE/DSP, pseudo-differential analog input referenced to GND, and an operating temperature range of -40C to +85C. The 1 MSPS throughput makes the part suitable for multiplexed multi-channel systems where channels are scanned in sequence. Typical applications include portable and battery-powered instrumentation, industrial process control loops, optical module monitoring, motor-control current sensing, and data-acquisition front-ends. Designers benefit from the part's small SOT-23-6 footprint when board real estate is constrained, and from its 3.6 mW dissipation when thermal or battery budgets are tight. When designing with this ADC, budget for at least 3 acquisition-clock cycles before conversion starts to settle the track-and-hold fully, and place the 0.1 uF decoupling capacitor as close as possible to the VDD pin to preserve SNR. Average supply current scales linearly with throughput, so the part is equally well-suited to high-speed burst sampling and continuous low-rate conversion. This page synthesizes distributor stock, parametric drop-in alternatives, and practical SOT-23 layout guidance beyond the manufacturer datasheet.

RFQ پەیوەندی
AD7476BRTZ-REEL - 12-bit 1MSPS SAR ADC | Analog Devices
AD7476BRTZ-REEL

AD7476BRTZ-REEL - 12-bit 1MSPS SAR ADC | Analog Devices

The Analog Devices AD7476BRTZ-REEL is a 12-bit, 1 MSPS, successive-approximation analog-to-digital converter (SAR ADC) housed in a 6-pin SOT-23 (RT) package. It operates from a single 2.35 V to 5.25 V supply, draws a low supply current, and features a wide-bandwidth track-and-hold front end capable of handling input frequencies above 6 MHz. A successive-approximation ADC is a type of data converter that resolves the input voltage one bit per clock cycle against an internal precision DAC, producing a deterministic, low-latency conversion with no pipeline delay. SAR ADCs sit within the broader hierarchy of analog-to-digital converter -> data converter -> mixed-signal IC -> semiconductor, and are favored where low latency, small package size, and ease of use matter more than the very highest conversion rates. The AD7476 family (AD7476/AD7477/AD7478) shares this architecture at 12-, 10-, and 8-bit resolutions respectively. Key specifications include 1 MSPS throughput, 12-bit resolution with no missing codes, a wide input bandwidth exceeding 6 MHz, and an on-chip low-noise track-and-hold amplifier. The part integrates a high-speed serial interface (SPI/QSPI/MICROWIRE-compatible), consumes low power at full speed, and offers flexible input ranges supporting both unipolar and bipolar operation when driven through an appropriate driver or reference. Architecturally, the AD7476 uses a charge-redistribution capacitive DAC core with internal auto-calibration, which provides excellent DC accuracy and low integral nonlinearity across temperature. Its serial interface saves board area and simplifies isolation compared to parallel-output converters of similar speed. Typical applications include portable instrumentation, data acquisition systems, battery-powered equipment, isolated industrial front ends, and precision sensor signal chains. The tiny SOT-23-6 footprint and 1 MSPS rate make it well-suited for compact, low-power designs that still require good DC accuracy. When designing with this part, place the supply decoupling capacitor (typically 100 nF) within 5 mm of the AVDD pin and keep digital traces away from the analog input. For best linearity, drive the input with a low-impedance op-amp buffer rather than a high-impedance source. This page synthesizes distributor pricing, drop-in SOT-23-6 alternatives, and practical design notes not consolidated on the manufacturer datasheet alone.

RFQ پەیوەندی
AD7477ARTZ-REEL - 10-Bit 1MSPS SAR ADC SOT-23-6 | Analog Devices
AD7477ARTZ-REEL

AD7477ARTZ-REEL - 10-Bit 1MSPS SAR ADC SOT-23-6 | Analog Devices

The Analog Devices AD7477ARTZ-REEL is a 10-bit, 1 MSPS successive-approximation-register (SAR) analog-to-digital converter in a 6-lead SOT-23 package. The part operates from a single 2.35 V to 5.25 V power supply and features one analog input channel with a serial SPI/QSPI/MICROWIRE/DSP-compatible data interface. Its throughput rate of up to 1 MSPS makes it one of the fastest ADCs available in a SOT-23-6 footprint. A SAR ADC is a successive-approximation-register converter that uses a binary-search algorithm and an internal capacitive DAC to convert an analog input into a digital codeword. Within the data-converter hierarchy, SAR ADCs sit between flash converters (faster, lower resolution, higher power) and sigma-delta ADCs (slower, higher resolution, excellent noise). They occupy the niche where moderate-to-high speed, low latency, and low power consumption are required without the latency penalty of oversampling converters. Key features of the AD7477ARTZ-REEL include 70 dB SNR at 100 kHz input, wide input bandwidth, low power at 1 MSPS with both 3 V and 5 V supplies, and a small SOT-23-6 footprint that enables dense PCB layouts. The wide supply range lets a single device operate across 3.3 V and 5 V system rails, simplifying multi-rail designs and reducing inventory variants. The internal architecture combines an input sampling network, a precision comparator, a successive-approximation register with a 10-bit DAC, and a serial output engine. The 70 dB SNR translates to roughly 11.3 effective bits at full speed, sufficient for industrial monitoring, motor-control feedback loops, and instrumentation front-ends where 10-bit absolute accuracy is required. Typical applications include battery-management systems, portable instrumentation, data acquisition front-ends, optical-module monitoring, and general-purpose embedded analog signal conditioning. The small package makes it well suited to space-constrained designs such as handheld test equipment and IoT sensor nodes. When designing with the AD7477ARTZ-REEL, observe proper analog-input driving and decoupling: use a low-impedance buffer or RC network at AIN, and place 100 nF bypass capacitors as close to VDD and GND as possible to preserve SNR at full 1 MSPS throughput. This page consolidates manufacturer specifications, distributor pricing as of 2026-10-12, drop-in alternatives, and practical design notes drawn from the Analog Devices datasheet family to support fast, accurate component selection.

RFQ پەیوەندی
AD7477SRTZ-REEL - 10-Bit 1MSPS SAR ADC | Analog Devices
AD7477SRTZ-REEL

AD7477SRTZ-REEL - 10-Bit 1MSPS SAR ADC | Analog Devices

The Analog Devices AD7477SRTZ-REEL is a 10-bit, high-speed, low-power successive approximation register (SAR) analog-to-digital converter with a 1 MSPS sampling rate in a 6-pin SOT-23 (RT) package. It operates from a single 2.35 V to 5.25 V supply, drawing only 4 mA typical at 1 MSPS with VDD = 3 V, and provides a versatile SPI/QSPI/MICROWIRE/DSP-compatible serial interface. A SAR ADC is a type of data converter that uses a binary-search successive-approximation algorithm to digitize an analog input one bit at a time within a single clock cycle per bit. SAR ADCs occupy the middle ground between flash ADCs (fastest, lowest resolution) and sigma-delta ADCs (highest resolution, lower speed). They are widely used in industrial, instrumentation, and motor-control applications where deterministic latency, low latency-to-sample delay, and moderate-to-high sampling rates are required without the cost of higher-end delta-sigma parts. The AD7477 family sits in the precision Analog Devices portfolio alongside its 8-bit (AD7478) and 12-bit (AD7476) siblings. Key features of the AD7477SRTZ-REEL include throughput up to 1 MSPS, an analog input range of 0 V to VDD, true bipolar input capability with a resistor network, an on-chip track-and-hold amplifier, and a high-speed serial interface. The device includes an on-chip reference input (REF) and a low-noise, wide-bandwidth track-and-hold capable of handling input frequencies well above the Nyquist limit. Power-down current is typically 1 µA, making the part suitable for battery-powered and portable designs. Architecturally, the AD7477 uses a charge-redistribution DAC array controlled by a SAR logic core. The analog input is sampled on an internal capacitor array, then compared against binary-weighted capacitors in successive approximation cycles, yielding 10 bits in 10 conversion cycles. The serial output appears MSB-first on SDOUT, clocked by SCLK. The compact SOT-23-6 footprint measures only 2.9 mm × 1.6 mm and offers an exposed pad for thermal dissipation and reduced ground inductance. Typical applications include industrial process control, portable data acquisition, battery-powered instruments, motor control feedback, and transducer interfacing. The wide 2.35 V – 5.25 V supply range allows direct interfacing to 3.3 V and 5 V microcontrollers, while the SPI-compatible serial interface ensures easy connection to DSPs and microcontrollers without glue logic. When designing with the AD7477, ensure the reference voltage source has low impedance at the REF pin - a 10 µF decoupling capacitor close to the pin is recommended. Keep analog input traces short and away from digital switching signals to minimize crosstalk, and place a small RC anti-aliasing filter at AIN when sampling broadband signals. This page synthesizes distributor pricing, drop-in alternatives, application circuits, and practical PCB layout guidance not found in the manufacturer datasheet alone, optimized for design engineers and procurement specialists.

RFQ پەیوەندی
AD7478AAKSZ-REEL - 8-Bit 1MSPS SAR ADC, SC-70-6 | Analog Devices
AD7478AAKSZ-REEL

AD7478AAKSZ-REEL - 8-Bit 1MSPS SAR ADC, SC-70-6 | Analog Devices

The Analog Devices AD7478AAKSZ-REEL is an 8-bit, 1 MSPS successive-approximation register (SAR) analog-to-digital converter housed in a 6-lead SC-70 (KS) package and shipped on 10,000-unit reels. It operates from a single 2.35 V to 5.25 V supply, consumes low power at full throughput, and provides 1 input channel with serial SPI/DSP-compatible interface. The device is part of the AD7476A/AD7477A/AD7478A family, where resolution defines the part number (12-/10-/8-bit respectively). An SAR ADC is a type of analog-to-digital converter that uses a successive-approximation register and an internal capacitive DAC to convert an analog input to a digital code. SAR ADCs offer deterministic latency, no pipeline delay, and excellent dynamic performance for medium-speed applications. In the broader taxonomy, ADCs are classified by architecture: SAR, sigma-delta, pipeline, and flash; SAR converters sit in the middle of the speed-vs-resolution trade-off, making them ideal for multiplexed data acquisition, motor control, and portable instrumentation. Key features include a 1 MSPS throughput rate at full speed, low power consumption at both 3 V and 5 V supplies, wide input bandwidth, 71 dB SNR at 100 kHz input frequency, and a small SC-70-6 footprint suitable for space-constrained designs. The integrated sample-and-hold supports single-ended analog inputs from 0 V to VDD. The AD7478A uses a charge-redistribution SAR architecture with an internal clock, providing a compact solution that requires no external reference (it uses VDD as the reference by default) and only a minimal number of passive components. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP serial ports, simplifying connections to modern microcontrollers and DSPs. Typical applications include battery-powered portable instruments, isolated data acquisition, multi-channel multiplexed systems, optical module monitoring, and general-purpose analog signal digitisation. The wide supply range and low power consumption make it well-suited for IoT edge nodes and 3.3 V microcontroller-based designs. When designing with this device, keep analog and digital grounds separated and connect them at a single point near the ADC to minimise digital noise coupling into the conversion result. Place the decoupling capacitor as close as possible to the VDD pin and ensure the input signal source can drive the ADC's sample-and-hold capacitor without degrading THD. This page synthesizes distributor pricing, drop-in alternatives from the AD7476A/AD7477A/AD7478A family, and practical design notes not found in the standalone manufacturer datasheet, helping engineers compare and source the right 8-bit SAR ADC for their application.

RFQ پەیوەندی
AD7478ARTZ-REEL - 8-Bit 1 MSPS SAR ADC SOT-23-6 | Analog Devices
AD7478ARTZ-REEL

AD7478ARTZ-REEL - 8-Bit 1 MSPS SAR ADC SOT-23-6 | Analog Devices

The Analog Devices AD7478ARTZ-REEL is an 8-bit, 1 MSPS successive-approximation analog-to-digital converter (SAR ADC) housed in a 6-lead SOT-23 package (SOT-23-6), supplied on a 10,000-unit tape-and-reel reel. It operates from a single 2.35 V to 5.25 V power supply, supports SPI-/QSPI-/MICROWIRE-/DSP-compatible serial interfaces, and delivers up to 1 MSPS throughput with 70 dB SNR at 100 kHz input. A wide input bandwidth track-and-hold amplifier accepts analog inputs exceeding 6 MHz, making it suitable for high-speed, single-channel digital conversion in space-constrained designs. An ADC (analog-to-digital converter) is a semiconductor device that converts a continuous-time analog voltage into a discrete digital code. Within the broader taxonomy, the AD7478 belongs to the SAR ADC family, which executes a binary-search conversion in N clock cycles - ideal for applications that need deterministic latency, low latency, and low power consumption. SAR ADCs sit under the data-converter hierarchy (ADC -> data converter -> signal chain IC -> mixed-signal semiconductor) and are commonly paired with op-amps, references, and microcontrollers in embedded systems. The AD7478ARTZ-REEL features a low-noise, wide-bandwidth track-and-hold front end, low power consumption at 1 MSPS with 3 V and 5 V supplies, and standard SPI-/QSPI-/MICROWIRE-compatible serial I/O. Its tiny SOT-23-6 footprint makes it one of the smallest 1 MSPS SAR ADCs in the industry, ideal for portable, battery-powered, and PCB-area-limited designs. The 8-bit resolution is well matched to sensor digitisation, LED brightness control, and simple process-control loops. Architecturally, the device integrates a sample-and-hold amplifier, an internal reference input structure, a successive-approximation register, and a serial output engine. Conversion is initiated on the falling edge of CNV and the result is clocked out on the rising edges of SCLK. The wide analog-input bandwidth and clean SNR floor let the ADC capture fast transducer signals without the front-end buffer required by slower ADCs. Typical applications include portable and battery-powered instrumentation, transducer digitisation, data acquisition modules, LED lighting control loops, process and industrial control, and any SPI-bus-based embedded measurement. Using it with a precision op-amp such as the AD8021 or an ADR01 reference preserves linearity in the first few LSBs. When designing with this part, follow the manufacturer reference schematic for the SOT-23-6 footprint, keep analog and digital grounds separated, and add 0.1 uF decoupling close to the AVDD pin. The compact package has limited thermal mass, so verify that supply headroom stays within the 2.35 V-5.25 V absolute-maximum envelope during transients. This page synthesises Analog Devices datasheet parameters, current distributor stock and pricing, and drop-in alternatives not aggregated in any single place elsewhere.

RFQ پەیوەندی
AD7482AST - 12-Bit 3 MSPS SAR ADC | Analog Devices
AD7482AST

AD7482AST - 12-Bit 3 MSPS SAR ADC | Analog Devices

The Analog Devices AD7482AST is a 12-bit, single-channel successive-approximation ADC with a maximum throughput rate of 3 MSPS, a 40 MHz input bandwidth, and a 48-pin LQFP package. It operates from a single 5 V supply and provides a parallel output interface for high-speed data acquisition. The AD7482AST is designed for applications requiring rapid conversion without the pipeline delay associated with pipelined converters. An ADC is an analog-to-digital converter that transforms a continuously varying input voltage into a numeric value suitable for digital processing. The AD7482 belongs to the successive-approximation ADC family, where a sampling circuit, internal comparator, and successive conversion process determine the digital result. Its architecture provides a straightforward parallel data path for systems that need predictable conversion timing and direct connection to digital control logic. Key features include 3 MSPS throughput, 12-bit resolution, a wide 40 MHz input bandwidth, and low power consumption of 90 mW in full-power mode. The device also supports a 2.5 mW nap mode and a standby mode with a maximum current of 2 A. Two parallel interface modes allow the converter to be used in systems with different digital timing requirements. The on-board 2.5 V reference can be replaced by an external reference source when greater system-level control is needed. The internal track-and-hold circuit can handle input frequencies in excess of 40 MHz, making the AD7482AST useful for high-speed sampling rather than only slow instrumentation signals. The conversion process has no pipeline delay, which simplifies timing analysis compared with a multistage pipeline ADC. The nominal analog input range is 0 V to 2.5 V, while the offset-shift capability allows the nominal range to be moved by plus or minus 200 mV. Typical applications include industrial control and data-acquisition systems, test and measurement equipment, communications infrastructure, medical instrumentation, and embedded signal-processing platforms. The 3 MSPS conversion rate is useful for sampling waveforms, monitoring analog sensors, and digitizing control signals. The parallel interface requires careful PCB routing and consideration of the number of digital output lines used by the surrounding controller. Designers should pay particular attention to input impedance, source settling, reference stability, and timing margins around the 3 MSPS operating rate. The input network should preserve the 40 MHz bandwidth requirement when higher-frequency signals are sampled. Power and ground distribution should be arranged to prevent reference or analog-signal corruption, particularly when the converter is operated close to its maximum throughput. This product page combines the AD7482AST electrical characteristics, package information, interface considerations, typical applications, and available drop-in family references. It is intended to help engineers evaluate the converter for high-speed data acquisition and to plan the PCB, power, signal, and timing requirements before integrating the ADC.

RFQ پەیوەندی
AD7482BST - 12-Bit 3 MSPS SAR ADC | Analog Devices
AD7482BST

AD7482BST - 12-Bit 3 MSPS SAR ADC | Analog Devices

The Analog Devices AD7482BST is a 12-bit, 3 MSPS successive-approximation register ADC with a parallel interface, supplied in a 48-lead LQFP package. It combines a 12-bit conversion resolution, a maximum throughput rate of 3 MSPS, and analog input bandwidth above 40 MHz for precision signal-acquisition systems. A successive-approximation ADC, or SAR ADC, converts an analog voltage by comparing it with a reference through a series of successive bit decisions. The AD7482 belongs to the ADC hierarchy, which includes data converters, analog-to-digital converters, and signal-chain semiconductors. Its parallel interface supports direct connection to digital control logic rather than relying on a serial protocol. The principal feature is a conversion throughput of up to 3 MSPS with 12-bit resolution. Analog Devices describes the device as low power and high speed, with a low-noise, wide-bandwidth track-and-hold circuit that can handle input frequencies above 40 MHz. These characteristics support sampled measurement, instrumentation, communications, industrial control, and embedded signal-processing applications. The internal architecture uses the AD7482 SAR conversion core and an on-chip sample-and-hold function. The wide input bandwidth allows the sampling network to acquire high-frequency signals, while the 12-bit output defines the numerical resolution available to downstream logic. Because the interface is parallel, the converter can require more board routing than a serial ADC, but it reduces the need to multiplex or deserialize data before capture. Typical uses include industrial measurement systems, waveform capture, communications equipment, control loops, and data-acquisition front ends. The AD7482BST is especially appropriate when throughput and input bandwidth matter more than a serial bus or exceptionally small package size. A suitable design must also account for reference accuracy, source impedance, acquisition time, digital timing, and analog trace integrity. For PCB implementation, place the analog input, reference, and decoupling connections close to the device, keep digital return currents away from sensitive analog nodes, and provide a quiet reference source. Confirm setup and conversion timing against the manufacturer datasheet before using the parallel outputs as system data-valid and state signals. This product page combines the manufacturer’s AD7482 specifications, practical acquisition guidance, verified family alternatives, and sourcing information for engineers designing around the 48-lead LQFP footprint. It is intended to accelerate component selection while keeping critical design assumptions visible.

RFQ پەیوەندی
AD7484BST - 14-Bit 3 MSPS SAR ADC | Analog Devices
AD7484BST

AD7484BST - 14-Bit 3 MSPS SAR ADC | Analog Devices

Analog Devices AD7484BST is a 14-bit, single-channel, high-speed successive-approximation register ADC capable of 3 MSPS conversion throughput in a 48-lead LQFP 7 mm × 7 mm package. It accepts analog input signals with frequencies above 40 MHz and provides a parallel interface with no pipeline delay. A successive-approximation ADC, or SAR ADC, converts an analog voltage into a digital code through a sequence of internal comparisons. The SAR ADC family occupies the practical middle ground between high-resolution delta-sigma converters and very-high-speed flash converters. Unlike a pipelined ADC, the AD7484 does not introduce pipeline delay. This makes it suitable for systems requiring immediate acquisition results, coherent sampling, or deterministic control-loop timing. The AD7484BST combines 14-bit resolution with a maximum throughput of 3 MSPS. Its low-noise, wide-bandwidth track-and-hold circuit supports input frequencies above 40 MHz, while the single-input architecture simplifies analog routing. The parallel data interface exposes the conversion result directly to digital logic and is appropriate for systems in which a processor, FPGA, or other parallel data-capture device reads the complete 14-bit result. Operationally, the converter uses a proprietary algorithmic successive-approximation process rather than a pipeline architecture. Each conversion resolves the sampled input through successive internal decisions, and the result becomes available without a pipeline latency. Designers should still observe the required acquisition and conversion intervals from the manufacturer datasheet when establishing control-loop timing or maximum sampling frequency. Typical applications include industrial process monitoring, instrumentation, communications receivers, vibration and signal analysis, data-acquisition systems, and control equipment. The 3 MSPS rate supports fast transient capture, while the 14-bit word provides useful resolution for general-purpose analog measurement. Its parallel output also makes it practical in FPGA-based acquisition platforms where converter data can be captured directly on a clock boundary. The primary design consideration is signal conditioning and interface timing. Place input and reference decoupling close to the device, keep sensitive analog traces short, and use a stable reference arrangement that meets the converter’s accuracy requirements. Digital output timing, clocking, and input acquisition must be designed together because source impedance, sample-and-hold acquisition time, and settling behavior determine the usable input bandwidth. This page combines the manufacturer’s technical overview, exact-package identification, verified commercial listing information, and practical interface guidance. It also documents drop-in replacement findings and distinguishes the AD7484BSTZ lead-free ordering option from a broader cross-brand replacement search.

RFQ پەیوەندی
AD7485BST - 14-Bit 1 MSPS SAR ADC | Analog Devices
AD7485BST

AD7485BST - 14-Bit 1 MSPS SAR ADC | Analog Devices

The Analog Devices AD7485BST is a 14-bit, single-channel, successive-approximation register analog-to-digital converter with a serial interface, a conversion throughput rate of up to 1 MSPS, and a 48-lead LQFP package. The converter combines factory trimming for low offset and gain errors with low input-referred noise and a wide-bandwidth track-and-hold circuit capable of handling input frequencies above 40 MHz. Its normal-mode power consumption is 70 mW, making it suitable for compact, high-speed data-acquisition systems. A successive-approximation ADC, commonly called a SAR ADC, converts an analog input into digital code by performing a sequence of comparisons against a reference voltage. The AD7485 belongs to the ADC hierarchy, which sits within data-acquisition and signal-conversion integrated circuits. Its SAR architecture provides predictable conversion timing and a compact serial interface, allowing sampled measurements to be transferred efficiently to a controller, DSP, FPGA, or data logger. Key characteristics include 14-bit nominal resolution, single-channel conversion, throughput up to 1 MSPS, and serial data access. Factory trimming reduces DC error sources, including input nonlinearity, offset, and gain error. The low-noise, wide-bandwidth track-and-hold front end allows the converter to capture rapidly changing analog signals while preserving useful signal bandwidth. Normal-mode power dissipation of 70 mW supports low-power instrumentation without requiring a high-performance external converter. The AD7485BST is particularly useful when designers need accurate sampling from a restricted analog input range. The serial interface reduces the number of parallel signal paths on a PCB and can help conserve board area in dense acquisition systems. Its 48-LQFP package also provides more pins than a basic single-channel converter, allowing the device to expose power, reference, analog input, digital interface, and control functions without multiplexing compromises. Typical applications include industrial process monitoring, sensor signal acquisition, portable measurement instruments, medical monitoring equipment, and embedded control systems that sample moderate-bandwidth analog waveforms. In these systems, the AD7485 can sit between an analog front end and a digital processor, with its serial output handled by an SPI-compatible controller or dedicated data-capture logic. PCB design should preserve the converter's analog signal integrity and provide stable reference and supply connections close to the device. Keep the analog input route short, place decoupling capacitors at the supply pins, and use a clean reference source with appropriate grounding. When timing the serial interface, account for acquisition time, conversion time, and data-transfer latency rather than assuming the maximum sample rate is available for every input condition. This product page brings together the manufacturer's converter specifications, verified pricing evidence, package information, a controlled replacement assessment, and practical application guidance. The AD7485BST is best understood as a low-power, 14-bit SAR ADC for compact systems that need accurate single-channel sampling without a parallel data bus.

RFQ پەیوەندی