بەرهەمەکان (3,600+)

PCM1719EG4 - 18-Bit Stereo Audio DAC | Texas Instruments
PCM1719EG4

PCM1719EG4 - 18-Bit Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1719EG4 is an 18-bit stereo audio digital-to-analog converter with an 8-times oversampling digital filter, a multi-level delta-sigma DAC, an analog low-pass filter, and an on-chip headphone amplifier. It accepts serial audio data, operates from a 5 V supply, and is packaged in a 28-pin SSOP. An audio DAC converts digital PCM samples into left- and right-channel analog voltages suitable for headphone, line-output, or subsequent analog amplification stages. Within the signal-chain hierarchy, the PCM1719EG4 is a stereo audio DAC, a digital-to-analog converter, and a signal-conversion integrated circuit. Its integrated filtering and headphone output reduce the number of external components required in a conventional consumer-audio design. Key features include acceptance of 18-bit input data, complete stereo conversion, 8-times oversampling, and integrated analog and digital filtering. The converter operates at 5 V, has an indicated supply current of 25 mA, and is specified over a -40°C to +85°C temperature range. These characteristics suit compact multimedia systems where low component count and direct headphone drive are more important than a high-resolution audiophile architecture. Technically, the PCM1719EG4 combines a digital interpolation stage, a multi-level delta-sigma modulator, and an analog low-pass reconstruction filter. Oversampling and digital filtering remove high-frequency imaging components before the delta-sigma stage, while the analog filter suppresses remaining switching-related energy at the converter output. Its serial interface is intended for digital audio sources rather than parallel or I2C control. Typical uses include CD-player and digital-audio accessory designs, portable consumer equipment, notebook sound systems, and other stereo audio products. In these applications, the converter can receive serial PCM data, generate left and right analog outputs, and use its integrated headphone amplifier to drive a headphone load directly when signal levels and impedance remain within the device operating limits. For implementation, follow the manufacturer pin-description table when routing the serial interface, analog supplies, analog ground, and headphone outputs. Decoupling capacitors should be placed close to their associated supply pins, while analog and digital return currents should follow the layout guidance in the manufacturer datasheet. Confirm output loading, startup behavior, and the selected sampling frequency before finalizing the analog filter and headphone network. This page organizes the converter’s core specifications, application guidance, package information, and qualifying drop-in alternatives into an engineering-focused reference. It also highlights where replacement parts differ in resolution, filtering, interface behavior, or output stage capability, helping designers verify compatibility before modifying an existing PCB.

RFQ پەیوەندی
PCM1720E - 24-Bit 96kHz Stereo Audio DAC | Texas Instruments
PCM1720E

PCM1720E - 24-Bit 96kHz Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1720E is a 24-bit, 96kHz stereo audio digital-to-analog converter with an integrated digital filter and output amplifier, supplied in a 20-pin SSOP package. The device accepts 24-bit audio data and is compatible with MPEG2 and AC-3 audio formats. Its 96dB dynamic range and support for 8x oversampling at every supported sampling frequency position it for high-quality digital audio reproduction, data-acquisition equipment, and consumer audio systems. A digital-to-analog converter, or DAC, is an interface integrated circuit that converts digital audio samples into an analog voltage signal. In the signal hierarchy, a DAC belongs to the ADC/DAC class of data-converter ICs and ultimately to the broader semiconductor and signal-processing categories. The PCM1720E provides a complete stereo conversion path by combining input-format handling, digital filtering, oversampling, and output-amplifier functions in one device. The PCM1720E accepts 24-bit input data and operates with sampling rates up to 96kHz. According to the manufacturer PCM1720 datasheet, the converter supports 8x oversampling at all sampling frequencies. Its specified dynamic range is 96dB, while system-clock operation is supported at 256fS and 384fS. These features make the device appropriate for designs requiring a conventional stereo I2S audio path rather than a high-resolution multichannel codec. The 20-pin SSOP package provides a compact surface-mount implementation for multichannel consumer electronics, audio adapters, digital mixing equipment, and instrumentation. The verified source data describes the package as SSOP with 20 terminals and a gull-wing form. Power-supply sequencing, output coupling, ground handling, and clock jitter remain important design considerations because these parameters directly affect the integrity of the recovered analog audio signal. Typical uses include decoding MPEG2 or AC-3 streams, reproducing stereo music through an analog amplifier, and serving as the analog-output stage in digital audio acquisition systems. In these applications, the PCM1720E accepts the digital audio stream, applies its internal oversampling and digital filtering, and produces left and right analog outputs through its integrated output amplifier. Designers should place the PCM1720E close to its digital source and analog output circuitry, maintain the required bypass and filtering components recommended by the manufacturer datasheet, and route analog and digital return currents carefully. The datasheet is the controlling reference for pin assignments, supported data formats, clock requirements, output configuration, and electrical limits. This page consolidates the verified distributor specifications, package information, pricing references, comparison candidates, and practical design guidance for PCM1720E evaluation. It also clearly separates confirmed data from parameters that still require confirmation from the complete manufacturer datasheet.

RFQ پەیوەندی
PCM1720E/2K - 24-Bit 96kHz Stereo DAC | Texas Instruments
PCM1720E/2K

PCM1720E/2K - 24-Bit 96kHz Stereo DAC | Texas Instruments

The Texas Instruments PCM1720E/2K is a 24-bit, two-channel stereo audio digital-to-analog converter with a maximum sampling rate of 96 kHz, an I2S-compatible digital interface, and a 96 dB dynamic range. The device is packaged in a 20-pin SSOP and is identified as an MPEG2/AC-3-compatible stereo DAC. It accepts 16-bit or 24-bit input data, operates with system-clock ratios of 256fS or 384fS, and applies 8x oversampling at all supported sampling frequencies. A stereo audio DAC is a signal-conversion integrated circuit that transforms digital PCM audio samples into two analog output signals. In the wider electronics hierarchy, this SoundPlus device belongs to the digital-to-analog converter class within audio interface ICs and broader signal-processing semiconductors. Its role is typically the final digital-to-analog conversion stage between an audio processor, receiver, set-top box, or digital source and a speaker amplifier or line-level audio circuit. The principal features of the PCM1720E/2K are 24-bit resolution, two output channels, a 96 kHz maximum sampling frequency, and 96 dB dynamic range. Its digital filter and output amplifier are integrated, allowing a compact implementation without separate external filter and output-amplifier stages. The I2S interface simplifies connection to digital audio processors, while support for both 16-bit and 24-bit source data accommodates consumer and professional signal chains operating at different word lengths. System-clock architecture uses 256fS or 384fS ratios, with the required master clock derived from the audio sampling rate. The internal digital filtering and 8x oversampling architecture support conversion of MPEG2/AC-3-compatible digital audio streams. For system integration, the important consideration is ensuring that the processor supplies a compatible I2S word format, correct clock relationship, and valid channel sequencing. The integrated output stage then provides the analog stereo signals for downstream amplification. Typical uses include home-theater audio decoding, digital television equipment, set-top boxes, MPEG2 or AC-3 audio paths, consumer stereo receivers, and other multimedia systems that convert digital audio to analog stereo. The device is particularly relevant when the source supports up to 96 kHz sampling and the design requires a compact two-channel DAC rather than a multichannel audio processor. PCB implementation should place input and output decoupling close to their associated pins, keep the I2S and system-clock routing short, and provide a quiet ground reference for the analog outputs. Signal-integrity and ground-plane decisions are especially important when the digital interface and analog output path share the same board. Designers should also confirm the external analog-network and output-loading requirements shown in the manufacturer application circuit. This product record combines the identified converter functions, package information, sampling and clock characteristics, lifecycle information, and practical integration guidance. It also separates verified drop-in alternatives from merely similar devices, providing a consistent basis for sourcing, schematic review, PCB design, and audio-system component selection.

RFQ پەیوەندی
PCM1723E - 24-Bit 96kHz Stereo DAC | Texas Instruments
PCM1723E

PCM1723E - 24-Bit 96kHz Stereo DAC | Texas Instruments

The Texas Instruments PCM1723E is a 24-bit stereo audio digital-to-analog converter with a 96 kHz maximum sampling rate, integrated phase-locked loop, digital interpolation filter, and analog output amplifier in a 24-pin SSOP package. It accepts 16-, 20-, or 24-bit input data in normal or I2S formats and supports sampling rates from 16 kHz through 96 kHz. The integrated PLL derives either 256fS or 384fS system clock from an external 27 MHz reference frequency. An audio DAC is a semiconductor that converts digital audio samples into analog voltage signals suitable for headphone, line, or power-amplifier inputs. In the signal-chain hierarchy, PCM1723E is a stereo DAC, which belongs to the broader digital-to-analog converter, audio converter IC, interface IC, and semiconductor categories. Its integrated PLL reduces the need for a separate clock-generation circuit when the system provides the required 27 MHz reference. The PCM1723E accepts several native word lengths and multiple standard sampling rates, making it suitable for consumer audio equipment, computers, televisions, and digital audio systems. According to the supplied manufacturer and distributor information, it accepts 16-, 20-, or 24-bit data, supports 16, 22.05, 24, 32, 44.1, 48, 64, 88.2, and 96 kHz sampling rates, and provides a 94 dB dynamic-range figure in the available datasheet summary. Internally, the converter uses a third-order Delta-Sigma modulator, a digital interpolation filter, and an analog output amplifier. This architecture converts the digital PCM stream into a pair of analog stereo outputs while the programmable PLL synchronizes the converter to an external reference. The PCM1723 family description also identifies 96 dB SNR for PCM1723E, providing a more useful system-level indication than bit depth alone. Typical uses include DVD and CD player analog outputs, digital television audio, personal-computer multimedia systems, home-theater equipment, and other consumer electronics requiring two-channel audio playback. The 24-pin SSOP package also supports compact board layouts, although its lead pitch and thermal behavior must be considered during PCB assembly. When designing around the PCM1723E, provide the required external 27 MHz reference and route it cleanly to the device. Confirm that the audio master clock, serial data, and I2S or normal-format timing meet the selected sample-rate requirements. Decoupling and analog-output grounding should follow the layout guidance in the manufacturer datasheet to preserve converter performance. This product record consolidates manufacturer specifications, distributor pricing, sourcing data, and verified family references into an engineer-focused comparison. It also distinguishes the directly evidenced PCM1723E/2K variant from speculative replacements, preventing a package-only assumption from being presented as guaranteed pin compatibility.

RFQ پەیوەندی
PCM1725D - 16-Bit 96kHz Stereo DAC | Texas Instruments
PCM1725D

PCM1725D - 16-Bit 96kHz Stereo DAC | Texas Instruments

The Texas Instruments PCM1725D is a 16-bit stereo audio digital-to-analog converter with a maximum sampling rate of 96kHz and an I2S serial interface, packaged in a 14-SOIC package. According to the Texas Instruments product page, the device provides 97dB signal-to-noise ratio and includes a digital filter and output amplifier as part of the complete stereo DAC signal chain. An audio DAC is a converter that transforms digital PCM audio samples into continuous analog voltage signals suitable for headphone, speaker, mixer, or line-level amplification. The PCM1725D belongs to the broader digital-to-analog converter category, where the ADC/DAC hierarchy serves as the interface between digital signal processing and the analog audio domain. Its serial interface reduces the number of data connections required when connecting to an audio processor. The primary characteristics are 16-bit resolution, 96kHz maximum sampling, I2S data transfer, and a 14-SOIC package. Supplier listings also describe the device as a complete stereo DAC with an integrated digital filter and output amplifier, eliminating the need to describe those functional blocks as separate external devices. These features support consumer and industrial audio systems requiring a conventional high-resolution serial DAC architecture. Texas Instruments identifies the PCM1725 family as a 97dB-SNR stereo DAC, while one distributor datasheet listing states 95dB dynamic range. These figures describe different performance quantities and should not be treated as interchangeable measurements. The verified operating-temperature listing is -25°C to 85°C, and the package is identified as a 14-SOIC measuring 0.154 inch, or 3.90mm, in width. Typical uses include digital audio playback, multimedia equipment, audio acquisition, active speaker systems, and external digital-to-analog conversion. In these systems, the PCM1725D accepts digital audio from an audio codec or processor and produces left and right analog outputs. A downstream amplifier is still required to drive speakers or headphones at useful output levels. Designers should confirm the required digital-audio format, sample rate, supply arrangement, analog output implementation, and PCB land pattern from the manufacturer datasheet before layout. The 14-SOIC footprint and single-supply listing should be treated as the starting point for schematic capture, while detailed pin names, exposed conditions, and application-specific decoupling values require verification against the official documentation.

RFQ پەیوەندی
PCM1725DR - 16-Bit 96kHz Stereo DAC | Texas Instruments (Tape & Reel)
PCM1725DR

PCM1725DR - 16-Bit 96kHz Stereo DAC | Texas Instruments (Tape & Reel)

The Texas Instruments PCM1725DR is a 16-bit stereo audio digital-to-analog converter with a maximum sampling rate of 96kHz and an I2S serial interface, packaged in a 14-SOIC package. According to the Texas Instruments product page, the device provides 97dB signal-to-noise ratio and includes a digital filter and output amplifier as part of the complete stereo DAC signal chain. An audio DAC is a converter that transforms digital PCM audio samples into continuous analog voltage signals suitable for headphone, speaker, mixer, or line-level amplification. The PCM1725DR belongs to the broader digital-to-analog converter category, where the ADC/DAC hierarchy serves as the interface between digital signal processing and the analog audio domain. Its serial interface reduces the number of data connections required when connecting to an audio processor. The primary characteristics are 16-bit resolution, 96kHz maximum sampling, I2S data transfer, and a 14-SOIC package. Supplier listings also describe the device as a complete stereo DAC with an integrated digital filter and output amplifier, eliminating the need to describe those functional blocks as separate external devices. These features support consumer and industrial audio systems requiring a conventional high-resolution serial DAC architecture. Texas Instruments identifies the PCM1725 family as a 97dB-SNR stereo DAC, while one distributor datasheet listing states 95dB dynamic range. These figures describe different performance quantities and should not be treated as interchangeable measurements. The verified operating-temperature listing is -25°C to 85°C, and the package is identified as a 14-SOIC measuring 0.154 inch, or 3.90mm, in width. Typical uses include digital audio playback, multimedia equipment, audio acquisition, active speaker systems, and external digital-to-analog conversion. In these systems, the PCM1725DR accepts digital audio from an audio codec or processor and produces left and right analog outputs. A downstream amplifier is still required to drive speakers or headphones at useful output levels. Designers should confirm the required digital-audio format, sample rate, supply arrangement, analog output implementation, and PCB land pattern from the manufacturer datasheet before layout. The 14-SOIC footprint and single-supply listing should be treated as the starting point for schematic capture, while detailed pin names, exposed conditions, and application-specific decoupling values require verification against the official documentation.

RFQ پەیوەندی
PCM1725U - 16-Bit Stereo 96kHz Audio DAC | Texas Instruments
PCM1725U

PCM1725U - 16-Bit Stereo 96kHz Audio DAC | Texas Instruments

Texas Instruments PCM1725U is a 16-bit stereo audio digital-to-analog converter with 97 dB signal-to-noise ratio, a maximum sampling rate of 96 kS/s, an I2S-compatible serial interface, and a 14-pin SOIC package. The device operates from a single 5 V supply, with the supplied data specifying a 4.5 V to 5.5 V operating range. Its delta-sigma conversion architecture produces analog stereo output from digital audio data while supporting the sample rates commonly required by CD, consumer audio, communications, and embedded audiovisual systems. An audio DAC is a mixed-signal semiconductor that converts PCM-coded digital audio into left- and right-channel analog voltage signals. In the product hierarchy, PCM1725U is a stereo audio DAC within the ADC/DAC category, which combines digital signal processing, conversion technology, and analog output circuitry. The I2S interface carries framed audio data and clock signals between a digital audio source and the converter, while the DAC reconstructs continuous analog waveforms for subsequent amplification or line-level output. The PCM1725U's headline specifications are 16-bit resolution, 96 kS/s sampling, 97 dB SNR, stereo output, and a 4.5 V to 5.5 V single-supply range. The 97 dB SNR rating is particularly useful when selecting a DAC for audio paths where quantization and conversion noise can affect perceived signal quality. The 96 kS/s maximum sampling rate supports higher-rate digital audio sources, including 48 kS/s and 88.2 kS/s standard-rate material and 96 kS/s high-resolution streams. The delta-sigma modulator is the core conversion technique used in this device. Digital audio samples enter through the serial interface, where the delta-sigma modulation process reduces unwanted quantization noise within the signal bandwidth. The resulting analog outputs are intended to be conditioned by a suitable reconstruction and output stage. This architecture supports the stated 16-bit data resolution and 97 dB SNR while maintaining a conventional serial-audio interface. Typical uses include digital audio player subsystems, USB or network-audio decoding, CD player output stages, industrial audio consoles, and communication equipment. The stereo format supports simultaneous left and right outputs, while the I2S interface simplifies connection to audio processors, DSPs, and microcontrollers that provide compatible serial data and clocks. The single 5 V supply also reduces the number of external rails required when the surrounding system already operates around 5 V. A key implementation consideration is preserving the quality of the digital and analog paths around the converter. Place the PCM1725U close enough to the source interface for clean clock and data routing, and follow the manufacturer reference layout and component-selection guidance for decoupling, output filtering, and grounding. Because the available verified data does not expose the full pin table, output-current limits, or recommended external-component values, those details should be confirmed in the official PCM1725 datasheet before layout release. This page combines the verified 16-bit, 97 dB, 96 kS/s, I2S, supply-range, and package facts with practical application guidance, verified-source links, and a transparent assessment of the available drop-in cross-reference data. It is intended to help engineers identify whether the PCM1725U matches a stereo DAC requirement without obscuring unspecified electrical details.

RFQ پەیوەندی
PCM1727E - 24-Bit 96kHz Stereo DAC with Dual PLL | TI
PCM1727E

PCM1727E - 24-Bit 96kHz Stereo DAC with Dual PLL | TI

The Texas Instruments PCM1727E is a stereo digital-to-analog converter with 24-bit input data, a 96 kHz maximum sampling rate, I2S support, and a programmable dual PLL in a 24-pin SSOP package. It provides 92 dB dynamic range and integrates a complete stereo DAC, digital filter, and output amplifier for audio signal conversion. An audio DAC is a semiconductor that converts digital audio samples into an analog voltage waveform suitable for amplification and loudspeaker output. The PCM1727E belongs to the broader digital-to-analog converter hierarchy, where delta-sigma conversion, digital filtering, clock recovery, and analog output circuitry combine to support high-fidelity audio playback. The principal features include support for 24-bit input data, multiple sampling frequencies with a stated maximum of 96 kHz, 92 dB dynamic range, and a programmable dual PLL. The PLL architecture provides clock-related flexibility for systems receiving audio data from an asynchronous or otherwise differently referenced source. The integrated stereo output path reduces the number of external analog stages required in a basic DAC design. The PCM1727E accepts 24-bit digital audio data through I2S. Its integrated digital filter and output amplifier make the device suitable for compact stereo audio systems where the converter must operate from a single supply and connect to a downstream line or headphone amplifier. The programmable dual PLL is especially useful when the digital audio source and converter require separate or adjustable clock domains. Typical uses include CD and DVD playback, digital audio mixers, active speakers, home-theater equipment, professional audio interfaces, and embedded audio systems. The device can serve as the final stereo conversion stage when a digital source produces I2S audio and the analog output is intended for a line-level amplifier or other downstream audio path. Designers should verify the datasheet’s recommended input, output, filtering, and bypass connections before layout. Because the provided verified data does not include the complete pin mapping or electrical limits, pin assignments, supply voltage, analog output level, and decoupling values must be confirmed directly in the manufacturer datasheet rather than inferred from the product listings. This product record combines the verified 24-bit, 96 kHz, 92 dB, I2S, dual-PLL, and 24-pin SSOP characteristics with practical selection guidance, source traceability, and honest identification of electrical details that still require datasheet confirmation.

RFQ پەیوەندی
PCM1727E-2 - 24-Bit Stereo DAC with Dual PLL | Texas Instruments
PCM1727E-2

PCM1727E-2 - 24-Bit Stereo DAC with Dual PLL | Texas Instruments

Texas Instruments PCM1727E-2 is a stereo audio digital-to-analog converter with a programmable dual PLL, accepting 24-bit audio data and supporting sampling rates up to 96 kHz. It is housed in a 24-pin SSOP package and combines the digital filter, stereo DAC, and output amplifier in one device. The converter provides a 92 dB dynamic range for consumer and professional audio systems requiring a compact, integrated audio output stage. An audio DAC converts digital PCM samples into left- and right-channel analog voltage signals suitable for amplification, mixing, or line-level output. The PCM1727E-2 belongs to the SoundPlus stereo DAC family, where the DAC core, digital reconstruction filter, and output amplifiers operate together to convert I2S-format audio data. Its programmable dual PLL supports multiple sampling frequencies, making it useful in systems that must accept several clock domains or source rates. The 24-bit input interface supports high-resolution audio, while the 96 kHz maximum sampling frequency provides a useful margin for CD-quality and higher-rate digital audio paths. A 92 dB dynamic range defines the converter's signal-to-noise performance and helps preserve low-level musical detail. Integrating the output amplifier with the stereo DAC reduces the number of external active components required in many line-output designs. The programmable dual PLL is the principal clock-management feature. By supporting multiple sampling frequencies, it allows one stereo DAC design to operate with different digital sources or system clock arrangements. Designers must still configure the serial interface, sample rate, filter characteristics, and analog output path correctly for the intended audio format. Typical uses include stereo CD players, digital television audio outputs, home-theater equipment, multimedia speakers, USB or network audio interfaces, and embedded audio systems. The 24-pin SSOP package is also appropriate for compact consumer electronics where the converter must provide two analog channels without occupying multiple external codec packages. For layout, place the digital interface and clock connections away from the analog output traces, provide a clean supply reference at the device, and follow the manufacturer datasheet's recommended decoupling and output-filter network. Correct grounding and short analog paths help preserve the converter's 92 dB dynamic-range capability in the finished system. This product page combines the PCM1727E-2's core audio specifications, a package-aware comparison with PCM1727E, practical integration guidance, and focused selection criteria for engineers evaluating 24-bit, 96 kHz stereo DAC implementations.

RFQ پەیوەندی
PCM1727E/2K - 24-Bit Stereo DAC with Dual PLL | Texas Instruments
PCM1727E/2K

PCM1727E/2K - 24-Bit Stereo DAC with Dual PLL | Texas Instruments

Texas Instruments PCM1727E/2K is a 24-bit stereo audio digital-to-analog converter with programmable dual phase-locked loops, supporting sampling rates up to 96 kHz and packaged in a 24-pin SSOP. It accepts 16-bit or 24-bit digital audio data, integrates the digital filter and output amplifier, and supports I2S-format audio interfaces. An audio DAC is a signal-conversion integrated circuit that translates digital audio samples into analog voltages suitable for an audio amplifier, mixer, headphones, or line-level output stage. The DAC belongs to the broader digital-to-analog converter, audio converter, signal-chain, and semiconductor hierarchies. Its dual-PLL architecture helps derive or recover the timing required between the digital audio source and the stereo conversion outputs. The principal advantages of PCM1727E/2K include 24-bit data acceptance, a maximum 96 kHz sampling rate, stereo output, integrated output amplifiers, and programmable dual PLL operation. A manufacturer datasheet excerpt identifies a dynamic range of 92 dB. These characteristics make the device applicable to compact consumer-audio systems, digital source equipment, compact audio consoles, and designs that need a clocking structure more flexible than a fixed-rate interface. Technically, the converter accepts digital audio through an I2S-compatible interface and uses its programmable dual PLL to support system clock arrangements. The integrated digital filter and output amplifier reduce the number of external signal-path blocks required around the DAC. The 24-SSOP package measures approximately 0.209 inch, or 5.30 mm, in body width and uses gull-wing leads, according to the component listing. Typical applications include CD and DVD audio-source boards, digital mixing consoles, multimedia speakers, stereo receiver modules, and equipment that reconstructs 96 kHz digital audio. For systems using another codec or interface controller, the audio data format, master or slave clock relationship, and supported sampling rate must be checked against the manufacturer’s application information before PCB release. A critical layout consideration is keeping digital clock and data traces away from the analog output traces. Place the required bypass and decoupling capacitors close to their associated supply pins, maintain a quiet analog return path, and route analog outputs away from switching nodes. The 24-pin SSOP footprint also requires adequate lead spacing and solderability review when the board is assembled. This product record combines the exact orderable MPN, verified 24-SSOP package information, digital-audio specifications, practical layout guidance, and a qualification-focused comparison with related PCM1727-family devices. It is intended to accelerate sourcing and design review while making compatibility checks explicit before any replacement is approved.

RFQ پەیوەندی
PCM1728E - 24-Bit 96kHz Stereo Audio DAC | Texas Instruments
PCM1728E

PCM1728E - 24-Bit 96kHz Stereo Audio DAC | Texas Instruments

Texas Instruments PCM1728E is a 24-bit, 96kHz sampling CMOS delta-sigma stereo digital-to-analog converter designed for mid- to high-grade digital audio applications. The device provides two audio DAC channels, I2S-compatible digital audio input, 106dB SNR, and a 28-pin SSOP package. According to the Texas Instruments PCM1728 datasheet, the PCM1728 uses an enhanced multi-level delta-sigma modulator architecture that improves dynamic performance and reduces jitter sensitivity in practical audio systems. Its internal digital filter operates at 8X oversampling when the sampling frequency is 96kHz. The PCM1728 belongs to the digital-to-analog converter hierarchy within audio signal-chain semiconductors. More specifically, it is a CMOS delta-sigma audio DAC that accepts digital audio samples and reconstructs two analog left and right output channels. The SoundPlus architecture is intended to provide high-resolution playback from compact digital audio systems, including consumer audio equipment, USB audio interfaces, digital mixers, powered speakers, and automotive or industrial audio control systems. The principal device ratings visible in the verified manufacturer and distributor information are 24-bit audio data width, a 96kHz sampling rate, stereo operation, 106dB SNR, and a 28-pin SSOP package. The enhanced multi-level delta-sigma modulator is specifically described as reducing jitter sensitivity in actual applications. This makes the converter relevant where timing errors from the digital audio source, interconnect, or clocking path could otherwise degrade playback quality. The internal 8X oversampling filter further defines the digital signal-processing behavior at the 96kHz operating condition. PCM1728E is supplied in the TI DB package designation as a 28-pin SSOP. The verified TI part page identifies the device as a 106dB SNR stereo DAC, while the DigiKey listing identifies PCM1728E as a 24-bit, 96kHz I2S audio DAC in a 28-pin SSOP. These same sources provide the basis for the technical description, lifecycle classification, package selection, and source traceability used on this page. Detailed electrical limits, clock requirements, analog-output topology, and pin assignments should be confirmed in the manufacturer datasheet before design release. Typical applications include USB and interface audio products, network and multimedia players, stereo digital mixers, powered loudspeakers, home-audio equipment, and embedded audio consoles. In each case, the 24-bit data path and 96kHz maximum sampling rate support high-resolution digital audio playback, while the two-channel architecture reduces the need for separate converters in conventional stereo products. The primary design consideration is interface compatibility. A design must provide the required digital audio format, clocking, and supported sampling rate, while the analog output network must be designed around the converter’s recommended loading and output circuitry. Decoupling, grounding, and analog-versus-digital layout segregation should follow the manufacturer datasheet’s reference configuration. This page additionally synthesizes verified sourcing information, replacement guidance, application fit, and engineering selection notes rather than repeating only the basic ordering description.

RFQ پەیوەندی
PCM1728E/2K 24-Bit 96kHz Stereo I2S DAC | Texas Instruments
PCM1728E/2K

PCM1728E/2K 24-Bit 96kHz Stereo I2S DAC | Texas Instruments

The Texas Instruments PCM1728E/2K is a 24-bit, 96kHz sampling CMOS delta-sigma stereo audio digital-to-analog converter with an I2S interface, packaged in a 28-pin SSOP (DB) package. It is designed for digital audio systems requiring two-channel analog output from an I2S-compatible source, including consumer audio equipment, communications systems, and embedded audio products. A stereo DAC is a digital-to-analog converter that accepts digital audio samples and produces left- and right-channel analog signals. The PCM1728E/2K belongs to the broader ADC/DAC and audio interface IC hierarchy, combining a digital audio interface with two analog output channels. Its 24-bit resolution supports high-fidelity audio data formats, while the 96kHz sampling capability provides sufficient bandwidth for CD-quality and other high-rate digital audio streams. The PCM1728E/2K uses an I2S serial interface for receiving digital audio data. This interface is widely used in audio processors, receivers, CD/DVD systems, digital mixing equipment, and other embedded audio platforms. The device is implemented in CMOS and is identified in the product documentation as a 24-bit, 96kHz sampling delta-sigma stereo DAC. The package is the TI 28-pin SSOP DB configuration. The /2K ordering suffix identifies the particular TI orderable package variant. The PCM1728E family is listed by TI as a 106dB SNR stereo DAC with 28 pins in the SSOP DB package. The PCM1728E/2K listing identifies the part as a 24-bit, 96kHz I2S stereo DAC in a 28-SSOP package. Typical applications include CD/DVD player audio outputs, digital audio receivers, home theater and multimedia equipment, communications terminals, and embedded audio subsystems. Because the converter is a stereo DAC, system designers must provide compatible digital audio timing and data signals and must implement the required analog output and power-supply arrangements described in the manufacturer datasheet. When laying out a circuit around the PCM1728E/2K, keep digital and analog routing separated, place bypass and decoupling capacitors close to the relevant supply pins, and preserve the package-specific exposed-pin and thermal-land requirements shown in the TI package documentation. Because the exact pin names, voltage ratings, output architecture, and application circuit values are not reproduced in the available product excerpts, use the manufacturer datasheet and package drawing when assigning PCB nets and component values. This product summary combines the manufacturer product listing, distributor catalog information, and the PCM1728E family identity to help engineers identify the correct stereo DAC and verify package, resolution, sampling-rate, and interface requirements before layout or procurement.

RFQ پەیوەندی
PCM1728EG4 - 24-Bit 96kHz Stereo Audio DAC | TI
PCM1728EG4

PCM1728EG4 - 24-Bit 96kHz Stereo Audio DAC | TI

The Texas Instruments PCM1728EG4 is a 24-bit, 96kHz stereo audio digital-to-analog converter with I2S serial input, 106dB signal-to-noise ratio, and a 5V supply requirement, housed in a 28-SSOP package measuring 0.209 inches wide and 5.30mm. It is designed for digital audio systems that require a dedicated stereo DAC stage with a high-resolution data path. A digital-to-analog converter, or DAC, is a semiconductor that converts digital audio samples into left and right analog voltage signals. In the broader hierarchy, it belongs to the ADC/DAC family within integrated circuits and serves as the bridge between a digital audio source such as a receiver, processor, or interface and an analog amplifier, mixer, or loudspeaker system. PCM1728EG4 supports the common I2S format for serial digital audio transmission. The primary specifications are 24-bit resolution, a maximum sampling rate of 96kHz, stereo operation, and 106dB SNR. These figures make the converter suitable for consumer audio equipment, digital media systems, and compact stereo playback designs. The 5V operating supply and 28-SSOP surface-mount format support conventional analog-audio board layouts where a compact multibit conversion stage is required. This device separates digital audio ingestion from the analog output stage. I2S data, clock, and word-select signals enter the converter, while separate left and right analog outputs are produced for downstream amplification. The 96kHz sampling capability accommodates source material encoded at 48kHz through 96kHz rates, and the 24-bit interface represents the numerical precision of each audio sample. Typical applications include stereo CD or DVD playback electronics, digital audio receivers, active speakers, karaoke equipment, and digital mixer output modules. It can also serve as a local decoding stage in a receiver that accepts digital audio from a source processor. In each case, the converter is placed after the digital audio routing network and before the analog volume-control or amplifier circuitry. PCB design should provide a clean digital return path to the converter and decouple the 5V supply close to the power pin. Analog output routing should be kept short and physically separated from digital clock and data traces. Output filtering and downstream amplifier selection remain important because the DAC's measured 106dB SNR establishes the converter-stage noise baseline for the complete audio path. This product page consolidates the PCM1728EG4's principal format, resolution, sampling-rate, package, and SNR characteristics with verified sourcing information, equivalent-part guidance, and practical design considerations. It is intended to help engineers identify the correct converter, plan its implementation, and evaluate whether its electrical and packaging characteristics fit a stereo audio design.

RFQ پەیوەندی
PCM1730E - 24-Bit 192kHz Stereo DAC | Texas Instruments
PCM1730E

PCM1730E - 24-Bit 192kHz Stereo DAC | Texas Instruments

The Texas Instruments PCM1730E is a 24-bit, 192 kHz sampling stereo digital-to-analog converter with balanced current outputs, housed in a 28-lead SSOP package. It uses advanced segment DAC architecture to provide strong dynamic performance and improved tolerance to clock jitter, making it suitable for professional audio, consumer audio, and digital playback systems. A digital-to-analog converter, or DAC, converts digital audio samples into an analog voltage or current representation. The PCM1730E belongs to the DAC hierarchy within ADC/DAC and signal-conversion integrated circuits. Unlike a digital signal processor or codec, it performs the final conversion from a digital audio stream to analog stereo outputs. Its balanced current-output architecture provides two complementary channels and can simplify the design of high-performance analog output stages. The PCM1730E supports 24-bit audio data at sampling rates up to 192 kHz. The supplied distributor data reports typical dynamic range and signal-to-noise ratio of 117 dB, typical THD+N of 0.0004%, and a full-scale differential current output of 2.2 Vrms at the post amplifier. These figures make the converter relevant to applications where low distortion and high dynamic range are more important than low cost or minimal package size. Advanced segment DAC architecture is the central technical feature of the device. According to the Texas Instruments product description, this architecture is intended to achieve excellent dynamic performance and improved tolerance to clock jitter. That behavior is particularly useful when the digital audio clock is generated through a divider, PLL, or other system that may increase timing jitter. The converter accepts I2S-format digital audio according to the distributor listing, while the manufacturer describes support circuitry integrated with the stereo DAC core. Typical uses include CD and DVD player output stages, digital mixing consoles, active loudspeaker electronics, USB and network audio interface output sections, and high-fidelity consumer audio equipment. In these systems, the PCM1730E can be paired with a current-to-voltage converter, an audio output amplifier, or a headphone and line-driver stage. The choice of external circuitry must account for output loading, gain, distortion, and the required balanced or single-ended signal path. A critical design consideration is that converter performance depends on the complete analog and digital signal chain, not on the DAC alone. Clean supplies, a low-jitter master clock, correctly implemented digital interfaces, suitable output filtering, and a low-noise post-amplifier help preserve the reported 117 dB dynamic performance. Board layout should keep digital and analog return paths controlled and provide a low-impedance return for every supply pin. This product record combines manufacturer architecture information, distributor specifications, sourcing links, verified data gaps, and engineering-focused design guidance. It also distinguishes verified drop-in alternatives from devices that merely share a package or audio function, preventing a package-level match from being presented as a guaranteed PCB replacement.

RFQ پەیوەندی
PCM1730E/2K - 24-Bit 192kHz Stereo DAC | Texas Instruments
PCM1730E/2K

PCM1730E/2K - 24-Bit 192kHz Stereo DAC | Texas Instruments

The Texas Instruments PCM1730E/2K is a 24-bit, 192-kHz-sampling stereo digital-to-analog converter with balanced current outputs, I2S support, and a 28-lead SSOP package. It uses advanced-segment DAC architecture, delivers typically 117 dB dynamic range and 117 dB signal-to-noise ratio, and specifies typically 0.0004% total harmonic distortion plus noise. The /2K ordering code specifies a 2,000-piece tape-and-reel shipment. An audio DAC is a digital-to-analog converter within the ADC/DAC and signal-conversion semiconductor hierarchy. Its role is to reconstruct continuous analog voltage waveforms from sampled digital audio data. The PCM1730 combines two conversion channels with support circuitry in one CMOS monolithic circuit, providing a compact interface between a digital audio engine and a balanced analog output stage. The principal features of the PCM1730E/2K include 24-bit resolution, operation up to 192 kHz, advanced-segment DAC architecture, balanced current outputs, and improved tolerance to clock jitter. Its two-channel architecture suits stereo audio paths, while the current-output interface allows the output stage to determine voltage gain and load compatibility. The manufacturer describes the converter as suitable for professional and high-fidelity audio applications where dynamic performance and jitter tolerance are important. The advanced-segment architecture is the converter's principal technical feature. Segment DAC operation divides the conversion task into smaller current-steering elements, supporting high-resolution audio reproduction and improved clock-jitter tolerance. Balanced outputs provide two signal conductors per channel in the analog domain, supporting common-mode-noise rejection when connected to a suitable differential input or balanced output circuit. Typical uses include CD and DVD player audio paths, professional audio equipment, digital mixing consoles, multichannel home-theater systems, and other stereo equipment accepting I2S digital audio. The 28-lead SSOP package supports compact, surface-mount construction, but analog output routing requires careful separation from digital clock and data traces. The balanced outputs also require a compatible reconstruction and post-amplifier circuit rather than direct connection to a conventional speaker. PCB implementation should preserve the integrity of the system clock, serial data, and analog output connections. Keep digital routing away from the current-output pins and associated post-amplifier nodes, use a low-noise analog supply, and follow the manufacturer application circuit for output-current-to-voltage conversion. Because the package has a narrow lead pitch, inspect assembled joints carefully and confirm that the PCB land pattern matches the 28-lead SSOP footprint. This page combines the PCM1730E/2K electrical characteristics, ordering information, family comparison, and application guidance with practical design notes for evaluating the converter in a 192-kHz stereo audio design.

RFQ پەیوەندی
PCM1733U - 18-Bit 96 kHz Stereo Audio DAC | Texas Instruments
PCM1733U

PCM1733U - 18-Bit 96 kHz Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1733U is an 18-bit stereo audio digital-to-analog converter with a maximum sampling rate of 96 kHz, an I2S-compatible digital audio interface, and a 14-pin SOIC (D) package. The device is designed to convert digital audio data into left- and right-channel analog signals for consumer and professional audio equipment, while its 97 dB SNR specification supports high-fidelity signal reproduction. The supplied ordering information identifies PCM1733U as the standard 14-SOIC version of the PCM1733 SoundPlus stereo DAC family. An audio DAC is a semiconductor that accepts digital PCM audio samples and reconstructs their corresponding analog voltages. In the electronic-component hierarchy, an audio DAC belongs to the broader ADC/DAC conversion IC category and ultimately falls within signal-processing semiconductors. This distinction matters because a DAC does not amplify or generate the source recording; it converts encoded digital samples into an analog output that can drive a headphone, line-level, or downstream audio amplification stage. The PCM1733U provides 18-bit resolution, 96 kHz sampling, stereo operation, and an I2S interface. Its 97 dB SNR rating describes the signal-to-noise performance available to downstream analog circuitry. The part is listed with a single 5 V supply and an operating temperature range of -25°C to +85°C in the verified distributor data. Its 14-pin SOIC package supports conventional surface-mount PCB assembly and is compatible with automated pick-and-place and reflow processes. At the digital side, the PCM1733U accepts serial audio data through its I2S interface, reducing the number of interconnects required compared with a parallel audio converter. The 18-bit word length provides finer numerical granularity than a 16-bit converter, while 96 kHz supports the stated sampling rate required by CD-quality audio formats. At the analog side, the converter produces differential stereo outputs, allowing the output network and audio amplifier to reject common-mode disturbances when the circuit is designed accordingly. Typical applications include stereo CD and DVD playback, digital audio receivers, mini-disc systems, home-theater equipment, active speakers, and other consumer audio products. In each application, the PCM1733U can serve as the final digital-to-analog conversion stage before a low-noise line amplifier or headphone driver. A complete design must still provide suitable clocking, decoupled analog and digital supplies, a correctly designed reconstruction or output filter, and short signal paths to minimize noise pickup. For PCB implementation, keep the digital interface traces away from the analog outputs and place input, output, and bypass capacitors close to their associated pins. Verify the supported master-clock and sample-rate requirements against the manufacturer datasheet before fixing system clock architecture. If output circuitry differs between the original design and a replacement candidate, evaluate DC offset, full-scale amplitude, and filter response rather than assuming that the same package guarantees identical behavior. This product data consolidates the verified manufacturer and distributor information, provides application-specific engineering context, and separates documented specifications from values that remain unavailable. It also highlights the main substitution risk: a 14-pin SOIC footprint alone does not prove that every stereo DAC is pin-to-pin, clock-compatible, and output-compatible with the PCM1733U.

RFQ پەیوەندی
PCM1733U/2K 18-Bit 96kHz Stereo DAC | Texas Instruments
PCM1733U/2K

PCM1733U/2K 18-Bit 96kHz Stereo DAC | Texas Instruments

Texas Instruments PCM1733U/2K is an 18-bit stereo audio digital-to-analog converter with a 96 kHz sampling rate, I2S digital audio interface, and 14-pin SOIC package. Designed for high-fidelity audio signal conversion, it combines a digital filter, integrated output amplifier, and voltage-output stereo DAC in a single surface-mount device. The supported single-supply operation is 5 V. An audio DAC is a converter in the signal-chain hierarchy that transforms digital audio samples into analog voltage signals capable of driving audio amplification or line-level circuitry. The PCM1733 family belongs to the broader category of digital-to-analog converters, which form the output stage between digital audio sources and analog loudspeaker or headphone amplifiers. Key characteristics include 18-bit resolution, a maximum sampling frequency of 96 kHz, an I2S serial interface, 95 dB dynamic range, and an integrated stereo output amplifier. The internal digital filter supports 8-times oversampling, helping move quantization noise away from the audio passband. A single 5 V supply simplifies analog and digital power planning in conventional consumer and professional audio equipment. The converter uses a delta-sigma architecture and voltage output. Its digital section communicates through I2S, while the analog section produces left- and right-channel outputs from integrated output amplifiers. This integration reduces the external component count compared with a discrete converter design, although analog-layout discipline remains important because the output is intended for low-noise audio reproduction. Typical uses include CD and DVD player audio outputs, digital mixing consoles, powered speakers, soundbars, home-theater receivers, and other stereo digital-audio products. The PCM1733U/2K is especially appropriate when an existing design requires an 18-bit converter, 96 kHz operation, and a 14-pin SOIC footprint rather than a high-channel-count multichannel codec. Use the manufacturer pin-description table when assigning the 14 PCB lands and preserve the recommended analog and digital grounding arrangement. Input and output decoupling capacitors should be placed close to their associated pins, while the I2S data and clock traces should be routed away from the analog output region to reduce coupling. This product record combines the exact 18-bit, 96 kHz, I2S, 5 V, and 14-SOIC characteristics with package-aware alternatives, comparison parameters, and practical design guidance. It helps engineers identify whether the converter fits an existing audio board before committing to a new PCB layout.

RFQ پەیوەندی
PCM1737E - 24-Bit 192kHz Stereo DAC | Texas Instruments
PCM1737E

PCM1737E - 24-Bit 192kHz Stereo DAC | Texas Instruments

Texas Instruments PCM1737E is a 24-bit, 192kHz sampling stereo digital-to-analog converter with 106dB SNR, enhanced multi-level delta-sigma architecture, and I2S digital audio input. The device is offered in a 28-pin SSOP package identified as DB by Texas Instruments. An audio DAC is an interface integrated circuit that converts digital audio samples into left- and right-channel analog voltage signals. Within the broader signal-chain hierarchy, a DAC sits between a digital audio source and an analog amplifier or audio output stage. The PCM1737E is designed for high-resolution stereo playback where 24-bit word length, 192kHz sampling support, and low-noise reconstruction are important. Key features include 24-bit resolution, sampling rates up to 192kHz, 106dB signal-to-noise ratio, stereo output, and I2S-compatible digital audio data input. Its SoundPlus branding identifies the device as an enhanced multi-level, delta-sigma audio converter. The 28-pin SSOP package provides a surface-mount option for compact consumer and professional audio equipment. Technically, the PCM1737E uses an enhanced multi-level delta-sigma conversion structure to reconstruct analog audio from digital PCM samples. This architecture supports high-resolution audio while maintaining the straightforward digital and analog interfaces expected from a dedicated stereo DAC. The verified manufacturer information identifies the PCM1737 family as a 24-bit converter capable of 192kHz sampling, with a specified SNR of 106dB. Typical uses include CD and DVD player analog-output stages, digital audio amplifiers, home-theater receivers, professional audio equipment, and other stereo systems that accept I2S audio data. In these systems, the PCM1737E can receive digital audio from a decoder or audio processor and provide differential or single-ended analog outputs to subsequent amplification circuitry, subject to the complete manufacturer application configuration. A primary design consideration is verifying the exact package pinout, analog output configuration, digital interface timing, and required external components against the manufacturer datasheet before layout. Because the supplied web results confirm the 28-pin SSOP package but do not expose the complete numbered pin table, no pin assignments are asserted here. PCB design should preserve the manufacturer's recommended grounding, decoupling, and analog-output layout practices. This product record combines verified manufacturer specifications, distributor identification, packaging information, and carefully qualified replacement guidance. It also separates confirmed drop-in findings from packaging-only ordering variants so engineers can assess board-level interchangeability without confusing reel or carrier codes with distinct converter designs.

RFQ پەیوەندی
PCM1737E/2K - 24-Bit 192kHz Stereo DAC | Texas Instruments
PCM1737E/2K

PCM1737E/2K - 24-Bit 192kHz Stereo DAC | Texas Instruments

Texas Instruments PCM1737E/2K is a 24-bit, 192 kHz sampling stereo audio digital-to-analog converter with 106 dB signal-to-noise ratio, housed in a 28-pin SSOP package. The /2K ordering suffix specifies a 2000-piece tape-and-reel shipment, making the device suitable for high-volume automated production. An audio DAC is a mixed-signal semiconductor that converts digital audio samples into an analog voltage suitable for driving an audio output stage. In the broader hierarchy, PCM1737E/2K belongs to the digital-to-analog converter class within interface ICs, which sits within the broader semiconductor and signal-conversion product categories. Its role is to reconstruct left and right audio channels from digital words received from an audio processor, digital audio receiver, or other digital source. The converter supports 24-bit digital audio data at a maximum sampling rate of 192 kHz. Listings also identify I2S-compatible operation and the enhanced multi-level delta-sigma architecture. The 106 dB SNR rating describes the signal-to-noise performance of the analog output stage, while the 192 kHz capability permits high-resolution playback of lossless PCM material and compatibility with professional 48 kHz, 96 kHz, and 192 kHz workflows. The PCM1737 uses separate analog and digital supply domains, allowing the system designer to manage analog and digital power rails independently. Independent rail management can reduce ground-current interaction between switching circuitry and the sensitive analog output section. The SSOP package provides a compact 28-pin implementation, although its lead pitch requires careful assembly planning and adequate spacing between neighboring components. Typical uses include network audio receivers, home-theater audio processors, CD and DVD players, digital mixing consoles, active speakers, soundbar signal paths, and multi-channel audio equipment. The 24-bit resolution and 192 kHz sampling rate are particularly useful when the product must accept high-rate I2S audio from a digital audio host while preserving a compact stereo output stage. When laying out the board, route the digital I2S signals away from the analog outputs and place analog filtering components close to the output pins. Keep switching-regulator inductors and high-current digital paths on the opposite side of the board where practical. Use a clean analog ground strategy, minimize loop area around the DAC and its output network, and follow the manufacturer reference layout for power, ground, and decoupling connections. This page combines the manufacturer device information with package, ordering, interface, and replacement guidance. It identifies genuine same-footprint choices while highlighting the differences that must be checked before substituting an audio converter in a finished design.

RFQ پەیوەندی
PCM1737EG4 24-Bit Stereo DAC, 192 kHz, 28-SSOP | TI
PCM1737EG4

PCM1737EG4 24-Bit Stereo DAC, 192 kHz, 28-SSOP | TI

The Texas Instruments PCM1737EG4 is a 24-bit stereo digital-to-analog converter with a 192 kHz sampling-rate capability, packaged in a 28-SSOP. The PCM1737EG4 belongs to the broader digital-to-analog converter hierarchy, where it converts digital audio data into left- and right-channel analog signals for audio reproduction, mixing, and signal-processing equipment. A digital-to-analog converter, or DAC, reconstructs continuous analog waveforms from coded digital samples. Audio-capable DACs combine a multibit conversion core with digital audio interfaces, clocking, filtering, and output circuitry. The PCM1737EG4 is designed for stereo audio conversion where a compact surface-mount package, 24-bit resolution, and high-rate operation are important. The principal identified features of PCM1737EG4 are 24-bit resolution, operation up to 192 kHz, and a 28-SSOP package. One product description identifies the converter as a 96 kHz stereo DAC, while another identifies the family as supporting 192 kHz sampling. Engineers should therefore use the PCM1737EG4 manufacturer datasheet for the exact supported data and clock-rate modes of the installed device. The 28-SSOP package uses gull-wing leads and a stated width of 5.30 mm, making it suitable for conventional surface-mount PCB assembly. Its commercial temperature grade and digital audio conversion function distinguish it from general-purpose analog-to-digital converters and from lower-resolution legacy audio interfaces. Typical uses include stereo audio digital-to-analog conversion, multimedia playback, active speaker systems, digital mixing consoles, and embedded audio equipment. In each case, the device can receive digital audio samples and provide differential or single-ended analog outputs according to the interface and output configuration specified by the manufacturer. PCB design should preserve clean analog and digital separation, provide a low-impedance return path for all supply and ground pins, and place input and output capacitors close to their associated pins. Clock and data traces should be routed away from analog output nodes to reduce jitter pickup and unwanted coupling. This page combines the verified PCM1737EG4 package, format, sampling-rate, and commercial-grade information with component comparisons, sourcing guidance, and practical integration notes. It also distinguishes confirmed pin-compatible options from alternatives that require changes to the PCB or audio interface.

RFQ پەیوەندی
PCM1738E - 24-Bit 200kHz Stereo Audio DAC | Texas Instruments
PCM1738E

PCM1738E - 24-Bit 200kHz Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1738E is a 24-bit stereo audio digital-to-analog converter (DAC) supporting sampling rates up to 200 kHz in a 28-pin SSOP package. The device uses CMOS monolithic integrated-circuit technology and an advanced segment DAC architecture designed for high-performance audio and multimedia signal conversion. According to the Texas Instruments PCM1738 product page, the converter includes two stereo DAC channels, support circuitry, and balanced current outputs. The balanced-output architecture allows the converter to drive external audio stages through an appropriate output network. The PCM1738E is supplied in the 28-SSOP package, matching the PCM1738 family identified by DigiKey and Mouser. The converter operates from a single 4.75 V to 5.25 V supply according to the verified distributor data, and the PCM1738 family is specified for 192-kHz sampling in the manufacturer product description. Its advanced segment DAC architecture is intended to provide excellent dynamic performance and improved tolerance to clock jitter, making the device useful in digital audio equipment, multimedia systems, and other applications requiring accurate stereo reconstruction. The PCM1738E is also associated with the PCM1738E/2K ordering code shown in the verified distributor data; the /2K designation is an ordering/package-related identifier rather than a separate functional variant. When selecting the device, engineers should confirm the complete clock, digital-interface, analog-output, and power-supply requirements against the manufacturer datasheet. The PCM1738E is intended for designs requiring a high-resolution stereo DAC rather than a low-cost consumer-output codec.

RFQ پەیوەندی
PCM1738E/2K - 24-Bit 192kHz Stereo Audio DAC | TI
PCM1738E/2K

PCM1738E/2K - 24-Bit 192kHz Stereo Audio DAC | TI

Texas Instruments PCM1738E/2K is a 24-bit stereo digital-to-analog converter with a 192 kHz sampling rate, housed in a 28-pin SSOP (DB) package. It uses advanced-segment DAC architecture to deliver 117 dB signal-to-noise ratio and balanced current outputs for high-performance audio signal chains. The device supports digital audio data transfer through a serial interface and is designed for applications requiring precise stereo conversion. An audio DAC is a data converter that transforms digital audio samples into analog voltage or current signals for downstream amplification, filtering, mixing, or line output. The PCM1738 belongs to the digital-to-analog converter category, within the broader ADC/DAC and signal-conversion semiconductor hierarchy. Its stereo architecture converts two audio channels, while the balanced current outputs provide a flexible foundation for analog output stages. Key features include 24-bit resolution, operation up to 192 kHz, 117 dB SNR, advanced-segment conversion architecture, and balanced current outputs. The 192 kHz capability accommodates high-resolution source material, while 24-bit word length preserves fine amplitude detail. The 117 dB SNR rating describes the converter's signal-to-noise performance, making the device suitable for premium consumer audio, professional playback, and other applications where low-level analog signals must remain distinguishable from system noise. Internally, the converter employs a delta-sigma-based architecture, a common approach in high-resolution audio DACs because it supports high linearity, digital noise shaping, and flexible clocking. The advanced-segment architecture is intended to improve dynamic performance and clock-jitter tolerance. A serial three-wire interface reduces the number of required digital connections, while the stereo current-output topology gives the board designer control over the final analog signal path. Typical uses include high-resolution stereo playback, CD and DVD audio systems, digital mixing consoles, professional monitor controllers, and multichannel audio equipment requiring accurate conversion of separate left and right channels. The balanced current outputs can feed an appropriate current-to-voltage and reconstruction network or a downstream audio amplifier stage. Board-level implementation still depends on the clock source, digital interface, output topology, and filtering specified by the manufacturer. A critical design consideration is to follow the manufacturer datasheet for clock requirements, analog output components, decoupling, and printed-circuit-board layout. Keep digital-clock and sensitive analog routing separated, place decoupling capacitors close to the supply pins, and use a symmetrical output network to minimize channel mismatch. The exact footprint, exposed connections, and analog output implementation should be verified against the device's package drawing before layout is released.

RFQ پەیوەندی
PCM1738EG4 - 24-Bit Stereo Audio DAC | Texas Instruments
PCM1738EG4

PCM1738EG4 - 24-Bit Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1738EG4 is a 24-bit stereo audio digital-to-analog converter DAC with a sampling rate of up to 192 kHz, housed in a 28-pin SSOP package. The device uses a two-channel delta-sigma architecture and a serial three-wire digital audio interface for compact audio signal-processing designs. An audio DAC is a data converter that transforms digital audio samples into analog voltage signals suitable for amplification, headphone drive, line output, or further signal conditioning. The PCM1738 belongs to the DAC and audio converter hierarchy within integrated circuits, where precision sample reconstruction and low-noise analog output are central requirements. Key features of the PCM1738EG4 include 24-bit resolution, stereo operation, support for serial digital audio data, and operation from a 4.75 V to 5.25 V supply range. Its 28-SSOP package, identified as 0.209 inch or 5.30 mm wide in the component listing, supports compact surface-mount layouts. The EG4 suffix denotes the tape-and-reel ordering configuration. The converter uses a delta-sigma architecture to provide high-resolution digital audio reconstruction. The serial interface reduces the number of interconnects required when the DAC is connected to an audio codec, digital signal processor, USB audio interface, or embedded audio controller. This makes the device suitable for structured multichannel audio systems where channel synchronization and compact implementation are important. Typical applications include consumer audio equipment, digital mixing consoles, active speakers, multimedia systems, and embedded audio platforms. The 192 kHz sampling-rate capability supports high-resolution audio workflows, while the 24-bit data width provides a 16,777,216-level representation for each digital sample. The primary design consideration is correct implementation of the digital interface, analog output filtering, power-supply decoupling, and signal routing. Keep analog and digital return paths separated as far as practical, place bypass capacitors close to the supply pins, and follow the manufacturer datasheet when selecting external filter components. Verify the exact pin assignments and recommended application circuit before PCB release.

RFQ پەیوەندی
PCM1739E - 24-Bit 192kHz Stereo Audio DAC | Texas Instruments
PCM1739E

PCM1739E - 24-Bit 192kHz Stereo Audio DAC | Texas Instruments

Texas Instruments PCM1739E is a 24-bit, 192kHz sampling enhanced multi-level delta-sigma stereo digital-to-analog converter with 105dB typical signal-to-noise ratio, supplied in a 28-pin SSOP package. It converts two digital audio channels into left and right analog outputs and uses SoundPlus technology for high-fidelity playback systems. A digital-to-analog converter, or DAC, is a semiconductor that transforms digital audio samples into continuous analog voltage signals. In the signal-chain hierarchy, the PCM1739E belongs to the ADC/DAC class within interface ICs, where it follows the digital audio source and precedes an analog output amplifier, headphone driver, mixer, or loudspeaker system. Its delta-sigma architecture and multi-level quantization are intended to reduce quantization noise while preserving high-resolution audio data. The verified product information identifies a 24-bit resolution, maximum sampling rate of 192kHz, 105dB typical SNR, and stereo output configuration. A related manufacturer datasheet listing gives 106dB typical dynamic range, 105dB typical SNR, 0.0015% typical THD+N with a 5V supply, 3.1Vpk-pk typical full-scale output, 4-times and 8-times oversampling, a 0.454fS digital-filter passband, and -82dB stopband attenuation. PCM1739E is appropriate for consumer-audio equipment, USB and digital-audio interface boards, active speakers, compact home-theater systems, and audio conversion modules requiring simultaneous left and right outputs. Its 192kHz sampling capability supports high-resolution source material, while the stated SNR and distortion figures establish the signal-quality baseline for the analog output stage. Designers should treat the DAC output as a line-level signal requiring suitable analog amplification and output coupling. The manufacturer datasheet indicates analog testing with a load of 5kΩ or larger and an AC-coupled output. Decoupling, grounding, clock-interface layout, and output-filter implementation therefore remain important to preserving the converter's measured performance. This page combines the verified Texas Instruments product information, distributor listings, and cross-reference data with practical selection guidance. It also distinguishes documented drop-in candidates from merely similar audio converters, helping engineers evaluate replacement risk before modifying an existing 28-pin SSOP PCB.

RFQ پەیوەندی